From 8288af1e18adfe68bc556df93521881d1e5d0eda Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Thu, 2 Aug 2018 15:14:10 +0800 Subject: ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo --- .../ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi | 157 +++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi (limited to 'target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi') diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi new file mode 100644 index 0000000000..9d8c1a022e --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + compatible = "tplink,tl-wr741n-v4", "qca,ar9331"; + model = "TP-Link TL-WR741N/ND v4"; + + aliases { + serial0 = &uart; + led-status = &led_system; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&switch_led_pins>; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + lan2 { + label = "tp-link:green:lan2"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + lan3 { + label = "tp-link:green:lan3"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + lan4 { + label = "tp-link:green:lan4"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + qss { + label = "tp-link:green:qss"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + led_system: system { + label = "tp-link:green:system"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "tp-link:green:wan"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "tp-link:green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + firmware: partition@20000 { + reg = <0x20000 0x3d0000>; + label = "firmware"; + }; + + art: partition@3f0000 { + reg = <0x3f0000 0x10000>; + label = "art"; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <1>; + switch-phy-swap = <1>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; +}; + +&gpio { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; -- cgit v1.2.3