From c566439c9bf3cf2b4e5e5a059332c64199d97611 Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Sat, 8 Dec 2018 15:18:17 +0900 Subject: ath79: add support for NEC Aterm WG800HP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9563. Specification: - Qualcomm Atheros QCA9563 - 64 MB of RAM (DDR2) - 8 MB of Flash (SPI-NOR) - 2.4/5 GHz wifi - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 1T1R (QCA9887) - 4x 10/100/1000 Mbps Ethernet - 8x LEDs, 3x keys (2x buttons, 1x slide-switch) - UART through-hole on PCB (J2) - Vcc, GND, NC, TX, RX from SoC side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port on WG800HP 2. Connect power cable to WG800HP and turn on it 3. Access to "http://192.168.10.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- target/linux/ath79/base-files/etc/board.d/02_network | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'target/linux/ath79/base-files/etc/board.d/02_network') diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 1d6cd4e774..35eff1c8f8 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -89,6 +89,10 @@ ath79_setup_interfaces() glinet,gl-x750) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + nec,wg800hp) + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan" + ;; netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) @@ -238,6 +242,10 @@ ath79_setup_macs() lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) ;; + nec,wg800hp) + lan_mac=$(mtd_get_mac_text board_data 640) + wan_mac=$(mtd_get_mac_text board_data 1152) + ;; netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) -- cgit v1.2.3