From 4a77a060ab6219f830390cd53c2817b621f39760 Mon Sep 17 00:00:00 2001 From: Yanase Yuki Date: Wed, 29 Jan 2020 19:27:25 +0900 Subject: ipq40xx: add support for Buffalo WTR-M2133HP Buffalo WTR-M2133HP is a Tri-Band router based on IPQ4019. Specification ------------- - SoC: Qualcomm IPQ4019 - RAM: 512MiB - Flash Memory: NAND 128MiB (MXIC MX30LF1G18AC) - Wi-Fi: Qualcomm IPQ4019 (2.4GHz, 1ch - 13ch) - Wi-Fi: Qualcomm IPQ4019 (5GHz, 36ch - 64ch) - Wi-Fi: Qualcomm QCA9984 (2T2R, 5GHz, 100ch - 140ch) - Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN) - LED: 4x white LED, 4x orange LED, 1x blue LED - USB: 1x USB 3.0 port - Input: 2x tactile switch, 2x slide switch (2x SP3T) - Serial console: 115200bps, pinheader JP5 on PCB - Power: DC 12V 2A Flash instruction ----------------- 1. Set up a TFTP server (IP address: 192.168.11.10) 2. Rename "initramfs-fit-uImage.itb" to "WTR-M2133HP-initramfs.uImage" and put it into the TFTP server directory. 3. Connect the TFTP server and WTR-M2133HP. 4. Hold down the AOSS button, then power on the router. 5. After booting OpenWrt initramfs image, connect to the router by SSH. 6. Transfer "squashfs-nand-factory.ubi" to the router. 7. Execute the following commands. # ubidetach -p /dev/mtd15 # ubiformat /dev/mtd15 -f /tmp/openwrt-ipq40xx-generic-buffalo_wtr-m2133hp-squashfs-nand-factory.ubi # fw_setenv bootcmd bootipq 8. Perform reboot. Recover to stock firmware ------------------------- 1. Execute the following command. # fw_setenv bootcmd bootbf 2. Reboot and wait several minutes. Signed-off-by: Yanase Yuki --- package/firmware/ipq-wifi/Makefile | 2 ++ .../firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca4019 | Bin 0 -> 24332 bytes .../firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca9984 | Bin 0 -> 12172 bytes 3 files changed, 2 insertions(+) create mode 100644 package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca4019 create mode 100644 package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca9984 (limited to 'package/firmware') diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 4868b75d16..ee7b194601 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -28,6 +28,7 @@ ALLWIFIBOARDS:= \ 8dev_habanero-dvk \ aruba_ap-303 \ avm_fritzrepeater-1200 \ + buffalo_wtr-m2133hp \ cellc_rtl30vw \ dlink_dap2610 \ engenius_eap2200 \ @@ -101,6 +102,7 @@ endef $(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK)) $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303)) $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200)) +$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP)) $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200)) diff --git a/package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca4019 b/package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca4019 new file mode 100644 index 0000000000..8305ba0166 Binary files /dev/null and b/package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca4019 differ diff --git a/package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca9984 b/package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca9984 new file mode 100644 index 0000000000..656cb99cbb Binary files /dev/null and b/package/firmware/ipq-wifi/board-buffalo_wtr-m2133hp.qca9984 differ -- cgit v1.2.3