From 8db0fcf1f717357f18bbe7273762835f60dddd70 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 22 Jun 2014 11:42:28 +0000 Subject: iw: update to 3.15 Signed-off-by: Felix Fietkau SVN-Revision: 41299 --- .../utils/iw/patches/001-nl80211_h_sync.patch | 232 ++++----------------- 1 file changed, 36 insertions(+), 196 deletions(-) (limited to 'package/network/utils/iw/patches/001-nl80211_h_sync.patch') diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 3a263686a9..4f780fb39d 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,39 +1,6 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -303,8 +303,9 @@ - * passed, all channels allowed for the current regulatory domain - * are used. Extra IEs can also be passed from the userspace by - * using the %NL80211_ATTR_IE attribute. -- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT -- * if scheduled scan is not running. -+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if -+ * scheduled scan is not running. The caller may assume that as soon -+ * as the call returns, it is safe to start a new scheduled scan again. - * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan - * results available. - * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has -@@ -418,8 +419,18 @@ - * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, - * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, -- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and -- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. -+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, -+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and -+ * %NL80211_ATTR_WIPHY_FREQ_HINT. -+ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are -+ * restrictions on BSS selection, i.e., they effectively prevent roaming -+ * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT -+ * can be included to provide a recommendation of the initial BSS while -+ * allowing the driver to roam to other BSSes within the ESS and also to -+ * ignore this recommendation if the indicated BSS is not ideal. Only one -+ * set of BSSID,frequency parameters is used (i.e., either the enforcing -+ * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict -+ * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). - * Background scan period can optionally be - * specified in %NL80211_ATTR_BG_SCAN_PERIOD, - * if not specified default background scan configuration -@@ -492,6 +503,9 @@ +@@ -503,6 +503,9 @@ * TX status event pertaining to the TX request. * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the * management frames at CCK rate or not in 2GHz band. @@ -43,7 +10,7 @@ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. -@@ -1514,10 +1528,10 @@ enum nl80211_commands { +@@ -1525,10 +1528,10 @@ enum nl80211_commands { * operation). * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. @@ -58,28 +25,18 @@ * * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. * As specified in the &enum nl80211_rxmgmt_flags. -@@ -1555,6 +1569,31 @@ enum nl80211_commands { - * data is in the format defined for the payload of the QoS Map Set element - * in IEEE Std 802.11-2012, 8.4.2.97. +@@ -1576,9 +1579,21 @@ enum nl80211_commands { + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. * -+ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS -+ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS -+ * -+ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many -+ * associated stations are supported in AP mode (including P2P GO); u32. -+ * Since drivers may not have a fixed limit on the maximum number (e.g., -+ * other concurrent operations may affect this), drivers are allowed to -+ * advertise values that cannot always be met. In such cases, an attempt -+ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. -+ * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * -+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. -+ * As specified in the &enum nl80211_tdls_peer_capability. -+ * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * + * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed @@ -90,17 +47,10 @@ * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ -@@ -1883,6 +1922,20 @@ enum nl80211_attrs { +@@ -1914,6 +1929,13 @@ enum nl80211_attrs { - NL80211_ATTR_QOS_MAP, + NL80211_ATTR_TDLS_PEER_CAPABILITY, -+ NL80211_ATTR_MAC_HINT, -+ NL80211_ATTR_WIPHY_FREQ_HINT, -+ -+ NL80211_ATTR_MAX_AP_ASSOC_STA, -+ -+ NL80211_ATTR_TDLS_PEER_CAPABILITY, -+ + NL80211_ATTR_IFACE_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, @@ -111,11 +61,27 @@ /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -2304,9 +2357,35 @@ enum nl80211_band_attr { - * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel +@@ -2182,6 +2204,8 @@ enum nl80211_sta_bss_param { + * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. ++ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the ++ * 802.11 header (u32, kbps) + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +@@ -2213,6 +2237,7 @@ enum nl80211_sta_info { + NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, ++ NL80211_STA_INFO_EXPECTED_THROUGHPUT, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, +@@ -2336,9 +2361,34 @@ enum nl80211_band_attr { * using this channel as the primary or any of the secondary channels * isn't possible -+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in @@ -147,11 +113,10 @@ */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, -@@ -2322,6 +2401,11 @@ enum nl80211_frequency_attr { - NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, +@@ -2355,6 +2405,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, -+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, @@ -159,68 +124,7 @@ /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, -@@ -2412,12 +2496,14 @@ enum nl80211_reg_type { - * in KHz. This is not a center a frequency but an actual regulatory - * band edge. - * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this -- * frequency range, in KHz. -+ * frequency range, in KHz. - * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain - * for a given