From 405e21d16731b2764ab82aaaadcf36a813b105f7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 10 Oct 2012 12:32:29 +0000 Subject: packages: sort network related packages into package/network/ SVN-Revision: 33688 --- package/hostapd/Config.in | 47 --- package/hostapd/Makefile | 342 ----------------- package/hostapd/files/hostapd-full.config | 164 --------- package/hostapd/files/hostapd-mini.config | 157 -------- package/hostapd/files/hostapd.sh | 276 -------------- package/hostapd/files/multicall.c | 28 -- package/hostapd/files/wpa_supplicant-full.config | 408 --------------------- package/hostapd/files/wpa_supplicant-mini.config | 406 -------------------- package/hostapd/files/wpa_supplicant.sh | 199 ---------- package/hostapd/files/wps-hotplug.sh | 6 - package/hostapd/patches/100-pending_work.patch | 123 ------- .../patches/300-nl80211_multicall_fixes.patch | 60 --- .../hostapd/patches/310-multicall_bridge_fix.patch | 45 --- .../hostapd/patches/320-madwifi_key_fixes.patch | 34 -- package/hostapd/patches/400-noscan.patch | 32 -- package/hostapd/patches/410-multicall.patch | 246 ------------- package/hostapd/patches/420-timestamp_check.patch | 12 - .../hostapd/patches/430-rescan_immediately.patch | 11 - package/hostapd/patches/440-optional_rfkill.patch | 261 ------------- .../hostapd/patches/450-reload_freq_change.patch | 23 -- .../patches/451-nl80211_del_beacon_bss.patch | 63 ---- .../hostapd/patches/452-ctrl_iface_reload.patch | 98 ----- package/hostapd/patches/453-ap_sta_support.patch | 221 ----------- .../patches/460-disable_ctrl_iface_mib.patch | 168 --------- .../patches/470-wpa_ie_cap_workaround.patch | 56 --- .../patches/480-terminate_on_setup_failure.patch | 81 ---- .../patches/500-random_pool_add_kernel.patch | 168 --------- .../hostapd/patches/510-bring_down_interface.patch | 19 - .../hostapd/patches/520-fix_wps_pin_crash.patch | 12 - .../patches/530-wps_single_auth_enc_type.patch | 25 -- .../hostapd/patches/540-dynamic_20_40_mhz.patch | 202 ---------- .../hostapd/patches/550-limit_debug_messages.patch | 213 ----------- .../hostapd/patches/560-indicate-features.patch | 82 ----- .../hostapd/patches/570-genl_connect_debug.patch | 11 - package/hostapd/patches/580-fix_bss_addr.patch | 11 - .../hostapd/patches/590-hostapd_cli_ifdef.patch | 50 --- ...ant-add-new-config-params-to-be-used-with.patch | 211 ----------- ...80211-use-new-parameters-during-ibss-join.patch | 59 --- .../patches/604-wpa_s-support-htmode-param.patch | 156 -------- .../hostapd/patches/610-max_num_sta_probe.patch | 13 - 40 files changed, 4799 deletions(-) delete mode 100644 package/hostapd/Config.in delete mode 100644 package/hostapd/Makefile delete mode 100644 package/hostapd/files/hostapd-full.config delete mode 100644 package/hostapd/files/hostapd-mini.config delete mode 100644 package/hostapd/files/hostapd.sh delete mode 100644 package/hostapd/files/multicall.c delete mode 100644 package/hostapd/files/wpa_supplicant-full.config delete mode 100644 package/hostapd/files/wpa_supplicant-mini.config delete mode 100644 package/hostapd/files/wpa_supplicant.sh delete mode 100644 package/hostapd/files/wps-hotplug.sh delete mode 100644 package/hostapd/patches/100-pending_work.patch delete mode 100644 package/hostapd/patches/300-nl80211_multicall_fixes.patch delete mode 100644 package/hostapd/patches/310-multicall_bridge_fix.patch delete mode 100644 package/hostapd/patches/320-madwifi_key_fixes.patch delete mode 100644 package/hostapd/patches/400-noscan.patch delete mode 100644 package/hostapd/patches/410-multicall.patch delete mode 100644 package/hostapd/patches/420-timestamp_check.patch delete mode 100644 package/hostapd/patches/430-rescan_immediately.patch delete mode 100644 package/hostapd/patches/440-optional_rfkill.patch delete mode 100644 package/hostapd/patches/450-reload_freq_change.patch delete mode 100644 package/hostapd/patches/451-nl80211_del_beacon_bss.patch delete mode 100644 package/hostapd/patches/452-ctrl_iface_reload.patch delete mode 100644 package/hostapd/patches/453-ap_sta_support.patch delete mode 100644 package/hostapd/patches/460-disable_ctrl_iface_mib.patch delete mode 100644 package/hostapd/patches/470-wpa_ie_cap_workaround.patch delete mode 100644 package/hostapd/patches/480-terminate_on_setup_failure.patch delete mode 100644 package/hostapd/patches/500-random_pool_add_kernel.patch delete mode 100644 package/hostapd/patches/510-bring_down_interface.patch delete mode 100644 package/hostapd/patches/520-fix_wps_pin_crash.patch delete mode 100644 package/hostapd/patches/530-wps_single_auth_enc_type.patch delete mode 100644 package/hostapd/patches/540-dynamic_20_40_mhz.patch delete mode 100644 package/hostapd/patches/550-limit_debug_messages.patch delete mode 100644 package/hostapd/patches/560-indicate-features.patch delete mode 100644 package/hostapd/patches/570-genl_connect_debug.patch delete mode 100644 package/hostapd/patches/580-fix_bss_addr.patch delete mode 100644 package/hostapd/patches/590-hostapd_cli_ifdef.patch delete mode 100644 package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch delete mode 100644 package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch delete mode 100644 package/hostapd/patches/604-wpa_s-support-htmode-param.patch delete mode 100644 package/hostapd/patches/610-max_num_sta_probe.patch (limited to 'package/hostapd') diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in deleted file mode 100644 index 810c5a09a9..0000000000 --- a/package/hostapd/Config.in +++ /dev/null @@ -1,47 +0,0 @@ -# wpa_supplicant config -config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK - bool "Disable timestamp check" - depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini - default n - help - This disables the timestamp check for certificates in wpa_supplicant - Useful for devices without RTC that cannot reliably get the real date/time - -choice - prompt "Choose TLS provider" - default WPA_SUPPLICANT_INTERNAL - depends PACKAGE_wpa-supplicant || PACKAGE_wpad - -config WPA_SUPPLICANT_INTERNAL - bool "internal" - -config WPA_SUPPLICANT_OPENSSL - bool "openssl" - select PACKAGE_libopenssl - -endchoice - -config WPA_RFKILL_SUPPORT - bool "Add rfkill support" - depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini - default n - -config WPA_MSG_MIN_PRIORITY - int "Minimum debug message priority" - default 3 - help - Useful values are: - 0 = all messages - 1 = raw message dumps - 2 = most debugging messages - 3 = info messages - 4 = warnings - 5 = errors - -config DRIVER_WEXT_SUPPORT - bool - default n - -config DRIVER_11N_SUPPORT - bool - default n diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile deleted file mode 100644 index bc4384f5e7..0000000000 --- a/package/hostapd/Makefile +++ /dev/null @@ -1,342 +0,0 @@ -# -# Copyright (C) 2006-2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -PKG_NAME:=hostapd -PKG_VERSION:=20120910 -PKG_RELEASE:=1 -PKG_REV:=762b99db7a76803d1ad274e87caa6fe870d47441 - -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git -PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE_VERSION:=$(PKG_REV) -PKG_SOURCE_PROTO:=git -PKG_MIRROR_MD5SUM:=fa3227c146cb50732fe8511ce6d1d862 - -PKG_MAINTAINER:=Felix Fietkau - -PKG_BUILD_PARALLEL:=1 - -PKG_BUILD_DEPENDS:= \ - PACKAGE_kmod-madwifi:madwifi \ - -PKG_CONFIG_DEPENDS:= \ - CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \ - CONFIG_PACKAGE_kmod-ath9k \ - CONFIG_PACKAGE_kmod-mac80211 \ - CONFIG_PACKAGE_kmod-madwifi \ - CONFIG_PACKAGE_hostapd \ - CONFIG_PACKAGE_hostapd-mini \ - CONFIG_PACKAGE_kmod-hostap \ - CONFIG_WPA_RFKILL_SUPPORT \ - CONFIG_DRIVER_WEXT_SUPPORT \ - CONFIG_DRIVER_11N_SUPPORT - -LOCAL_TYPE=$(strip \ - $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \ - $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \ - hostapd \ - ))) -LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT))) - -ifeq ($(LOCAL_TYPE),supplicant) - ifeq ($(LOCAL_VARIANT),full) - PKG_CONFIG_DEPENDS += \ - CONFIG_WPA_SUPPLICANT_INTERNAL \ - CONFIG_WPA_SUPPLICANT_OPENSSL - endif -endif - -PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) - -include $(INCLUDE_DIR)/package.mk - -STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY) - -ifneq ($(CONFIG_DRIVER_11N_SUPPORT),) - HOSTAPD_IEEE80211N:=y -endif - -DRIVER_MAKEOPTS= \ - CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \ - CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \ - CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \ - CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \ - CONFIG_IEEE80211W=$(CONFIG_PACKAGE_kmod-ath9k) \ - CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \ - $(if $(CONFIG_WPA_RFKILL_SUPPORT),NEED_RFKILL=y) - -ifneq ($(LOCAL_TYPE),hostapd) - ifdef CONFIG_WPA_SUPPLICANT_OPENSSL - ifeq ($(LOCAL_VARIANT),full) - DRIVER_MAKEOPTS += CONFIG_TLS=openssl - TARGET_LDFLAGS += -lcrypto -lssl - endif - endif - ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK - TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK - endif - DRIVER_MAKEOPTS += \ - CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch) -endif - -DRV_DEPENDS:=+PACKAGE_kmod-mac80211:libnl-tiny @(!(TARGET_avr32||TARGET_etrax)||BROKEN) - -define Package/hostapd/Default - SECTION:=net - CATEGORY:=Network - TITLE:=IEEE 802.1x Authenticator - URL:=http://hostap.epitest.fi/ - DEPENDS:=$(DRV_DEPENDS) - MAINTAINER:=Felix Fietkau -endef - -define Package/hostapd -$(call Package/hostapd/Default) - TITLE+= (full) - VARIANT:=full -endef - -define Package/hostapd/description - This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS - Authenticator. -endef - -define Package/hostapd-mini -$(call Package/hostapd/Default) - TITLE+= (WPA-PSK only) - VARIANT:=mini -endef - -define Package/hostapd-mini/description - This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only). -endef - -define Package/hostapd-utils - $(call Package/hostapd/Default) - TITLE+= (utils) - DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini -endef - -define Package/hostapd-utils/description - This package contains a command line utility to control the - IEEE 802.1x/WPA/EAP/RADIUS Authenticator. -endef - -define Package/wpad/Default - SECTION:=net - CATEGORY:=Network - TITLE:=IEEE 802.1x Authenticator/Supplicant - URL:=http://hostap.epitest.fi/ - MAINTAINER:=Felix Fietkau -endef - -define Package/wpad -$(call Package/wpad/Default) - TITLE+= (full) - DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl - VARIANT:=wpad-full -endef - -define Package/wpad/description - This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS - Authenticator and Supplicant -endef - -define Package/wpad-mini -$(call Package/wpad/Default) - TITLE+= (WPA-PSK only) - DEPENDS:=$(DRV_DEPENDS) - VARIANT:=wpad-mini -endef - -define Package/wpad-mini/description - This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only). -endef - -define Package/wpa-supplicant - SECTION:=net - CATEGORY:=Network - TITLE:=WPA Supplicant - URL:=http://hostap.epitest.fi/wpa_supplicant/ - DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl - VARIANT:=supplicant-full - MAINTAINER:=Felix Fietkau -endef - -define Package/wpa-supplicant/Description - WPA Supplicant -endef - -define Package/wpa-supplicant/config - source "$(SOURCE)/Config.in" -endef - -define Package/wpa-supplicant-mini - $(Package/wpa-supplicant) - TITLE:=WPA Supplicant (minimal version) - DEPENDS:=$(DRV_DEPENDS) - VARIANT:=supplicant-mini -endef - -define Package/wpa-supplicant-mini/Description - WPA Supplicant (minimal version) -endef - -define Package/wpa-cli - SECTION:=net - CATEGORY:=Network - DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpad-mini||PACKAGE_wpad - TITLE:=WPA Supplicant command line interface - MAINTAINER:=Felix Fietkau -endef - -define Package/wpa-cli/Description - WPA Supplicant control utility -endef - - -ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED))) - define Build/Configure/rebuild - $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f - rm -f $(PKG_BUILD_DIR)/hostapd/hostapd - rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant - rm -f $(PKG_BUILD_DIR)/.config_* - touch $(subst .configured_,.config_,$(STAMP_CONFIGURED)) - endef -endif - -define Build/Configure - $(Build/Configure/rebuild) - $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config - $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config -endef - -TARGET_CPPFLAGS := \ - -I$(STAGING_DIR)/usr/include/libnl-tiny \ - -I$(PKG_BUILD_DIR)/src/crypto \ - $(TARGET_CPPFLAGS) \ - -I$(STAGING_DIR)/usr/include/madwifi \ - -DCONFIG_LIBNL20 \ - -D_GNU_SOURCE \ - $(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY)) - -TARGET_CFLAGS += -ffunction-sections -fdata-sections -TARGET_LDFLAGS += -Wl,--gc-sections - -ifdef CONFIG_PACKAGE_kmod-mac80211 - TARGET_LDFLAGS += -lm -lnl-tiny -endif - -define Build/RunMake - CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \ - $(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \ - $(TARGET_CONFIGURE_OPTS) \ - $(DRIVER_MAKEOPTS) \ - LIBS="$(TARGET_LDFLAGS)" \ - BCHECK= \ - $(2) -endef - -define Build/Compile/wpad - echo ` \ - $(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \ - $(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \ - sed -e 's,-n ,,g' -e 's,$(TARGET_CFLAGS),,' \ - ` > $(PKG_BUILD_DIR)/.cflags - +$(call Build/RunMake,hostapd, \ - CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ - MULTICALL=1 \ - hostapd_cli hostapd_multi.a \ - ) - +$(call Build/RunMake,wpa_supplicant, \ - CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ - MULTICALL=1 \ - wpa_cli wpa_supplicant_multi.a \ - ) - $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \ - $(TARGET_CFLAGS) \ - ./files/multicall.c \ - $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \ - $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \ - $(TARGET_LDFLAGS) -endef - -define Build/Compile/hostapd - $(call Build/RunMake,hostapd, \ - hostapd hostapd_cli \ - ) -endef - -define Build/Compile/supplicant - $(call Build/RunMake,wpa_supplicant, \ - wpa_cli wpa_supplicant \ - ) -endef - -define Build/Compile - $(Build/Compile/$(LOCAL_TYPE)) -endef - -define Install/hostapd - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh - $(INSTALL_DIR) $(1)/usr/sbin -endef - -define Install/supplicant - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh - $(INSTALL_DIR) $(1)/usr/sbin -endef - -define Package/hostapd/install - $(call Install/hostapd,$(1)) - $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/ -endef -Package/hostapd-mini/install = $(Package/hostapd/install) - -ifneq ($(LOCAL_TYPE),supplicant) - define Package/hostapd-utils/install - $(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/hotplug.d/button - $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/ - $(INSTALL_DATA) ./files/wps-hotplug.sh $(1)/etc/hotplug.d/button/50-wps - endef -endif - -define Package/wpad/install - $(call Install/hostapd,$(1)) - $(call Install/supplicant,$(1)) - $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/ - ln -sf wpad $(1)/usr/sbin/hostapd - ln -sf wpad $(1)/usr/sbin/wpa_supplicant -endef -Package/wpad-mini/install = $(Package/wpad/install) - -define Package/wpa-supplicant/install - $(call Install/supplicant,$(1)) - $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/ -endef -Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install) - -ifneq ($(LOCAL_TYPE),hostapd) - define Package/wpa-cli/install - $(INSTALL_DIR) $(1)/usr/sbin - $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/ - endef -endif - -$(eval $(call BuildPackage,hostapd)) -$(eval $(call BuildPackage,hostapd-mini)) -$(eval $(call BuildPackage,wpad)) -$(eval $(call BuildPackage,wpad-mini)) -$(eval $(call BuildPackage,wpa-supplicant)) -$(eval $(call BuildPackage,wpa-supplicant-mini)) -$(eval $(call BuildPackage,wpa-cli)) -$(eval $(call BuildPackage,hostapd-utils)) diff --git a/package/hostapd/files/hostapd-full.config b/package/hostapd/files/hostapd-full.config deleted file mode 100644 index 3a0ce12fc4..0000000000 --- a/package/hostapd/files/hostapd-full.config +++ /dev/null @@ -1,164 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove support for RADIUS accounting -#CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -#CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -CONFIG_TLS=internal -CONFIG_INTERNAL_LIBTOMMATH=y -CONFIG_INTERNAL_AES=y -NEED_AES_DEC=y - -CONFIG_NO_DUMP_STATE=y - -CONFIG_WPS=y -CONFIG_FULL_DYNAMIC_VLAN=y - diff --git a/package/hostapd/files/hostapd-mini.config b/package/hostapd/files/hostapd-mini.config deleted file mode 100644 index 3e94a645b5..0000000000 --- a/package/hostapd/files/hostapd-mini.config +++ /dev/null @@ -1,157 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -# CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -#CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -#CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -#CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -#CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -#CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -#CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -#CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -#CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -#CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove support for RADIUS accounting -CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -CONFIG_TLS=internal - -CONFIG_NO_DUMP_STATE=y diff --git a/package/hostapd/files/hostapd.sh b/package/hostapd/files/hostapd.sh deleted file mode 100644 index d60c26f3c6..0000000000 --- a/package/hostapd/files/hostapd.sh +++ /dev/null @@ -1,276 +0,0 @@ -hostapd_set_bss_options() { - local var="$1" - local vif="$2" - local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible - - config_get enc "$vif" encryption - config_get wep_rekey "$vif" wep_rekey # 300 - config_get wpa_group_rekey "$vif" wpa_group_rekey # 300 - config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300 - config_get wpa_master_rekey "$vif" wpa_master_rekey # 640 - config_get_bool ap_isolate "$vif" isolate 0 - config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1 - config_get max_num_sta "$vif" max_num_sta 0 - config_get max_inactivity "$vif" max_inactivity 0 - - config_get device "$vif" device - config_get hwmode "$device" hwmode - config_get phy "$device" phy - - append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" - - if [ "$ap_isolate" -gt 0 ]; then - append "$var" "ap_isolate=$ap_isolate" "$N" - fi - if [ "$max_num_sta" -gt 0 ]; then - append "$var" "max_num_sta=$max_num_sta" "$N" - fi - if [ "$max_inactivity" -gt 0 ]; then - append "$var" "ap_max_inactivity=$max_inactivity" "$N" - fi - append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N" - - # Examples: - # psk-mixed/tkip => WPA1+2 PSK, TKIP - # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP - # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP - # ... - - # TODO: move this parsing function somewhere generic, so that - # later it can be reused by drivers that don't use hostapd - - # crypto defaults: WPA2 vs WPA1 - case "$enc" in - wpa2*|*psk2*) - wpa=2 - crypto="CCMP" - ;; - *mixed*) - wpa=3 - crypto="CCMP TKIP" - ;; - *) - wpa=1 - crypto="TKIP" - ;; - esac - - # explicit override for crypto setting - case "$enc" in - *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";; - *aes|*ccmp) crypto="CCMP";; - *tkip) crypto="TKIP";; - esac - - # enforce CCMP for 11ng and 11na - case "$hwmode:$crypto" in - *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";; - esac - - # use crypto/auth settings for building the hostapd config - case "$enc" in - *psk*) - config_get psk "$vif" key - if [ ${#psk} -eq 64 ]; then - append "$var" "wpa_psk=$psk" "$N" - else - append "$var" "wpa_passphrase=$psk" "$N" - fi - wps_possible=1 - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" - [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" - ;; - *wpa*) - # required fields? formats? - # hostapd is particular, maybe a default configuration for failures - config_get auth_server "$vif" auth_server - [ -z "$auth_server" ] && config_get auth_server "$vif" server - append "$var" "auth_server_addr=$auth_server" "$N" - config_get auth_port "$vif" auth_port - [ -z "$auth_port" ] && config_get auth_port "$vif" port - auth_port=${auth_port:-1812} - append "$var" "auth_server_port=$auth_port" "$N" - config_get auth_secret "$vif" auth_secret - [ -z "$auth_secret" ] && config_get auth_secret "$vif" key - append "$var" "auth_server_shared_secret=$auth_secret" "$N" - config_get_bool auth_cache "$vif" auth_cache 0 - [ "$auth_cache" -gt 0 ] || append "$var" "disable_pmksa_caching=1" "$N" - [ "$auth_cache" -gt 0 ] || append "$var" "okc=0" "$N" - config_get acct_server "$vif" acct_server - [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N" - config_get acct_port "$vif" acct_port - [ -n "$acct_port" ] && acct_port=${acct_port:-1813} - [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N" - config_get acct_secret "$vif" acct_secret - [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N" - config_get nasid "$vif" nasid - append "$var" "nas_identifier=$nasid" "$N" - append "$var" "eapol_key_index_workaround=1" "$N" - append "$var" "ieee8021x=1" "$N" - append "$var" "wpa_key_mgmt=WPA-EAP" "$N" - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" - [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" - ;; - *wep*) - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N" - done - append "$var" "wep_default_key=$((key - 1))" "$N" - ;; - *) - append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N" - append "$var" "wep_default_key=0" "$N" - [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N" - ;; - esac - case "$enc" in - *shared*) - auth_algs=2 - ;; - *mixed*) - auth_algs=3 - ;; - esac - wpa=0 - crypto= - ;; - *) - wpa=0 - crypto= - ;; - esac - append "$var" "auth_algs=${auth_algs:-1}" "$N" - append "$var" "wpa=$wpa" "$N" - [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N" - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - - config_get ssid "$vif" ssid - config_get bridge "$vif" bridge - config_get ieee80211d "$vif" ieee80211d - config_get iapp_interface "$vif" iapp_interface - - config_get_bool wps_pbc "$vif" wps_pushbutton 0 - config_get_bool wps_label "$vif" wps_label 0 - - config_get config_methods "$vif" wps_config - [ "$wps_pbc" -gt 0 ] && append config_methods push_button - - [ -n "$wps_possible" -a -n "$config_methods" ] && { - config_get device_type "$vif" wps_device_type "6-0050F204-1" - config_get device_name "$vif" wps_device_name "OpenWrt AP" - config_get manufacturer "$vif" wps_manufacturer "openwrt.org" - - append "$var" "eap_server=1" "$N" - append "$var" "wps_state=2" "$N" - append "$var" "ap_setup_locked=1" "$N" - append "$var" "device_type=$device_type" "$N" - append "$var" "device_name=$device_name" "$N" - append "$var" "manufacturer=$manufacturer" "$N" - append "$var" "config_methods=$config_methods" "$N" - } - - append "$var" "ssid=$ssid" "$N" - [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N" - [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N" - [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N" - - if [ "$wpa" -ge "2" ] - then - # RSN -> allow preauthentication - config_get_bool rsn_preauth "$vif" rsn_preauth "$auth_cache" - if [ -n "$bridge" -a "$rsn_preauth" = 1 ] - then - append "$var" "rsn_preauth=1" "$N" - append "$var" "rsn_preauth_interfaces=$bridge" "$N" - fi - - # RSN -> allow management frame protection - config_get ieee80211w "$vif" ieee80211w - case "$ieee80211w" in - [012]) - append "$var" "ieee80211w=$ieee80211w" "$N" - [ "$ieee80211w" -gt "0" ] && { - config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout - config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout - [ -n "$ieee80211w_max_timeout" ] && \ - append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" - [ -n "$ieee80211w_retry_timeout" ] && \ - append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N" - } - ;; - esac - fi -} - -hostapd_set_log_options() { - local var="$1" - local cfg="$2" - local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme - - config_get log_level "$cfg" log_level 2 - - config_get_bool log_80211 "$cfg" log_80211 1 - config_get_bool log_8021x "$cfg" log_8021x 1 - config_get_bool log_radius "$cfg" log_radius 1 - config_get_bool log_wpa "$cfg" log_wpa 1 - config_get_bool log_driver "$cfg" log_driver 1 - config_get_bool log_iapp "$cfg" log_iapp 1 - config_get_bool log_mlme "$cfg" log_mlme 1 - - local log_mask=$(( \ - ($log_80211 << 0) | \ - ($log_8021x << 1) | \ - ($log_radius << 2) | \ - ($log_wpa << 3) | \ - ($log_driver << 4) | \ - ($log_iapp << 5) | \ - ($log_mlme << 6) \ - )) - - append "$var" "logger_syslog=$log_mask" "$N" - append "$var" "logger_syslog_level=$log_level" "$N" - append "$var" "logger_stdout=$log_mask" "$N" - append "$var" "logger_stdout_level=$log_level" "$N" -} - -hostapd_setup_vif() { - local vif="$1" - local driver="$2" - local ifname device channel hwmode - - hostapd_cfg= - - config_get ifname "$vif" ifname - config_get device "$vif" device - config_get channel "$device" channel - config_get hwmode "$device" hwmode - - hostapd_set_log_options hostapd_cfg "$device" - hostapd_set_bss_options hostapd_cfg "$vif" - - case "$hwmode" in - *bg|*gdt|*gst|*fh) hwmode=g;; - *adt|*ast) hwmode=a;; - esac - [ "$channel" = auto ] && channel= - [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device" - cat > /var/run/hostapd-$ifname.conf < -#include -#include - -extern int hostapd_main(int argc, char **argv); -extern int wpa_supplicant_main(int argc, char **argv); - -int main(int argc, char **argv) -{ - bool restart = false; - const char *prog = argv[0]; - -restart: - if (strstr(argv[0], "hostapd")) - return hostapd_main(argc, argv); - else if (strstr(argv[0], "wpa_supplicant")) - return wpa_supplicant_main(argc, argv); - - if (!restart && argc > 1) { - argv++; - argc--; - restart = true; - goto restart; - } - - fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd []\n", prog); - return 255; -} diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config deleted file mode 100644 index f5abbad94f..0000000000 --- a/package/hostapd/files/wpa_supplicant-full.config +++ /dev/null @@ -1,408 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -NEED_80211_COMMON=y - -CONFIG_IBSS_RSN=y diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config deleted file mode 100644 index 772e1d9809..0000000000 --- a/package/hostapd/files/wpa_supplicant-mini.config +++ /dev/null @@ -1,406 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -# CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -# CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -# CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -# CONFIG_EAP_TLS=y - -# EAL-PEAP -# CONFIG_EAP_PEAP=y - -# EAP-TTLS -# CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -# CONFIG_EAP_GTC=y - -# EAP-OTP -# CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -# CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -# CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -# CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -# CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -NEED_80211_COMMON=y diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh deleted file mode 100644 index 928243e425..0000000000 --- a/package/hostapd/files/wpa_supplicant.sh +++ /dev/null @@ -1,199 +0,0 @@ -wpa_supplicant_setup_vif() { - local vif="$1" - local driver="$2" - local key="$key" - local options="$3" - local freq="" - local ht="$5" - local ap_scan="" - local scan_ssid="1" - [ -n "$4" ] && freq="frequency=$4" - - # make sure we have the encryption type and the psk - [ -n "$enc" ] || { - config_get enc "$vif" encryption - } - [ -n "$key" ] || { - config_get key "$vif" key - } - - local net_cfg bridge - config_get bridge "$vif" bridge - [ -z "$bridge" ] && { - net_cfg="$(find_net_config "$vif")" - [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")" - config_set "$vif" bridge "$bridge" - } - - local mode ifname wds modestr="" - config_get mode "$vif" mode - config_get ifname "$vif" ifname - config_get_bool wds "$vif" wds 0 - [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || { - echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface" - return 1 - } - [ "$mode" = "adhoc" ] && { - modestr="mode=1" - scan_ssid="0" - ap_scan="ap_scan=2" - } - - key_mgmt='NONE' - case "$enc" in - *none*) ;; - *wep*) - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" - done - wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" - ;; - *) - wep_key0="wep_key0=$(prepare_key_wep "$key")" - wep_tx_keyidx="wep_tx_keyidx=0" - ;; - esac - ;; - *psk*) - key_mgmt='WPA-PSK' - # if you want to use PSK with a non-nl80211 driver you - # have to use WPA-NONE and wext driver for wpa_s - [ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && { - key_mgmt='WPA-NONE' - driver='wext' - } - if [ ${#key} -eq 64 ]; then - passphrase="psk=${key}" - else - passphrase="psk=\"${key}\"" - fi - case "$enc" in - *psk2*) - proto='proto=RSN' - config_get ieee80211w "$vif" ieee80211w - ;; - *psk*) - proto='proto=WPA' - ;; - esac - ;; - *wpa*|*8021x*) - proto='proto=WPA2' - key_mgmt='WPA-EAP' - config_get ieee80211w "$vif" ieee80211w - config_get ca_cert "$vif" ca_cert - config_get eap_type "$vif" eap_type - ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} - case "$eap_type" in - tls) - pairwise='pairwise=CCMP' - group='group=CCMP' - config_get identity "$vif" identity - config_get client_cert "$vif" client_cert - config_get priv_key "$vif" priv_key - config_get priv_key_pwd "$vif" priv_key_pwd - identity="identity=\"$identity\"" - client_cert="client_cert=\"$client_cert\"" - priv_key="private_key=\"$priv_key\"" - priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" - ;; - peap|ttls) - config_get auth "$vif" auth - config_get identity "$vif" identity - config_get password "$vif" password - phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" - identity="identity=\"$identity\"" - password="password=\"$password\"" - ;; - esac - eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" - ;; - esac - - case "$ieee80211w" in - [012]) - ieee80211w="ieee80211w=$ieee80211w" - ;; - esac - - local fixed_freq bssid1 beacon_interval brates mrate - config_get ifname "$vif" ifname - config_get bridge "$vif" bridge - config_get ssid "$vif" ssid - config_get bssid "$vif" bssid - bssid1=${bssid:+"bssid=$bssid"} - beacon_interval=${beacon_int:+"beacon_interval=$beacon_int"} - - local br brval brsub brstr - [ -n "$basic_rate_list" ] && { - for br in $basic_rate_list; do - brval="$(($br / 1000))" - brsub="$((($br / 100) % 10))" - [ "$brsub" -gt 0 ] && brval="$brval.$brsub" - [ -n "$brstr" ] && brstr="$brstr," - brstr="$brstr$brval" - done - brates=${basic_rate_list:+"rates=$brstr"} - } - - local mcval="" - [ -n "$mcast_rate" ] && { - mcval="$(($mcast_rate / 1000))" - mcsub="$(( ($mcast_rate / 100) % 10 ))" - [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub" - mrate=${mcast_rate:+"mcast_rate=$mcval"} - } - - local ht_str - [ -n "$ht" ] && ht_str="htmode=$ht" - - rm -rf /var/run/wpa_supplicant-$ifname - cat > /var/run/wpa_supplicant-$ifname.conf <da, HOSTAPD_MODULE_IEEE80211, -- HOSTAPD_LEVEL_DEBUG, -- "did not acknowledge association response"); -- return; -- } -- - if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_resp) : - sizeof(mgmt->u.assoc_resp))) { - printf("handle_assoc_cb(reassoc=%d) - too short payload " -@@ -1520,11 +1513,6 @@ static void handle_assoc_cb(struct hosta - return; - } - -- if (reassoc) -- status = le_to_host16(mgmt->u.reassoc_resp.status_code); -- else -- status = le_to_host16(mgmt->u.assoc_resp.status_code); -- - sta = ap_get_sta(hapd, mgmt->da); - if (!sta) { - printf("handle_assoc_cb: STA " MACSTR " not found\n", -@@ -1532,6 +1520,19 @@ static void handle_assoc_cb(struct hosta - return; - } - -+ if (!ok) { -+ hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211, -+ HOSTAPD_LEVEL_DEBUG, -+ "did not acknowledge association response"); -+ sta->flags &= ~WLAN_STA_ASSOC_REQ_OK; -+ return; -+ } -+ -+ if (reassoc) -+ status = le_to_host16(mgmt->u.reassoc_resp.status_code); -+ else -+ status = le_to_host16(mgmt->u.assoc_resp.status_code); -+ - if (status != WLAN_STATUS_SUCCESS) - goto fail; - -@@ -1830,6 +1831,9 @@ void ieee802_11_rx_from_unknown(struct h - - sta = ap_get_sta(hapd, src); - if (sta && (sta->flags & WLAN_STA_ASSOC)) { -+ if (!hapd->conf->wds_sta) -+ return; -+ - if (wds && !(sta->flags & WLAN_STA_WDS)) { - wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for " - "STA " MACSTR " (aid %u)", ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -2661,10 +2661,10 @@ static int wpa_driver_nl80211_capa(struc - drv->data_tx_status = info.data_tx_status; - - /* -- * If poll command is supported mac80211 is new enough to -- * have everything we need to not need monitor interfaces. -+ * If poll command and tx status are supported, mac80211 is new enough -+ * to have everything we need to not need monitor interfaces. - */ -- drv->use_monitor = !info.poll_command_supported; -+ drv->use_monitor = !info.poll_command_supported || !info.data_tx_status; - - if (drv->device_ap_sme && drv->use_monitor) { - /* -@@ -6392,8 +6392,8 @@ static int wpa_driver_nl80211_hapd_send_ - pos = (u8 *) (hdr + 1); - - if (qos) { -- /* add an empty QoS header if needed */ -- pos[0] = 0; -+ /* Set highest priority in QoS header */ -+ pos[0] = 7; - pos[1] = 0; - pos += 2; - } -@@ -7698,6 +7698,10 @@ static int i802_set_wds_sta(void *priv, - } - return i802_set_sta_vlan(priv, addr, name, 0); - } else { -+ if (bridge_ifname) -+ linux_br_del_if(drv->global->ioctl_sock, bridge_ifname, -+ name); -+ - i802_set_sta_vlan(priv, addr, bss->ifname, 0); - return wpa_driver_nl80211_if_remove(priv, WPA_IF_AP_VLAN, - name); -@@ -8065,7 +8069,12 @@ static int wpa_driver_nl80211_if_remove( - if (ifindex <= 0) - return -1; - -+ nl80211_remove_iface(drv, ifindex); -+ - #ifdef HOSTAPD -+ if (type != WPA_IF_AP_BSS) -+ return 0; -+ - if (bss->added_if_into_bridge) { - if (linux_br_del_if(drv->global->ioctl_sock, bss->brname, - bss->ifname) < 0) -@@ -8079,13 +8088,6 @@ static int wpa_driver_nl80211_if_remove( - "bridge %s: %s", - bss->brname, strerror(errno)); - } --#endif /* HOSTAPD */ -- -- nl80211_remove_iface(drv, ifindex); -- --#ifdef HOSTAPD -- if (type != WPA_IF_AP_BSS) -- return 0; - - if (bss != &drv->first_bss) { - struct i802_bss *tbss; diff --git a/package/hostapd/patches/300-nl80211_multicall_fixes.patch b/package/hostapd/patches/300-nl80211_multicall_fixes.patch deleted file mode 100644 index 1d2519a937..0000000000 --- a/package/hostapd/patches/300-nl80211_multicall_fixes.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -2988,6 +2988,7 @@ static void * wpa_driver_nl80211_init(vo - drv->monitor_sock = -1; - drv->eapol_tx_sock = -1; - drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED; -+ drv->nlmode = NL80211_IFTYPE_STATION; - - if (wpa_driver_nl80211_init_nl(drv)) { - os_free(drv); -@@ -3302,17 +3303,12 @@ static void wpa_driver_nl80211_send_rfki - wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); - } - -- - static int --wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv) -+wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv, -+ int *send_rfkill_event) - { - struct i802_bss *bss = &drv->first_bss; -- int send_rfkill_event = 0; - -- drv->ifindex = if_nametoindex(bss->ifname); -- drv->first_bss.ifindex = drv->ifindex; -- --#ifndef HOSTAPD - /* - * Make sure the interface starts up in station mode unless this is a - * dynamically added interface (e.g., P2P) that was already configured -@@ -3331,7 +3327,7 @@ wpa_driver_nl80211_finish_drv_init(struc - "interface '%s' due to rfkill", - bss->ifname); - drv->if_disabled = 1; -- send_rfkill_event = 1; -+ *send_rfkill_event = 1; - } else { - wpa_printf(MSG_ERROR, "nl80211: Could not set " - "interface '%s' UP", bss->ifname); -@@ -3341,7 +3337,19 @@ wpa_driver_nl80211_finish_drv_init(struc - - netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, - 1, IF_OPER_DORMANT); --#endif /* HOSTAPD */ -+} -+ -+static int -+wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv) -+{ -+ struct i802_bss *bss = &drv->first_bss; -+ int send_rfkill_event = 0; -+ -+ drv->ifindex = if_nametoindex(bss->ifname); -+ drv->first_bss.ifindex = drv->ifindex; -+ -+ if (drv->nlmode == NL80211_IFTYPE_STATION) -+ wpa_driver_nl80211_finish_drv_init_sta(drv, &send_rfkill_event); - - if (wpa_driver_nl80211_capa(drv)) - return -1; diff --git a/package/hostapd/patches/310-multicall_bridge_fix.patch b/package/hostapd/patches/310-multicall_bridge_fix.patch deleted file mode 100644 index 59bfe5177a..0000000000 --- a/package/hostapd/patches/310-multicall_bridge_fix.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -893,6 +893,10 @@ static void wpa_driver_nl80211_event_rtm - return; - } - -+ if (ifi->ifi_family == AF_BRIDGE && -+ drv->nlmode != NL80211_IFTYPE_AP) -+ return; -+ - wpa_printf(MSG_DEBUG, "RTM_NEWLINK: operstate=%d ifi_flags=0x%x " - "(%s%s%s%s)", - drv->operstate, ifi->ifi_flags, -@@ -1000,6 +1004,10 @@ static void wpa_driver_nl80211_event_rtm - attrlen = len; - attr = (struct rtattr *) buf; - -+ if (ifi->ifi_family == AF_BRIDGE && -+ drv->nlmode != NL80211_IFTYPE_AP) -+ return; -+ - rta_len = RTA_ALIGN(sizeof(struct rtattr)); - while (RTA_OK(attr, attrlen)) { - if (attr->rta_type == IFLA_IFNAME) { -@@ -2990,6 +2998,11 @@ static void * wpa_driver_nl80211_init(vo - drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED; - drv->nlmode = NL80211_IFTYPE_STATION; - -+#ifdef HOSTAPD -+ drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int); -+ drv->if_indices = drv->default_if_indices; -+#endif -+ - if (wpa_driver_nl80211_init_nl(drv)) { - os_free(drv); - return NULL; -@@ -7819,8 +7832,6 @@ static void *i802_init(struct hostapd_da - br_ifindex = 0; - } - -- drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int); -- drv->if_indices = drv->default_if_indices; - for (i = 0; i < params->num_bridge; i++) { - if (params->bridge[i]) { - ifindex = if_nametoindex(params->bridge[i]); diff --git a/package/hostapd/patches/320-madwifi_key_fixes.patch b/package/hostapd/patches/320-madwifi_key_fixes.patch deleted file mode 100644 index 45a7ac6c83..0000000000 --- a/package/hostapd/patches/320-madwifi_key_fixes.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/src/drivers/driver_madwifi.c -+++ b/src/drivers/driver_madwifi.c -@@ -453,7 +453,9 @@ wpa_driver_madwifi_set_key(const char *i - - memset(&wk, 0, sizeof(wk)); - wk.ik_type = cipher; -- wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT; -+ wk.ik_flags = IEEE80211_KEY_RECV; -+ if (set_tx) -+ wk.ik_flags |= IEEE80211_KEY_XMIT; - if (addr == NULL || is_broadcast_ether_addr(addr)) { - memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN); - wk.ik_keyix = key_idx; -@@ -465,6 +467,20 @@ wpa_driver_madwifi_set_key(const char *i - wk.ik_keylen = key_len; - memcpy(wk.ik_keydata, key, key_len); - -+#ifdef WORDS_BIGENDIAN -+#define WPA_KEY_RSC_LEN 8 -+ { -+ size_t i; -+ u8 tmp[WPA_KEY_RSC_LEN]; -+ os_memset(tmp, 0, sizeof(tmp)); -+ for (i = 0; i < seq_len; i++) -+ tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i]; -+ os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN); -+ } -+#else /* WORDS_BIGENDIAN */ -+ os_memcpy(&wk.ik_keyrsc, seq, seq_len); -+#endif /* WORDS_BIGENDIAN */ -+ - ret = set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk)); - if (ret < 0) { - wpa_printf(MSG_DEBUG, "%s: Failed to set key (addr %s" diff --git a/package/hostapd/patches/400-noscan.patch b/package/hostapd/patches/400-noscan.patch deleted file mode 100644 index 69d026b3da..0000000000 --- a/package/hostapd/patches/400-noscan.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/hostapd/config_file.c -+++ b/hostapd/config_file.c -@@ -2485,6 +2485,8 @@ static int hostapd_config_fill(struct ho - } - #endif /* CONFIG_IEEE80211W */ - #ifdef CONFIG_IEEE80211N -+ } else if (os_strcmp(buf, "noscan") == 0) { -+ conf->noscan = atoi(pos); - } else if (os_strcmp(buf, "ieee80211n") == 0) { - conf->ieee80211n = atoi(pos); - } else if (os_strcmp(buf, "ht_capab") == 0) { ---- a/src/ap/ap_config.h -+++ b/src/ap/ap_config.h -@@ -497,6 +497,7 @@ struct hostapd_config { - - int ht_op_mode_fixed; - u16 ht_capab; -+ int noscan; - int ieee80211n; - int secondary_channel; - int require_ht; ---- a/src/ap/hw_features.c -+++ b/src/ap/hw_features.c -@@ -493,7 +493,7 @@ static int ieee80211n_check_40mhz(struct - { - struct wpa_driver_scan_params params; - -- if (!iface->conf->secondary_channel) -+ if (!iface->conf->secondary_channel || iface->conf->noscan) - return 0; /* HT40 not used */ - - wpa_printf(MSG_DEBUG, "Scan for neighboring BSSes prior to enabling " diff --git a/package/hostapd/patches/410-multicall.patch b/package/hostapd/patches/410-multicall.patch deleted file mode 100644 index 7900428aea..0000000000 --- a/package/hostapd/patches/410-multicall.patch +++ /dev/null @@ -1,246 +0,0 @@ ---- a/hostapd/Makefile -+++ b/hostapd/Makefile -@@ -14,6 +14,7 @@ CFLAGS += -I../src/utils - # CFLAGS += -DUSE_KERNEL_HEADERS -I/usr/src/linux/include - - -include .config -+-include $(if $(MULTICALL), ../wpa_supplicant/.config) - - ifndef CONFIG_OS - ifdef CONFIG_NATIVE_WINDOWS -@@ -188,10 +189,14 @@ ifdef CONFIG_IEEE80211AC - CFLAGS += -DCONFIG_IEEE80211AC - endif - -+ifndef MULTICALL -+CFLAGS += -DNO_SUPPLICANT -+endif -+ - include ../src/drivers/drivers.mak --OBJS += $(DRV_AP_OBJS) --CFLAGS += $(DRV_AP_CFLAGS) --LDFLAGS += $(DRV_AP_LDFLAGS) -+OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS))) -+CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS)) -+LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS)) - LIBS += $(DRV_AP_LIBS) - - ifdef CONFIG_L2_PACKET -@@ -867,6 +872,12 @@ install: all - - BCHECK=../src/drivers/build.hostapd - -+hostapd_multi.a: $(BCHECK) $(OBJS) -+ $(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c -+ @$(E) " CC " $< -+ @rm -f $@ -+ @$(AR) cr $@ hostapd_multi.o $(OBJS) -+ - hostapd: $(BCHECK) $(OBJS) - $(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS) - @$(E) " LD " $@ -@@ -905,6 +916,12 @@ HOBJS += ../src/crypto/aes-internal.o - HOBJS += ../src/crypto/aes-internal-enc.o - endif - -+dump_cflags: -+ @echo -n $(CFLAGS) " " -+ -+dump_ldflags: -+ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " " -+ - nt_password_hash: $(NOBJS) - $(Q)$(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n) - @$(E) " LD " $@ ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -14,6 +14,7 @@ CFLAGS += -I../src - CFLAGS += -I../src/utils - - -include .config -+-include $(if $(MULTICALL),../hostapd/.config) - - BINALL=wpa_supplicant wpa_cli - -@@ -705,6 +706,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS - CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS - LIBS += -ldl -rdynamic - endif -+else -+ ifdef MULTICALL -+ OBJS += ../src/eap_common/eap_common.o -+ endif - endif - - ifdef CONFIG_AP -@@ -713,9 +718,11 @@ NEED_EAP_COMMON=y - NEED_RSN_AUTHENTICATOR=y - CFLAGS += -DCONFIG_AP - OBJS += ap.o -+ifndef MULTICALL - CFLAGS += -DCONFIG_NO_RADIUS - CFLAGS += -DCONFIG_NO_ACCOUNTING - CFLAGS += -DCONFIG_NO_VLAN -+endif - OBJS += ../src/ap/hostapd.o - OBJS += ../src/ap/wpa_auth_glue.o - OBJS += ../src/ap/utils.o -@@ -770,10 +777,18 @@ endif - ifdef CONFIG_HS20 - OBJS += ../src/ap/hs20.o - endif -+else -+ ifdef MULTICALL -+ OBJS += ../src/eap_server/eap_server.o -+ OBJS += ../src/eap_server/eap_server_identity.o -+ OBJS += ../src/eap_server/eap_server_methods.o -+ endif - endif - - ifdef NEED_RSN_AUTHENTICATOR -+ifndef MULTICALL - CFLAGS += -DCONFIG_NO_RADIUS -+endif - NEED_AES_WRAP=y - OBJS += ../src/ap/wpa_auth.o - OBJS += ../src/ap/wpa_auth_ie.o -@@ -1515,6 +1530,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv) - - $(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config - -+wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs) -+ $(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c -+ @$(E) " CC " $< -+ @rm -f $@ -+ @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS) -+ - wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs) - $(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS) - @$(E) " LD " $@ -@@ -1585,6 +1606,12 @@ eap_ikev2.so: ../src/eap_peer/eap_ikev2. - %@.service: %.service.arg.in - sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@ - -+dump_cflags: -+ @echo -n $(CFLAGS) " " -+ -+dump_ldflags: -+ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " " -+ - wpa_supplicant.exe: wpa_supplicant - mv -f $< $@ - wpa_cli.exe: wpa_cli ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -3686,8 +3686,8 @@ union wpa_event_data { - * Driver wrapper code should call this function whenever an event is received - * from the driver. - */ --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data); -+extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); - - - /* ---- a/src/ap/drv_callbacks.c -+++ b/src/ap/drv_callbacks.c -@@ -685,8 +685,8 @@ static void hostapd_event_eapol_rx(struc - } - - --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data) -+void hostapd_wpa_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data) - { - struct hostapd_data *hapd = ctx; - #ifndef CONFIG_NO_STDOUT_DEBUG ---- a/wpa_supplicant/wpa_priv.c -+++ b/wpa_supplicant/wpa_priv.c -@@ -819,8 +819,8 @@ static void wpa_priv_send_ft_response(st - } - - --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data) -+static void supplicant_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data) - { - struct wpa_priv_interface *iface = ctx; - -@@ -962,6 +962,7 @@ int main(int argc, char *argv[]) - if (os_program_init()) - return -1; - -+ wpa_supplicant_event = supplicant_event; - wpa_priv_fd_workaround(); - - for (;;) { ---- a/wpa_supplicant/events.c -+++ b/wpa_supplicant/events.c -@@ -2258,8 +2258,8 @@ static void wnm_action_rx(struct wpa_sup - } - - --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data) -+void supplicant_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data) - { - struct wpa_supplicant *wpa_s = ctx; - u16 reason_code = 0; ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -2921,6 +2921,9 @@ static void wpa_supplicant_deinit_iface( - } - } - -+extern void supplicant_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); -+ - - /** - * wpa_supplicant_add_iface - Add a new network interface -@@ -3113,6 +3116,7 @@ struct wpa_global * wpa_supplicant_init( - wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb); - #endif /* CONFIG_NO_WPA_MSG */ - -+ wpa_supplicant_event = supplicant_event; - wpa_debug_open_file(params->wpa_debug_file_path); - if (params->wpa_debug_syslog) - wpa_debug_open_syslog(); ---- a/hostapd/main.c -+++ b/hostapd/main.c -@@ -530,6 +530,9 @@ static int hostapd_get_global_ctrl_iface - return 0; - } - -+void hostapd_wpa_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); -+ - - int main(int argc, char *argv[]) - { -@@ -555,6 +558,7 @@ int main(int argc, char *argv[]) - interfaces.global_iface_name = NULL; - interfaces.global_ctrl_sock = -1; - -+ wpa_supplicant_event = hostapd_wpa_event; - for (;;) { - c = getopt(argc, argv, "Bde:f:hKP:tvg:"); - if (c < 0) ---- a/src/drivers/drivers.c -+++ b/src/drivers/drivers.c -@@ -7,7 +7,11 @@ - */ - - #include "includes.h" -+#include "common.h" -+#include "driver.h" - -+void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); - - #ifdef CONFIG_DRIVER_WEXT - extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */ diff --git a/package/hostapd/patches/420-timestamp_check.patch b/package/hostapd/patches/420-timestamp_check.patch deleted file mode 100644 index b2d4a05115..0000000000 --- a/package/hostapd/patches/420-timestamp_check.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/src/tls/x509v3.c -+++ b/src/tls/x509v3.c -@@ -1848,6 +1848,9 @@ int x509_certificate_chain_validate(stru - if (chain_trusted) - continue; - -+#ifdef NO_TIMESTAMP_CHECK -+ disable_time_checks = 1; -+#endif - if (!disable_time_checks && - ((unsigned long) now.sec < - (unsigned long) cert->not_before || diff --git a/package/hostapd/patches/430-rescan_immediately.patch b/package/hostapd/patches/430-rescan_immediately.patch deleted file mode 100644 index 51d41f8001..0000000000 --- a/package/hostapd/patches/430-rescan_immediately.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -2388,7 +2388,7 @@ static struct wpa_supplicant * wpa_suppl - if (wpa_s == NULL) - return NULL; - wpa_s->scan_req = 1; -- wpa_s->scan_interval = 5; -+ wpa_s->scan_interval = 1; - wpa_s->new_connection = 1; - wpa_s->parent = wpa_s; - wpa_s->sched_scanning = 0; diff --git a/package/hostapd/patches/440-optional_rfkill.patch b/package/hostapd/patches/440-optional_rfkill.patch deleted file mode 100644 index be18458b24..0000000000 --- a/package/hostapd/patches/440-optional_rfkill.patch +++ /dev/null @@ -1,261 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -218,7 +218,9 @@ struct wpa_driver_nl80211_data { - int if_removed; - int if_disabled; - int ignore_if_down_event; -+#ifdef CONFIG_RFKILL - struct rfkill_data *rfkill; -+#endif - struct wpa_driver_capa capa; - int has_capability; - -@@ -2828,7 +2830,7 @@ static int wpa_driver_nl80211_init_nl(st - return 0; - } - -- -+#ifdef CONFIG_RFKILL - static void wpa_driver_nl80211_rfkill_blocked(void *ctx) - { - wpa_printf(MSG_DEBUG, "nl80211: RFKILL blocked"); -@@ -2851,6 +2853,7 @@ static void wpa_driver_nl80211_rfkill_un - } - /* rtnetlink ifup handler will report interface as enabled */ - } -+#endif /* CONFIG_RFKILL */ - - - static void nl80211_get_phy_name(struct wpa_driver_nl80211_data *drv) -@@ -2979,7 +2982,9 @@ static void * wpa_driver_nl80211_init(vo - void *global_priv) - { - struct wpa_driver_nl80211_data *drv; -+#ifdef CONFIG_RFKILL - struct rfkill_config *rcfg; -+#endif - struct i802_bss *bss; - - if (global_priv == NULL) -@@ -3013,6 +3018,7 @@ static void * wpa_driver_nl80211_init(vo - - nl80211_get_phy_name(drv); - -+#ifdef CONFIG_RFKILL - rcfg = os_zalloc(sizeof(*rcfg)); - if (rcfg == NULL) - goto failed; -@@ -3025,6 +3031,7 @@ static void * wpa_driver_nl80211_init(vo - wpa_printf(MSG_DEBUG, "nl80211: RFKILL status not available"); - os_free(rcfg); - } -+#endif /* CONFIG_RFKILL */ - - if (wpa_driver_nl80211_finish_drv_init(drv)) - goto failed; -@@ -3311,10 +3318,12 @@ static void nl80211_mgmt_unsubscribe(str - } - - -+#ifdef CONFIG_RFKILL - static void wpa_driver_nl80211_send_rfkill(void *eloop_ctx, void *timeout_ctx) - { - wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); - } -+#endif /* CONFIG_RFKILL */ - - static int - wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv, -@@ -3335,13 +3344,16 @@ wpa_driver_nl80211_finish_drv_init_sta(s - } - - if (linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1)) { -+#ifdef CONFIG_RFKILL - if (rfkill_is_blocked(drv->rfkill)) { - wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable " - "interface '%s' due to rfkill", - bss->ifname); - drv->if_disabled = 1; - *send_rfkill_event = 1; -- } else { -+ } else -+#endif -+ { - wpa_printf(MSG_ERROR, "nl80211: Could not set " - "interface '%s' UP", bss->ifname); - return -1; -@@ -3372,8 +3384,10 @@ wpa_driver_nl80211_finish_drv_init(struc - return -1; - - if (send_rfkill_event) { -+#ifdef CONFIG_RFKILL - eloop_register_timeout(0, 0, wpa_driver_nl80211_send_rfkill, - drv, drv->ctx); -+#endif - } - - return 0; -@@ -3460,7 +3474,9 @@ static void wpa_driver_nl80211_deinit(vo - - netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, 0, - IF_OPER_UP); -+#ifdef CONFIG_RFKILL - rfkill_deinit(drv->rfkill); -+#endif - - eloop_cancel_timeout(wpa_driver_nl80211_scan_timeout, drv, drv->ctx); - ---- a/src/drivers/driver_wext.c -+++ b/src/drivers/driver_wext.c -@@ -742,7 +742,7 @@ static void wpa_driver_wext_event_rtm_de - } - } - -- -+#ifdef CONFIG_RFKILL - static void wpa_driver_wext_rfkill_blocked(void *ctx) - { - wpa_printf(MSG_DEBUG, "WEXT: RFKILL blocked"); -@@ -764,7 +764,7 @@ static void wpa_driver_wext_rfkill_unblo - } - /* rtnetlink ifup handler will report interface as enabled */ - } -- -+#endif /* CONFIG_RFKILL */ - - static void wext_get_phy_name(struct wpa_driver_wext_data *drv) - { -@@ -810,7 +810,9 @@ void * wpa_driver_wext_init(void *ctx, c - { - struct wpa_driver_wext_data *drv; - struct netlink_config *cfg; -+#ifdef CONFIG_RFKILL - struct rfkill_config *rcfg; -+#endif - char path[128]; - struct stat buf; - -@@ -845,6 +847,7 @@ void * wpa_driver_wext_init(void *ctx, c - goto err2; - } - -+#ifdef CONFIG_RFKILL - rcfg = os_zalloc(sizeof(*rcfg)); - if (rcfg == NULL) - goto err3; -@@ -857,6 +860,7 @@ void * wpa_driver_wext_init(void *ctx, c - wpa_printf(MSG_DEBUG, "WEXT: RFKILL status not available"); - os_free(rcfg); - } -+#endif /* CONFIG_RFKILL */ - - drv->mlme_sock = -1; - -@@ -874,7 +878,9 @@ void * wpa_driver_wext_init(void *ctx, c - return drv; - - err3: -+#ifdef CONFIG_RFKILL - rfkill_deinit(drv->rfkill); -+#endif - netlink_deinit(drv->netlink); - err2: - close(drv->ioctl_sock); -@@ -884,10 +890,12 @@ err1: - } - - -+#ifdef CONFIG_RFKILL - static void wpa_driver_wext_send_rfkill(void *eloop_ctx, void *timeout_ctx) - { - wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); - } -+#endif /* CONFIG_RFKILL */ - - - static int wpa_driver_wext_finish_drv_init(struct wpa_driver_wext_data *drv) -@@ -895,13 +903,16 @@ static int wpa_driver_wext_finish_drv_in - int send_rfkill_event = 0; - - if (linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 1) < 0) { -+#ifdef CONFIG_RFKILL - if (rfkill_is_blocked(drv->rfkill)) { - wpa_printf(MSG_DEBUG, "WEXT: Could not yet enable " - "interface '%s' due to rfkill", - drv->ifname); - drv->if_disabled = 1; - send_rfkill_event = 1; -- } else { -+ } else -+#endif -+ { - wpa_printf(MSG_ERROR, "WEXT: Could not set " - "interface '%s' UP", drv->ifname); - return -1; -@@ -949,8 +960,10 @@ static int wpa_driver_wext_finish_drv_in - 1, IF_OPER_DORMANT); - - if (send_rfkill_event) { -+#ifdef CONFIG_RFKILL - eloop_register_timeout(0, 0, wpa_driver_wext_send_rfkill, - drv, drv->ctx); -+#endif - } - - return 0; -@@ -980,7 +993,9 @@ void wpa_driver_wext_deinit(void *priv) - - netlink_send_oper_ifla(drv->netlink, drv->ifindex, 0, IF_OPER_UP); - netlink_deinit(drv->netlink); -+#ifdef CONFIG_RFKILL - rfkill_deinit(drv->rfkill); -+#endif - - if (drv->mlme_sock >= 0) - eloop_unregister_read_sock(drv->mlme_sock); ---- a/src/drivers/drivers.mak -+++ b/src/drivers/drivers.mak -@@ -25,7 +25,6 @@ NEED_SME=y - NEED_AP_MLME=y - NEED_NETLINK=y - NEED_LINUX_IOCTL=y --NEED_RFKILL=y - - ifdef CONFIG_LIBNL32 - DRV_LIBS += -lnl-3 -@@ -101,7 +100,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT - CONFIG_WIRELESS_EXTENSION=y - NEED_NETLINK=y - NEED_LINUX_IOCTL=y --NEED_RFKILL=y - endif - - ifdef CONFIG_DRIVER_NDIS -@@ -127,7 +125,6 @@ endif - ifdef CONFIG_WIRELESS_EXTENSION - DRV_WPA_CFLAGS += -DCONFIG_WIRELESS_EXTENSION - DRV_WPA_OBJS += ../src/drivers/driver_wext.o --NEED_RFKILL=y - endif - - ifdef NEED_NETLINK -@@ -140,6 +137,7 @@ endif - - ifdef NEED_RFKILL - DRV_OBJS += ../src/drivers/rfkill.o -+DRV_WPA_CFLAGS += -DCONFIG_RFKILL - endif - - ifdef CONFIG_VLAN_NETLINK ---- a/src/drivers/driver_wext.h -+++ b/src/drivers/driver_wext.h -@@ -22,7 +22,9 @@ struct wpa_driver_wext_data { - int ifindex2; - int if_removed; - int if_disabled; -+#ifdef CONFIG_RFKILL - struct rfkill_data *rfkill; -+#endif - u8 *assoc_req_ies; - size_t assoc_req_ies_len; - u8 *assoc_resp_ies; diff --git a/package/hostapd/patches/450-reload_freq_change.patch b/package/hostapd/patches/450-reload_freq_change.patch deleted file mode 100644 index f11593fcd5..0000000000 --- a/package/hostapd/patches/450-reload_freq_change.