From 02e8182d87945729eafe5ce1c7992a0c132eae61 Mon Sep 17 00:00:00 2001 From: Roman Kuzmitskii Date: Sun, 18 Oct 2020 18:05:23 +0000 Subject: sunxi: add support for Libre Computer ALL-H3-CC H5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specification: - CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz - DDR3 RAM: 2GB - Network: 10/100M Ethernet x 1 - IR: x1 (Receive) - USB (Host) Type-A x3 - USB (OTG) Type-A x1 - MicroSD Slot x 1 - eMMC Slot x1 - MicroUSB power input - GPIO 40pin header - UART 3pin header - Leds: - librecomputer:blue:status - librecomputer:green:pwr - Buttons: - uboot button (used to enter fel mode) - power button (can trigger power on) - Power Supply via MicroUSB or GPIO 5V/2A Installation: - Write the image to SD Card with dd - Boot from the SD Card Signed-off-by: Roman Kuzmitskii [Fixed Signed-off-by] Signed-off-by: Petr Štetiar --- package/boot/uboot-sunxi/Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'package/boot/uboot-sunxi/Makefile') diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index 58a5923eab..859a06019b 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -226,6 +226,14 @@ define U-Boot/pangolin UENV:=pangolin endef +define U-Boot/libretech_all_h3_cc_h5 + BUILD_SUBTARGET:=cortexa53 + NAME:=Libre Computer ALL-H3-CC H5 + BUILD_DEVICES:=libretech_all-h3-cc-h5 + DEPENDS:=+PACKAGE_u-boot-libretech_all_h3_cc_h5:arm-trusted-firmware-sunxi + UENV:=a64 +endef + define U-Boot/nanopi_neo_plus2 BUILD_SUBTARGET:=cortexa53 NAME:=NanoPi NEO Plus2 (H5) @@ -328,7 +336,8 @@ UBOOT_TARGETS := \ pangolin \ pine64_plus \ sopine_baseboard \ - orangepi_zero_plus + orangepi_zero_plus \ + libretech_all_h3_cc_h5 UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes -- cgit v1.2.3