From 06222ce73eb040f1162ea949c1385816d993b72b Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 11 Jun 2019 14:53:12 +0200 Subject: mac80211: ath10k: adjust tx power reduction for US regulatory domain FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4): > (4) The conducted output power limit > specified in paragraph (b) of this section > is based on the use of antennas > with directional gains that do not exceed > 6 dBi. Except as shown in paragraph > (c) of this section, if transmitting > antennas of directional gain greater > than 6 dBi are used, the conducted > output power from the intentional radiator > shall be reduced below the stated > values in paragraphs (b)(1), (b)(2), > and (b)(3) of this section, as appropriate, > by the amount in dB that the > directional gain of the antenna exceeds > 6 dBi. https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf Signed-off-by: Sven Eckelmann --- ...st-tx-power-reduction-for-US-regulatory-d.patch | 101 +++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch (limited to 'package') diff --git a/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch b/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch new file mode 100644 index 0000000000..07247a0577 --- /dev/null +++ b/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch @@ -0,0 +1,101 @@ +From: Sven Eckelmann +Date: Wed, 28 Nov 2018 16:16:27 +0100 +Subject: ath10k: adjust tx power reduction for US regulatory domain + +FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4): + +> (4) The conducted output power limit +> specified in paragraph (b) of this section +> is based on the use of antennas +> with directional gains that do not exceed +> 6 dBi. Except as shown in paragraph +> (c) of this section, if transmitting +> antennas of directional gain greater +> than 6 dBi are used, the conducted +> output power from the intentional radiator +> shall be reduced below the stated +> values in paragraphs (b)(1), (b)(2), +> and (b)(3) of this section, as appropriate, +> by the amount in dB that the +> directional gain of the antenna exceeds +> 6 dBi. + +https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf + +Signed-off-by: Sven Eckelmann + +Forwarded: no + +--- a/drivers/net/wireless/ath/ath10k/mac.c ++++ b/drivers/net/wireless/ath/ath10k/mac.c +@@ -988,6 +988,40 @@ static inline int ath10k_vdev_setup_sync + return 0; + } + ++static u32 ath10k_get_max_antenna_gain(struct ath10k *ar, ++ u32 ch_max_antenna_gain) ++{ ++ u32 max_antenna_gain; ++ ++ if (ar->dfs_detector && ar->dfs_detector->region == NL80211_DFS_FCC) { ++ /* FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4): ++ * ++ * > (4) The conducted output power limit ++ * > specified in paragraph (b) of this section ++ * > is based on the use of antennas ++ * > with directional gains that do not exceed ++ * > 6 dBi. Except as shown in paragraph ++ * > (c) of this section, if transmitting ++ * > antennas of directional gain greater ++ * > than 6 dBi are used, the conducted ++ * > output power from the intentional radiator ++ * > shall be reduced below the stated ++ * > values in paragraphs (b)(1), (b)(2), ++ * > and (b)(3) of this section, as appropriate, ++ * > by the amount in dB that the ++ * > directional gain of the antenna exceeds ++ * > 6 dBi. ++ * ++ * https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf ++ */ ++ max_antenna_gain = 6; ++ } else { ++ max_antenna_gain = 0; ++ } ++ ++ return max(ch_max_antenna_gain, max_antenna_gain); ++} ++ + static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) + { + struct cfg80211_chan_def *chandef = NULL; +@@ -1020,7 +1054,8 @@ static int ath10k_monitor_vdev_start(str + arg.channel.min_power = 0; + arg.channel.max_power = channel->max_power * 2; + arg.channel.max_reg_power = channel->max_reg_power * 2; +- arg.channel.max_antenna_gain = channel->max_antenna_gain; ++ arg.channel.max_antenna_gain = ath10k_get_max_antenna_gain(ar, ++ channel->max_antenna_gain); + + reinit_completion(&ar->vdev_setup_done); + +@@ -1462,7 +1497,8 @@ static int ath10k_vdev_start_restart(str + arg.channel.min_power = 0; + arg.channel.max_power = chandef->chan->max_power * 2; + arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; +- arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain; ++ arg.channel.max_antenna_gain = ath10k_get_max_antenna_gain(ar, ++ chandef->chan->max_antenna_gain); + + if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { + arg.ssid = arvif->u.ap.ssid; +@@ -3139,7 +3175,8 @@ static int ath10k_update_channel_list(st + ch->min_power = 0; + ch->max_power = channel->max_power * 2; + ch->max_reg_power = channel->max_reg_power * 2; +- ch->max_antenna_gain = channel->max_antenna_gain; ++ ch->max_antenna_gain = ath10k_get_max_antenna_gain(ar, ++ channel->max_antenna_gain); + ch->reg_class_id = 0; /* FIXME */ + + /* FIXME: why use only legacy modes, why not any -- cgit v1.2.3