From 8ba76d6e744f2f2fb5afb9fd8ac2b828d7c8387c Mon Sep 17 00:00:00 2001
From: Paul Wassi <p.wassi@gmx.at>
Date: Sun, 30 Dec 2018 21:37:50 +0100
Subject: ath79: fix boardname of GL.iNet GL-AR150

This device is called GL-AR150, therefore rename the board
to 'gl-ar150'

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
---
 target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts | 145 ++++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts

(limited to 'target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts')

diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
new file mode 100644
index 0000000000..53df36760f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9330.dtsi"
+
+/ {
+	model = "GL.iNet GL-AR150";
+	compatible = "glinet,gl-ar150", "qca,ar9330";
+
+	aliases {
+		serial0 = &uart;
+		led-boot = &wlan;
+		led-failsafe = &wlan;
+		led-upgrade = &wlan;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan: wlan {
+			label = "gl-ar150:orange:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		lan {
+			label = "gl-ar150:green:lan";
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "gl-ar150:green:wan";
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		manual {
+			label = "manual";
+			linux,code = <BTN_7>;
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		auto {
+			label = "auto";
+			linux,code = <BTN_8>;
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+	gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@1 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+			};
+
+			partition@2 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x050000 0xfa0000>;
+			};
+
+			art: partition@3 {
+				label = "ART";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x0>;
+
+	gmac-config {
+		device = <&gmac>;
+
+		switch-phy-addr-swap = <0>;
+		switch-phy-swap = <0>;
+	};
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x0>;
+};
-- 
cgit v1.2.3