From 31952dbd1c40a2cd015ef435bd64fa9b2bb87eec Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Wed, 5 Oct 2016 02:24:58 +0200 Subject: ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N As we already have support for CF-E316N v2 and many devices from this vendor look similar, the support was included in existing mach-*.c file, with few cleanups and fixes. All 3 devices are based on Qualcomm/Atheros QCA9531 v2. COMFAST CF-E320N v2 is a ceiling mount AP with PoE support. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, both with PoE support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x RGB LED, 1x button - UART (J1), GPIO (J9) and USB (J2) headers on PCB - external watchdog (Pericon Technology PT7A7514) COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support. They seem to have different only the front panel. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, WAN with PoE support - 1x USB 2.0 (in CF-E520N covered by panel, available on PCB) - 32 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x LED, 1x button - UART (J1) headers on PCB Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz --- .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 32 +++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index ac8255b8a3..73f8d218c7 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1677,7 +1677,7 @@ config ATH79_MACH_CARAMBOLA2 select ATH79_DEV_WMAC config ATH79_MACH_CF_E316N_V2 - bool "COMFAST CF-E316N v2 board" + bool "COMFAST CF-E316N v2 support" select SOC_AR934X select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS @@ -1686,6 +1686,36 @@ config ATH79_MACH_CF_E316N_V2 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_CF_E320N_V2 + bool "COMFAST CF-E320N v2 support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_CF_E520N + bool "COMFAST CF-E520N support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_CF_E530N + bool "COMFAST CF-E530N support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_BHU_BXU2000N2_A bool "BHU BXU2000n-2 rev. A support" select SOC_AR934X -- cgit v1.2.3