From 8c64824576598117958691853de68bf4dcfc3c06 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Thu, 15 Feb 2018 23:15:53 +0100 Subject: ar71xx: add support for GainStrong Oolite V5.2 GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 2 ++ 1 file changed, 2 insertions(+) (limited to 'target/linux/ar71xx/base-files/etc/hotplug.d/firmware') diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index e6ea873e40..c93ce2a614 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -75,6 +75,8 @@ case "$FIRMWARE" in dlan-pro-1200-ac|\ e1700ac-v2|\ e600gac-v2|\ + oolite-v5.2|\ + oolite-v5.2-dev|\ sr3200|\ xd3200) ath10kcal_extract "art" 20480 2116 -- cgit v1.2.3