From 338276cab2da6df653d5506bc3f89732e35f727e Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sat, 29 Jan 2011 02:14:22 +0000
Subject: [package] br2684ctl from linux-atm

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25225 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 package/linux-atm/Makefile        | 24 ++++++++++++++--
 package/linux-atm/files/br2684ctl | 60 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 82 insertions(+), 2 deletions(-)
 create mode 100755 package/linux-atm/files/br2684ctl

(limited to 'package/linux-atm')

diff --git a/package/linux-atm/Makefile b/package/linux-atm/Makefile
index 39db05ef9f..8a759df566 100644
--- a/package/linux-atm/Makefile
+++ b/package/linux-atm/Makefile
@@ -1,4 +1,4 @@
-# 
+#
 # Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=linux-atm
 PKG_VERSION:=2.5.2
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@SF/$(PKG_NAME)
@@ -43,6 +43,18 @@ define Package/atm-tools/description
   This package contains the Linux ATM tools.
 endef
 
+define Package/br2684ctl
+  SECTION:=net
+  CATEGORY:=Network
+  DEPENDS:=linux-atm
+  TITLE:=ATM Ethernet bridging configuration utility
+  URL:=http://linux-atm.sourceforge.net/
+endef
+
+define Package/br2684ctl/description
+  Support for AAL5 encapsulation (RFC-1483/RFC-2684) over ATM.
+endef
+
 define Build/Configure
 	$(call Build/Configure/Default)
 	# prevent autoheader invocation
@@ -109,5 +121,13 @@ define Package/atm-tools/install
 #	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/ttcp_atm $(1)/usr/bin/
 endef
 
+define Package/br2684ctl/install
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_BIN) ./files/br2684ctl $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/br2684ctl $(1)/usr/sbin/
+endef
+
 $(eval $(call BuildPackage,linux-atm))
 $(eval $(call BuildPackage,atm-tools))
+$(eval $(call BuildPackage,br2684ctl))
diff --git a/package/linux-atm/files/br2684ctl b/package/linux-atm/files/br2684ctl
new file mode 100755
index 0000000000..929e2b887e
--- /dev/null
+++ b/package/linux-atm/files/br2684ctl
@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+START=50
+
+start_daemon() {
+	local cfg="$1"
+
+	local atmdev
+	config_get atmdev "$cfg" atmdev 0
+
+	local unit
+	config_get unit "$cfg" unit 0
+
+	local vpi
+	config_get vpi "$cfg" vpi 8
+
+	local vci
+	config_get vci "$cfg" vci 35
+
+	local encaps
+	config_get encaps "$cfg" encaps
+
+	case "$encaps" in
+		1|vc) encaps=1;;
+		*) encaps=0;;
+	esac
+
+	local payload
+	config_get payload "$cfg" payload
+
+	case "$payload" in
+		0|routed) payload=0;;
+		*) payload=1;;
+	esac
+
+	local qos
+	config_get qos "$cfg" qos
+
+	local circuit="$atmdev.$vpi.$vci"
+	local pid="/var/run/br2684ctl-$circuit.pid"
+
+	start-stop-daemon -S -b -x /usr/sbin/br2684ctl -m -p "$pid" -- \
+		-c "$unit" -e "$encaps" -p "$payload" \
+		-a "$circuit" ${qos:+-q "$qos"}
+}
+
+start() {
+	insmod br2684 >/dev/null 2>/dev/null
+	config_load network
+	config_foreach start_daemon atm-bridge
+}
+
+stop() {
+	local pid
+	for pid in /var/run/br2684ctl-*.pid; do
+		if [ -f "$pid" ]; then
+			service_kill br2684ctl "$pid"
+			rm -f "$pid"
+		fi
+	done
+}
-- 
cgit v1.2.3