From b23b0fb28b760ce66a8f93d4681c8bd300d75d30 Mon Sep 17 00:00:00 2001 From: Paul Wassi Date: Fri, 10 Nov 2017 22:18:09 +0100 Subject: ar71xx: add support for TP-Link TL-WR810N v2 TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi --- target/linux/ar71xx/base-files/etc/board.d/02_network | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/base-files/etc/board.d') diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 78e04627ac..f8060f401c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -157,6 +157,7 @@ ar71xx_setup_interfaces() tl-wr710n|\ tl-wr720n-v3|\ tl-wr810n|\ + tl-wr810n-v2|\ wpe72|\ wrtnode2q) ucidef_set_interfaces_lan_wan "eth1" "eth0" -- cgit v1.2.3