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/src/ap/hostapd.c -+++ b/src/ap/hostapd.c -@@ -140,6 +140,20 @@ int hostapd_reload_config(struct hostapd - oldconf = hapd->iconf; - iface->conf = newconf; - -+ hostapd_select_hw_mode(iface); -+ iface->freq = hostapd_hw_get_freq(hapd, newconf->channel); -+ -+ if (hostapd_set_freq(hapd, newconf->hw_mode, iface->freq, -+ newconf->channel, -+ newconf->ieee80211n, -+ newconf->secondary_channel)) { -+ wpa_printf(MSG_ERROR, "Could not set channel for " -+ "kernel driver"); -+ } -+ -+ if (iface->current_mode) -+ hostapd_prepare_rates(iface, iface->current_mode); -+ - for (j = 0; j < iface->num_bss; j++) { - hapd = iface->bss[j]; - hapd->iconf = newconf; diff --git a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch b/package/hostapd/patches/451-nl80211_del_beacon_bss.patch deleted file mode 100644 index 801b78b124..0000000000 --- a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -3394,16 +3394,18 @@ wpa_driver_nl80211_finish_drv_init(struc - } - - --static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv) -+static int wpa_driver_nl80211_del_bss_beacon(struct i802_bss *bss) - { -+ struct wpa_driver_nl80211_data *drv = bss->drv; - struct nl_msg *msg; - -+ bss->beacon_set = 0; - msg = nlmsg_alloc(); - if (!msg) - return -ENOMEM; - - nl80211_cmd(drv, msg, 0, NL80211_CMD_DEL_BEACON); -- NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex); -+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, bss->ifindex); - - return send_and_recv_msgs(drv, msg, NULL, NULL); - nla_put_failure: -@@ -3411,6 +3413,21 @@ static int wpa_driver_nl80211_del_beacon - return -ENOBUFS; - } - -+static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv) -+{ -+ struct i802_bss *bss; -+ -+ for (bss = &drv->first_bss; bss; bss = bss->next) -+ wpa_driver_nl80211_del_bss_beacon(bss); -+ -+ return 0; -+} -+ -+static int wpa_driver_nl80211_stop_ap(void *priv) -+{ -+ struct i802_bss *bss = priv; -+ return wpa_driver_nl80211_del_beacon(bss->drv); -+} - - /** - * wpa_driver_nl80211_deinit - Deinitialize nl80211 driver interface -@@ -9238,4 +9255,5 @@ const struct wpa_driver_ops wpa_driver_n - .send_tdls_mgmt = nl80211_send_tdls_mgmt, - .tdls_oper = nl80211_tdls_oper, - #endif /* CONFIG_TDLS */ -+ .stop_ap = wpa_driver_nl80211_stop_ap, - }; ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -2053,6 +2053,9 @@ struct wpa_driver_ops { - */ - int (*probe_req_report)(void *priv, int report); - -+ -+ int (*stop_ap)(void *priv); -+ - /** - * deinit_ap - Deinitialize AP mode - * @priv: Private driver interface data diff --git a/package/hostapd/patches/452-ctrl_iface_reload.patch b/package/hostapd/patches/452-ctrl_iface_reload.patch deleted file mode 100644 index 81dcfedde5..0000000000 --- a/package/hostapd/patches/452-ctrl_iface_reload.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -33,6 +33,7 @@ - #include "wps/wps.h" - #include "config_file.h" - #include "ctrl_iface.h" -+#include "config_file.h" - - - struct wpa_ctrl_dst { -@@ -43,6 +44,7 @@ struct wpa_ctrl_dst { - int errors; - }; - -+static char *reload_opts = NULL; - - static void hostapd_ctrl_iface_send(struct hostapd_data *hapd, int level, - const char *buf, size_t len); -@@ -152,6 +154,68 @@ static int hostapd_ctrl_iface_new_sta(st - return 0; - } - -+static int hostapd_ctrl_iface_set_down(struct hostapd_data *hapd) -+{ -+ if (hapd->driver->stop_ap) -+ hapd->driver->stop_ap(hapd->drv_priv); -+ return 0; -+} -+ -+static char *get_option(char *opt, char *str) -+{ -+ int len = strlen(str); -+ -+ if (!strncmp(opt, str, len)) -+ return opt + len; -+ else -+ return NULL; -+} -+ -+static struct hostapd_config *hostapd_ctrl_iface_config_read(const char *fname) -+{ -+ struct hostapd_config *conf; -+ char *opt, *val; -+ -+ conf = hostapd_config_read(fname); -+ if (!conf) -+ return NULL; -+ -+ for (opt = strtok(reload_opts, " "); -+ opt; -+ opt = strtok(NULL, " ")) { -+ -+ if ((val = get_option(opt, "channel="))) -+ conf->channel = atoi(val); -+ else if ((val = get_option(opt, "ht_capab="))) -+ conf->ht_capab = atoi(val); -+ else if ((val = get_option(opt, "ht_capab_mask="))) -+ conf->ht_capab &= atoi(val); -+ else if ((val = get_option(opt, "sec_chan="))) -+ conf->secondary_channel = atoi(val); -+ else if ((val = get_option(opt, "hw_mode="))) -+ conf->hw_mode = atoi(val); -+ else if ((val = get_option(opt, "ieee80211n="))) -+ conf->ieee80211n = atoi(val); -+ else -+ break; -+ } -+ -+ return conf; -+} -+ -+static int hostapd_ctrl_iface_update(struct hostapd_data *hapd, char *txt) -+{ -+ struct hostapd_config * (*config_read_cb)(const char *config_fname); -+ struct hostapd_iface *iface = hapd->iface; -+ -+ config_read_cb = iface->interfaces->config_read_cb; -+ iface->interfaces->config_read_cb = hostapd_ctrl_iface_config_read; -+ reload_opts = txt; -+ -+ hostapd_reload_config(iface); -+ -+ iface->interfaces->config_read_cb = config_read_cb; -+} - - #ifdef CONFIG_IEEE80211W - #ifdef NEED_AP_MLME -@@ -864,6 +928,10 @@ static void hostapd_ctrl_iface_receive(i - reply_len += res; - } - #endif /* CONFIG_NO_RADIUS */ -+ } else if (os_strcmp(buf, "DOWN") == 0) { -+ hostapd_ctrl_iface_set_down(hapd); -+ } else if (os_strncmp(buf, "UPDATE ", 7) == 0) { -+ hostapd_ctrl_iface_update(hapd, buf + 7); - } else if (os_strcmp(buf, "STA-FIRST") == 0) { - reply_len = hostapd_ctrl_iface_sta_first(hapd, reply, - reply_size); diff --git a/package/hostapd/patches/453-ap_sta_support.patch b/package/hostapd/patches/453-ap_sta_support.patch deleted file mode 100644 index 4b6c0f1646..0000000000 --- a/package/hostapd/patches/453-ap_sta_support.patch +++ /dev/null @@ -1,221 +0,0 @@ ---- a/wpa_supplicant/wpa_supplicant_i.h -+++ b/wpa_supplicant/wpa_supplicant_i.h -@@ -95,6 +95,8 @@ struct wpa_interface { - * receiving of EAPOL frames from an additional interface. - */ - const char *bridge_ifname; -+ -+ const char *hostapd_ctrl; - }; - - /** -@@ -294,6 +296,8 @@ struct wpa_supplicant { - #endif /* CONFIG_CTRL_IFACE_DBUS_NEW */ - char bridge_ifname[16]; - -+ struct wpa_ctrl *hostapd; -+ - char *confname; - struct wpa_config *conf; - int countermeasures; ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -13,6 +13,10 @@ PKG_CONFIG ?= pkg-config - CFLAGS += -I../src - CFLAGS += -I../src/utils - -+ifdef MULTICALL -+CFLAGS += -DMULTICALL -+endif -+ - -include .config - -include $(if $(MULTICALL),../hostapd/.config) - -@@ -76,6 +80,10 @@ OBJS_c = wpa_cli.o ../src/common/wpa_ctr - OBJS_c += ../src/utils/wpa_debug.o - OBJS_c += ../src/utils/common.o - -+ifdef MULTICALL -+OBJS += ../src/common/wpa_ctrl.o -+endif -+ - ifndef CONFIG_OS - ifdef CONFIG_NATIVE_WINDOWS - CONFIG_OS=win32 ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -107,6 +107,55 @@ extern int wpa_debug_show_keys; - extern int wpa_debug_timestamp; - extern struct wpa_driver_ops *wpa_drivers[]; - -+#ifdef MULTICALL -+static int hostapd_stop(struct wpa_supplicant *wpa_s) -+{ -+ const char *cmd = "DOWN"; -+ char buf[256]; -+ int len = sizeof(buf); -+ -+ if (wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL) < 0) { -+ wpa_printf(MSG_ERROR, "\nFailed to stop hostapd AP interfaces\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+static int hostapd_reload(struct wpa_supplicant *wpa_s, struct wpa_bss *bss) -+{ -+ char *cmd = NULL; -+ char buf[256]; -+ int len = sizeof(buf); -+ int channel, hw_mode; -+ int ret; -+ -+ if (!bss) -+ return; -+ -+ if (bss->freq < 4000) { -+ hw_mode = HOSTAPD_MODE_IEEE80211G; -+ channel = (bss->freq - 2407) / 5; -+ } else { -+ hw_mode = HOSTAPD_MODE_IEEE80211A; -+ channel = (bss->freq - 5000) / 5; -+ } -+ -+ if (asprintf(&cmd, "UPDATE channel=%d sec_chan=0 hw_mode=%d ieee80211n=%d", -+ channel, hw_mode, !!bss->ht_capab) < 0) { -+ return -1; -+ } -+ -+ ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL); -+ free(cmd); -+ -+ if (ret < 0) { -+ wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n"); -+ return -1; -+ } -+ return 0; -+} -+#endif -+ - /* Configure default/group WEP keys for static WEP */ - int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid) - { -@@ -672,8 +721,16 @@ void wpa_supplicant_set_state(struct wpa - #endif /* CONFIG_P2P */ - - sme_sched_obss_scan(wpa_s, 1); -+#ifdef MULTICALL -+ if (wpa_s->hostapd) -+ hostapd_reload(wpa_s, wpa_s->current_bss); -+#endif - } else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING || - state == WPA_ASSOCIATED) { -+#ifdef MULTICALL -+ if (wpa_s->hostapd) -+ hostapd_stop(wpa_s); -+#endif - wpa_s->new_connection = 1; - wpa_drv_set_operstate(wpa_s, 0); - #ifndef IEEE8021X_EAPOL -@@ -2727,6 +2784,21 @@ static int wpa_supplicant_init_iface(str - os_strlcpy(wpa_s->bridge_ifname, iface->bridge_ifname, - sizeof(wpa_s->bridge_ifname)); - } -+#ifdef MULTICALL -+ if (iface->hostapd_ctrl) { -+ char *cmd = "DOWN"; -+ char buf[256]; -+ int len = sizeof(buf); -+ -+ wpa_s->hostapd = wpa_ctrl_open(iface->hostapd_ctrl); -+ if (!wpa_s->hostapd) { -+ wpa_printf(MSG_ERROR, "\nFailed to connect to hostapd\n"); -+ return -1; -+ } -+ if (hostapd_stop(wpa_s) < 0) -+ return -1; -+ } -+#endif - - /* RSNA Supplicant Key Management - INITIALIZE */ - eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE); ---- a/wpa_supplicant/bss.c -+++ b/wpa_supplicant/bss.c -@@ -11,6 +11,7 @@ - #include "utils/common.h" - #include "utils/eloop.h" - #include "common/ieee802_11_defs.h" -+#include "common/ieee802_11_common.h" - #include "drivers/driver.h" - #include "wpa_supplicant_i.h" - #include "config.h" -@@ -139,6 +140,8 @@ struct wpa_bss * wpa_bss_get(struct wpa_ - - static void wpa_bss_copy_res(struct wpa_bss *dst, struct wpa_scan_res *src) - { -+ struct ieee80211_ht_capabilities *capab; -+ struct ieee802_11_elems elems; - os_time_t usec; - - dst->flags = src->flags; -@@ -151,6 +154,12 @@ static void wpa_bss_copy_res(struct wpa_ - dst->level = src->level; - dst->tsf = src->tsf; - -+ memset(&elems, 0, sizeof(elems)); -+ ieee802_11_parse_elems((u8 *) (src + 1), src->ie_len, &elems, 0); -+ capab = (struct ieee80211_ht_capabilities *) elems.ht_capabilities; -+ if (capab) -+ dst->ht_capab = le_to_host16(capab->ht_capabilities_info); -+ - os_get_time(&dst->last_update); - dst->last_update.sec -= src->age / 1000; - usec = (src->age % 1000) * 1000; ---- a/wpa_supplicant/bss.h -+++ b/wpa_supplicant/bss.h -@@ -72,6 +72,7 @@ struct wpa_bss { - u8 bssid[ETH_ALEN]; - u8 hessid[ETH_ALEN]; - u8 ssid[32]; -+ u16 ht_capab; - size_t ssid_len; - int freq; - u16 beacon_int; ---- a/wpa_supplicant/main.c -+++ b/wpa_supplicant/main.c -@@ -25,7 +25,7 @@ static void usage(void) - "usage:\n" - " wpa_supplicant [-BddhKLqqstuvW] [-P] " - "[-g] \\\n" -- " -i -c [-C] [-D] " -+ " -i -c [-C] [-D] [-H]" - "[-p] \\\n" - " [-b] [-f] [-e] " - "\\\n" -@@ -67,6 +67,7 @@ static void usage(void) - #endif /* CONFIG_DEBUG_LINUX_TRACING */ - printf(" -t = include timestamp in debug messages\n" - " -h = show this help text\n" -+ " -H = connect to a hostapd instance to manage state changes\n" - " -L = show license (BSD)\n" - " -o = override driver parameter for new interfaces\n" - " -O = override ctrl_interface parameter for new interfaces\n" -@@ -155,7 +156,7 @@ int main(int argc, char *argv[]) - - for (;;) { - c = getopt(argc, argv, -- "b:Bc:C:D:de:f:g:hi:KLNo:O:p:P:qsTtuvW"); -+ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW"); - if (c < 0) - break; - switch (c) { -@@ -199,6 +200,9 @@ int main(int argc, char *argv[]) - usage(); - exitcode = 0; - goto out; -+ case 'H': -+ iface->hostapd_ctrl = optarg; -+ break; - case 'i': - iface->ifname = optarg; - break; diff --git a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch b/package/hostapd/patches/460-disable_ctrl_iface_mib.patch deleted file mode 100644 index 2f03179a0a..0000000000 --- a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch +++ /dev/null @@ -1,168 +0,0 @@ ---- a/hostapd/Makefile -+++ b/hostapd/Makefile -@@ -135,6 +135,9 @@ endif - ifdef CONFIG_NO_CTRL_IFACE - CFLAGS += -DCONFIG_NO_CTRL_IFACE - else -+ifdef CONFIG_CTRL_IFACE_MIB -+CFLAGS += -DCONFIG_CTRL_IFACE_MIB -+endif - OBJS += ctrl_iface.o - OBJS += ../src/ap/ctrl_iface_ap.o - endif ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -899,6 +899,7 @@ static void hostapd_ctrl_iface_receive(i - } else if (os_strncmp(buf, "RELOG", 5) == 0) { - if (wpa_debug_reopen_file() < 0) - reply_len = -1; -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "MIB") == 0) { - reply_len = ieee802_11_get_mib(hapd, reply, reply_size); - if (reply_len >= 0) { -@@ -928,10 +929,12 @@ static void hostapd_ctrl_iface_receive(i - reply_len += res; - } - #endif /* CONFIG_NO_RADIUS */ -+#endif - } else if (os_strcmp(buf, "DOWN") == 0) { - hostapd_ctrl_iface_set_down(hapd); - } else if (os_strncmp(buf, "UPDATE ", 7) == 0) { - hostapd_ctrl_iface_update(hapd, buf + 7); -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "STA-FIRST") == 0) { - reply_len = hostapd_ctrl_iface_sta_first(hapd, reply, - reply_size); -@@ -941,6 +944,7 @@ static void hostapd_ctrl_iface_receive(i - } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { - reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply, - reply_size); -+#endif - } else if (os_strcmp(buf, "ATTACH") == 0) { - if (hostapd_ctrl_iface_attach(hapd, &from, fromlen)) - reply_len = -1; ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -751,6 +751,9 @@ ifdef CONFIG_IEEE80211N - OBJS += ../src/ap/ieee802_11_ht.o - endif - ifdef CONFIG_CTRL_IFACE -+ifdef CONFIG_CTRL_IFACE_MIB -+CFLAGS += -DCONFIG_CTRL_IFACE_MIB -+endif - OBJS += ../src/ap/ctrl_iface_ap.o - endif - ---- a/wpa_supplicant/ctrl_iface.c -+++ b/wpa_supplicant/ctrl_iface.c -@@ -4382,6 +4382,7 @@ char * wpa_supplicant_ctrl_iface_process - reply_len = -1; - } else if (os_strncmp(buf, "NOTE ", 5) == 0) { - wpa_printf(MSG_INFO, "NOTE: %s", buf + 5); -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "MIB") == 0) { - reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size); - if (reply_len >= 0) { -@@ -4393,6 +4394,7 @@ char * wpa_supplicant_ctrl_iface_process - else - reply_len += res; - } -+#endif - } else if (os_strncmp(buf, "STATUS", 6) == 0) { - reply_len = wpa_supplicant_ctrl_iface_status( - wpa_s, buf + 6, reply, reply_size); -@@ -4792,6 +4794,7 @@ char * wpa_supplicant_ctrl_iface_process - reply_len = wpa_supplicant_ctrl_iface_bss( - wpa_s, buf + 4, reply, reply_size); - #ifdef CONFIG_AP -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "STA-FIRST") == 0) { - reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size); - } else if (os_strncmp(buf, "STA ", 4) == 0) { -@@ -4800,6 +4803,7 @@ char * wpa_supplicant_ctrl_iface_process - } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { - reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply, - reply_size); -+#endif - } else if (os_strncmp(buf, "DEAUTHENTICATE ", 15) == 0) { - if (ap_ctrl_iface_sta_deauthenticate(wpa_s, buf + 15)) - reply_len = -1; ---- a/src/ap/ctrl_iface_ap.c -+++ b/src/ap/ctrl_iface_ap.c -@@ -20,6 +20,7 @@ - #include "ctrl_iface_ap.h" - #include "ap_drv_ops.h" - -+#ifdef CONFIG_CTRL_IFACE_MIB - - static int hostapd_ctrl_iface_sta_mib(struct hostapd_data *hapd, - struct sta_info *sta, -@@ -103,6 +104,7 @@ int hostapd_ctrl_iface_sta_next(struct