From 83708f233daceacebd1c49da44711cc87b49162a Mon Sep 17 00:00:00 2001 From: Lech Perczak Date: Sun, 17 Nov 2019 20:57:10 +0100 Subject: ar71xx: ubnt-rocket-m-ti: fix RSSI LED definitions When mapping for RSSI LEDs was defined for interface wlan0 on Ubiquiti Rocket M Titanium, it missed connection to actual interface. Therefore create the mapping to interface, so RSSI LEDs work without additional configuration, after starting rssileds service. While at that, split RSSI into ~equal intervals for 6 LEDs, and remove coefficients needed for PWM LEDs, as this board does not support PWM LEDs. Finally, for complete support, enable 'rssileds' package in per-device rootfs, so the indicator works out of box. Signed-off-by: Lech Perczak --- target/linux/ar71xx/base-files/etc/board.d/01_leds | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'target/linux/ar71xx/base-files/etc/board.d/01_leds') diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 0a63820de7..54727a6e52 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -724,12 +724,13 @@ rme-eg200) ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore" ;; rocket-m-ti) - ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:green:link3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link4" "wlan0" "76" "100" "-75" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link5" "wlan0" "76" "100" "-75" "13" - ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "ubnt:green:link4" "wlan0" "76" "100" "-75" "13" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" + ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "18" "100" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:green:link3" "wlan0" "34" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link4" "wlan0" "51" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link5" "wlan0" "67" "100" + ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "ubnt:green:link6" "wlan0" "84" "100" ;; rut900) ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" -- cgit v1.2.3