From dc7efaefb53d4671893add07934839eb8d44934d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 20 Jul 2016 15:44:54 +0200 Subject: apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter --- target/linux/apm821xx/dts/apollo3g-duo.dts | 18 ++ target/linux/apm821xx/dts/apollo3g.dts | 34 ++ target/linux/apm821xx/dts/apollo3g.dtsi | 489 +++++++++++++++++++++++++++++ 3 files changed, 541 insertions(+) create mode 100644 target/linux/apm821xx/dts/apollo3g-duo.dts create mode 100644 target/linux/apm821xx/dts/apollo3g.dts create mode 100644 target/linux/apm821xx/dts/apollo3g.dtsi (limited to 'target/linux/apm821xx/dts') diff --git a/target/linux/apm821xx/dts/apollo3g-duo.dts b/target/linux/apm821xx/dts/apollo3g-duo.dts new file mode 100644 index 0000000000..874c469b2b --- /dev/null +++ b/target/linux/apm821xx/dts/apollo3g-duo.dts @@ -0,0 +1,18 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese + * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apollo3g.dtsi" + +/ { + model = "MyBook Live Duo"; +}; diff --git a/target/linux/apm821xx/dts/apollo3g.dts b/target/linux/apm821xx/dts/apollo3g.dts new file mode 100644 index 0000000000..1b9f8267e4 --- /dev/null +++ b/target/linux/apm821xx/dts/apollo3g.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2008 DENX Software Engineering, Stefan Roese + * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apollo3g.dtsi" + +/ { + model = "MyBook Live"; +}; + +&SATA0 { + status = "disabled"; +}; + +&USBOTG0 { + status = "disabled"; +}; + +&gpio0 { + enable-usb { + status = "disabled"; + }; + + enable-port0 { + status = "disabled"; + }; +}; diff --git a/target/linux/apm821xx/dts/apollo3g.dtsi b/target/linux/apm821xx/dts/apollo3g.dtsi new file mode 100644 index 0000000000..bd15a8e22a --- /dev/null +++ b/target/linux/apm821xx/dts/apollo3g.dtsi @@ -0,0 +1,489 @@ +/* + * Copyright 2008 DENX Software Engineering, Stefan Roese + * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + compatible = "amcc,apollo3g"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm82181"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + OCM1: ocm@400040000 { + compatible = "ibm,ocm"; + status = "okay"; + cell-index = <1>; + /* configured in U-Boot */ + reg = <4 0x00040000 0x8000>; /* 32K */ + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <0x00c 0x002>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff791d>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 + 0x030 0x008>; + cache-line-size = <32>; + cache-size = <262144>; + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + PKA: pka@114000 { + device_type = "pka"; + compatible = "ppc4xx-pka", "amcc,ppc4xx-pka"; + reg = <0 0x00114000 0x4000>; + interrupt-parent = <&UIC0>; + interrupts = <0x14 0x2>; + }; + + HWRNG: trng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + descriptor-memory = "ocm"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4 + /*TX0 COAL*/ 0x8 0x2 + /*TX1 COAL 0x9 0x2*/ + /*RX0 COAL*/ 0xc 0x2 + /*RX1 COAL 0xd 0x2*/ >; + }; + + AHBDMA: dma@bffd0800 { + compatible = "snps,dma-spear1340"; + reg = <4 0xbffd0800 0x400>; + interrupt-parent = <&UIC0>; + interrupts = <25 4>; + #dma-cells = <3>; + /* use autoconfiguration for the dma setup */ + }; + + SATA0: sata@bffd1000 { + compatible = "amcc,sata-460ex"; + reg = <4 0xbffd1000 0x800>; + interrupt-parent = <&UIC0>; + interrupts = <26 4>; + dmas = <&AHBDMA 0 0 1>; + dma-names = "sata-dma"; + }; + + SATA1: sata@bffd1800 { + compatible = "amcc,sata-460ex"; + reg = <4 0xbffd1800 0x800>; + interrupt-parent = <&UIC0>; + interrupts = <27 4>; + dmas = <&AHBDMA 1 0 2>; + dma-names = "sata-dma"; + }; + + + USBOTG0: usbotg@bff80000 { + compatible = "snps,dwc2"; + reg = <4 0xbff80000 0x10000>; + interrupt-parent = <&USBOTG0>; + interrupts = <0 1 2>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + dr_mode = "host"; + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x4 