From eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Sat, 8 Oct 2016 01:17:04 +0200 Subject: ar71xx: add support for YunCore CPE870 YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341. Short specification: - 535/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm - internal 14 dBi panel antenna - 8x LED, 1x button - UART (JP1) header on PCB Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. setenv bootcmd "bootm 0x9f020000" 5. saveenv && reset Vendor firmware access (login/password): Admin/5up Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/base-files/etc/diag.sh | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/base-files/etc/diag.sh') diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 0ef5a52a05..e619749609 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -48,6 +48,7 @@ get_status_led() { status_led="$board:green:power" ;; ap90q|\ + cpe870|\ gl-inet) status_led="$board:green:lan" ;; -- cgit v1.2.3