From bb1eb5e8e6609d0a2f2c8d3123038bee410bdb0e Mon Sep 17 00:00:00 2001 From: Ian Chang Date: Thu, 2 Sep 2021 17:47:01 +0800 Subject: mvebu: backport CN9130 dts necessary files changes to 5.4 1. Add support for Marvell CN9130 SoC 2. Add support for CP115,and create an armada-cp11x.dtsi file which will be used to instantiate both CP110 and CP115 3. Add support for AP807/AP807-quad,AP807 is a major component of CN9130 SoC series 4. Drop PCIe I/O ranges from CP11x file and externalize PCIe macros from CP11x file Signed-off-by: Ian Chang (cherry picked from commit c98ddf0f019986bbb4c868bfcaf97e0d1f4ee2dc) Signed-off-by: Daniel Golle --- ...arvell-Add-support-for-Marvell-CN9130-SoC.patch | 55 + ...5-arm64-dts-marvell-Add-support-for-CP115.patch | 30 + ...marvell-Prepare-the-introduction-of-CP115.patch | 1318 ++++++++++++++++++++ ...-marvell-Add-support-for-AP807-AP807-quad.patch | 102 ++ ...-marvell-Add-AP807-quad-cache-description.patch | 87 ++ ...arvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch | 135 ++ ...arvell-Externalize-PCIe-macros-from-CP11x.patch | 129 ++ ...-marvell-Enumerate-the-first-AP806-syscon.patch | 25 + ...arvell-Prepare-the-introduction-of-AP807-.patch | 937 ++++++++++++++ ...arvell-Move-clocks-to-AP806-specific-file.patch | 65 + 10 files changed, 2883 insertions(+) create mode 100644 target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch create mode 100644 target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch create mode 100644 target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch create mode 100644 target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch create mode 100644 target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch create mode 100644 target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch create mode 100644 target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch create mode 100644 target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch create mode 100644 target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch create mode 100644 target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch diff --git a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch b/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch new file mode 100644 index 0000000000..0f4d14188d --- /dev/null +++ b/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch @@ -0,0 +1,55 @@ +From 6b8970bd8d7a17a648e31f3996d9b21336b4a2cf Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:35 +0200 +Subject: [PATCH] arm64: dts: marvell: Add support for Marvell CN9130 SoC + support + +A CN9130 SoC has one AP807 and one internal CP115. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/cn9130.dtsi | 37 +++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi +@@ -0,0 +1,37 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2019 Marvell International Ltd. ++ * ++ * Device tree for the CN9130 SoC. ++ */ ++ ++#include "armada-ap807-quad.dtsi" ++ ++/ { ++ model = "Marvell Armada CN9130 SoC"; ++ compatible = "marvell,cn9130", "marvell,armada-ap807-quad", ++ "marvell,armada-ap807"; ++}; ++ ++/* ++ * Instantiate the internal CP115 ++ */ ++ ++#define CP11X_NAME cp0 ++#define CP11X_BASE f2000000 ++#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ ++ 0xe0000000 + ((iface - 1) * 0x1000000)) ++#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) ++#define CP11X_PCIE0_BASE f2600000 ++#define CP11X_PCIE1_BASE f2620000 ++#define CP11X_PCIE2_BASE f2640000 ++ ++#include "armada-cp115.dtsi" ++ ++#undef CP11X_NAME ++#undef CP11X_BASE ++#undef