From 56231056ea784f1cec6450f649b1adaed1f56366 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 6 Sep 2007 16:27:37 +0000 Subject: strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX__ becomes CONFIG_TARGET_, same for profiles. SVN-Revision: 8653 --- .../patches-2.6.22/001-vlink-machine.patch | 246 --------------------- 1 file changed, 246 deletions(-) delete mode 100644 target/linux/at91-2.6/patches-2.6.22/001-vlink-machine.patch (limited to 'target/linux/at91-2.6/patches-2.6.22/001-vlink-machine.patch') diff --git a/target/linux/at91-2.6/patches-2.6.22/001-vlink-machine.patch b/target/linux/at91-2.6/patches-2.6.22/001-vlink-machine.patch deleted file mode 100644 index d52c4526ec..0000000000 --- a/target/linux/at91-2.6/patches-2.6.22/001-vlink-machine.patch +++ /dev/null @@ -1,246 +0,0 @@ -diff -urN linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S ---- linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 06:33:09.000000000 +0200 -+++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 06:39:45.000000000 +0200 -@@ -67,6 +67,12 @@ - cmp r7, r3 - beq 99f - -+ @ FDL Versalink : 1053 -+ mov r3, #(MACH_TYPE_VLINK & 0xff) -+ orr r3, r3, #(MACH_TYPE_VLINK & 0xff00) -+ cmp r7, r3 -+ beq 99f -+ - @ Ajeco 1ARM : 1075 - mov r3, #(MACH_TYPE_ONEARM & 0xff) - orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) -diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c ---- linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c 2007-07-29 06:40:47.000000000 +0200 -@@ -0,0 +1,191 @@ -+/* -+ * linux/arch/arm/mach-at91/board-vlink.c -+ * -+ * Copyright (C) 2005 SAN People -+ * Copyright (C) 2006,2007 Guthrie Consulting -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include "generic.h" -+ -+ -+/* -+ * Serial port configuration. -+ * 0 .. 3 = USART0 .. USART3 -+ * 4 = DBGU -+ */ -+static struct at91_uart_config __initdata vlink_uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 5, -+ .tty_map = { 4, 1, 0, 3, 2 } /* ttyS0, ..., ttyS4 */ -+}; -+ -+static void __init vlink_map_io(void) -+{ -+ /* Initialize processor: 18.432 MHz crystal */ -+ at91rm9200_initialize(18432000, AT91RM9200_PQFP); -+ -+ /* Setup the LEDs */ -+ at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&vlink_uart_config); -+} -+ -+static void __init vlink_init_irq(void) -+{ -+ at91rm9200_init_interrupts(NULL); -+} -+ -+static struct at91_eth_data __initdata vlink_eth_data = { -+ .phy_irq_pin = AT91_PIN_PC4, -+ .is_rmii = 1, -+}; -+ -+static struct at91_usbh_data __initdata vlink_usbh_data = { -+ .ports = 1, -+}; -+ -+/* -+static struct at91_udc_data __initdata vlink_udc_data = { -+ .vbus_pin = AT91_PIN_PD4, -+ .pullup_pin = AT91_PIN_PD5, -+}; -+*/ -+ -+static struct at91_mmc_data __initdata vlink_mmc_data = { -+// .det_pin = AT91_PIN_PB27, -+ .slot_b = 0, -+ .wire4 = 1, -+// .wp_pin = AT91_PIN_PA17, -+}; -+ -+static struct spi_board_info vlink_spi_devices[] = { -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ }, -+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -+ { /* DataFlash card */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 3, -+ .max_speed_hz = 15 * 1000 * 1000, -+ }, -+#endif -+}; -+ -+/*static struct at91_gpio_led vlink_leds[] = { -+ { -+ .name = "led0", -+ .gpio = AT91_PIN_PC14, -+ .trigger = "heartbeat", -+ }, -+ { -+ .name = "led1", -+ .gpio = AT91_PIN_PC15, -+ .trigger = "timer", -+ } -+}; -+*/ -+ -+static void __init vlink_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* Ethernet */ -+ at91_add_device_eth(&vlink_eth_data); -+ /* USB Host */ -+ at91_add_device_usbh(&vlink_usbh_data); -+ /* USB Device */ -+// at91_add_device_udc(&vlink_udc_data); -+// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ -+ /* I2C */ -+ at91_add_device_i2c(); -+ /* SPI */ -+ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices)); -+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -+ /* DataFlash card */ -+// at91_set_gpio_output(AT91_PIN_PB22, 0); -+#else -+ /* MMC */ -+// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ -+ at91_add_device_mmc(0, &vlink_mmc_data); -+#endif -+ /* LEDs */ -+// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); -+ -+/* Other LED's */ -+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1 -+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1 -+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1 -+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1 -+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2 -+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2 -+ -+/* SIM Cards */ -+ at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3 -+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2 -+ at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1 -+ -+/* GSM Module Control */ -+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF -+ -+/* Test jig presence detection */ -+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT -+ -+/* Power indicator */ -+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND -+ -+/* USB Device control */ -+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX -+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP -+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive -+ -+} -+ -+MACHINE_START(VLINK, "FDL VersaLink") -+ /* Maintainer: Guthrie Consulting */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91rm9200_timer, -+ .map_io = vlink_map_io, -+ .init_irq = vlink_init_irq, -+ .init_machine = vlink_board_init, -+MACHINE_END -diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig linux-2.6.22.1/arch/arm/mach-at91/Kconfig ---- linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig 2007-07-29 06:33:09.000000000 +0200 -+++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig 2007-07-29 06:42:19.000000000 +0200 -@@ -103,6 +103,12 @@ - help - Select this if you are using Promwad's Chub board. - -+config MACH_VLINK -+ bool "Figment Design Labs VersaLink" -+ depends on ARCH_AT91RM9200 -+ help -+ Select this if you are using FDL's VersaLink board -+ - endif - - # ---------------------------------------------------------- -diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile ---- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile 2007-07-29 06:33:09.000000000 +0200 -+++ linux-2.6.22.1/arch/arm/mach-at91/Makefile 2007-07-29 06:43:36.000000000 +0200 -@@ -29,6 +29,7 @@ - obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o - obj-$(CONFIG_MACH_KAFA) += board-kafa.o - obj-$(CONFIG_MACH_CHUB) += board-chub.o -+obj-$(CONFIG_MACH_VLINK) += board-vlink.o - obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o - - # AT91SAM9260 board-specific support -@@ -52,6 +53,7 @@ - led-$(CONFIG_MACH_CSB637) += leds.o - led-$(CONFIG_MACH_KB9200) += leds.o - led-$(CONFIG_MACH_KAFA) += leds.o -+led-$(CONFIG_MACH_VLINK) += leds.o - obj-$(CONFIG_LEDS) += $(led-y) - - # VGA support -- cgit v1.2.3