From 976d1a10243874c67f3cd7f5987c3a9a4136d9e7 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 1 Nov 2009 18:52:35 +0000 Subject: adds dsl support, thank you infineon/lantiq SVN-Revision: 18259 --- package/ifxmips-atm/src/ppe.c | 838 ------------------------------------------ 1 file changed, 838 deletions(-) delete mode 100644 package/ifxmips-atm/src/ppe.c (limited to 'package/ifxmips-atm/src/ppe.c') diff --git a/package/ifxmips-atm/src/ppe.c b/package/ifxmips-atm/src/ppe.c deleted file mode 100644 index 65e4be9c65..0000000000 --- a/package/ifxmips-atm/src/ppe.c +++ /dev/null @@ -1,838 +0,0 @@ -#include -#include "common.h" - -#include "ifx_ppe_fw.h" -static void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, unsigned int connection) -{ - - u32 qsb_clk = cgu_get_fpi_bus_clock(2); /* FPI configuration 2 (slow FPI bus) */ - union qsb_queue_parameter_table qsb_queue_parameter_table = {{0}}; - union qsb_queue_vbr_parameter_table qsb_queue_vbr_parameter_table = {{0}}; - u32 tmp; - - /* - * Peak Cell Rate (PCR) Limiter - */ - if ( qos->txtp.max_pcr == 0 ) - qsb_queue_parameter_table.bit.tp = 0; /* disable PCR limiter */ - else - { - /* peak cell rate would be slightly lower than requested [maximum_rate / pcr = (qsb_clock / 8) * (time_step / 4) / pcr] */ - tmp = ((qsb_clk * ppe_dev.qsb.tstepc) >> 5) / qos->txtp.max_pcr + 1; - /* check if overflow takes place */ - qsb_queue_parameter_table.bit.tp = tmp > QSB_TP_TS_MAX ? QSB_TP_TS_MAX : tmp; - } - /* - * Weighted Fair Queueing Factor (WFQF) - */ - switch ( qos->txtp.traffic_class ) - { - case ATM_CBR: - case ATM_VBR_RT: - /* real time queue gets weighted fair queueing bypass */ - qsb_queue_parameter_table.bit.wfqf = 0; - break; - case ATM_VBR_NRT: - case ATM_UBR_PLUS: - /* WFQF calculation here is based on virtual cell rates, to reduce granularity for high rates */ - /* WFQF is maximum cell rate / garenteed cell rate */ - /* wfqf = qsb_minimum_cell_rate * QSB_WFQ_NONUBR_MAX / requested_minimum_peak_cell_rate */ - if ( qos->txtp.min_pcr == 0 ) - qsb_queue_parameter_table.bit.wfqf = QSB_WFQ_NONUBR_MAX; - else - { - tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; - if ( tmp == 0 ) - qsb_queue_parameter_table.bit.wfqf = 1; - else if ( tmp > QSB_WFQ_NONUBR_MAX ) - qsb_queue_parameter_table.bit.wfqf = QSB_WFQ_NONUBR_MAX; - else - qsb_queue_parameter_table.bit.wfqf = tmp; - } - break; - default: - case ATM_UBR: - qsb_queue_parameter_table.bit.wfqf = QSB_WFQ_UBR_BYPASS; - } - /* - * Sustained Cell Rate (SCR) Leaky Bucket Shaper VBR.0/VBR.1 - */ - if ( qos->txtp.traffic_class == ATM_VBR_RT || qos->txtp.traffic_class == ATM_VBR_NRT ) - { - if ( qos->txtp.scr == 0 ) - { - /* disable shaper */ - qsb_queue_vbr_parameter_table.bit.taus = 0; - qsb_queue_vbr_parameter_table.bit.ts = 0; - } - else - { - /* Cell Loss Priority (CLP) */ - if ( (vcc->atm_options & ATM_ATMOPT_CLP) ) - /* CLP1 */ - qsb_queue_parameter_table.bit.vbr = 1; - else - /* CLP0 */ - qsb_queue_parameter_table.bit.vbr = 0; - /* Rate Shaper