From dc4eae7a8cf676911b0048b1e73c6f9adeea2f06 Mon Sep 17 00:00:00 2001 From: Christian Mehlis Date: Sun, 26 Feb 2017 12:25:57 +0100 Subject: ar71xx: Compex WPJ563 support Specification: - SoC: Qualcomm Atheros QCA9563 (775 MHz, MIPS 74Kc) - RAM: 128 MiB - Storage: 16MB NOR flash - Wireless: Built into QCA9563 (Dragonfly), PHY modes b/g/n, 3x3 MIMO - Ethernet: 2x1G Tested and working: - ethernet / switch / lan / wan - 2.4GHz SoC wifi - PCIe - leds - buzzer Ramload: - tftpboot 0x84000000 lede-ar71xx-generic-wpj563-16M-initramfs-uImage.bin - bootm 0x84000000 Install: - tftpboot 0x80500000 lede-ar71xx-generic-wpj563-16M-squashfs-sysupgrade.bin - erase 0x9f030000 +$filesize - erase 0x9f680000 +1 - cp.b $fileaddr 0x9f030000 $filesize Erasing 0x9f680000 is required because uboot defines "bootcmd=bootm 0x9f680000 || bootm 0x9f030000", so it first tries to boot the higher address. I think the 16 mb flash are intended to be used as 8+8mb for a fallback image. In my hardware only the lower address has a bootable image. But to make sure future hardware will boot lede too, I erase one block, so uboot will skip this address. Signed-off-by: Christian Mehlis --- target/linux/ar71xx/image/generic.mk | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'target/linux/ar71xx/image') diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 2ad058e845..ebcb183b03 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -825,3 +825,12 @@ define Device/wpj558 IMAGE_SIZE := 16128k endef TARGET_DEVICES += wpj558 + +define Device/wpj563 + DEVICE_TITLE := Compex WPJ563 (16MB flash) + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport + BOARDNAME := WPJ563 + MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro + IMAGE_SIZE := 16128k +endef +TARGET_DEVICES += wpj563 -- cgit v1.2.3