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + /* ranges property are supplied by U-Boot */ + ranges = <0x0 0x0 0xfff80000 0x00080000 + 0x1 0x0 0x00000000 0x00000000 + 0x2 0x0 0x00000000 0x00000000>; + + /* Define device tree for Apollo3g NAS NOR flash + * The NOR doesn't work when "enable-button" GPIO + * is asserted. + */ + nor_flash@0,0 { + compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom"; + bank-width = <1>; + reg = <0x00000000 0x00000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* Part of bootrom - Don't use it without a jump */ + label = "free"; + reg = <0x00000000 0x0001e000>; + }; + partition@1 { + label = "env"; + reg = <0x0001e000 0x00002000>; + }; + partition@2 { + label = "uboot"; + reg = <0x00020000 0x00050000>; + }; + + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + nand { + #address-cells = <1>; + #size-cells = <1>; + }; + }; + }; + + gpio0: gpio0@e0000000 { + compatible = "wd,mbl-gpio", "ti,74273"; + reg-names = "dat"; + reg = <0xe0000000 0x1>; + #gpio-cells = <2>; + gpio-controller; + + enable-phy { + /* toggle to reset EMAC PHY */ + gpio-hog; + line-name = "enable EMAC PHY"; + gpios = <0 1>; + output-low; + }; + + enable-button { + /* Defined in u-boot as: NOT_NOR + * "enables features other than NOR + * specifically, the buffer at CS2" + * (button). + * + * Note: This option is disabled as + * it prevents the system from being + * rebooted successfully. + */ + + gpio-hog; + line-name = "Enable Reset Button, disable NOR"; + gpios = <1 0>; + output-low; + }; + + enable-usb { + gpio-hog; + line-name = "Power USB Core"; + gpios = <2 1>; + output-low; + }; + + enable-port1 { + gpio-hog; + line-name = "Power Drive Port 1"; + gpios = <3 1>; + output-low; + }; + + enable-port0 { + gpio-hog; + line-name = "Power Drive Port 0"; + gpios = <7 1>; + output-low; + }; + }; + + gpio1: gpio1@e0100000 { + compatible = "wd,mbl-gpio", "ti,74244"; + reg-names = "dat"; + reg = <0xe0100000 0x1>; + #gpio-cells = <2>; + gpio-controller; + no-output; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power-red { + label = "mbl:red:power"; + gpios = <&gpio0 4 0>; + linux,default-trigger = "panic"; + }; + power-green { + label = "mbl:green:power"; + gpios = <&gpio0 5 0>; + linux,default-trigger = "default-on"; + }; + power-blue { + label = "mbl:blue:power"; + gpios = <&gpio0 6 0>; + linux,default-trigger = "cpu0"; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <60>; /* 3 * 20 = 60ms */ + autorepeat; + button@1 { + label = "Reset button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio1 2 1>; + }; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + EMAC0: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + ADMA: adma { + compatible = "amcc,apm82181-adma"; + device_type = "dma"; + #address-cells = <2>; + #size-cells = <1>; + + dma-4channel@1 { + compatible = "amcc,apm82181-dma-4channel"; + cell-index = <1>; + label = "plb_dma1"; + interrupt-parent = <&UIC0>; + interrupts = <0xd 0x4>; + pool_size = <0x4000>; + dcr-reg = <0x208 0x20f>; + }; + + dma-4channel@2 { + compatible = "amcc,apm82181-dma-4channel"; + cell-index = <2>; + label = "plb_dma2"; + interrupt-parent = <&UIC0>; + interrupts = <0xe 0x4>; + pool_size = <0x4000>; + dcr-reg = <0x210 0x217>; + }; + + dma-4channel@3 { + compatible = "amcc,apm82181-dma-4channel"; + cell-index = <3>; + label = "plb_dma3"; + interrupt-parent = <&UIC0>; + interrupts = <0xf 0x4>; + pool_size = <0x4000>; + dcr-reg = <0x218 0x21f>; + }; + }; + + DMA: plb_dma@400300200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "amcc,dma"; + cell-index = <0>; + reg = <4 00300200 200>; + dcr-reg = <0x100 0x13f>; + interrupt-parent = <&UIC0>; + interrupts = <0>; + interrupt-map = < /* chan0 */ 0 &UIC0 12 4>; + + dma-4channel@0{ + compatible = "amcc,dma-4channel"; + cell-index = <0>; + label = "channel0"; + reg = <0x100 0x107>; + }; + }; + }; +}; -- cgit v1.2.3