Parameter (TS) and Burst Tolerance Parameter for SCR (tauS) */ - tmp = ((qsb_clk * ppe_dev.qsb.tstepc) >> 5) / qos->txtp.scr + 1; - qsb_queue_vbr_parameter_table.bit.ts = tmp > QSB_TP_TS_MAX ? QSB_TP_TS_MAX : tmp; - tmp = (qos->txtp.mbs - 1) * (qsb_queue_vbr_parameter_table.bit.ts - qsb_queue_parameter_table.bit.tp) / 64; - if ( tmp == 0 ) - qsb_queue_vbr_parameter_table.bit.taus = 1; - else if ( tmp > QSB_TAUS_MAX ) - qsb_queue_vbr_parameter_table.bit.taus = QSB_TAUS_MAX; - else - qsb_queue_vbr_parameter_table.bit.taus = tmp; - } - } - else - { - qsb_queue_vbr_parameter_table.bit.taus = 0; - qsb_queue_vbr_parameter_table.bit.ts = 0; - } - - /* Queue Parameter Table (QPT) */ - *QSB_RTM = QSB_RTM_DM_SET(QSB_QPT_SET_MASK); - *QSB_RTD = QSB_RTD_TTV_SET(qsb_queue_parameter_table.dword); - *QSB_RAMAC = QSB_RAMAC_RW_SET(QSB_RAMAC_RW_WRITE) | QSB_RAMAC_TSEL_SET(QSB_RAMAC_TSEL_QPT) | QSB_RAMAC_LH_SET(QSB_RAMAC_LH_LOW) | QSB_RAMAC_TESEL_SET(connection); - /* Queue VBR Paramter Table (QVPT) */ - *QSB_RTM = QSB_RTM_DM_SET(QSB_QVPT_SET_MASK); - *QSB_RTD = QSB_RTD_TTV_SET(qsb_queue_vbr_parameter_table.dword); - *QSB_RAMAC = QSB_RAMAC_RW_SET(QSB_RAMAC_RW_WRITE) | QSB_RAMAC_TSEL_SET(QSB_RAMAC_TSEL_VBR) | QSB_RAMAC_LH_SET(QSB_RAMAC_LH_LOW) | QSB_RAMAC_TESEL_SET(connection); - -} - - -static inline void u64_add_u32(ppe_u64_t opt1, u32 opt2,ppe_u64_t *ret) -{ - ret->l = opt1.l + opt2; - if ( ret->l < opt1.l || ret->l < opt2 ) - ret->h++; -} - -int find_vcc(struct atm_vcc *vcc) -{ - int i; - struct connection *connection = ppe_dev.connection; - int max_connections = ppe_dev.port[(int)vcc->dev->dev_data].max_connections; - u32 occupation_table = ppe_dev.port[(int)vcc->dev->dev_data].connection_table; - int base = ppe_dev.port[(int)vcc->dev->dev_data].connection_base; - for ( i = 0; i < max_connections; i++, base++ ) - if ( (occupation_table & (1 << i)) - && connection[base].vcc == vcc ) - return base; - return -1; -} - -int find_vpi(unsigned int vpi) -{ - int i, j; - struct connection *connection = ppe_dev.connection; - struct port *port; - int base; - - port = ppe_dev.port; - for ( i = 0; i < ATM_PORT_NUMBER; i++, port++ ) - { - base = port->connection_base; - for ( j = 0; j < port->max_connections; j++, base++ ) - if ( (port->connection_table & (1 << j)) - && connection[base].vcc != NULL - && vpi == connection[base].vcc->vpi ) - return base; - } - return -1; -} - -int find_vpivci(unsigned int vpi, unsigned int vci) -{ - int i, j; - struct connection *connection = ppe_dev.connection; - struct port *port; - int base; - - port = ppe_dev.port; - for ( i = 0; i < ATM_PORT_NUMBER; i++, port++ ) - { - base = port->connection_base; - for ( j = 0; j < port->max_connections; j++, base++ ) - if ( (port->connection_table & (1 << j)) - && connection[base].vcc != NULL - && vpi == connection[base].vcc->vpi - && vci == connection[base].vcc->vci ) - return base; - } - return -1; -} - - -static inline void clear_htu_entry(unsigned int connection) -{ - HTU_ENTRY(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER)->vld = 0; -} - -static inline void set_htu_entry(unsigned int vpi, unsigned int vci, unsigned int connection, int aal5) -{ - struct htu_entry htu_entry = { res1: 0x00, - pid: ppe_dev.connection[connection].port & 0x01, - vpi: vpi, - vci: vci, - pti: 0x00, - vld: 0x01}; - - struct htu_mask htu_mask = { set: 0x03, - pid_mask: 0x02, - vpi_mask: 0x00, - vci_mask: 0x0000, - pti_mask: 0x03, // 0xx, user data - clear: 0x00}; - - struct htu_result htu_result = {res1: 0x00, - cellid: connection, - res2: 0x00, - type: aal5 ? 0x00 : 0x01, - ven: 0x01, - res3: 0x00, - qid: connection}; - - *HTU_RESULT(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER) = htu_result; - *HTU_MASK(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER) = htu_mask; - *HTU_ENTRY(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER) = htu_entry; -} - -int alloc_tx_connection(int connection) -{ - unsigned long sys_flag; - int desc_base; - - if ( ppe_dev.dma.tx_desc_alloc_pos[connection] == ppe_dev.dma.tx_desc_release_pos[connection] && ppe_dev.dma.tx_desc_alloc_flag[connection] ) - return -1; - - /* amend descriptor pointer and allocation number */ - local_irq_save(sys_flag); - desc_base = ppe_dev.dma.tx_descriptor_number * (connection - QSB_QUEUE_NUMBER_BASE) + ppe_dev.dma.tx_desc_alloc_pos[connection]; - if ( ++ppe_dev.dma.tx_desc_alloc_pos[connection] == ppe_dev.dma.tx_descriptor_number ) - ppe_dev.dma.tx_desc_alloc_pos[connection] = 0; - ppe_dev.dma.tx_desc_alloc_flag[connection] = 1; - local_irq_restore(sys_flag); - - return desc_base; -} - - -int ppe_open(struct atm_vcc *vcc) -{ - int ret; - struct port *port = &ppe_dev.port[(int)vcc->dev->dev_data]; - int conn; - int f_enable_irq = 0; - int i; -printk("%s:%s[%d] removed 2 args from signature\n", __FILE__, __func__, __LINE__); - -printk("ppe_open"); - - if ( vcc->qos.aal != ATM_AAL5 && vcc->qos.aal != ATM_AAL0 ) - return -EPROTONOSUPPORT; - - down(&ppe_dev.sem); - - /* check bandwidth */ - if ( (vcc->qos.txtp.traffic_class == ATM_CBR && vcc->qos.txtp.max_pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) - || (vcc->qos.txtp.traffic_class == ATM_VBR_RT && vcc->qos.txtp.max_pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) - || (vcc->qos.txtp.traffic_class == ATM_VBR_NRT && vcc->qos.txtp.pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) - || (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS && vcc->qos.txtp.min_pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) ) - { - ret = -EINVAL; - goto PPE_OPEN_EXIT; - } - - printk("alloc vpi = %d, vci = %d\n", vcc->vpi, vcc->vci); - - /* check existing vpi,vci */ - conn = find_vpivci(vcc->vpi, vcc->vci); - if ( conn >= 0 ) - { - ret = -EADDRINUSE; - goto PPE_OPEN_EXIT; - } - - /* check whether it need to enable irq */ - for ( i = 0; i < ATM_PORT_NUMBER; i++ ) - if ( ppe_dev.port[i].max_connections != 0 && ppe_dev.port[i].connection_table != 0 ) - break; - if ( i == ATM_PORT_NUMBER ) - f_enable_irq = 1; - - /* allocate connection */ - for ( i = 0, conn = port->connection_base; i < port->max_connections; i++, conn++ ) - if ( !