From dc7efaefb53d4671893add07934839eb8d44934d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 20 Jul 2016 15:44:54 +0200 Subject: apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter --- target/linux/apm821xx/sata/config-default | 44 +++++++++++++++++++++++++++++++ target/linux/apm821xx/sata/target.mk | 13 +++++++++ 2 files changed, 57 insertions(+) create mode 100644 target/linux/apm821xx/sata/config-default create mode 100644 target/linux/apm821xx/sata/target.mk (limited to 'target/linux/apm821xx/sata') diff --git a/target/linux/apm821xx/sata/config-default b/target/linux/apm821xx/sata/config-default new file mode 100644 index 0000000000..8b286fe159 --- /dev/null +++ b/target/linux/apm821xx/sata/config-default @@ -0,0 +1,44 @@ +# CONFIG_IKAREM is not set +CONFIG_APOLLO3G=y +CONFIG_EXT4_FS=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=y +# CONFIG_SATA_DWC_OLD_DMA is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_ATA=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_SATA_PMP=y +CONFIG_GENERIC_PHY=y +CONFIG_SATA_DWC=y +# CONFIG_SATA_DWC_DEBUG is not set +CONFIG_EXT4_FS=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_74XX_MMIO=y +CONFIG_BLK_DEV_DM=y +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_MD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_MD=y +CONFIG_MD_AUTODETECT=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_MULTIPATH is not set +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +CONFIG_BLK_DEV_RAM_SIZE=50331648 +CONFIG_PPC_EARLY_DEBUG=y +CONFIG_PPC_EARLY_DEBUG_44x=y +# CONFIG_PPC_EARLY_DEBUG_MEMCONS is not set +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x4 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 diff --git a/target/linux/apm821xx/sata/target.mk b/target/linux/apm821xx/sata/target.mk new file mode 100644 index 0000000000..60efb508d4 --- /dev/null +++ b/target/linux/apm821xx/sata/target.mk @@ -0,0 +1,13 @@ +BOARDNAME := Devices which boot from SATA (NAS) +FEATURES += ext4 usb +DEFAULT_PACKAGES += badblocks block-mount e2fsprogs \ + kmod-dm kmod-md-mod partx-utils + +define Target/Description + Build firmware images for APM82181 boards that boot from SATA. + For NAS like the MyBook Live Series. +endef + +$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_EXT4FS),RequireCommand,Ignore),genext2fs, \ + Please install genext2fs. \ +)) -- cgit v1.2.3