From 5e86877f36b0d95127dcef8ed3abf78ecd78061d Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 8 Jul 2020 20:48:57 +0200 Subject: ath79: correctly define WiFi switch for TL-WR841ND v8 The TL-WR841ND v8 feature a WiFi switch instead of a button. This adds the corresponding input-type to prevent booting into failsafe regularly. This has been defined correctly in ar71xx, but was overlooked when migrating to ath79. In contrast, the TL-WR842ND v2, which has the key set up as switch in ar71xx, actually has a button. The TL-MR3420 v2 has a button as well and is set up correctly for both targets. (Information based on TP-Link user guide) Note: While looking into this, I found that support PR for TL-MR3420 v2 switched reset button to ACTIVE_HIGH. However, the other two device still use ACTIVE_LOW. This seems strange, but I cannot verify it lacking the affected devices. Fixes: FS#2733 Fixes: 9601d94138de ("add support for TP-Link TL-WR841N/ND v8") Signed-off-by: Adrian Schmutzler --- .../linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts | 23 +++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts') diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts b/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts index f864381520..e6cf6ef863 100644 --- a/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts +++ b/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts @@ -6,14 +6,23 @@ / { model = "TP-Link TL-MR3420 v2"; compatible = "tplink,tl-mr3420-v2", "qca,ar9341"; -}; -&keys { - reset { - label = "Reset"; - linux,code = ; - gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; + keys { + compatible = "gpio-keys"; + + rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + reset { + label = "Reset/WPS"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; }; }; -- cgit v1.2.3