(port->connection_table & (1 << i)) ) - { - port->connection_table |= 1 << i; - ppe_dev.connection[conn].vcc = vcc; - break; - } - if ( i == port->max_connections ) - { - ret = -EINVAL; - goto PPE_OPEN_EXIT; - } - -#if defined(ENABLE_RX_QOS) && ENABLE_RX_QOS - /* assign DMA channel and setup weight value for RX QoS */ - switch ( vcc->qos.rxtp.traffic_class ) - { - case ATM_CBR: - ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_CBR; - break; - case ATM_VBR_RT: - ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_VBR_RT; - ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT] += vcc->qos.rxtp.max_pcr; - ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_RT] += vcc->qos.rxtp.max_pcr; - break; - case ATM_VBR_NRT: - ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_VBR_NRT; - ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT] += vcc->qos.rxtp.pcr; - ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_NRT] += vcc->qos.rxtp.pcr; - break; - case ATM_ABR: - ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_AVR; - ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR] += vcc->qos.rxtp.min_pcr; - ppe_dev.dma.rx_weight[RX_DMA_CH_AVR] += vcc->qos.rxtp.min_pcr; - break; - case ATM_UBR_PLUS: - default: - ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_UBR; - break; - } - - /* update RX queue configuration table */ - WRX_QUEUE_CONFIG(conn)->dmach = ppe_dev.connection[conn].rx_dma_channel; - - printk("ppe_open: QID %d, DMA %d\n", conn, WRX_QUEUE_CONFIG(conn)->dmach); - - printk("conn = %d, dmach = %d", conn, WRX_QUEUE_CONFIG(conn)->dmach); -#endif // defined(ENABLE_RX_QOS) && ENABLE_RX_QOS - - /* reserve bandwidth */ - switch ( vcc->qos.txtp.traffic_class ) - { - case ATM_CBR: - case ATM_VBR_RT: - port->tx_current_cell_rate += vcc->qos.txtp.max_pcr; - break; - case ATM_VBR_NRT: - port->tx_current_cell_rate += vcc->qos.txtp.pcr; - break; - case ATM_UBR_PLUS: - port->tx_current_cell_rate += vcc->qos.txtp.min_pcr; - break; - } - - /* set qsb */ - set_qsb(vcc, &vcc->qos, conn); - - /* update atm_vcc structure */ - vcc->itf = (int)vcc->dev->dev_data; - - set_bit(ATM_VF_READY, &vcc->flags); - - /* enable irq */ - printk("ppe_open: enable_irq\n"); - if ( f_enable_irq ) - enable_irq(IFXMIPS_PPE_MBOX_INT); - - /* enable mailbox */ - *MBOX_IGU1_ISRC = (1 << conn) | (1 << (conn + 16)); - *MBOX_IGU1_IER |= (1 << conn) | (1 << (conn + 16)); - *MBOX_IGU3_ISRC = (1 << conn) | (1 << (conn + 16)); - *MBOX_IGU3_IER |= (1 << conn) | (1 << (conn + 16)); - - /* set htu entry */ - set_htu_entry(vcc->vpi, vcc->vci, conn, vcc->qos.aal == ATM_AAL5 ? 1 : 0); - - ret = 0; - - printk("ppe_open(%d.