From 0ff5785c5d5e57d99acb8da06d2c08903448b663 Mon Sep 17 00:00:00 2001
From: Mathias Kresin <dev@kresin.me>
Date: Tue, 8 May 2018 07:22:38 +0200
Subject: ath79: fix dts files

Add the SoC compatible to the individual dts files. Rename the dts files
to match the common pattern.

Remove dts files wich aren't used and no image in ar71xx exists.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---
 target/linux/ath79/dts/ar7241_ubnt_xm.dtsi | 153 +++++++++++++++++++++++++++++
 1 file changed, 153 insertions(+)
 create mode 100644 target/linux/ath79/dts/ar7241_ubnt_xm.dtsi

(limited to 'target/linux/ath79/dts/ar7241_ubnt_xm.dtsi')

diff --git a/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
new file mode 100644
index 0000000000..bea9adc5d4
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7241.dtsi"
+
+/ {
+	compatible = "ubnt,xm", "qca,ar7241";
+	model = "Ubiquiti Networks XM (rev 1.0) board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+/*	extosc: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+*/
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		poll-interval = <20>;
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "ubnt:red:link1";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led@1 {
+			label = "ubnt:orange:link2";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led@2 {
+			label = "ubnt:green:link3";
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led@3 {
+			label = "ubnt:green:link4";
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+/*&pll {
+	clocks = <&extosc>;
+};*/
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l6405d";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@1 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+			};
+
+			partition@2 {
+				label = "firmware";
+				reg = <0x050000 0x750000>;
+			};
+
+			partition@3 {
+				label = "board_config";
+				reg = <0x7a0000 0x010000>;
+				read-only;
+			};
+
+			partition@4 {
+				label = "cfg";
+				reg = <0x7b0000 0x040000>;
+				read-only;
+			};
+
+			art: partition@5 {
+				label = "art";
+				reg = <0x7f0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	ath9k@0000 {
+		reg = <0x0000 0 0 0 0>;
+		qca,no-eeprom;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+		phy-mode = "mii";
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x0>;
+
+	phy-mode = "mii";
+	phy-handle = <&phy4>;
+};
+
+&eth1 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x6>;
+};
-- 
cgit v1.2.3