From 68b5d34f69421264de6e5d77760fcc2bfe9ee687 Mon Sep 17 00:00:00 2001 From: Mantas Pucka Date: Mon, 8 May 2017 13:28:38 +0300 Subject: ar71xx: add support for 8devices Rambutan development board Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz --- .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 +++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-rambutan.c | 90 ++++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + 4 files changed, 102 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c (limited to 'target/linux/ar71xx/files/arch/mips/ath79') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 7c3aa77a3e..eb8219e363 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1897,6 +1897,16 @@ config ATH79_MACH_LIMA select ATH79_DEV_WMAC select ATH79_DEV_ETH +config ATH79_MACH_RAMBUTAN + bool "8devices Rambutan board" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_CF_E316N_V2 bool "COMFAST CF-E316N v2 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 01ec1332b0..f503002288 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -137,6 +137,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o +obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c new file mode 100644 index 0000000000..103aeb44b9 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c @@ -0,0 +1,90 @@ +/* + * 8devices Rambutan board support + * + * Copyright (C) 2017 Mantas Pucka + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +static struct at803x_platform_data rambutan_ar8032_data = { + .has_reset_gpio = 1, + .reset_gpio = 17, +}; + +static struct mdio_board_info rambutan_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &rambutan_ar8032_data, + }, +}; + +static struct at803x_platform_data rambutan_ar8033_data = { + .has_reset_gpio = 1, + .reset_gpio = 23, +}; + +static struct mdio_board_info rambutan_mdio1_info[] = { + { + .bus_id = "ag71xx-mdio.1", + .phy_addr = 0, + .platform_data = &rambutan_ar8033_data, + }, +}; + +static void __init rambutan_setup(void) +{ + ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); + ath79_register_nfc(); + ath79_register_usb(); + ath79_register_pci(); + ath79_register_wmac_simple(); + + mdiobus_register_board_info(rambutan_mdio0_info, + ARRAY_SIZE(rambutan_mdio0_info)); + mdiobus_register_board_info(rambutan_mdio1_info, + ARRAY_SIZE(rambutan_mdio1_info)); + ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.phy_mask = BIT(0); + ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_eth1_pll_data.pll_1000 = 0x17000000; + ath79_eth1_pll_data.pll_10 = 0x1313; + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board", + rambutan_setup); + diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 694470d75b..4f0ae32d45 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -155,6 +155,7 @@ enum ath79_mach_type { ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ ATH79_MACH_R602N, /* P&W R602N */ ATH79_MACH_R6100, /* NETGEAR R6100 */ + ATH79_MACH_RAMBUTAN, /* 8devices Rambutan */ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ -- cgit v1.2.3