%d): conn = %d, ppe_dev.dma = %08X\n", vcc->vpi, vcc->vci, conn, (u32)&ppe_dev.dma.rx_descriptor_number); - - -PPE_OPEN_EXIT: - up(&ppe_dev.sem); - - printk("open ATM itf = %d, vpi = %d, vci = %d, ret = %d", (int)vcc->dev->dev_data, (int)vcc->vpi, vcc->vci, ret); - return ret; -} - -void ppe_close(struct atm_vcc *vcc) -{ - int conn; - struct port *port; - struct connection *connection; - int i; - - if ( vcc == NULL ) - return; - - down(&ppe_dev.sem); - - /* get connection id */ - conn = find_vcc(vcc); - if ( conn < 0 ) - { - printk("can't find vcc\n"); - goto PPE_CLOSE_EXIT; - } - if(!((Atm_Priv *)vcc)->on) - goto PPE_CLOSE_EXIT; - connection = &ppe_dev.connection[conn]; - port = &ppe_dev.port[connection->port]; - - /* clear htu */ - clear_htu_entry(conn); - - /* release connection */ - port->connection_table &= ~(1 << (conn - port->connection_base)); - connection->vcc = NULL; - connection->access_time.tv_sec = 0; - connection->access_time.tv_nsec = 0; - connection->aal5_vcc_crc_err = 0; - connection->aal5_vcc_oversize_sdu = 0; - - /* disable irq */ - for ( i = 0; i < ATM_PORT_NUMBER; i++ ) - if ( ppe_dev.port[i].max_connections != 0 && ppe_dev.port[i].connection_table != 0 ) - break; - if ( i == ATM_PORT_NUMBER ) - disable_irq(IFXMIPS_PPE_MBOX_INT); - - *MBOX_IGU1_ISRC = (1 << conn) | (1 << (conn + 16)); - -#if defined(ENABLE_RX_QOS) && ENABLE_RX_QOS - /* remove weight value from RX DMA channel */ - switch ( vcc->qos.rxtp.traffic_class ) - { - case ATM_VBR_RT: - ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT] -= vcc->qos.rxtp.max_pcr; - if ( ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_RT] > ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT] ) - ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_RT] = ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT]; - break; - case ATM_VBR_NRT: - ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT] -= vcc->qos.rxtp.pcr; - if ( ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_NRT] > ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT] ) - ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_NRT] = ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT]; - break; - case ATM_ABR: - ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR] -= vcc->qos.rxtp.min_pcr; - if ( ppe_dev.dma.rx_weight[RX_DMA_CH_AVR] > ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR] ) - ppe_dev.dma.rx_weight[RX_DMA_CH_AVR] = ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR]; - break; - case ATM_CBR: - case ATM_UBR_PLUS: - default: - break; - } -#endif // defined(ENABLE_RX_QOS) && ENABLE_RX_QOS - - /* release bandwidth */ - switch ( vcc->qos.txtp.traffic_class ) - { - case ATM_CBR: - case ATM_VBR_RT: - port->tx_current_cell_rate -= vcc->qos.txtp.max_pcr; - break; - case ATM_VBR_NRT: - port->tx_current_cell_rate -= vcc->qos.txtp.pcr; - break; - case ATM_UBR_PLUS: - port->tx_current_cell_rate -= vcc->qos.txtp.min_pcr; - break; - } - - /* idle for a while to let parallel operation finish */ - for ( i = 0; i < IDLE_CYCLE_NUMBER; i++ ); - ((Atm_Priv *)vcc)->on = 0; - -PPE_CLOSE_EXIT: - up(&ppe_dev.sem); -} - -int ppe_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg) -{ - return -ENOTTY; -} - -int ppe_send(struct atm_vcc *vcc, struct sk_buff *skb) -{ - int