From aa323e0134c4dd374869446738b701f82d014c89 Mon Sep 17 00:00:00 2001 From: Ralph Hempel Date: Tue, 30 Mar 2010 13:51:10 +0000 Subject: missing patch & config file SVN-Revision: 20604 --- package/uboot-lantiq/Config.in | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 package/uboot-lantiq/Config.in (limited to 'package/uboot-lantiq/Config.in') diff --git a/package/uboot-lantiq/Config.in b/package/uboot-lantiq/Config.in new file mode 100644 index 0000000000..7544e711df --- /dev/null +++ b/package/uboot-lantiq/Config.in @@ -0,0 +1,32 @@ +config UBOOT_CONFIG + string "configuration file" + default "easy50712_DDR166M" + help + The configuration reflects the settings for a dedicated board hardware. + Select for Danube evaluation board easy50712_DDR166M . + Select for AR9 evaluation board easy50812_DDR166M . + +config UBOOT_DDR_CONFIG + string "DDR configuration file" + default "danube_ref_ddr166.conf" + depends on UBOOT_RAMBOOT + help + The DDR configuration file should reflect the DDR memory device configuration . + It will be used to create a RAM boot image + Select for Danube evalution board danube_ref_ddr166.conf . + Select for AR9 evalution board easy50812.conf . + +config UBOOT_RAMBOOT + bool "Enable RAM boot image" + help + Using the UART boot mode of the ROM code this image could be loaded to the RAM. + Executing the image in the RAM the functionality of the uboot image can be + tested first without touching the original flash. + Note: Be carefull, by saving the environment the flash will be modified. + The OWRT flash layout differs from the layout provided by Lantiq / Infineon. + +config IFXMIPS_UBOOT_A800 + bool "add ARV452 Switch bringup hack" + depends on PACKAGE_uboot-ifxmips + help + Say Y, if you have a arv452 board (wav-281, A800, ..) -- cgit v1.2.3