CP11X_PCIEx_MEM_BASE ++#undef CP11X_PCIEx_MEM_SIZE ++#undef CP11X_PCIE0_BASE ++#undef CP11X_PCIE1_BASE ++#undef CP11X_PCIE2_BASE diff --git a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch b/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch new file mode 100644 index 0000000000..1ef87ed227 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch @@ -0,0 +1,30 @@ +From 96bb4b31aa660e39fca2bb464b9a9f399bd5b71c Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:32 +0200 +Subject: [PATCH] arm64: dts: marvell: Add support for CP115 + +Create a DTSI file based on the CP11x one. Differences will be +described in the near future. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi +@@ -0,0 +1,12 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2019 Marvell Technology Group Ltd. ++ * ++ * Device Tree file for Marvell Armada CP115. ++ */ ++ ++#define CP11X_TYPE cp115 ++ ++#include "armada-cp11x.dtsi" ++ ++#undef CP11X_TYPE diff --git a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch b/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch new file mode 100644 index 0000000000..5e41f548d6 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch @@ -0,0 +1,1318 @@ +From 47cf40af64c35a69ef6a193c47768ad1bda29db2 Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:29 +0200 +Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of CP115 + +CP110 and CP115 are almost the same in terms of features and have a +very limited set of differences. Let's create an armada-cp11x.dtsi +file which will be used to instantiate both CP110 and CP115 +nodes. + +The only changes between the two armada-cp11{0,x}.dtsi files are the +following naming in macros: s/CP110/CP11X/. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 28 +- + arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 56 +- + .../arm64/boot/dts/marvell/armada-common.dtsi | 4 +- + arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +---------------- + arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 579 ++++++++++++++++++ + 5 files changed, 627 insertions(+), 615 deletions(-) + create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi + +--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +@@ -17,23 +17,23 @@ + /* + * Instantiate the CP110 + */ +-#define CP110_NAME cp0 +-#define CP110_BASE f2000000 +-#define CP110_PCIE_IO_BASE 0xf9000000 +-#define CP110_PCIE_MEM_BASE 0xf6000000 +-#define CP110_PCIE0_BASE f2600000 +-#define CP110_PCIE1_BASE f2620000 +-#define CP110_PCIE2_BASE f2640000 ++#define CP11X_NAME cp0 ++#define CP11X_BASE f2000000 ++#define CP11X_PCIE_IO_BASE 0xf9000000 ++#define CP11X_PCIE_MEM_BASE 0xf6000000 ++#define CP11X_PCIE0_BASE f2600000 ++#define CP11X_PCIE1_BASE f2620000 ++#define CP11X_PCIE2_BASE f2640000 + + #include "armada-cp110.dtsi" + +-#undef CP110_NAME +-#undef CP110_BASE +-#undef CP110_PCIE_IO_BASE +-#undef CP110_PCIE_MEM_BASE +-#undef CP110_PCIE0_BASE +-#undef CP110_PCIE1_BASE +-#undef CP110_PCIE2_BASE ++#undef CP11X_NAME ++#undef CP11X_BASE ++#undef CP11X_PCIE_IO_BASE ++#undef CP11X_PCIE_MEM_BASE ++#undef CP11X_PCIE0_BASE ++#undef CP11X_PCIE1_BASE ++#undef CP11X_PCIE2_BASE + + &cp0_gpio1 { + status = "okay"; +--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +@@ -19,44 +19,44 @@ + /* + * Instantiate the master CP110 + */ +-#define CP110_NAME cp0 +-#define CP110_BASE f2000000 +-#define CP110_PCIE_IO_BASE 0xf9000000 +-#define CP110_PCIE_MEM_BASE 0xf6000000 +-#define CP110_PCIE0_BASE f2600000 +-#define CP110_PCIE1_BASE f2620000 +-#define CP110_PCIE2_BASE f2640000 ++#define CP11X_NAME cp0 ++#define