From 8b0278a17eea57558ff38e825f37c538af3827e2 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 18 Aug 2020 13:49:15 +0200 Subject: ath79: add support for TP-Link TL-WR710N v2.1 This adds support for the TP-Link TL-WR710N v2.1. It is basically a re-issue of the v1.2. Specifications: SoC: Atheros AR9331 CPU: 400 MHz Flash: 8 MiB RAM: 32 MiB WiFi: 2.4 GHz b/g/n Ethernet: 2x 100M ports USB: 1x 2.0 The only difference from the v1 is the TP-Link hardware ID/revision. Attention: The TL-WR710N v2.0 (!) has only 4 MB flash and cannot be flashed with this image. It has a different TPLINK_HWREV, so accidental flashing of the factory image should be impossible without additional measures. Unfortunately, the v2.0 in ar71xx has the same board name, so sysupgrade from ar71xx v2.0 into ath79 v1/v2.1 will not be prevented, but will brick the device. Flashing instruction: Upload the factory image via the OEM firmware GUI upgrade mechanism. Further notes: To make implementation easier if somebody desires to port the 4M v2.0, this already creates two DTSI files. Signed-off-by: Adrian Schmutzler Tested-by: Fabian Eppig (backported from eb531337a779a48a2d17bc66f0d222325d6c1563) --- target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts (limited to 'target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts') diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts new file mode 100644 index 0000000000..48d44000ee --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9331_tplink_tl-wr710n-8m.dtsi" + +/ { + model = "TP-Link TL-WR710N v2.1"; + compatible = "tplink,tl-wr710n-v2.1", "qca,ar9331"; +}; -- cgit v1.2.3