From cbc75a9c701a05686b67a754e83a710bca62c41f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 28 Apr 2011 21:27:42 +0000 Subject: ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config SVN-Revision: 26779 --- target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'target/linux/ar71xx/files/arch/mips') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c index 4a05f5bdca..e598ebc539 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c @@ -86,19 +86,14 @@ static void __init pb92_init(void) ar71xx_add_device_m25p80(&pb92_flash_data); - ar71xx_add_device_mdio(~0); + ar71xx_add_device_mdio(~BIT(0)); ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.speed = SPEED_1000; ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, ARRAY_SIZE(pb92_gpio_keys), -- cgit v1.2.3