From 68b5d34f69421264de6e5d77760fcc2bfe9ee687 Mon Sep 17 00:00:00 2001 From: Mantas Pucka Date: Mon, 8 May 2017 13:28:38 +0300 Subject: ar71xx: add support for 8devices Rambutan development board Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/nand/config-default | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/nand/config-default') diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 1c5d0baa98..9b57f9047b 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -106,6 +106,7 @@ # CONFIG_ATH79_MACH_PQI_AIR_PEN is not set # CONFIG_ATH79_MACH_QIHOO_C301 is not set # CONFIG_ATH79_MACH_R602N is not set +CONFIG_ATH79_MACH_RAMBUTAN=y # CONFIG_ATH79_MACH_RE450 is not set # CONFIG_ATH79_MACH_RW2458N is not set # CONFIG_ATH79_MACH_SC1750 is not set -- cgit v1.2.3