From 15a14cf1665ef3d8b5c77cce69b52d131340e3b3 Mon Sep 17 00:00:00 2001 From: Yutang Jiang Date: Sat, 29 Oct 2016 00:18:23 +0800 Subject: layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang --- package/firmware/ppfe-firmware/Makefile | 86 +++++++++++++++++++++++++++++++++ package/firmware/rcw/Makefile | 10 +++- 2 files changed, 94 insertions(+), 2 deletions(-) create mode 100644 package/firmware/ppfe-firmware/Makefile (limited to 'package/firmware') diff --git a/package/firmware/ppfe-firmware/Makefile b/package/firmware/ppfe-firmware/Makefile new file mode 100644 index 0000000000..ee0305b6ff --- /dev/null +++ b/package/firmware/ppfe-firmware/Makefile @@ -0,0 +1,86 @@ +# +# Copyright (C) 2016 Jiang Yutang +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=ppfe +PKG_VERSION:=v1.0 +PKG_RELEASE:=1 + +PKG_SOURCE_PROTO:=git +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 +PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE_URL:=https://github.com/fsl-jyt/ppfe.git +PKG_SOURCE_VERSION:=b9bb5cc690c0aab2592eb9d443ef55cc9dff8557 +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) + +PKG_LICENSE:=GPL-2.0 GPL-2.0+ +PKG_LICENSE_FILES:=Licenses/README + +include $(INCLUDE_DIR)/package.mk + +define ppfe/Default + TITLE:= + CONFIG:= +endef + +define ppfe/ls1012ardb + TITLE:=PPFE firmware $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012a Dev Board\ + (must enable CONFIG_NO_STRIP=y for avoid firmware be broke) + CONFIG:=ls1012a/Freescale-Binary-EULA ls1012a/ppfe_class_ls1012a.elf ls1012a/ppfe_tmu_ls1012a.elf +endef + +PPFES := \ + ls1012ardb + +define Package/ppfe/template +define Package/ppfe-$(1) + SECTION:=firmware + CATEGORY:=Firmware + DEPENDS:=@TARGET_layerscape + TITLE:=$(2) + URL:=https://github.com/fsl-jyt/ppfe.git + VARIANT:=$(1) + MAINTAINER:=Jiang Yutang +endef +endef + +define BuildPPFEPackage + $(eval $(ppfe/Default)) + $(eval $(ppfe/$(1))) + $(call Package/ppfe/template,$(1),$(TITLE)) +endef + +ifdef BUILD_VARIANT +$(eval $(call ppfe/$(BUILD_VARIANT))) +PPFE_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) +endif + +define Build/Compile +endef + +define Package/ppfe/install/default + $(INSTALL_DIR) $(1)/lib/firmware + $(foreach i,$(PPFE_CONFIG), \ + $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(i) $(1)/lib/firmware/ ;\ + ) +endef + +define Package/ppfe/install/template +define Package/ppfe-$(1)/install + $(call Package/ppfe/install/default,$$(1),$(2)) +endef +endef + +$(foreach p,$(PPFES), \ + $(eval $(call Package/ppfe/install/template,$(p),$(p))) \ +) + +$(foreach p,$(PPFES), \ + $(eval $(call BuildPPFEPackage,$(p))) \ + $(eval $(call BuildPackage,ppfe-$(p))) \ +) diff --git a/package/firmware/rcw/Makefile b/package/firmware/rcw/Makefile index 4b6d8c1350..a412fd9f74 100644 --- a/package/firmware/rcw/Makefile +++ b/package/firmware/rcw/Makefile @@ -16,7 +16,7 @@ PKG_SOURCE_PROTO:=git PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) PKG_SOURCE_URL:=https://github.com/fsl-jyt/rcw.git -PKG_SOURCE_VERSION:=4c74045c34375ee0cf6a9bbd57ef8f00a5a01fd6 +PKG_SOURCE_VERSION:=e101d1207f402c7b761990a3e6681fdae8f253e3 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) @@ -35,8 +35,14 @@ define rcw/ls1043ardb CONFIG=ls1043ardb-rcw.bin endef +define rcw/ls1012ardb + TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012ardb 64b/32b Dev Board + CONFIG=ls1012ardb-rcw.bin +endef + RCWS := \ - ls1043ardb + ls1043ardb \ + ls1012ardb define Package/rcw/template define Package/rcw-layerscape-$(1) -- cgit v1.2.3