From 56561b9f5198d39604809e5cc10dead3e12c1fdf Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Fri, 10 Feb 2017 13:44:06 +0100 Subject: ar71xx: add support for TP-Link TL-WA850RE v2 TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender, based on Qualcomm/Atheros QCA9533 v2. Short specification: - 550/391/195 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 32 MB of RAM (DDR1) - 4 MB of FLASH - 2T2R 2.4 GHz - 2x internal antennas (embedded on PCB) - 9x LED (all can be turned off with GPIO15), 2x button - UART (J3) header on PCB Flash instruction: use "factory" image directly in vendor GUI. Warning: this device does not include any kind of recovery mechanism in the bootloader and disassembling process is not trivial. You can access vendor firmware over serial line using: - login: root - password: sohoadmin Image was tested only in US version of the device, but should work also with the same device version sold in other countries. Available FLASH space, with LEDE trunk, is only 240 KB. Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/nand/config-default | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/nand/config-default') diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 1cad3a06e1..3d3e256c83 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -124,6 +124,7 @@ # CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set # CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set # CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set +# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set # CONFIG_ATH79_MACH_TL_WA901ND is not set # CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set # CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set -- cgit v1.2.3