frequency range. The value is in mBi (100 * dBi). - * If you don't have one then don't send this. - * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for - * a given frequency range. The value is in mBm (100 * dBm). -+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. -+ * If not present or 0 default CAC time will be used. - * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number - * currently defined - * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use -@@ -2433,6 +2519,8 @@ enum nl80211_reg_rule_attr { - NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, - NL80211_ATTR_POWER_RULE_MAX_EIRP, - -+ NL80211_ATTR_DFS_CAC_TIME, -+ - /* keep last */ - __NL80211_REG_RULE_ATTR_AFTER_LAST, - NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 -@@ -2442,9 +2530,15 @@ enum nl80211_reg_rule_attr { - * enum nl80211_sched_scan_match_attr - scheduled scan match attributes - * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, -- * only report BSS with matching SSID. -+ * only report BSS with matching SSID. - * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a -- * BSS in scan results. Filtering is turned off if not specified. -+ * BSS in scan results. Filtering is turned off if not specified. Note that -+ * if this attribute is in a match set of its own, then it is treated as -+ * the default value for all matchsets with an SSID, rather than being a -+ * matchset of its own without an RSSI filter. This is due to problems with -+ * how this API was implemented in the past. Also, due to the same problem, -+ * the only way to create a matchset with only an RSSI filter (with this -+ * attribute) is if there's only a single matchset with the RSSI attribute. - * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter - * attribute number currently defined - * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use -@@ -2477,6 +2571,9 @@ enum nl80211_sched_scan_match_attr { - * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, - * this includes probe requests or modes of operation that require - * beaconing. -+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated -+ * base on contiguous rules and wider channels will be allowed to cross -+ * multiple contiguous/overlapping frequency ranges. - */ - enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, -@@ -2488,6 +2585,7 @@ enum nl80211_reg_rule_flags { - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, -+ NL80211_RRF_AUTO_BW = 1<<11, - }; - - #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -@@ -2526,10 +2624,13 @@ enum nl80211_dfs_regions { +@@ -2573,10 +2627,13 @@ enum nl80211_dfs_regions { * present has been registered with the wireless core that * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a * supported feature. @@ -234,36 +138,7 @@ }; /** -@@ -3131,6 +3232,7 @@ enum nl80211_key_attributes { - * in an array of MCS numbers. - * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, - * see &struct nl80211_txrate_vht -+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi - * @__NL80211_TXRATE_AFTER_LAST: internal - * @NL80211_TXRATE_MAX: highest TX rate attribute - */ -@@ -3139,6 +3241,7 @@ enum nl80211_tx_rate_attributes { - NL80211_TXRATE_LEGACY, - NL80211_TXRATE_HT, - NL80211_TXRATE_VHT, -+ NL80211_TXRATE_GI, - - /* keep last */ - __NL80211_TXRATE_AFTER_LAST, -@@ -3156,6 +3259,12 @@ struct nl80211_txrate_vht { - __u16 mcs[NL80211_VHT_NSS_MAX]; - }; - -+enum nl80211_txrate_gi { -+ NL80211_TXRATE_DEFAULT_GI, -+ NL80211_TXRATE_FORCE_SGI, -+ NL80211_TXRATE_FORCE_LGI, -+}; -+ - /** - * enum nl80211_band - Frequency band - * @NL80211_BAND_2GHZ: 2.4 GHz ISM band -@@ -3595,6 +3704,8 @@ enum nl80211_iface_limit_attrs { +@@ -3650,6 +3707,8 @@ enum nl80211_iface_limit_attrs { * different channels may be used within this group. * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap * of supported channel widths for radar detection. @@ -272,7 +147,7 @@ * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * -@@ -3628,6 +3739,7 @@ enum nl80211_if_combination_attrs { +@@ -3683,6 +3742,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, @@ -280,21 +155,7 @@ /* keep last */ NUM_NL80211_IFACE_COMB, -@@ -3801,11 +3913,8 @@ enum nl80211_ap_sme_features { - * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from - * cellular base stations. -- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active -- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel -- * in the interface combinations, even when it's only used for scan -- * and remain-on-channel. This could be due to, for example, the -- * remain-on-channel implementation requiring a channel context. -+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only -+ * here to reserve the value for API/ABI compatibility) - * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of - * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station - * mode -@@ -3841,6 +3950,9 @@ enum nl80211_ap_sme_features { +@@ -3893,6 +3953,9 @@ enum nl80211_ap_sme_features { * interface. An active monitor interface behaves like a normal monitor * interface, but gets added to the driver. It ensures that incoming * unicast packets directed at the configured interface address get ACKed. @@ -304,7 +165,7 @@ */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, -@@ -3861,6 +3973,7 @@ enum nl80211_feature_flags { +@@ -3913,6 +3976,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, @@ -312,24 +173,3 @@ }; /** -@@ -4037,4 +4150,20 @@ struct nl80211_vendor_cmd_info { - __u32 subcmd; - }; - -+/** -+ * enum nl80211_tdls_peer_capability - TDLS peer flags. -+ * -+ * Used by tdls_mgmt() to determine which conditional elements need -+ * to be added to TDLS Setup frames. -+ * -+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. -+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. -+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. -+ */ -+enum nl80211_tdls_peer_capability { -+ NL80211_TDLS_PEER_HT = 1<<0, -+ NL80211_TDLS_PEER_VHT = 1<<1, -+ NL80211_TDLS_PEER_WMM = 1<<2, -+}; -+ - #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3