From e07014e70bae07201844265d74f88234685e694c Mon Sep 17 00:00:00 2001 From: Ding Tengfei Date: Mon, 22 Jan 2018 14:57:57 +0800 Subject: ar71xx: add support for COMFAST CF-E355AC v2 COMFAST CF-E355AC v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9531 + QCA9886. Short specification: - 2x 10/100 Mbps Ethernet, with PoE support - 128MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, 802.11b/g/n - 2T2R 5 GHz, 802.11ac/n/a, WAVE 2 - built-in 4x 3 dBi antennas - output power (max): 500 mW (27 dBm) - 1x RGB LED, 1x button - built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei [updated kernel config for both boards] Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/base-files/etc/hotplug.d') diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b0ada3b342..f1301d0556 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -155,6 +155,7 @@ case "$FIRMWARE" in archer-c58-v1|\ archer-c59-v1|\ archer-c60-v1|\ + cf-e355ac-v2|\ cf-e375ac) ath10kcal_extract "art" 20480 12064 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ -- cgit v1.2.3