From 0c721434ea56044cdc1c13554c970b82471bc43e Mon Sep 17 00:00:00 2001 From: Tee Hao Wei Date: Tue, 6 Jul 2021 01:19:08 +0800 Subject: ramips: add support for Linksys EA8100 v2 Specifications: - SoC: MT7621AT - RAM: 256MB - Flash: 128MB NAND - Ethernet: 5 Gigabit ports - WiFi: 2.4G/5G MT7615N - USB: 1 USB 3.0, 1 USB 2.0 This device is very similar to the EA7300 v1/v2, EA7500 v2, and EA8100 v1. Installation: Upload the generated factory image through the factory web interface. (following part taken from EA7300 v2 commit message:) This might fail due to the A/B nature of this device. When flashing, OEM firmware writes over the non-booted partition. If booted from 'A', flashing over 'B' won't work. To get around this, you should flash the OEM image over itself. This will then boot the router from 'B' and allow you to flash OpenWRT without problems. Reverting to factory firmware: Hard-reset the router three times to force it to boot from 'B.' This is where the stock firmware resides. To remove any traces of OpenWRT from your router simply flash the OEM image at this point. With thanks to Tom Wizetek (@wizetek) for testing. Signed-off-by: Tee Hao Wei --- package/boot/uboot-envtools/files/ramips | 1 + 1 file changed, 1 insertion(+) (limited to 'package') diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 2bb04997f9..7941c106e4 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -54,6 +54,7 @@ linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2|\ linksys,ea8100-v1|\ +linksys,ea8100-v2|\ xiaomi,mi-router-3g|\ xiaomi,mi-router-3-pro|\ xiaomi,mi-router-4|\ -- cgit v1.2.3