ret; - int conn; - int desc_base; - register struct tx_descriptor reg_desc; - struct tx_descriptor *desc; - - -printk("ppe_send"); -printk("ppe_send\n"); -printk("skb->users = %d\n", skb->users.counter); - - if ( vcc == NULL || skb == NULL ) - return -EINVAL; - -// down(&ppe_dev.sem); - - ATM_SKB(skb)->vcc = vcc; - conn = find_vcc(vcc); -// if ( conn != 1 ) -printk("ppe_send: conn = %d\n", conn); - if ( conn < 0 ) - { - ret = -EINVAL; - goto FIND_VCC_FAIL; - } - -printk("find_vcc"); - - if ( vcc->qos.aal == ATM_AAL5 ) - { - int byteoff; - int datalen; - struct tx_inband_header *header; - - /* allocate descriptor */ - desc_base = alloc_tx_connection(conn); - if ( desc_base < 0 ) - { - ret = -EIO; - //goto ALLOC_TX_CONNECTION_FAIL; - } - desc = &ppe_dev.dma.tx_descriptor_base[desc_base]; - - /* load descriptor from memory */ - reg_desc = *desc; - - datalen = skb->len; - byteoff = (u32)skb->data & (DMA_ALIGNMENT - 1); - if ( skb_headroom(skb) < byteoff + TX_INBAND_HEADER_LENGTH ) - { - struct sk_buff *new_skb; - -printk("skb_headroom(skb) < byteoff + TX_INBAND_HEADER_LENGTH"); -printk("skb_headroom(skb 0x%08X, skb->data 0x%08X) (%d) < byteoff (%d) + TX_INBAND_HEADER_LENGTH (%d)\n", (u32)skb, (u32)skb->data, skb_headroom(skb), byteoff, TX_INBAND_HEADER_LENGTH); - - new_skb = alloc_skb_tx(datalen); - if ( new_skb == NULL ) - { - printk("alloc_skb_tx: fail\n"); - ret = -ENOMEM; - goto ALLOC_SKB_TX_FAIL; - } - ATM_SKB(new_skb)->vcc = NULL; - skb_put(new_skb, datalen); - memcpy(new_skb->data, skb->data, datalen); - atm_free_tx_skb_vcc(skb); - skb = new_skb; - byteoff = (u32)skb->data & (DMA_ALIGNMENT - 1); - } - else - { -printk("skb_headroom(skb) >= byteoff + TX_INBAND_HEADER_LENGTH"); - } -printk("before skb_push, skb->data = 0x%08X", (u32)skb->data); - skb_push(skb, byteoff + TX_INBAND_HEADER_LENGTH); -printk("after skb_push, skb->data = 0x%08X", (u32)skb->data); - - header = (struct tx_inband_header *)(u32)skb->data; -printk("header = 0x%08X", (u32)header); - - /* setup inband trailer */ - header->uu = 0; - header->cpi = 0; - header->pad = ppe_dev.aal5.padding_byte; - header->res1 = 0; - - /* setup cell header */ - header->clp = (vcc->atm_options & ATM_ATMOPT_CLP) ? 1 : 0; - header->pti = ATM_PTI_US0; - header->vci = vcc->vci; - header->vpi = vcc->vpi; - header->gfc = 0; - - /* setup descriptor */ - reg_desc.dataptr = (u32)skb->data >> 2; - reg_desc.datalen = datalen; - reg_desc.byteoff = byteoff; - reg_desc.iscell = 0; - -printk("setup header, datalen = %d, byteoff = %d", reg_desc.datalen, reg_desc.byteoff); - - UPDATE_VCC_STAT(conn, tx_pdu, 1); - - if ( vcc->stats ) - atomic_inc(&vcc->stats->tx); - } - else - { - /* allocate descriptor */ - desc_base = alloc_tx_connection(conn); - if ( desc_base < 0 ) - { - ret = -EIO; - goto ALLOC_TX_CONNECTION_FAIL; - } - desc = &ppe_dev.dma.tx_descriptor_base[desc_base]; - - /* load descriptor from memory */ - reg_desc = *desc; - - /* if data pointer is not aligned, allocate new sk_buff */ - if ( ((u32)skb->data & (DMA_ALIGNMENT - 1)) ) - { - struct sk_buff *new_skb; - - printk("skb->data not aligned\n"); - - new_skb = alloc_skb_tx(skb->len); - if ( new_skb == NULL ) - { - ret = -ENOMEM; - goto ALLOC_SKB_TX_FAIL; - } - ATM_SKB(new_skb)->vcc = NULL; - skb_put(new_skb, skb->len); - memcpy(new_skb->data, skb->data, skb->len); - atm_free_tx_skb_vcc(skb); - skb = new_skb; - } - - reg_desc.dataptr = (u32)skb->data >> 2; - reg_desc.datalen = skb->len; - reg_desc.byteoff = 0; - reg_desc.iscell = 1; - - if ( vcc->stats ) - atomic_inc(&vcc->stats->tx); - } - - reg_desc.own = 1; - reg_desc.c = 1; - -printk("update descriptor send pointer, desc = 0x%08X", (u32)desc); - - ppe_dev.dma.tx_skb_pointers[desc_base] = skb; - *desc = reg_desc; - dma_cache_wback((unsigned long)skb->data, skb->len); - - mailbox_signal(conn, 1); - -printk("ppe_send: success"); -// up(&ppe_dev.sem); - - return 0; - -FIND_VCC_FAIL: - printk("FIND_VCC_FAIL\n"); - -// up(&ppe_dev.sem); - ppe_dev.mib.wtx_err_pdu++; - atm_free_tx_skb_vcc(skb); - - return ret; - -ALLOC_SKB_TX_FAIL: - printk("ALLOC_SKB_TX_FAIL\n"); - -// up(&ppe_dev.sem); - if ( vcc->qos.aal == ATM_AAL5 ) - { - UPDATE_VCC_STAT(conn, tx_err_pdu, 1); - ppe_dev.mib.wtx_err_pdu++; - } - if ( vcc->stats ) - atomic_inc(&vcc->stats->tx_err); - atm_free_tx_skb_vcc(skb); - - return ret; - -ALLOC_TX_CONNECTION_FAIL: - printk("ALLOC_TX_CONNECTION_FAIL\n"); - -// up(&ppe_dev.sem); - if ( vcc->qos.aal == ATM_AAL5 ) - { - UPDATE_VCC_STAT(conn, tx_sw_drop_pdu, 1); - ppe_dev.mib.wtx_drop_pdu++; - } - if ( vcc->stats ) - atomic_inc(&vcc->stats->tx_err); - atm_free_tx_skb_vcc(skb); - - return ret; -} - -int ppe_send_oam(struct atm_vcc *vcc, void *cell, int flags) -{ - int conn; - struct uni_cell_header *uni_cell_header = (struct uni_cell_header *)cell; - int desc_base; - struct sk_buff *skb; - register struct tx_descriptor reg_desc; - struct tx_descriptor *desc; - -printk("ppe_send_oam"); - - if ( ((uni_cell_header->pti == ATM_PTI_SEGF5 || uni_cell_header->pti == ATM_PTI_E2EF5) - && find_vpivci(uni_cell_header->vpi, uni_cell_header->vci) < 0) - || ((uni_cell_header->vci == 0x03 || uni_cell_header->vci == 0x04) - && find_vpi(uni_cell_header->vpi) < 0) ) - return -EINVAL; - -#if OAM_TX_QUEUE_NUMBER_PER_PORT != 0 - /* get queue ID of OAM TX queue, and the TX DMA channel ID is the same as queue ID */ - conn = ppe_dev.port[(int)vcc->dev->dev_data].oam_tx_queue; -#else - /* find queue ID */ - conn = find_vcc(vcc); - if ( conn < 0 ) - { - printk("OAM not find queue\n"); -// up(&ppe_dev.sem); - return -EINVAL; - } -#endif // OAM_TX_QUEUE_NUMBER_PER_PORT != 0 - - /* allocate descriptor */ - desc_base = alloc_tx_connection(conn); - if ( desc_base < 0 ) - { - printk("OAM not alloc tx connection\n"); -// up(&ppe_dev.sem); - return -EIO; - } - - desc = &ppe_dev.dma.tx_descriptor_base[desc_base]; - - /* load descriptor from memory */ - reg_desc = *(struct tx_descriptor *)desc; - - /* allocate sk_buff */ - skb = alloc_skb_tx(CELL_SIZE); - if ( skb == NULL ) - { -// up(&ppe_dev.sem); - return -ENOMEM; - } -#if OAM_TX_QUEUE_NUMBER_PER_PORT != 0 - ATM_SKB(skb)->vcc = NULL; -#else - ATM_SKB(skb)->vcc = vcc; -#endif // OAM_TX_QUEUE_NUMBER_PER_PORT != 0 - - /* copy data */ - skb_put(skb, CELL_SIZE); - memcpy(skb->data, cell, CELL_SIZE); - - /* setup descriptor */ - reg_desc.dataptr = (u32)skb->data >> 2; - reg_desc.datalen = CELL_SIZE; - reg_desc.byteoff = 0; - reg_desc.iscell = 1; - reg_desc.own = 1; - reg_desc.c = 1; - - /* update descriptor send pointer */ - ppe_dev.dma.tx_skb_pointers[desc_base] = skb; - - /* write discriptor to memory and write back cache */ - *(struct tx_descriptor *)desc = reg_desc; - dma_cache_wback((unsigned long)skb->data, skb->len); - - /* signal PPE */ - mailbox_signal(conn, 1); - - return 0; -} - -int ppe_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags) -{ - int conn; - printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); - - if(vcc == NULL || qos == NULL ) - return -EINVAL; - conn = find_vcc(vcc); - if ( conn < 0 ) - return -EINVAL; - set_qsb(vcc, qos, conn); - - return 0; -} - -static inline void init_chip(void) -{ - /* enable PPE module in PMU */ - *(unsigned long *)0xBF10201C &= ~((1 << 15) | (1 << 13) | (1 << 9)); - - *EMA_CMDCFG = (EMA_CMD_BUF_LEN << 16) | (EMA_CMD_BASE_ADDR >> 2); - *EMA_DATACFG = (EMA_DATA_BUF_LEN << 16) | (EMA_DATA_BASE_ADDR >> 2); - *EMA_IER = 0x000000FF; - *EMA_CFG = EMA_READ_BURST | (EMA_WRITE_BURST << 2); - - /* enable mailbox */ - *MBOX_IGU1_ISRC = 0xFFFFFFFF; - *MBOX_IGU1_IER = 0x00000000; - *MBOX_IGU3_ISRC = 0xFFFFFFFF; - *MBOX_IGU3_IER = 0x00000000; -} - -int pp32_download_code(u32 *code_src, unsigned int code_dword_len, u32 *data_src, unsigned int data_dword_len) -{ - u32 reg_old_value; - volatile u32 *dest; - - if ( code_src == 0 || ((unsigned long)code_src & 0x03) != 0 - || data_src == 0 || ((unsigned long)data_src & 0x03) ) - return -EINVAL; - - /* save the old value of CDM_CFG and set PPE code memory to FPI bus access mode */ - reg_old_value = *CDM_CFG; - if ( code_dword_len <= 4096 ) - *CDM_CFG = CDM_CFG_RAM1_SET(0x00) | CDM_CFG_RAM0_SET(0x00); - else - *CDM_CFG = CDM_CFG_RAM1_SET(0x01) | CDM_CFG_RAM0_SET(0x00); - - /* copy code */ - dest = CDM_CODE_MEMORY_RAM0_ADDR(0); - while ( code_dword_len-- > 0 ) - *dest++ = *code_src++; - - /* copy data */ - dest = PP32_DATA_MEMORY_RAM1_ADDR(0); - while ( data_dword_len-- > 0 ) - *dest++ = *data_src++; - - return 0; -} - -int pp32_start(void) -{ - int ret; - register int i; - init_chip(); - /* download firmware */ - ret = pp32_download_code(firmware_binary_code, sizeof(firmware_binary_code) / sizeof(*firmware_binary_code), firmware_binary_data, sizeof(firmware_binary_data) / sizeof(*firmware_binary_data)); - if ( ret ) - return ret; - - /* run PP32 */ - *PP32_DBG_CTRL = DBG_CTRL_START_SET(1); - - /* idle for a while to let PP32 init itself */ - for ( i = 0; i < IDLE_CYCLE_NUMBER; i++ ); - - return 0; -} - -void pp32_stop(void) -{ - /* halt PP32 */ - *PP32_DBG_CTRL = DBG_CTRL_STOP_SET(1); -} -- cgit v1.2.3