From e4d21e039947af35a6b85f92ce86e7be4beeaac3 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Dec 2009 15:07:34 +0000 Subject: ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater) SVN-Revision: 18621 --- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig | 4 + .../linux/ar71xx/files/arch/mips/ar71xx/Makefile | 1 + .../ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c | 317 +++++++++++++++++++++ target/linux/ar71xx/files/arch/mips/ar71xx/prom.c | 3 + .../arch/mips/include/asm/mach-ar71xx/ar71xx.h | 1 + 5 files changed, 326 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c (limited to 'target/linux/ar71xx/files') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 72c28b460d..37a0e014a2 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -10,6 +10,10 @@ config AR71XX_MACH_AP83 bool "Atheros AP83 board support" default y +config AR71XX_MACH_DIR825B1 + bool "D-Link DIR-825 rev. B1 board support" + default y + config AR71XX_MACH_PB42 bool "Atheros PB42 board support" default y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index 71ba835dcf..d77438fbe6 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o +obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c new file mode 100644 index 0000000000..dbf244c25a --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c @@ -0,0 +1,317 @@ +/* + * D-Link DIR-825 rev. B1 board support + * + * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o. + * + * based on mach-wndr3700.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "devices.h" + + +#define DIR825B1_GPIO_LED_BLUE_USB 0 +#define DIR825B1_GPIO_LED_ORANGE_POWER 1 +#define DIR825B1_GPIO_LED_BLUE_POWER 2 +#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4 +#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 +#define DIR825B1_GPIO_LED_BLUE_PLANET 11 + +#define DIR825B1_GPIO_BTN_RESET 3 +#define DIR825B1_GPIO_BTN_POWERSAVE 8 + +#define DIR825B1_BUTTONS_POLL_INTERVAL 20 + + +#define DIR825B1_CAL_LOCATION_0 0xbf661000 +#define DIR825B1_CAL_LOCATION_1 0xbf665000 + +#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8 +#define DIR825B1_MAC_LOCATION_1 0x2ffa8370 + + +static struct ath9k_platform_data dir825b1_wmac0_data; +static struct ath9k_platform_data dir825b1_wmac1_data; +static char dir825b1_wmac0_mac[6]; +static char dir825b1_wmac1_mac[6]; + + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir825b1_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = 0x050000, + .size = 0x610000, + } , { + .name = "caldata", + .offset = 0x660000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + + +static struct flash_platform_data dir825b1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir825b1_partitions, + .nr_parts = ARRAY_SIZE(dir825b1_partitions), +#endif +}; + + +static struct spi_board_info dir825b1_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &dir825b1_flash_data, + } +}; + + +static struct gpio_led dir825b1_leds_gpio[] __initdata = { + { + .name = "dir825b1:blue:usb", + .gpio = DIR825B1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, { + .name = "dir825b1:orange:power", + .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:power", + .gpio = DIR825B1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:powersave", + .gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE, + .active_low = 1, + }, { + .name = "dir825b1:orange:planet", + .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, + .active_low = 1, + }, { + .name = "dir825b1:blue:planet", + .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + } +}; + + +static struct gpio_button dir825b1_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .threshold = 5, + .gpio = DIR825B1_GPIO_BTN_RESET, + .active_low = 1, + } , { + .desc = "powersave", + .type = EV_KEY, + .code = BTN_1, + .threshold = 5, + .gpio = DIR825B1_GPIO_BTN_POWERSAVE, + .active_low = 1, + } +}; + + +#ifdef CONFIG_PCI +static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + } +}; + + +static int dir825b1_pci_plat_dev_init(struct pci_dev *dev) +{ + switch(PCI_SLOT(dev->devfn)) + { + case 17: + dev->dev.platform_data = &dir825b1_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &dir825b1_wmac1_data; + break; + } + + return(0); +} + + +static void dir825b1_pci_fixup(struct pci_dev *dev) +{ + void __iomem *mem; + u16 *cal_data; + u16 cmd; + u32 bar0; + u32 val; + + if (ar71xx_mach != AR71XX_MACH_DIR825B1) return; + + dir825b1_pci_plat_dev_init(dev); + cal_data = dev->dev.platform_data; + + if (*cal_data != 0xa55a) + { + printk(KERN_ERR "PCI: no calibration data found for %s\n", + pci_name(dev)); + return; + } + + mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); + if (!mem) + { + printk(KERN_ERR "PCI: ioremap error for device %s\n", + pci_name(dev)); + return; + } + + printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + + /* Setup the PCI device to allow access to the internal registers */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* set pointer to first reg address */ + cal_data += 3; + while (*cal_data != 0xffff) + { + u32 reg; + reg = *cal_data++; + val = *cal_data++; + val |= (*cal_data++) << 16; + + __raw_writel(val, mem + reg); + udelay(100); + } + + pci_read_config_dword(dev, PCI_VENDOR_ID, &val); + dev->vendor = val & 0xffff; + dev->device = (val >> 16) & 0xffff; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); + dev->revision = val & 0xff; + dev->class = val >> 8; /* upper 3 bytes */ + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + + iounmap(mem); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, + dir825b1_pci_fixup); + + +static void __init dir825b1_pci_init(void) +{ + memcpy(dir825b1_wmac0_data.eeprom_data, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), + sizeof(dir825b1_wmac0_data.eeprom_data)); + + memcpy(dir825b1_wmac1_data.eeprom_data, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), + sizeof(dir825b1_wmac1_data.eeprom_data)); + + memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6); + dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac; + memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); + dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac; + + ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs); +} +#else +static void __init dir825b1_pci_init(void) { } +#endif /* CONFIG_PCI */ + + +static void __init dir825b1_setup(void) +{ + u8 mac[6], i; + + memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); + for(i = 5; i >= 3; i--) + if(++mac[i] != 0x00) break; + + ar71xx_set_mac_base(mac); + + ar71xx_add_device_mdio(0x0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = 0x1E; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = 0xC0; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_spi(NULL, dir825b1_spi_info, + ARRAY_SIZE(dir825b1_spi_info)); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), + dir825b1_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(dir825b1_gpio_buttons), + dir825b1_gpio_buttons); + + ar71xx_add_device_usb(); + + dir825b1_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c index 4cc97632a3..ec7eed8e64 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c @@ -58,6 +58,9 @@ static struct board_rec boards[] __initdata = { }, { .name = "AW-NR580", .mach_type = AR71XX_MACH_AW_NR580, + }, { + .name = "DIR825B1", + .mach_type = AR71XX_MACH_DIR825B1, }, { .name = "TEW-632BRP", .mach_type = AR71XX_MACH_TEW_632BRP, diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h index 46629327c7..f26fc85ee7 100644 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h +++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h @@ -124,6 +124,7 @@ enum ar71xx_mach_type { AR71XX_MACH_AP81, /* Atheros AP81 */ AR71XX_MACH_AP83, /* Atheros AP83 */ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ + AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ -- cgit v1.2.3