From c65c306d336418f3b6519693d892148f6e2eb38e Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Sun, 6 Sep 2020 09:52:43 +0200 Subject: ath79: add support for Wallys DR531 Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Support for this device was first introduced in e767980eb8 (ar71xx target). Specifications: - Qualcomm/Atheros QCA9531 v2 - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of flash (SPI NOR) - 2T2R 2.4 GHz Wi-Fi, with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors (optional IPEX/U.FL) - mini PCIe connector (PCIe/USB buses and mini SIM slot) - 7x LED, 1x button, 1x optional buzzer - UART, JTAG and LED headers on PCB Flash instruction (do it under U-Boot, using UART): tftpb 0x80060000 openwrt-ath79-...-dr531-squashfs-sysupgrade.bin erase 0x9f050000 +$filesize cp.b $fileaddr 0x9f050000 $filesize setenv bootcmd "bootm 0x9f050000" saveenv && reset Signed-off-by: Piotr Dymacz --- target/linux/ath79/dts/qca9531_wallys_dr531.dts | 158 +++++++++++++++++++++ .../ath79/generic/base-files/etc/board.d/01_leds | 9 ++ target/linux/ath79/image/generic.mk | 10 ++ 3 files changed, 177 insertions(+) create mode 100644 target/linux/ath79/dts/qca9531_wallys_dr531.dts diff --git a/target/linux/ath79/dts/qca9531_wallys_dr531.dts b/target/linux/ath79/dts/qca9531_wallys_dr531.dts new file mode 100644 index 0000000000..a31e24b7cc --- /dev/null +++ b/target/linux/ath79/dts/qca9531_wallys_dr531.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include + +/ { + model = "Wallys DR531"; + compatible = "wallys,dr531", "qca,qca9531"; + + aliases { + label-mac-device = ð1; + led-boot = &led_sig4; + led-failsafe = &led_sig4; + led-upgrade = &led_sig4; + }; + + gpio-export { + compatible = "gpio-export"; + + buzzer { + gpio-export,name = "buzzer"; + gpio-export,output = <0>; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "dr531:green:lan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + led_sig4: sig4 { + label = "dr531:green:sig4"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + sig1 { + label = "dr531:green:sig1"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + sig2 { + label = "dr531:green:sig2"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + sig3 { + label = "dr531:green:sig3"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "dr531:green:wan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + mtd-mac-address = <&env 0xf818>; +}; + +ð1 { + /* Workaround: keep the Ethernet interfaces order/mapping correct + * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target) */ + compatible = "qca,qca9530-eth", "syscon", "simple-mfd"; + + mtd-mac-address = <&env 0xf810>; +}; + +&pcie0 { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x030000>; + read-only; + }; + + env: partition@30000 { + label = "u-boot-env"; + reg = <0x030000 0x010000>; + }; + + partition@40000 { + label = "partition-table"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0x7a0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index a90aaf0231..2b7b3bed55 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -356,6 +356,15 @@ ubnt,powerbeam-5ac-gen2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:blue:rssi2" "wlan0" "51" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100" ;; +wallys,dr531) + ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" + ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x2" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "sig1" "SIG1" "$boardname:green:sig1" "wlan0" "1" "100" + ucidef_set_led_rssi "sig2" "SIG2" "$boardname:green:sig2" "wlan0" "25" "100" + ucidef_set_led_rssi "sig3" "SIG3" "$boardname:green:sig3" "wlan0" "50" "100" + ucidef_set_led_rssi "sig4" "SIG4" "$boardname:green:sig4" "wlan0" "75" "100" + ;; wd,mynet-wifi-rangeextender) ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 54e927cb8e..e8bc74178f 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1517,6 +1517,16 @@ define Device/trendnet_tew-823dru endef TARGET_DEVICES += trendnet_tew-823dru +define Device/wallys_dr531 + SOC := qca9531 + DEVICE_VENDOR := Wallys + DEVICE_MODEL := DR531 + DEVICE_PACKAGES := kmod-usb2 rssileds + IMAGE_SIZE := 7808k + SUPPORTED_DEVICES += dr531 +endef +TARGET_DEVICES += wallys_dr531 + define Device/wd_mynet-n750 $(Device/seama) SOC := ar9344 -- cgit v1.2.3