h - return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen); - } - -+#endif - - #ifdef CONFIG_P2P_MANAGER - static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype, -@@ -269,3 +271,4 @@ int hostapd_ctrl_iface_disassociate(stru - - return 0; - } -+ ---- a/src/ap/ieee802_1x.c -+++ b/src/ap/ieee802_1x.c -@@ -2034,6 +2034,7 @@ static const char * bool_txt(Boolean boo - return bool ? "TRUE" : "FALSE"; - } - -+#ifdef CONFIG_CTRL_IFACE_MIB - - int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen) - { -@@ -2186,6 +2187,7 @@ int ieee802_1x_get_mib_sta(struct hostap - return len; - } - -+#endif - - static void ieee802_1x_finished(struct hostapd_data *hapd, - struct sta_info *sta, int success) ---- a/src/ap/wpa_auth.c -+++ b/src/ap/wpa_auth.c -@@ -2729,6 +2729,7 @@ static const char * wpa_bool_txt(int boo - return bool ? "TRUE" : "FALSE"; - } - -+#ifdef CONFIG_CTRL_IFACE_MIB - - #define RSN_SUITE "%02x-%02x-%02x-%d" - #define RSN_SUITE_ARG(s) \ -@@ -2873,7 +2874,7 @@ int wpa_get_mib_sta(struct wpa_state_mac - - return len; - } -- -+#endif - - void wpa_auth_countermeasures_start(struct wpa_authenticator *wpa_auth) - { ---- a/src/rsn_supp/wpa.c -+++ b/src/rsn_supp/wpa.c -@@ -1844,6 +1844,8 @@ static u32 wpa_key_mgmt_suite(struct wpa - } - - -+#ifdef CONFIG_CTRL_IFACE_MIB -+ - #define RSN_SUITE "%02x-%02x-%02x-%d" - #define RSN_SUITE_ARG(s) \ - ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff -@@ -1927,6 +1929,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch - - return (int) len; - } -+#endif - #endif /* CONFIG_CTRL_IFACE */ - - diff --git a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch b/package/hostapd/patches/470-wpa_ie_cap_workaround.patch deleted file mode 100644 index 00a32229d4..0000000000 --- a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/src/common/wpa_common.c -+++ b/src/common/wpa_common.c -@@ -959,6 +959,31 @@ const char * wpa_key_mgmt_txt(int key_mg - } - - -+static void wpa_fixup_wpa_ie_rsn(u8 *assoc_ie, const u8 *wpa_msg_ie, -+ size_t rsn_ie_len) -+{ -+ int pos, count; -+ -+ pos = sizeof(struct rsn_ie_hdr) + RSN_SELECTOR_LEN; -+ if (rsn_ie_len < pos + 2) -+ return; -+ -+ count = WPA_GET_LE16(wpa_msg_ie + pos); -+ pos += 2 + count * RSN_SELECTOR_LEN; -+ if (rsn_ie_len < pos + 2) -+ return; -+ -+ count = WPA_GET_LE16(wpa_msg_ie + pos); -+ pos += 2 + count * RSN_SELECTOR_LEN; -+ if (rsn_ie_len < pos + 2) -+ return; -+ -+ if (!assoc_ie[pos] && !assoc_ie[pos + 1] && -+ (wpa_msg_ie[pos] || wpa_msg_ie[pos + 1])) -+ memcpy(&assoc_ie[pos], &wpa_msg_ie[pos], 2); -+} -+ -+ - int wpa_compare_rsn_ie(int ft_initial_assoc, - const u8 *ie1, size_t ie1len, - const u8 *ie2, size_t ie2len) -@@ -966,8 +991,19 @@ int wpa_compare_rsn_ie(int ft_initial_as - if (ie1 == NULL || ie2 == NULL) - return -1; - -- if (ie1len == ie2len && os_memcmp(ie1, ie2, ie1len) == 0) -- return 0; /* identical IEs */ -+ if (ie1len == ie2len) { -+ u8 *ie_tmp; -+ -+ if (os_memcmp(ie1, ie2, ie1len) == 0) -+ return 0; /* identical IEs */ -+ -+ ie_tmp = alloca(ie1len); -+ memcpy(ie_tmp, ie1, ie1len); -+ wpa_fixup_wpa_ie_rsn(ie_tmp, ie2, ie1len); -+ -+ if (os_memcmp(ie_tmp, ie2, ie1len) == 0) -+ return 0; /* only mismatch in RSN capabilties */ -+ } - - #ifdef CONFIG_IEEE80211R - if (ft_initial_assoc) { diff --git a/package/hostapd/patches/480-terminate_on_setup_failure.patch b/package/hostapd/patches/480-terminate_on_setup_failure.patch deleted file mode 100644 index 6168a5cfc3..0000000000 --- a/package/hostapd/patches/480-terminate_on_setup_failure.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/src/ap/hostapd.c -+++ b/src/ap/hostapd.c -@@ -886,11 +886,8 @@ int hostapd_setup_interface_complete(str - size_t j; - u8 *prev_addr; - -- if (err) { -- wpa_printf(MSG_ERROR, "Interface initialization failed"); -- eloop_terminate(); -- return -1; -- } -+ if (err) -+ goto error; - - wpa_printf(MSG_DEBUG, "Completing interface initialization"); - if (hapd->iconf->channel) { -@@ -906,7 +903,7 @@ int hostapd_setup_interface_complete(str - hapd->iconf->secondary_channel)) { - wpa_printf(MSG_ERROR, "Could not set channel for " - "kernel driver"); -- return -1; -+ goto error; - } - } - -@@ -917,7 +914,7 @@ int hostapd_setup_interface_complete(str - hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211, - HOSTAPD_LEVEL_WARNING, - "Failed to prepare rates table."); -- return -1; -+ goto error; - } - } - -@@ -925,14 +922,14 @@ int hostapd_setup_interface_complete(str - hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) { - wpa_printf(MSG_ERROR, "Could not set RTS threshold for " - "kernel driver"); -- return -1; -+ goto error; - } - - if (hapd->iconf->fragm_threshold > -1 && - hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) { - wpa_printf(MSG_ERROR, "Could not set fragmentation threshold " - "for kernel driver"); -- return -1; -+ goto error; - } - - prev_addr = hapd->own_addr; -@@ -942,7 +939,7 @@ int hostapd_setup_interface_complete(str - if (j) - os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN); - if (hostapd_setup_bss(hapd, j == 0)) -- return -1; -+ goto error; - if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0) - prev_addr = hapd->own_addr; - } -@@ -954,7 +951,7 @@ int hostapd_setup_interface_complete(str - if (hostapd_driver_commit(hapd) < 0) { - wpa_printf(MSG_ERROR, "%s: Failed to commit driver " - "configuration", __func__); -- return -1; -+ goto error; - } - - /* -@@ -975,6 +972,11 @@ int hostapd_setup_interface_complete(str - iface->bss[0]->conf->iface); - - return 0; -+ -+error: -+ wpa_printf(MSG_ERROR, "Interface initialization failed"); -+ eloop_terminate(); -+ return -1; - } - - diff --git a/package/hostapd/patches/500-random_pool_add_kernel.patch b/package/hostapd/patches/500-random_pool_add_kernel.patch deleted file mode 100644 index e54e881d8e..0000000000 --- a/package/hostapd/patches/500-random_pool_add_kernel.patch +++ /dev/null @@ -1,168 +0,0 @@ ---- a/src/crypto/random.c -+++ b/src/crypto/random.c -@@ -33,6 +33,8 @@ - #include "sha1.h" - #include "random.h" - -+#define RANDOM_STAMPFILE "/var/run/.random_available" -+ - #define POOL_WORDS 32 - #define POOL_WORDS_MASK (POOL_WORDS - 1) - #define POOL_TAP1 26 -@@ -43,6 +45,8 @@ - #define EXTRACT_LEN 16 - #define MIN_READY_MARK 2 - -+#ifndef CONFIG_NO_RANDOM_POOL -+ - static u32 pool[POOL_WORDS]; - static unsigned int input_rotate = 0; - static unsigned int pool_pos = 0; -@@ -123,7 +127,7 @@ static void random_extract(u8 *out) - } - - --void random_add_randomness(const void *buf, size_t len) -+static void random_pool_add_randomness(const void *buf, size_t len) - { - struct os_time t; - static unsigned int count = 0; -@@ -213,16 +217,22 @@ int random_get_bytes(void *buf, size_t l - int random_pool_ready(void) - { - #ifdef __linux__ -+ struct stat st; - int fd; - ssize_t res; - -+ if (stat(RANDOM_STAMPFILE, &st) == 0) -+ return 1; -+ - /* - * Make sure that there is reasonable entropy available before allowing - * some key derivation operations to proceed. - */ - -- if (dummy_key_avail == sizeof(dummy_key)) -+ if (dummy_key_avail == sizeof(dummy_key)) { -+ random_mark_pool_ready(); - return 1; /* Already initialized - good to continue */ -+ } - - /* - * Try to fetch some more data from the kernel high quality -@@ -257,6 +267,7 @@ int random_pool_ready(void) - if (dummy_key_avail == sizeof(dummy_key)) { - if (own_pool_ready < MIN_READY_MARK) - own_pool_ready = MIN_READY_MARK; -+ random_mark_pool_ready(); - random_write_entropy(); - return 1; - } -@@ -269,6 +280,7 @@ int random_pool_ready(void) - total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) { - wpa_printf(MSG_INFO, "random: Allow operation to proceed " - "based on internal entropy"); -+ random_mark_pool_ready(); - return 1; - } - -@@ -284,10 +296,16 @@ int random_pool_ready(void) - - void random_mark_pool_ready(void) - { -+ int fd; -+ - own_pool_ready++; - wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be " - "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK); - random_write_entropy(); -+ -+ fd = open(RANDOM_STAMPFILE, O_CREAT | O_WRONLY | O_EXCL | O_NOFOLLOW, 0600); -+ if (fd >= 0) -+ close(fd); - } - - -@@ -444,3 +462,22 @@ void random_deinit(void) - os_free(random_entropy_file); - random_entropy_file = NULL; - } -+ -+#endif /* CONFIG_NO_RANDOM_POOL */ -+ -+ -+void random_add_randomness(const void *buf, size_t len) -+{ -+#ifdef __linux__ -+ int fd; -+ -+ fd = open("/dev/random", O_RDWR); -+ if (fd >= 0) { -+ write(fd, buf, len); -+ close(fd); -+ } -+#endif -+#ifndef CONFIG_NO_RANDOM_POOL -+ random_pool_add_randomness(buf, len); -+#endif -+} ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -1217,9 +1217,8 @@ endif - - ifdef CONFIG_NO_RANDOM_POOL - CFLAGS += -DCONFIG_NO_RANDOM_POOL --else --OBJS += ../src/crypto/random.o - endif -+OBJS += ../src/crypto/random.o - - ifdef CONFIG_CTRL_IFACE - ifeq ($(CONFIG_CTRL_IFACE), y) ---- a/wpa_supplicant/Android.mk -+++ b/wpa_supplicant/Android.mk -@@ -1161,9 +1161,8 @@ endif - - ifdef CONFIG_NO_RANDOM_POOL - L_CFLAGS += -DCONFIG_NO_RANDOM_POOL --else --OBJS += src/crypto/random.c - endif -+OBJS += src/crypto/random.c - - ifdef CONFIG_CTRL_IFACE - ifeq ($(CONFIG_CTRL_IFACE), y) ---- a/hostapd/Android.mk -+++ b/hostapd/Android.mk -@@ -748,11 +748,11 @@ endif - ifdef CONFIG_NO_RANDOM_POOL - L_CFLAGS += -DCONFIG_NO_RANDOM_POOL - else --OBJS += src/crypto/random.c --HOBJS += src/crypto/random.c - HOBJS += $(SHA1OBJS) - HOBJS += src/crypto/md5.c - endif -+OBJS += src/crypto/random.c -+HOBJS += src/crypto/random.c - - ifdef CONFIG_RADIUS_SERVER - L_CFLAGS += -DRADIUS_SERVER ---- a/hostapd/Makefile -+++ b/hostapd/Makefile -@@ -755,12 +755,12 @@ endif - ifdef CONFIG_NO_RANDOM_POOL - CFLAGS += -DCONFIG_NO_RANDOM_POOL - else --OBJS += ../src/crypto/random.o --HOBJS += ../src/crypto/random.o - HOBJS += ../src/utils/eloop.o - HOBJS += $(SHA1OBJS) - HOBJS += ../src/crypto/md5.o - endif -+OBJS += ../src/crypto/random.o -+HOBJS += ../src/crypto/random.o - - ifdef CONFIG_RADIUS_SERVER - CFLAGS += -DRADIUS_SERVER diff --git a/package/hostapd/patches/510-bring_down_interface.patch b/package/hostapd/patches/510-bring_down_interface.patch deleted file mode 100644 index 7481eb152a..0000000000 --- a/package/hostapd/patches/510-bring_down_interface.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -7144,8 +7144,6 @@ static int wpa_driver_nl80211_set_mode(s - ret = nl80211_set_mode(drv, drv->ifindex, nlmode); - if (ret == -EACCES) - break; -- res = linux_set_iface_flags(drv->global->ioctl_sock, -- bss->ifname, 1); - if (res && !ret) - ret = -1; - else if (ret != -EBUSY) -@@ -7161,6 +7159,7 @@ static int wpa_driver_nl80211_set_mode(s - "interface is down"); - drv->nlmode = nlmode; - drv->ignore_if_down_event = 1; -+ linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1); - } - - done: diff --git a/package/hostapd/patches/520-fix_wps_pin_crash.patch b/package/hostapd/patches/520-fix_wps_pin_crash.patch deleted file mode 100644 index 29d154cef3..0000000000 --- a/package/hostapd/patches/520-fix_wps_pin_crash.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -450,6 +450,9 @@ static int hostapd_ctrl_iface_wps_ap_pin - char *pos; - const char *pin_txt; - -+ if (!hapd->wps) -+ return -1; -+ - pos = os_strchr(txt, ' '); - if (pos) - *pos++ = '\0'; diff --git a/package/hostapd/patches/530-wps_single_auth_enc_type.patch b/package/hostapd/patches/530-wps_single_auth_enc_type.patch deleted file mode 100644 index f05ea35cf9..0000000000 --- a/package/hostapd/patches/530-wps_single_auth_enc_type.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/src/ap/wps_hostapd.c -+++ b/src/ap/wps_hostapd.c -@@ -873,11 +873,9 @@ int hostapd_init_wps(struct hostapd_data - - if (conf->rsn_pairwise & WPA_CIPHER_CCMP) - wps->encr_types |= WPS_ENCR_AES; -- if (conf->rsn_pairwise & WPA_CIPHER_TKIP) -+ else if (conf->rsn_pairwise & WPA_CIPHER_TKIP) - wps->encr_types |= WPS_ENCR_TKIP; -- } -- -- if (conf->wpa & WPA_PROTO_WPA) { -+ } else if (conf->wpa & WPA_PROTO_WPA) { - if (conf->wpa_key_mgmt & WPA_KEY_MGMT_PSK) - wps->auth_types |= WPS_AUTH_WPAPSK; - if (conf->wpa_key_mgmt & WPA_KEY_MGMT_IEEE8021X) -@@ -885,7 +883,7 @@ int hostapd_init_wps(struct hostapd_data - - if (conf->wpa_pairwise & WPA_CIPHER_CCMP) - wps->encr_types |= WPS_ENCR_AES; -- if (conf->wpa_pairwise & WPA_CIPHER_TKIP) -+ else if (conf->wpa_pairwise & WPA_CIPHER_TKIP) - wps->encr_types |= WPS_ENCR_TKIP; - } - diff --git a/package/hostapd/patches/540-dynamic_20_40_mhz.patch b/package/hostapd/patches/540-dynamic_20_40_mhz.patch deleted file mode 100644 index d58358c083..0000000000 --- a/package/hostapd/patches/540-dynamic_20_40_mhz.patch +++ /dev/null @@ -1,202 +0,0 @@ ---- a/hostapd/config_file.c -+++ b/hostapd/config_file.c -@@ -2495,6 +2495,10 @@ static int hostapd_config_fill(struct ho - "ht_capab", line); - errors++; - } -+ } else if (os_strcmp(buf, "dynamic_ht40") == 0) { -+ conf->dynamic_ht40 = atoi(pos); -+ if (conf->dynamic_ht40 == 1) -+ conf->dynamic_ht40 = 1500; - } else if (os_strcmp(buf, "require_ht") == 0) { - conf->require_ht = atoi(pos); - #endif /* CONFIG_IEEE80211N */ ---- a/src/ap/ap_config.h -+++ b/src/ap/ap_config.h -@@ -501,6 +501,7 @@ struct hostapd_config { - int ieee80211n; - int secondary_channel; - int require_ht; -+ int dynamic_ht40; - u32 vht_capab; - int ieee80211ac; - int require_vht; ---- a/src/ap/hostapd.c -+++ b/src/ap/hostapd.c -@@ -22,6 +22,7 @@ - #include "beacon.h" - #include "iapp.h" - #include "ieee802_1x.h" -+#include "ieee802_11.h" - #include "ieee802_11_auth.h" - #include "vlan_init.h" - #include "wpa_auth.h" -@@ -323,6 +324,7 @@ static void hostapd_cleanup_iface_pre(st - - static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface) - { -+ hostapd_deinit_ht(iface); - hostapd_free_hw_features(iface->hw_features, iface->num_hw_features); - iface->hw_features = NULL; - os_free(iface->current_rates); ---- a/src/ap/hostapd.h -+++ b/src/ap/hostapd.h -@@ -251,6 +251,9 @@ struct hostapd_iface { - /* Overlapping BSS information */ - int olbc_ht; - -+ int force_20mhz; -+ struct os_time last_20mhz_trigger; -+ - u16 ht_op_mode; - void (*scan_cb)(struct hostapd_iface *iface); - }; ---- a/src/ap/ieee802_11.c -+++ b/src/ap/ieee802_11.c -@@ -1220,6 +1220,9 @@ static void handle_beacon(struct hostapd - sizeof(mgmt->u.beacon)), &elems, - 0); - -+ if (!elems.ht_capabilities) -+ hostapd_trigger_20mhz(hapd->iface); -+ - ap_list_process_beacon(hapd->iface, mgmt, &elems, fi); - } - ---- a/src/ap/ieee802_11.h -+++ b/src/ap/ieee802_11.h -@@ -78,4 +78,17 @@ int hostapd_update_time_adv(struct hosta - void hostapd_client_poll_ok(struct hostapd_data *hapd, const u8 *addr); - u8 * hostapd_eid_bss_max_idle_period(struct hostapd_data *hapd, u8 *eid); - -+#ifdef CONFIG_IEEE80211N -+void hostapd_trigger_20mhz(struct hostapd_iface *iface); -+void hostapd_deinit_ht(struct hostapd_iface *iface); -+ -+#else -+static inline void hostapd_deinit_ht(struct hostapd_iface *iface) -+{ -+} -+static inline void hostapd_trigger_20mhz(struct hostapd_iface *iface) -+{ -+} -+#endif /* CONFIG_IEEE80211N */ -+ - #endif /* IEEE802_11_H */ ---- a/src/ap/ieee802_11_ht.c -+++ b/src/ap/ieee802_11_ht.c -@@ -20,9 +20,11 @@ - #include "drivers/driver.h" - #include "hostapd.h" - #include "ap_config.h" -+#include "ap_drv_ops.h" - #include "sta_info.h" - #include "beacon.h" - #include "ieee802_11.h" -+#include "utils/eloop.h" - - - u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid) -@@ -70,12 +72,15 @@ u8 * hostapd_eid_ht_operation(struct hos - - oper->control_chan = hapd->iconf->channel; - oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode); -- if (hapd->iconf->secondary_channel == 1) -- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | -- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -- if (hapd->iconf->secondary_channel == -1) -- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | -- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -+ -+ if (!hapd->iface->force_20mhz) { -+ if (hapd->iconf->secondary_channel == 1) -+ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | -+ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -+ if (hapd->iconf->secondary_channel == -1) -+ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | -+ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -+ } - - pos += sizeof(*oper); - -@@ -271,3 +276,80 @@ void hostapd_get_ht_capab(struct hostapd - - neg_ht_cap->ht_capabilities_info = host_to_le16(cap); - } -+ -+static void hostapd_set_force_20mhz(struct hostapd_iface *iface); -+ -+static void hostapd_restore_40mhz(void *eloop_data, void *user_ctx) -+{ -+ struct hostapd_iface *iface = eloop_data; -+ struct os_time time; -+ int timeout; -+ -+ if (!iface->last_20mhz_trigger.sec) -+ return; -+ -+ os_get_time(&time); -+ timeout = iface->last_20mhz_trigger.sec + iface->conf->dynamic_ht40 - -+ time.sec; -+ -+ if (timeout > 0) { -+ eloop_register_timeout(timeout, 0, hostapd_restore_40mhz, -+ iface, NULL); -+ return; -+ } -+ -+ iface->last_20mhz_trigger.sec = 0; -+ iface->last_20mhz_trigger.usec = 0; -+ -+ iface->force_20mhz = 0; -+ hostapd_set_force_20mhz(iface); -+} -+ -+static void hostapd_set_force_20mhz(struct hostapd_iface *iface) -+{ -+ int secondary_channel; -+ int i; -+ -+ ieee802_11_set_beacons(iface); -+ -+ for (i = 0; i < iface->num_bss; i++) { -+ struct hostapd_data *hapd = iface->bss[i]; -+ -+ if (iface->force_20mhz) -+ secondary_channel = 0; -+ else -+ secondary_channel = hapd->iconf->secondary_channel; -+ -+ if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq, -+ hapd->iconf->channel, -+ hapd->iconf->ieee80211n, -+ secondary_channel)) { -+ wpa_printf(MSG_ERROR, "Could not set channel for " -+ "kernel driver"); -+ } -+ } -+} -+ -+void hostapd_deinit_ht(struct hostapd_iface *iface) -+{ -+ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); -+} -+ -+void hostapd_trigger_20mhz(struct hostapd_iface *iface) -+{ -+ if (!iface->conf->dynamic_ht40) -+ return; -+ -+ if (!iface->force_20mhz) { -+ iface->force_20mhz = 1; -+ hostapd_set_force_20mhz(iface); -+ } -+ -+ if (!iface->last_20mhz_trigger.sec) { -+ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); -+ eloop_register_timeout(iface->conf->dynamic_ht40, 0, -+ hostapd_restore_40mhz, iface, NULL); -+ } -+ -+ os_get_time(&iface->last_20mhz_trigger); -+} diff --git a/package/hostapd/patches/550-limit_debug_messages.patch b/package/hostapd/patches/550-limit_debug_messages.patch deleted file mode 100644 index 659e980112..0000000000 --- a/package/hostapd/patches/550-limit_debug_messages.patch +++ /dev/null @@ -1,213 +0,0 @@ ---- a/src/utils/wpa_debug.c -+++ b/src/utils/wpa_debug.c -@@ -201,7 +201,7 @@ void wpa_debug_close_linux_tracing(void) - * - * Note: New line '\n' is added to the end of the text when printing to stdout. - */ --void wpa_printf(int level, const char *fmt, ...) -+void _wpa_printf(int level, const char *fmt, ...) - { - va_list ap; - -@@ -248,8 +248,8 @@ void wpa_printf(int level, const char *f - } - - --static void _wpa_hexdump(int level, const char *title, const u8 *buf, -- size_t len, int show) -+void _wpa_hexdump(int level, const char *title, const u8 *buf, -+ size_t len, int show) - { - size_t i; - -@@ -375,20 +375,9 @@ static void _wpa_hexdump(int level, cons - #endif /* CONFIG_ANDROID_LOG */ - } - --void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len) --{ -- _wpa_hexdump(level, title, buf, len, 1); --} -- -- --void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len) --{ -- _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys); --} - -- --static void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -- size_t len, int show) -+void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -+ size_t len, int show) - { - size_t i, llen; - const u8 *pos = buf; -@@ -495,19 +484,6 @@ static void _wpa_hexdump_ascii(int level - } - - --void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, size_t len) --{ -- _wpa_hexdump_ascii(level, title, buf, len, 1); --} -- -- --void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, -- size_t len) --{ -- _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys); --} -- -- - #ifdef CONFIG_DEBUG_FILE - static char *last_path = NULL; - #endif /* CONFIG_DEBUG_FILE */ -@@ -591,7 +567,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_ - } - - --void wpa_msg(void *ctx, int level, const char *fmt, ...) -+void _wpa_msg(void *ctx, int level, const char *fmt, ...) - { - va_list ap; - char *buf; -@@ -625,7 +601,7 @@ void wpa_msg(void *ctx, int level, const - } - - --void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) -+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) - { - va_list ap; - char *buf; ---- a/src/utils/wpa_debug.h -+++ b/src/utils/wpa_debug.h -@@ -43,6 +43,17 @@ int wpa_debug_open_file(const char *path - int wpa_debug_reopen_file(void); - void wpa_debug_close_file(void); - -+/* internal */ -+void _wpa_hexdump(int level, const char *title, const u8 *buf, -+ size_t len, int show); -+void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -+ size_t len, int show); -+extern int wpa_debug_show_keys; -+ -+#ifndef CONFIG_MSG_MIN_PRIORITY -+#define CONFIG_MSG_MIN_PRIORITY 0 -+#endif -+ - /** - * wpa_debug_printf_timestamp - Print timestamp for debug output - * -@@ -63,9 +74,15 @@ void wpa_debug_print_timestamp(void); - * - * Note: New line '\n' is added to the end of the text when printing to stdout. - */ --void wpa_printf(int level, const char *fmt, ...) -+void _wpa_printf(int level, const char *fmt, ...) - PRINTF_FORMAT(2, 3); - -+#define wpa_printf(level, ...) \ -+ do { \ -+ if (level >= CONFIG_MSG_MIN_PRIORITY) \ -+ _wpa_printf(level, __VA_ARGS__); \ -+ } while(0) -+ - /** - * wpa_hexdump - conditional hex dump - * @level: priority level (MSG_*) of the message -@@ -77,7 +94,13 @@ PRINTF_FORMAT(2, 3); - * output may be directed to stdout, stderr, and/or syslog based on - * configuration. The contents of buf is printed out has hex dump. - */ --void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len); -+static inline void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump(level, title, buf, len, 1); -+} - - static inline void wpa_hexdump_buf(int level, const char *title, - const struct wpabuf *buf) -@@ -99,7 +122,13 @@ static inline void wpa_hexdump_buf(int l - * like wpa_hexdump(), but by default, does not include secret keys (passwords, - * etc.) in debug output. - */ --void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len); -+static inline void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys); -+} - - static inline void wpa_hexdump_buf_key(int level, const char *title, - const struct wpabuf *buf) -@@ -121,8 +150,14 @@ static inline void wpa_hexdump_buf_key(i - * the hex numbers and ASCII characters (for printable range) are shown. 16 - * bytes per line will be shown. - */ --void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -- size_t len); -+static inline void wpa_hexdump_ascii(int level, const char *title, -+ const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump_ascii(level, title, buf, len, 1); -+} - - /** - * wpa_hexdump_ascii_key - conditional hex dump, hide keys -@@ -138,8 +173,14 @@ void wpa_hexdump_ascii(int level, const - * bytes per line will be shown. This works like wpa_hexdump_ascii(), but by - * default, does not include secret keys (passwords, etc.) in debug output. - */ --void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, -- size_t len); -+static inline void wpa_hexdump_ascii_key(int level, const char *title, -+ const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys); -+} - - /* - * wpa_dbg() behaves like wpa_msg(), but it can be removed from build to reduce -@@ -172,7 +213,12 @@ void wpa_hexdump_ascii_key(int level, co - * - * Note: New line '\n' is added to the end of the text when printing to stdout. - */ --void wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4); -+void _wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4); -+#define wpa_msg(ctx, level, ...) \ -+ do { \ -+ if (level >= CONFIG_MSG_MIN_PRIORITY) \ -+ _wpa_msg(ctx, level, __VA_ARGS__); \ -+ } while(0) - - /** - * wpa_msg_ctrl - Conditional printf for ctrl_iface monitors -@@ -186,8 +232,13 @@ void wpa_msg(void *ctx, int level, const - * attached ctrl_iface monitors. In other words, it can be used for frequent - * events that do not need to be sent to syslog. - */ --void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) -+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) - PRINTF_FORMAT(3, 4); -+#define wpa_msg_ctrl(ctx, level, ...) \ -+ do { \ -+ if (level >= CONFIG_MSG_MIN_PRIORITY) \ -+ _wpa_msg_ctrl(ctx, level, __VA_ARGS__); \ -+ } while(0) - - typedef void (*wpa_msg_cb_func)(void *ctx, int level, const char *txt, - size_t len); diff --git a/package/hostapd/patches/560-indicate-features.patch b/package/hostapd/patches/560-indicate-features.patch deleted file mode 100644 index d01e18b862..0000000000 --- a/package/hostapd/patches/560-indicate-features.patch +++ /dev/null @@ -1,82 +0,0 @@ ---- a/hostapd/main.c -+++ b/hostapd/main.c -@@ -13,6 +13,7 @@ - - #include "utils/common.h" - #include "utils/eloop.h" -+#include "utils/build_features.h" - #include "crypto/random.h" - #include "crypto/tls.h" - #include "common/version.h" -@@ -560,7 +561,7 @@ int main(int argc, char *argv[]) - - wpa_supplicant_event = hostapd_wpa_event; - for (;;) { -- c = getopt(argc, argv, "Bde:f:hKP:tvg:"); -+ c = getopt(argc, argv, "Bde:f:hKP:tg:v::"); - if (c < 0) - break; - switch (c) { -@@ -592,6 +593,8 @@ int main(int argc, char *argv[]) - wpa_debug_timestamp++; - break; - case 'v': -+ if (optarg) -+ exit(!has_feature(optarg)); - show_version(); - exit(1); - break; ---- a/wpa_supplicant/main.c -+++ b/wpa_supplicant/main.c -@@ -12,6 +12,7 @@ - #endif /* __linux__ */ - - #include "common.h" -+#include "build_features.h" - #include "wpa_supplicant_i.h" - #include "driver_i.h" - -@@ -156,7 +157,7 @@ int main(int argc, char *argv[]) - - for (;;) { - c = getopt(argc, argv, -- "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW"); -+ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuv::W"); - if (c < 0) - break; - switch (c) { -@@ -248,8 +249,12 @@ int main(int argc, char *argv[]) - break; - #endif /* CONFIG_DBUS */ - case 'v': -- printf("%s\n", wpa_supplicant_version); -- exitcode = 0; -+ if (optarg) { -+ exitcode = !has_feature(optarg); -+ } else { -+ printf("%s\n", wpa_supplicant_version); -+ exitcode = 0; -+ } - goto out; - case 'W': - params.wait_for_monitor++; ---- /dev/null -+++ b/src/utils/build_features.h -@@ -0,0 +1,17 @@ -+#ifndef BUILD_FEATURES_H -+#define BUILD_FEATURES_H -+ -+static inline int has_feature(const char *feat) -+{ -+#ifdef IEEE8021X_EAPOL -+ if (!strcmp(feat, "eap")) -+ return 1; -+#endif -+#ifdef IEEE80211N -+ if (!strcmp(feat, "11n")) -+ return 1; -+#endif -+ return 0; -+} -+ -+#endif /* BUILD_FEATURES_H */ diff --git a/package/hostapd/patches/570-genl_connect_debug.patch b/package/hostapd/patches/570-genl_connect_debug.patch deleted file mode 100644 index 5f140489b0..0000000000 --- a/package/hostapd/patches/570-genl_connect_debug.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -127,7 +127,7 @@ static struct nl_handle * nl_create_hand - } - - if (genl_connect(handle)) { -- wpa_printf(MSG_ERROR, "nl80211: Failed to connect to generic " -+ wpa_printf(MSG_DEBUG, "nl80211: Failed to connect to generic " - "netlink (%s)", dbg); - nl80211_handle_destroy(handle); - return NULL; diff --git a/package/hostapd/patches/580-fix_bss_addr.patch b/package/hostapd/patches/580-fix_bss_addr.patch deleted file mode 100644 index 3a76668c14..0000000000 --- a/package/hostapd/patches/580-fix_bss_addr.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -7738,7 +7738,7 @@ static int i802_set_wds_sta(void *priv, - if (!if_nametoindex(name)) { - if (nl80211_create_iface(drv, name, - NL80211_IFTYPE_AP_VLAN, -- NULL, 1) < 0) -+ bss->addr, 1) < 0) - return -1; - if (bridge_ifname && - linux_br_add_if(drv->global->ioctl_sock, diff --git a/package/hostapd/patches/590-hostapd_cli_ifdef.patch b/package/hostapd/patches/590-hostapd_cli_ifdef.patch deleted file mode 100644 index 705cef13d5..0000000000 --- a/package/hostapd/patches/590-hostapd_cli_ifdef.