From c91df224f54fdd44c9c0487a8c91876f5d273164 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= Date: Thu, 14 Apr 2022 12:39:03 +0200 Subject: ath79: add support for Yuncore XD3200 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE --- package/boot/uboot-envtools/files/ath79 | 1 + 1 file changed, 1 insertion(+) (limited to 'package') diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 230f2fe417..ace5cab30f 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -69,6 +69,7 @@ samsung,wam250|\ ubnt,nanostation-m|\ yuncore,a770|\ yuncore,a782|\ +yuncore,xd3200|\ yuncore,xd4200|\ ziking,cpe46b|\ zyxel,nbg6616) -- cgit v1.2.3