From e7cd6f5d66b827e31cfa7e7bc019ac1b86aac770 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 30 Dec 2016 11:53:21 +0100 Subject: ar71xx: add AVM FRITZ!WLAN Repeater 300E support Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin --- .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 ++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-fritz300e.c | 132 +++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + 4 files changed, 143 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c (limited to 'target/linux/ar71xx/files/arch') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 6182a6f47f..0df5a88dc3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -2061,3 +2061,12 @@ config ATH79_MACH_TL_WPA8630 select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 select ATH79_DEV_WMAC + +config ATH79_MACH_FRITZ300E + bool "AVM FRITZ!WLAN Repeater 300E support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 5c22fafe51..5a848d0399 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -111,6 +111,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o +obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c new file mode 100644 index 0000000000..43af71a0a8 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c @@ -0,0 +1,132 @@ +/* + * AVM FRITZ!WLAN Repeater 300E board support + * + * Copyright (C) 2017 Mathias Kresin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */ +#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL) + +static struct mtd_partition fritz300e_flash_partitions[] = { + { + .name = "urloader", + .offset = 0, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0020000, + .size = 0x0ee0000, + }, { + .name = "tffs (1)", + .offset = 0x0f00000, + .size = 0x0080000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "tffs (2)", + .offset = 0x0f80000, + .size = 0x0080000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data fritz300e_flash_data = { + .parts = fritz300e_flash_partitions, + .nr_parts = ARRAY_SIZE(fritz300e_flash_partitions), +}; + +static struct gpio_led fritz300e_leds_gpio[] __initdata = { + { + .name = "fritz300e:green:power", + .gpio = 13, + .active_low = 1, + }, { + .name = "fritz300e:green:lan", + .gpio = 15, + .active_low = 1, + }, { + .name = "fritz300e:green:wlan", + .gpio = 16, + .active_low = 1, + } +}; + +static struct gpio_led fritz300e_wmac_leds_gpio[] = { + { + .name = "fritz300e:green:rssi0", + .gpio = 10, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi1", + .gpio = 4, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi2", + .gpio = 6, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi3", + .gpio = 7, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi4", + .gpio = 5, + .active_low = 1, + } +}; + +static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + }, +}; + +static void __init fritz300e_setup(void) +{ + /* get the Lantiq PEF7071V phy out of reset */ + gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset"); + + ath79_register_m25p80(&fritz300e_flash_data); + + ath79_register_mdio(0, ~(BIT(0))); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_register_eth(0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio), + fritz300e_leds_gpio); + ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fritz300e_gpio_keys), + fritz300e_gpio_keys); + + ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio, + ARRAY_SIZE(fritz300e_wmac_leds_gpio)); + ap91_pci_init_simple(); +} + +MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E", + "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 19d06c9834..8d0dfd662b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -103,6 +103,7 @@ enum ath79_mach_type { ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ + ATH79_MACH_FRITZ300E, /* AVM FRITZ!WLAN Repeater 300E */ ATH79_MACH_GL_AR150, /* GL-AR150 support */ ATH79_MACH_GL_AR300, /* GL-AR300 */ ATH79_MACH_GL_AR300M, /* GL-AR300M */ -- cgit v1.2.3