From 6ffe8a473eedf6f4f472bb5e64a1e1775917f3c8 Mon Sep 17 00:00:00 2001 From: Kip Porterfield Date: Mon, 3 Aug 2020 14:07:51 +0000 Subject: kirkwood: add support for Seagate BlackArmor NAS220 The Seagate BlackArmor NAS220 is a consumer NAS with two internal drive bays. The stock OS runs RAID 1 over the disks via mdadm. Device specification: - SoC: Marvell 88F6192 800 MHz - RAM: 128 MB - Flash: 32 MB - 2 x internal SATA II drives - Ethernet: 10/100/1000 Mbps (single port, no switch) - WLAN: None - LED: Power, Status, Sata Activity - Key: Power, Reset - Serial: 10 pin header, (115200,8,N,1), 3.3V TTL 9|x - x|10 7|x - x|8 5|x - GND|6 3|x - RX|4 1|TX - x|2 front of case - USB ports: 2 x USB 2.0 Flash instruction: NOTE: this process uses a serial connection. It will upgrade the bootloader and reset the bootloader environment variables TFTP server setup - Setup PC with TFTP server set the PC IP to 10.4.50.5 as TFTP server - Copy these files to TFTP server location - u-boot.kwb - seagate_blackarmor-nas220-initramfs-uImage - seagate_blackarmor-nas220-squashfs-sysupgrade.bin - seagate_blackarmor-nas220-squashfs-factory.bin Seagate NAS setup - Connect LAN cable between PC and seagate device - Connect to serial to seagate device Install u-boot - Boot seagate device and stop in bootloader by pressing any key - run 'printenv' from u-boot and save the values - tftpboot 0x2000000 u-boot.kwb - nand erase.part uboot - nand write 0x2000000 0x0 ${filesize} - reset Update MAC address in u-boot env - Stop in u-boot by pressing any key - Get your MAC address from your saved printenv. Is also on chassis - setenv ethaddr - saveenv Option 1 (recommended) - Install OpenWrt via initramfs and sysupgrade - tftpboot 0x2000000 seagate_blackarmor-nas220-initramfs-uImage - bootm 0x2000000 - *OpenWrt should be running now, however it is not written to flash yet* - From the running instance of OpenWrt use Luci's "flash image" feature from the web site or use sysupgrade from the console to write seagate_blackarmor-nas220-squashfs-sysupgrade.bin to flash Option 2 - Install OpenWrt by flashing factory image from u-boot - nand erase.part ubi - tftpboot 0x2000000 seagate_blackarmor-nas220-squashfs-factory.bin - nand write 0x2000000 ubi ${filesize} - reset Signed-off-by: Kip Porterfield --- package/boot/uboot-kirkwood/Makefile | 6 +++++ .../patches/201-blackarmor-nas220.patch | 29 ++++++++++++++++++++++ 2 files changed, 35 insertions(+) create mode 100644 package/boot/uboot-kirkwood/patches/201-blackarmor-nas220.patch (limited to 'package/boot') diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile index e1493bf0e8..1ed1743e21 100644 --- a/package/boot/uboot-kirkwood/Makefile +++ b/package/boot/uboot-kirkwood/Makefile @@ -59,6 +59,11 @@ define U-Boot/l-50 BUILD_DEVICES:=checkpoint_l-50 endef +define U-Boot/nas220 + NAME:=Seagate Blackarmor NAS220 + BUILD_DEVICES:=seagate_blackarmor-nas220 +endef + define U-Boot/nsa310 NAME:=Zyxel NSA310 BUILD_DEVICES:=zyxel_nsa310b @@ -95,6 +100,7 @@ UBOOT_TARGETS := \ ib62x0 ib62x0_second_stage \ iconnect iconnect_second_stage \ l-50 \ + nas220 \ nsa310 \ nsa310s \ nsa325 \ diff --git a/package/boot/uboot-kirkwood/patches/201-blackarmor-nas220.patch b/package/boot/uboot-kirkwood/patches/201-blackarmor-nas220.patch new file mode 100644 index 0000000000..50de4e7b82 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/201-blackarmor-nas220.patch @@ -0,0 +1,29 @@ +--- a/include/configs/nas220.h ++++ b/include/configs/nas220.h +@@ -54,17 +54,22 @@ + /* + * Default environment variables + */ +-#define CONFIG_BOOTCOMMAND "" ++#define CONFIG_BOOTCOMMAND \ ++ "ubi part ubi; " \ ++ "ubi read 0x800000 kernel; " \ ++ "bootm 0x800000" + + #define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=console=ttyS0,115200\0" \ + "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ + "0x010000@0xa0000(env),"\ +- "0x500000@0xc0000(uimage),"\ +- "0x1a40000@0x5c0000(rootfs)\0" \ ++ "0x1e80000@0xc0000(ubi)\0"\ + "mtdids=nand0=orion_nand\0"\ + "autostart=no\0"\ +- "autoload=no\0" ++ "autoload=no\0"\ ++ "ipaddr=10.4.50.165\0"\ ++ "serverip=10.4.50.5\0"\ ++ "bootdelay=3" + + /* + * Ethernet Driver configuration -- cgit v1.2.3