From 4edadfb997824e93d34c6b76dbbe03821026ee23 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Wed, 18 Sep 2019 15:17:56 +0200 Subject: ath79: add support for Ubiquiti NanoStation Loco M (XW) This commit adds support for the NanoStation Loco M2/M5 XW devices on the ath79 target (support was long ago available on ar71xx). Specifications: - AR9342 SoC @ 535 MHz - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - AR8032 switch - 2T2R 5 GHz radio, 22 dBm - 13 dBi built-in antenna - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via TFTP: - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin Signed-off-by: Roger Pueyo Centelles (backported from commit 633c4304ad42d18d180ba65a264ba668de445d91) Signed-off-by: Adrian Schmutzler --- target/linux/ath79/base-files/etc/board.d/01_leds | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ath79/base-files/etc/board.d/01_leds') diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index f600c6f779..dd483c0526 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -201,6 +201,7 @@ tplink,tl-wr842n-v2) ubnt,bullet-m|\ ubnt,bullet-m-xw|\ ubnt,nanostation-loco-m|\ +ubnt,nanostation-loco-m-xw|\ ubnt,nanostation-m|\ ubnt,nanostation-m-xw|\ ubnt,picostation-m|\ -- cgit v1.2.3