From e33dcd1cfe105cb0e1ad09887144e4911eac653f Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Sat, 8 Oct 2016 03:36:35 +0200 Subject: ar71xx: add support for YunCore CPE830 CPE830 is a clone of AP90Q, with different type of antenna (panel) and additional 4 LEDs for WiFi signal level indication. Use the same flash approach as for YunCore AP90Q. Signed-off-by: Piotr Dymacz --- .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 ++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-ap90q.c | 130 ++++++++++++++++----- .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + 4 files changed, 115 insertions(+), 26 deletions(-) (limited to 'target/linux/ar71xx/files/arch/mips/ath79') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 6daa093a01..001edbeb17 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1211,6 +1211,15 @@ config ATH79_MACH_CPE510 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_CPE830 + bool "YunCore CPE830 support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_CPE870 bool "YunCore CPE870 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index b718d6bfd3..ac2dbbb23f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o +obj-$(CONFIG_ATH79_MACH_CPE830) += mach-ap90q.o obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c index 35e578122e..2e9d34d658 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c @@ -1,5 +1,7 @@ /* - * YunCore AP90Q board support + * Support for YunCore boards: + * - AP90Q + * - CPE830 * * Copyright (C) 2016 Piotr Dymacz * @@ -23,6 +25,7 @@ #include "dev-wmac.h" #include "machtypes.h" +/* AP90Q */ #define AP90Q_GPIO_LED_WAN 4 #define AP90Q_GPIO_LED_WLAN 12 #define AP90Q_GPIO_LED_LAN 16 @@ -61,40 +64,62 @@ static struct gpio_keys_button ap90q_gpio_keys[] __initdata = { }, }; -static void __init ap90q_gpio_setup(void) -{ - /* For LED on GPIO4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true); - ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true); - ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true); - - /* Mute LEDs on boot */ - gpio_set_value(AP90Q_GPIO_LED_LAN, 1); - gpio_set_value(AP90Q_GPIO_LED_WAN, 1); - - ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0); - ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0); - ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0); +/* CPE830 */ +#define CPE830_GPIO_LED_LINK4 0 +#define CPE830_GPIO_LED_LINK1 1 +#define CPE830_GPIO_LED_LINK2 2 +#define CPE830_GPIO_LED_LINK3 3 +#define CPE830_GPIO_LED_WAN 4 +#define CPE830_GPIO_LED_WLAN 12 +#define CPE830_GPIO_LED_LAN 16 - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio), - ap90q_leds_gpio); +#define CPE830_GPIO_BTN_RESET 17 - ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap90q_gpio_keys), - ap90q_gpio_keys); -} +static struct gpio_led cpe830_leds_gpio[] __initdata = { + { + .name = "cpe830:green:lan", + .gpio = CPE830_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "cpe830:green:wan", + .gpio = CPE830_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "cpe830:green:wlan", + .gpio = CPE830_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "cpe830:green:link1", + .gpio = CPE830_GPIO_LED_LINK1, + .active_low = 1, + }, + { + .name = "cpe830:green:link2", + .gpio = CPE830_GPIO_LED_LINK2, + .active_low = 1, + }, + { + .name = "cpe830:green:link3", + .gpio = CPE830_GPIO_LED_LINK3, + .active_low = 1, + }, + { + .name = "cpe830:green:link4", + .gpio = CPE830_GPIO_LED_LINK4, + .active_low = 1, + }, +}; -static void __init ap90q_setup(void) +static void __init ap90q_cpe830_common_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ath79_register_m25p80(NULL); - ap90q_gpio_setup(); - ath79_setup_ar933x_phy4_switch(false, false); ath79_register_mdio(0, 0x0); @@ -118,6 +143,59 @@ static void __init ap90q_setup(void) ath79_register_eth(0); ath79_register_wmac(art, NULL); + + /* For LED on GPIO4 */ + ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); + + ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true); + ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true); + ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true); + + /* Mute LEDs on boot */ + gpio_set_value(AP90Q_GPIO_LED_LAN, 1); + gpio_set_value(AP90Q_GPIO_LED_WAN, 1); + + ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0); + ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0); + ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0); + + ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap90q_gpio_keys), + ap90q_gpio_keys); +} + +static void __init ap90q_setup(void) +{ + ap90q_cpe830_common_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio), + ap90q_leds_gpio); } MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup); + +static void __init cpe830_setup(void) +{ + ap90q_cpe830_common_setup(); + + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK1, true); + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK2, true); + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK3, true); + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK4, true); + + /* Mute LEDs on boot */ + gpio_set_value(CPE830_GPIO_LED_LINK1, 1); + gpio_set_value(CPE830_GPIO_LED_LINK2, 1); + gpio_set_value(CPE830_GPIO_LED_LINK3, 1); + gpio_set_value(CPE830_GPIO_LED_LINK4, 1); + + ath79_gpio_output_select(CPE830_GPIO_LED_LINK1, 0); + ath79_gpio_output_select(CPE830_GPIO_LED_LINK2, 0); + ath79_gpio_output_select(CPE830_GPIO_LED_LINK3, 0); + ath79_gpio_output_select(CPE830_GPIO_LED_LINK4, 0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe830_leds_gpio), + cpe830_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_CPE830, "CPE830", "YunCore CPE830", cpe830_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 50ecff46f5..9a8da22f65 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -61,6 +61,7 @@ enum ath79_mach_type { ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */ ATH79_MACH_CPE210, /* TP-LINK CPE210 */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_CPE830, /* YunCore CPE830 */ ATH79_MACH_CPE870, /* YunCore CPE870 */ ATH79_MACH_CR3000, /* PowerCloud CR3000 */ ATH79_MACH_CR5000, /* PowerCloud CR5000 */ -- cgit v1.2.3