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/hostapd/hostapd_cli.c -+++ b/hostapd/hostapd_cli.c -@@ -67,7 +67,6 @@ static const char *commands_help = - #ifdef CONFIG_IEEE80211W - " sa_query send SA Query to a station\n" - #endif /* CONFIG_IEEE80211W */ --#ifdef CONFIG_WPS - " wps_pin [timeout] [addr] add WPS Enrollee PIN\n" - " wps_check_pin verify PIN checksum\n" - " wps_pbc indicate button pushed to initiate PBC\n" -@@ -82,7 +81,6 @@ static const char *commands_help = - #endif /* CONFIG_WPS_NFC */ - " wps_ap_pin [params..] enable/disable AP PIN\n" - " wps_config configure AP\n" --#endif /* CONFIG_WPS */ - " get_config show current configuration\n" - " help show this usage help\n" - " interface [ifname] show interfaces/select interface\n" -@@ -343,7 +341,6 @@ static int hostapd_cli_cmd_sa_query(stru - #endif /* CONFIG_IEEE80211W */ - - --#ifdef CONFIG_WPS - static int hostapd_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc, - char *argv[]) - { -@@ -573,7 +570,6 @@ static int hostapd_cli_cmd_wps_config(st - ssid_hex, argv[1]); - return wpa_ctrl_command(ctrl, buf); - } --#endif /* CONFIG_WPS */ - - - static int hostapd_cli_cmd_ess_disassoc(struct wpa_ctrl *ctrl, int argc, -@@ -799,7 +795,6 @@ static struct hostapd_cli_cmd hostapd_cl - #ifdef CONFIG_IEEE80211W - { "sa_query", hostapd_cli_cmd_sa_query }, - #endif /* CONFIG_IEEE80211W */ --#ifdef CONFIG_WPS - { "wps_pin", hostapd_cli_cmd_wps_pin }, - { "wps_check_pin", hostapd_cli_cmd_wps_check_pin }, - { "wps_pbc", hostapd_cli_cmd_wps_pbc }, -@@ -814,7 +809,6 @@ static struct hostapd_cli_cmd hostapd_cl - #endif /* CONFIG_WPS_NFC */ - { "wps_ap_pin", hostapd_cli_cmd_wps_ap_pin }, - { "wps_config", hostapd_cli_cmd_wps_config }, --#endif /* CONFIG_WPS */ - { "ess_disassoc", hostapd_cli_cmd_ess_disassoc }, - { "get_config", hostapd_cli_cmd_get_config }, - { "help", hostapd_cli_cmd_help }, diff --git a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch b/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch deleted file mode 100644 index ac0d247d76..0000000000 --- a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch +++ /dev/null @@ -1,211 +0,0 @@ -From 4bb69d15477e0f2b00e166845341dc933de47c58 Mon Sep 17 00:00:00 2001 -From: Antonio Quartulli -Date: Sun, 3 Jun 2012 18:22:56 +0200 -Subject: [PATCHv2 601/602] wpa_supplicant: add new config params to be used - with the ibss join command - -Signed-hostap: Antonio Quartulli ---- - src/drivers/driver.h | 6 +++ - wpa_supplicant/config.c | 96 +++++++++++++++++++++++++++++++++++++++ - wpa_supplicant/config_ssid.h | 6 +++ - wpa_supplicant/wpa_supplicant.c | 23 +++++++--- - 4 files changed, 124 insertions(+), 7 deletions(-) - ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -19,6 +19,7 @@ - - #define WPA_SUPPLICANT_DRIVER_VERSION 4 - -+#include "drivers/nl80211_copy.h" - #include "common/defs.h" - - #define HOSTAPD_CHAN_DISABLED 0x00000001 -@@ -351,6 +352,11 @@ struct wpa_driver_associate_params { - */ - int freq; - -+ int beacon_interval; -+ int fixed_freq; -+ unsigned char rates[NL80211_MAX_SUPP_RATES]; -+ int mcast_rate; -+ - /** - * bg_scan_period - Background scan period in seconds, 0 to disable - * background scan, or -1 to indicate no change to default driver ---- a/wpa_supplicant/config.c -+++ b/wpa_supplicant/config.c -@@ -14,6 +14,7 @@ - #include "rsn_supp/wpa.h" - #include "eap_peer/eap.h" - #include "p2p/p2p.h" -+#include "drivers/nl80211_copy.h" - #include "config.h" - - -@@ -1463,6 +1464,97 @@ static char * wpa_config_write_p2p_clien - - #endif /* CONFIG_P2P */ - -+static int wpa_config_parse_mcast_rate(const struct parse_data *data, -+ struct wpa_ssid *ssid, int line, -+ const char *value) -+{ -+ ssid->mcast_rate = (int)(strtod(value, NULL) * 10); -+ -+ return 0; -+} -+ -+#ifndef NO_CONFIG_WRITE -+static char * wpa_config_write_mcast_rate(const struct parse_data *data, -+ struct wpa_ssid *ssid) -+{ -+ char *value; -+ int res; -+ -+ if (!ssid->mcast_rate == 0) -+ return NULL; -+ -+ value = os_malloc(6); /* longest: 300.0 */ -+ if (value == NULL) -+ return NULL; -+ res = os_snprintf(value, 5, "%.1f", (double)ssid->mcast_rate / 10); -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ return value; -+} -+#endif /* NO_CONFIG_WRITE */ -+ -+static int wpa_config_parse_rates(const struct parse_data *data, -+ struct wpa_ssid *ssid, int line, -+ const char *value) -+{ -+ int i; -+ char *pos, *r, *sptr, *end; -+ double rate; -+ -+ pos = (char *)value; -+ r = strtok_r(pos, ",", &sptr); -+ i = 0; -+ while (pos && i < NL80211_MAX_SUPP_RATES) { -+ rate = 0.0; -+ if (r) -+ rate = strtod(r, &end); -+ ssid->rates[i] = rate * 2; -+ if (*end != '\0' || rate * 2 != ssid->rates[i]) -+ return 1; -+ -+ i++; -+ r = strtok_r(NULL, ",", &sptr); -+ } -+ -+ return 0; -+} -+ -+#ifndef NO_CONFIG_WRITE -+static char * wpa_config_write_rates(const struct parse_data *data, -+ struct wpa_ssid *ssid) -+{ -+ char *value, *pos; -+ int res, i; -+ -+ if (ssid->rates[0] <= 0) -+ return NULL; -+ -+ value = os_malloc(6 * NL80211_MAX_SUPP_RATES + 1); -+ if (value == NULL) -+ return NULL; -+ pos = value; -+ for (i = 0; i < NL80211_MAX_SUPP_RATES - 1; i++) { -+ res = os_snprintf(pos, 6, "%.1f,", (double)ssid->rates[i] / 2); -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ pos += res; -+ } -+ res = os_snprintf(pos, 6, "%.1f", -+ (double)ssid->rates[NL80211_MAX_SUPP_RATES - 1] / 2); -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ -+ value[6 * NL80211_MAX_SUPP_RATES] = '\0'; -+ return value; -+} -+#endif /* NO_CONFIG_WRITE */ -+ - /* Helper macros for network block parser */ - - #ifdef OFFSET -@@ -1638,6 +1730,10 @@ static const struct parse_data ssid_fiel - #endif /* CONFIG_HT_OVERRIDES */ - { INT(ap_max_inactivity) }, - { INT(dtim_period) }, -+ { INT_RANGE(fixed_freq, 0, 1) }, -+ { INT_RANGE(beacon_interval, 0, 1000) }, -+ { FUNC(rates) }, -+ { FUNC(mcast_rate) }, - }; - - #undef OFFSET ---- a/wpa_supplicant/config_ssid.h -+++ b/wpa_supplicant/config_ssid.h -@@ -11,6 +11,7 @@ - - #include "common/defs.h" - #include "eap_peer/eap_config.h" -+#include "drivers/nl80211_copy.h" - - #define MAX_SSID_LEN 32 - -@@ -529,6 +530,11 @@ struct wpa_ssid { - * disabled_until - Network block disabled until this time if non-zero - */ - struct os_time disabled_until; -+ -+ int fixed_freq; -+ int beacon_interval; -+ unsigned char rates[NL80211_MAX_SUPP_RATES]; -+ double mcast_rate; - }; - - #endif /* CONFIG_SSID_H */ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1561,15 +1561,24 @@ void wpa_supplicant_associate(struct wpa - params.ssid_len = ssid->ssid_len; - } - -- if (ssid->mode == WPAS_MODE_IBSS && ssid->bssid_set && -- wpa_s->conf->ap_scan == 2) { -- params.bssid = ssid->bssid; -- params.fixed_bssid = 1; -+ if (ssid->mode == WPAS_MODE_IBSS) { -+ if (ssid->bssid_set && wpa_s->conf->ap_scan == 2) { -+ params.bssid = ssid->bssid; -+ params.fixed_bssid = 1; -+ } -+ if (ssid->frequency > 0 && params.freq == 0) -+ /* Initial channel for IBSS */ -+ params.freq = ssid->frequency; -+ params.fixed_freq = ssid->fixed_freq; -+ params.beacon_interval = ssid->beacon_interval; -+ i = 0; -+ while (i < NL80211_MAX_SUPP_RATES) { -+ params.rates[i] = ssid->rates[i]; -+ i++; -+ } -+ params.mcast_rate = ssid->mcast_rate; - } - -- if (ssid->mode == WPAS_MODE_IBSS && ssid->frequency > 0 && -- params.freq == 0) -- params.freq = ssid->frequency; /* Initial channel for IBSS */ - params.wpa_ie = wpa_ie; - params.wpa_ie_len = wpa_ie_len; - params.pairwise_suite = cipher_pairwise; diff --git a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch b/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch deleted file mode 100644 index c426a0bb2d..0000000000 --- a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch +++ /dev/null @@ -1,59 +0,0 @@ -From ffc4445958a3ed4064f2e1bf73fa478a61c5cf7b Mon Sep 17 00:00:00 2001 -From: Antonio Quartulli -Date: Sun, 3 Jun 2012 18:42:25 +0200 -Subject: [PATCHv2 602/602] driver_nl80211: use new parameters during ibss join - -Signed-hostap: Antonio Quartulli ---- - src/drivers/driver_nl80211.c | 33 ++++++++++++++++++++++++++++++++- - 1 file changed, 32 insertions(+), 1 deletion(-) - ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -6587,7 +6587,7 @@ static int wpa_driver_nl80211_ibss(struc - struct wpa_driver_associate_params *params) - { - struct nl_msg *msg; -- int ret = -1; -+ int ret = -1, i; - int count = 0; - - wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex); -@@ -6620,6 +6620,37 @@ retry: - wpa_printf(MSG_DEBUG, " * freq=%d", params->freq); - NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, params->freq); - -+ if (params->fixed_freq) { -+ wpa_printf(MSG_DEBUG, " * fixed_freq"); -+ NLA_PUT_FLAG(msg, NL80211_ATTR_FREQ_FIXED); -+ } -+ -+ if (params->beacon_interval > 0) { -+ wpa_printf(MSG_DEBUG, " * beacon_interval=%d", -+ params->beacon_interval); -+ NLA_PUT_U32(msg, NL80211_ATTR_BEACON_INTERVAL, -+ params->beacon_interval); -+ } -+ -+ if (params->rates[0] > 0) { -+ wpa_printf(MSG_DEBUG, " * basic_rates:"); -+ i = 0; -+ while (i < NL80211_MAX_SUPP_RATES && -+ params->rates[i] > 0) { -+ wpa_printf(MSG_DEBUG, " %.1f", -+ (double)params->rates[i] / 2); -+ i++; -+ } -+ NLA_PUT(msg, NL80211_ATTR_BSS_BASIC_RATES, i, -+ params->rates); -+ } -+ -+ if (params->mcast_rate > 0) { -+ wpa_printf(MSG_DEBUG, " * mcast_rates=%.1f", -+ (double)params->mcast_rate / 10); -+ NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate); -+ } -+ - ret = nl80211_set_conn_keys(params, msg); - if (ret) - goto nla_put_failure; diff --git a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch b/package/hostapd/patches/604-wpa_s-support-htmode-param.patch deleted file mode 100644 index 44931f2f3b..0000000000 --- a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch +++ /dev/null @@ -1,156 +0,0 @@ -From b9329c5dfeed7d5c55d2117d8dfe326fc40c8fb1 Mon Sep 17 00:00:00 2001 -From: Antonio Quartulli -Date: Tue, 3 Jul 2012 00:36:24 +0200 -Subject: [PATCH] wpa_s: support htmode param - -possible values are HT20, HT40-, HT40+ and NOHT - -Signed-off-by: Antonio Quartulli ---- - src/drivers/driver.h | 2 ++ - src/drivers/driver_nl80211.c | 16 ++++++++++ - wpa_supplicant/config.c | 66 +++++++++++++++++++++++++++++++++++++++ - wpa_supplicant/config_ssid.h | 2 ++ - wpa_supplicant/wpa_supplicant.c | 2 ++ - 5 files changed, 88 insertions(+) - ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -356,6 +356,8 @@ struct wpa_driver_associate_params { - int fixed_freq; - unsigned char rates[NL80211_MAX_SUPP_RATES]; - int mcast_rate; -+ int ht_set; -+ unsigned int htmode; - - /** - * bg_scan_period - Background scan period in seconds, 0 to disable ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -6651,6 +6651,22 @@ retry: - NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate); - } - -+ if (params->ht_set) { -+ switch(params->htmode) { -+ case NL80211_CHAN_HT20: -+ wpa_printf(MSG_DEBUG, " * ht=HT20"); -+ break; -+ case NL80211_CHAN_HT40PLUS: -+ wpa_printf(MSG_DEBUG, " * ht=HT40+"); -+ break; -+ case NL80211_CHAN_HT40MINUS: -+ wpa_printf(MSG_DEBUG, " * ht=HT40-"); -+ break; -+ } -+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, -+ params->htmode); -+ } -+ - ret = nl80211_set_conn_keys(params, msg); - if (ret) - goto nla_put_failure; ---- a/wpa_supplicant/config.c -+++ b/wpa_supplicant/config.c -@@ -1495,6 +1495,71 @@ static char * wpa_config_write_mcast_rat - } - #endif /* NO_CONFIG_WRITE */ - -+static int wpa_config_parse_htmode(const struct parse_data *data, -+ struct wpa_ssid *ssid, int line, -+ const char *value) -+{ -+ int i; -+ static const struct { -+ const char *name; -+ unsigned int val; -+ } htmap[] = { -+ { .name = "HT20", .val = NL80211_CHAN_HT20, }, -+ { .name = "HT40+", .val = NL80211_CHAN_HT40PLUS, }, -+ { .name = "HT40-", .val = NL80211_CHAN_HT40MINUS, }, -+ { .name = "NOHT", .val = NL80211_CHAN_NO_HT, }, -+ }; -+ ssid->ht_set = 0;; -+ for (i = 0; i < 4; i++) { -+ if (strcasecmp(htmap[i].name, value) == 0) { -+ ssid->htmode = htmap[i].val; -+ ssid->ht_set = 1; -+ break; -+ } -+ } -+ -+ return 0; -+} -+ -+#ifndef NO_CONFIG_WRITE -+static char * wpa_config_write_htmode(const struct parse_data *data, -+ struct wpa_ssid *ssid) -+{ -+ char *value; -+ int res; -+ -+ value = os_malloc(6); /* longest: HT40+ */ -+ if (value == NULL) -+ return NULL; -+ -+ switch(ssid->htmode) { -+ case NL80211_CHAN_HT20: -+ res = os_snprintf(value, 4, "HT20"); -+ break; -+ case NL80211_CHAN_HT40PLUS: -+ res = os_snprintf(value, 5, "HT40+"); -+ break; -+ case NL80211_CHAN_HT40MINUS: -+ res = os_snprintf(value, 5, "HT40-"); -+ break; -+ case NL80211_CHAN_NO_HT: -+ res = os_snprintf(value, 4, "NOHT"); -+ break; -+ default: -+ os_free(value); -+ return NULL; -+ } -+ -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ -+ return value; -+} -+#endif /* NO_CONFIG_WRITE */ -+ -+ - static int wpa_config_parse_rates(const struct parse_data *data, - struct wpa_ssid *ssid, int line, - const char *value) -@@ -1734,6 +1799,7 @@ static const struct parse_data ssid_fiel - { INT_RANGE(beacon_interval, 0, 1000) }, - { FUNC(rates) }, - { FUNC(mcast_rate) }, -+ { FUNC(htmode) }, - }; - - #undef OFFSET ---- a/wpa_supplicant/config_ssid.h -+++ b/wpa_supplicant/config_ssid.h -@@ -535,6 +535,8 @@ struct wpa_ssid { - int beacon_interval; - unsigned char rates[NL80211_MAX_SUPP_RATES]; - double mcast_rate; -+ int ht_set; -+ unsigned int htmode; - }; - - #endif /* CONFIG_SSID_H */ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1577,6 +1577,8 @@ void wpa_supplicant_associate(struct wpa - i++; - } - params.mcast_rate = ssid->mcast_rate; -+ params.ht_set = ssid->ht_set; -+ params.htmode = ssid->htmode; - } - - params.wpa_ie = wpa_ie; diff --git a/package/hostapd/patches/610-max_num_sta_probe.patch b/package/hostapd/patches/610-max_num_sta_probe.patch deleted file mode 100644 index e22348c896..0000000000 --- a/package/hostapd/patches/610-max_num_sta_probe.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/src/ap/beacon.c -+++ b/src/ap/beacon.c -@@ -413,6 +413,10 @@ void handle_probe_req(struct hostapd_dat - return; - } - -+ if (!sta && hapd->num_sta >= hapd->conf->max_num_sta) -+ wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " ignored," -+ " too many connected stations.", MAC2STR(mgmt->sa)); -+ - #ifdef CONFIG_INTERWORKING - if (elems.interworking && elems.interworking_len >= 1) { - u8 ant = elems.interworking[0] & 0x0f; -- cgit v1.2.3