From 3a3d998c129c3316c188b1abd9b2d3b0fc82ab2e Mon Sep 17 00:00:00 2001 From: Tomasz Maciej Nowak Date: Tue, 25 Feb 2020 20:07:36 +0100 Subject: layerscape: resurrect support for FRDM-LS1012A MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak --- package/firmware/layerscape/ls-rcw/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'package/firmware') diff --git a/package/firmware/layerscape/ls-rcw/Makefile b/package/firmware/layerscape/ls-rcw/Makefile index 5bcbff5bc4..ddef58fa0b 100644 --- a/package/firmware/layerscape/ls-rcw/Makefile +++ b/package/firmware/layerscape/ls-rcw/Makefile @@ -28,6 +28,11 @@ define Package/layerscape-rcw/Config endef endef +define Package/layerscape-rcw/ls1012afrdm + TITLE:=NXP LS1012AFRDM RCW binary + CONFIG:=ls1012afrdm/N_SSNP_3305/rcw_800.bin +endef + define Package/layerscape-rcw/ls1012ardb TITLE:=NXP LS1012ARDB RCW binary CONFIG:=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin @@ -86,6 +91,7 @@ define Package/layerscape-rcw/Install endef RCWS := \ + ls1012afrdm \ ls1012ardb \ ls1012afrwy \ ls1043ardb \ -- cgit v1.2.3