From b23b0fb28b760ce66a8f93d4681c8bd300d75d30 Mon Sep 17 00:00:00 2001 From: Paul Wassi Date: Fri, 10 Nov 2017 22:18:09 +0100 Subject: ar71xx: add support for TP-Link TL-WR810N v2 TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi --- target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 + 2 files changed, 4 insertions(+) (limited to 'target/linux/ar71xx/base-files/lib') diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index fd3f94d220..7c381c00f3 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1160,6 +1160,9 @@ ar71xx_board_detect() { *"TL-WR810N") name="tl-wr810n" ;; + *"TL-WR810N v2") + name="tl-wr810n-v2" + ;; *"TL-WR840N v2") name="tl-wr840n-v2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index c798ebe843..210e4a2970 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -443,6 +443,7 @@ platform_check_image() { tl-wr802n-v1|\ tl-wr802n-v2|\ tl-wr810n|\ + tl-wr810n-v2|\ tl-wr840n-v2|\ tl-wr840n-v3|\ tl-wr841n-v1|\ -- cgit v1.2.3