CP11X_BASE f2000000 ++#define CP11X_PCIE_IO_BASE 0xf9000000 ++#define CP11X_PCIE_MEM_BASE 0xf6000000 ++#define CP11X_PCIE0_BASE f2600000 ++#define CP11X_PCIE1_BASE f2620000 ++#define CP11X_PCIE2_BASE f2640000 + + #include "armada-cp110.dtsi" + +-#undef CP110_NAME +-#undef CP110_BASE +-#undef CP110_PCIE_IO_BASE +-#undef CP110_PCIE_MEM_BASE +-#undef CP110_PCIE0_BASE +-#undef CP110_PCIE1_BASE +-#undef CP110_PCIE2_BASE ++#undef CP11X_NAME ++#undef CP11X_BASE ++#undef CP11X_PCIE_IO_BASE ++#undef CP11X_PCIE_MEM_BASE ++#undef CP11X_PCIE0_BASE ++#undef CP11X_PCIE1_BASE ++#undef CP11X_PCIE2_BASE + + /* + * Instantiate the slave CP110 + */ +-#define CP110_NAME cp1 +-#define CP110_BASE f4000000 +-#define CP110_PCIE_IO_BASE 0xfd000000 +-#define CP110_PCIE_MEM_BASE 0xfa000000 +-#define CP110_PCIE0_BASE f4600000 +-#define CP110_PCIE1_BASE f4620000 +-#define CP110_PCIE2_BASE f4640000 ++#define CP11X_NAME cp1 ++#define CP11X_BASE f4000000 ++#define CP11X_PCIE_IO_BASE 0xfd000000 ++#define CP11X_PCIE_MEM_BASE 0xfa000000 ++#define CP11X_PCIE0_BASE f4600000 ++#define CP11X_PCIE1_BASE f4620000 ++#define CP11X_PCIE2_BASE f4640000 + + #include "armada-cp110.dtsi" + +-#undef CP110_NAME +-#undef CP110_BASE +-#undef CP110_PCIE_IO_BASE +-#undef CP110_PCIE_MEM_BASE +-#undef CP110_PCIE0_BASE +-#undef CP110_PCIE1_BASE +-#undef CP110_PCIE2_BASE ++#undef CP11X_NAME ++#undef CP11X_BASE ++#undef CP11X_PCIE_IO_BASE ++#undef CP11X_PCIE_MEM_BASE ++#undef CP11X_PCIE0_BASE ++#undef CP11X_PCIE1_BASE ++#undef CP11X_PCIE2_BASE + + /* The 80x0 has two CP blocks, but uses only one block from each. */ + &cp1_gpio1 { +--- a/arch/arm64/boot/dts/marvell/armada-common.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi +@@ -6,6 +6,6 @@ + /* Common definitions used by Armada 7K/8K DTs */ + #define PASTER(x, y) x ## y + #define EVALUATOR(x, y) PASTER(x, y) +-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +-#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) ++#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) ++#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) + #define ADDRESSIFY(addr) EVALUATOR(0x, addr) +--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +@@ -1,579 +1,12 @@ + // SPDX-License-Identifier: (GPL-2.0+ OR MIT) + /* +- * Copyright (C) 2016 Marvell Technology Group Ltd. ++ * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP110. + */ + +-#include +-#include ++#define CP11X_TYPE cp110 + +-#include "armada-common.dtsi" ++#include "armada-cp11x.dtsi" + +-#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) +-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) +-#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) +- +-/ { +- /* +- * The contents of the node are defined below, in order to +- * save one indentation level +- */ +- CP110_NAME: CP110_NAME { }; +- +- /* +- * CPs only have one sensor in the thermal IC. +- * +- * The cooling maps are empty as there are no cooling devices. +- */ +- thermal-zones { +- CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { +- polling-delay-passive = <0>; /* Interrupt driven */ +- polling-delay = <0>; /* Interrupt driven */ +- +- thermal-sensors = <&CP110_LABEL(thermal) 0>; +- +- trips { +- CP110_LABEL(crit): crit { +- temperature = <100000>; /* mC degrees */ +- hysteresis = <2000>; /* mC degrees */ +- type = "critical"; +- }; +- }; +- +- cooling-maps { }; +- }; +- }; +-}; +- +-&CP110_NAME { +- #address-cells = <2>; +- #size-cells = <2>; +- compatible = "simple-bus"; +- interrupt-parent = <&CP110_LABEL(icu_nsr)>; +- ranges; +- +- config-space@CP110_BASE { +- #address-cells = <1>; +- #size-cells = <1>; +- compatible = "simple-bus"; +- ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; +- +- CP110_LABEL(ethernet): ethernet@0 { +- compatible = "marvell,armada-7k-pp22"; +- reg = <0x0 0x100000>, <0x129000 0xb000>; +- clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, +- <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, +- <&CP110_LABEL(clk) 1 18>; +- clock-names = "pp_clk", "gop_clk", +- "mg_clk", "mg_core_clk", "axi_clk"; +- marvell,system-controller = <&CP110_LABEL(syscon0)>; +- status = "disabled"; +- dma-coherent; +- +- CP110_LABEL(eth0): eth0 { +- interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, +- <43 IRQ_TYPE_LEVEL_HIGH>, +- <47 IRQ_TYPE_LEVEL_HIGH>, +- <51 IRQ_TYPE_LEVEL_HIGH>, +- <55 IRQ_TYPE_LEVEL_HIGH>, +- <59 IRQ_TYPE_LEVEL_HIGH>, +- <63 IRQ_TYPE_LEVEL_HIGH>, +- <67 IRQ_TYPE_LEVEL_HIGH>, +- <71 IRQ_TYPE_LEVEL_HIGH>, +- <129 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "hif0", "hif1", "hif2", +- "hif3", "hif4", "hif5", "hif6", "hif7", +- "hif8", "link"; +- port-id = <0>; +- gop-port-id = <0>; +- status = "disabled"; +- }; +- +- CP110_LABEL(eth1): eth1 { +- interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, +- <44 IRQ_TYPE_LEVEL_HIGH>, +- <48 IRQ_TYPE_LEVEL_HIGH>, +- <52 IRQ_TYPE_LEVEL_HIGH>, +- <56 IRQ_TYPE_LEVEL_HIGH>, +- <60 IRQ_TYPE_LEVEL_HIGH>, +- <64 IRQ_TYPE_LEVEL_HIGH>, +- <68 IRQ_TYPE_LEVEL_HIGH>, +- <72 IRQ_TYPE_LEVEL_HIGH>, +- <128 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "hif0", "hif1", "hif2", +- "hif3", "hif4", "hif5", "hif6", "hif7", +- "hif8", "link"; +- port-id = <1>; +- gop-port-id = <2>; +- status = "disabled"; +- }; +- +- CP110_LABEL(eth2): eth2 { +- interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, +- <45 IRQ_TYPE_LEVEL_HIGH>, +- <49 IRQ_TYPE_LEVEL_HIGH>, +- <53 IRQ_TYPE_LEVEL_HIGH>, +- <57 IRQ_TYPE_LEVEL_HIGH>, +- <61 IRQ_TYPE_LEVEL_HIGH>, +- <65 IRQ_TYPE_LEVEL_HIGH>, +- <69 IRQ_TYPE_LEVEL_HIGH>, +- <73 IRQ_TYPE_LEVEL_HIGH>, +- <127 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "hif0", "hif1", "hif2", +- "hif3", "hif4", "hif5", "hif6", "hif7", +- "hif8", "link"; +- port-id = <2>; +- gop-port-id = <3>; +- status = "disabled"; +- }; +- }; +- +- CP110_LABEL(comphy): phy@120000 { +- compatible = "marvell,comphy-cp110"; +- reg = <0x120000 0x6000>; +- marvell,system-controller = <&CP110_LABEL(syscon0)>; +- clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, +- <&CP110_LABEL(clk) 1 18>; +- clock-names = "mg_clk", "mg_core_clk", "axi_clk"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- CP110_LABEL(comphy0): phy@0 { +- reg = <0>; +- #phy-cells = <1>; +- }; +- +- CP110_LABEL(comphy1): phy@1 { +- reg = <1>; +- #phy-cells = <1>; +- }; +- +- CP110_LABEL(comphy2): phy@2 { +- reg = <2>; +- #phy-cells = <1>; +- }; +- +- CP110_LABEL(comphy3): phy@3 { +- reg = <3>; +- #phy-cells = <1>; +- }; +- +- CP110_LABEL(comphy4): phy@4 { +- reg = <4>; +- #phy-cells = <1>; +- }; +- +- CP110_LABEL(comphy5): phy@5 { +- reg = <5>; +- #phy-cells = <1>; +- }; +- }; +- +- CP110_LABEL(mdio): mdio@12a200 { +- #address-cells = <1>; +- #size-cells = <0>; +- compatible = "marvell,orion-mdio"; +- reg = <0x12a200 0x10>; +- clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, +- <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; +- status = "disabled"; +- }; +- +- CP110_LABEL(xmdio): mdio@12a600 { +- #address-cells = <1>; +- #size-cells = <0>; +- compatible = "marvell,xmdio"; +- reg = <0x12a600 0x10>; +- clocks = <&CP110_LABEL(clk) 1 5>, +- <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; +- status = "disabled"; +- }; +- +- CP110_LABEL(icu): interrupt-controller@1e0000 { +- compatible = "marvell,cp110-icu"; +- reg = <0x1e0000 0x440>; +- #address-cells = <1>; +- #size-cells = <1>; +- +- CP110_LABEL(icu_nsr): interrupt-controller@10 { +- compatible = "marvell,cp110-icu-nsr"; +- reg = <0x10 0x20>; +- #interrupt-cells = <2>; +- interrupt-controller; +- msi-parent = <&gicp>; +- }; +- +- CP110_LABEL(icu_sei): interrupt-controller@50 { +- compatible = "marvell,cp110-icu-sei"; +- reg = <0x50 0x10>; +- #interrupt-cells = <2>; +- interrupt-controller; +- msi-parent = <&sei>; +- }; +- }; +- +- CP110_LABEL(rtc): rtc@284000 { +- compatible = "marvell,armada-8k-rtc"; +- reg = <0x284000 0x20>, <0x284080 0x24>; +- reg-names = "rtc", "rtc-soc"; +- interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; +- }; +- +- CP110_LABEL(syscon0): system-controller@440000 { +- compatible = "syscon", "simple-mfd"; +- reg = <0x440000 0x2000>; +- +- CP110_LABEL(clk): clock { +- compatible = "marvell,cp110-clock"; +- #clock-cells = <2>; +- }; +- +- CP110_LABEL(gpio1): gpio@100 { +- compatible = "marvell,armada-8k-gpio"; +- offset = <0x100>; +- ngpios = <32>; +- gpio-controller; +- #gpio-cells = <2>; +- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; +- interrupt-controller; +- interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, +- <85 IRQ_TYPE_LEVEL_HIGH>, +- <84 IRQ_TYPE_LEVEL_HIGH>, +- <83 IRQ_TYPE_LEVEL_HIGH>; +- #interrupt-cells = <2>; +- status = "disabled"; +- }; +- +- CP110_LABEL(gpio2): gpio@140 { +- compatible = "marvell,armada-8k-gpio"; +- offset = <0x140>; +- ngpios = <31>; +- gpio-controller; +- #gpio-cells = <2>; +- gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; +- interrupt-controller; +- interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, +- <81 IRQ_TYPE_LEVEL_HIGH>, +- <80 IRQ_TYPE_LEVEL_HIGH>, +- <79 IRQ_TYPE_LEVEL_HIGH>; +- #interrupt-cells = <2>; +- status = "disabled"; +- }; +- }; +- +- CP110_LABEL(syscon1): system-controller@400000 { +- compatible = "syscon", "simple-mfd"; +- reg = <0x400000 0x1000>; +- #address-cells = <1>; +- #size-cells = <1>; +- +- CP110_LABEL(thermal): thermal-sensor@70 { +- compatible = "marvell,armada-cp110-thermal"; +- reg = <0x70 0x10>; +- interrupts-extended = +- <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; +- #thermal-sensor-cells = <1>; +- }; +- }; +- +- CP110_LABEL(usb3_0): usb3@500000 { +- compatible = "marvell,armada-8k-xhci", +- "generic-xhci"; +- reg = <0x500000 0x4000>; +- dma-coherent; +- interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 22>, +- <&CP110_LABEL(clk) 1 16>; +- status = "disabled"; +- }; +- +- CP110_LABEL(usb3_1): usb3@510000 { +- compatible = "marvell,armada-8k-xhci", +- "generic-xhci"; +- reg = <0x510000 0x4000>; +- dma-coherent; +- interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 23>, +- <&CP110_LABEL(clk) 1 16>; +- status = "disabled"; +- }; +- +- CP110_LABEL(sata0): sata@540000 { +- compatible = "marvell,armada-8k-ahci", +- "generic-ahci"; +- reg = <0x540000 0x30000>; +- dma-coherent; +- interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; +- clocks = <&CP110_LABEL(clk) 1 15>, +- <&CP110_LABEL(clk) 1 16>; +- #address-cells = <1>; +- #size-cells = <0>; +- status = "disabled"; +- +- sata-port@0 { +- reg = <0>; +- }; +- +- sata-port@1 { +- reg = <1>; +- }; +- }; +- +- CP110_LABEL(xor0): xor@6a0000 { +- compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; +- reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; +- dma-coherent; +- msi-parent = <&gic_v2m0>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 8>, +- <&CP110_LABEL(clk) 1 14>; +- }; +- +- CP110_LABEL(xor1): xor@6c0000 { +- compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; +- reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; +- dma-coherent; +- msi-parent = <&gic_v2m0>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 7>, +- <&CP110_LABEL(clk) 1 14>; +- }; +- +- CP110_LABEL(spi0): spi@700600 { +- compatible = "marvell,armada-380-spi"; +- reg = <0x700600 0x50>; +- #address-cells = <0x1>; +- #size-cells = <0x0>; +- clock-names = "core", "axi"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(spi1): spi@700680 { +- compatible = "marvell,armada-380-spi"; +- reg = <0x700680 0x50>; +- #address-cells = <1>; +- #size-cells = <0>; +- clock-names = "core", "axi"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(i2c0): i2c@701000 { +- compatible = "marvell,mv78230-i2c"; +- reg = <0x701000 0x20>; +- #address-cells = <1>; +- #size-cells = <0>; +- interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(i2c1): i2c@701100 { +- compatible = "marvell,mv78230-i2c"; +- reg = <0x701100 0x20>; +- #address-cells = <1>; +- #size-cells = <0>; +- interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(uart0): serial@702000 { +- compatible = "snps,dw-apb-uart"; +- reg = <0x702000 0x100>; +- reg-shift = <2>; +- interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; +- reg-io-width = <1>; +- clock-names = "baudclk", "apb_pclk"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(uart1): serial@702100 { +- compatible = "snps,dw-apb-uart"; +- reg = <0x702100 0x100>; +- reg-shift = <2>; +- interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; +- reg-io-width = <1>; +- clock-names = "baudclk", "apb_pclk"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(uart2): serial@702200 { +- compatible = "snps,dw-apb-uart"; +- reg = <0x702200 0x100>; +- reg-shift = <2>; +- interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; +- reg-io-width = <1>; +- clock-names = "baudclk", "apb_pclk"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(uart3): serial@702300 { +- compatible = "snps,dw-apb-uart"; +- reg = <0x702300 0x100>; +- reg-shift = <2>; +- interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; +- reg-io-width = <1>; +- clock-names = "baudclk", "apb_pclk"; +- clocks = <&CP110_LABEL(clk) 1 21>, +- <&CP110_LABEL(clk) 1 17>; +- status = "disabled"; +- }; +- +- CP110_LABEL(nand_controller): nand@720000 { +- /* +- * Due to the limitation of the pins available +- * this controller is only usable on the CPM +- * for A7K and on the CPS for A8K. +- */ +- compatible = "marvell,armada-8k-nand-controller", +- "marvell,armada370-nand-controller"; +- reg = <0x720000 0x54>; +- #address-cells = <1>; +- #size-cells = <0>; +- interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 2>, +- <&CP110_LABEL(clk) 1 17>; +- marvell,system-controller = <&CP110_LABEL(syscon0)>; +- status = "disabled"; +- }; +- +- CP110_LABEL(trng): trng@760000 { +- compatible = "marvell,armada-8k-rng", +- "inside-secure,safexcel-eip76"; +- reg = <0x760000 0x7d>; +- interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 25>, +- <&CP110_LABEL(clk) 1 17>; +- status = "okay"; +- }; +- +- CP110_LABEL(sdhci0): sdhci@780000 { +- compatible = "marvell,armada-cp110-sdhci"; +- reg = <0x780000 0x300>; +- interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; +- clock-names = "core", "axi"; +- clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; +- dma-coherent; +- status = "disabled"; +- }; +- +- CP110_LABEL(crypto): crypto@800000 { +- compatible = "inside-secure,safexcel-eip197b"; +- reg = <0x800000 0x200000>; +- interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, +- <88 IRQ_TYPE_LEVEL_HIGH>, +- <89 IRQ_TYPE_LEVEL_HIGH>, +- <90 IRQ_TYPE_LEVEL_HIGH>, +- <91 IRQ_TYPE_LEVEL_HIGH>, +- <92 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "mem", "ring0", "ring1", +- "ring2", "ring3", "eip"; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 26>, +- <&CP110_LABEL(clk) 1 17>; +- dma-coherent; +- }; +- }; +- +- CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { +- compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; +- reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, +- <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; +- reg-names = "ctrl", "config"; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- device_type = "pci"; +- dma-coherent; +- msi-parent = <&gic_v2m0>; +- +- bus-range = <0 0xff>; +- ranges = +- /* downstream I/O */ +- <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 +- /* non-prefetchable memory */ +- 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; +- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; +- num-lanes = <1>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; +- status = "disabled"; +- }; +- +- CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { +- compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; +- reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, +- <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; +- reg-names = "ctrl", "config"; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- device_type = "pci"; +- dma-coherent; +- msi-parent = <&gic_v2m0>; +- +- bus-range = <0 0xff>; +- ranges = +- /* downstream I/O */ +- <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 +- /* non-prefetchable memory */ +- 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; +- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; +- +- num-lanes = <1>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; +- status = "disabled"; +- }; +- +- CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { +- compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; +- reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, +- <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; +- reg-names = "ctrl", "config"; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- device_type = "pci"; +- dma-coherent; +- msi-parent = <&gic_v2m0>; +- +- bus-range = <0 0xff>; +- ranges = +- /* downstream I/O */ +- <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 +- /* non-prefetchable memory */ +- 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; +- interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; +- +- num-lanes = <1>; +- clock-names = "core", "reg"; +- clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; +- status = "disabled"; +- }; +-}; ++#undef CP11X_TYPE +--- /dev/null ++++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +@@ -0,0 +1,579 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2016 Marvell Technology Group Ltd. ++ * ++ * Device Tree file for Marvell Armada CP11x. ++ */ ++ ++#include ++#include ++ ++#include "armada-common.dtsi" ++ ++#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000)) ++#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000)) ++#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000) ++ ++/ { ++ /* ++ * The contents of the node are defined below, in order to ++ * save one indentation level ++ */ ++ CP11X_NAME: CP11X_NAME { }; ++ ++ /* ++ * CPs only have one sensor in the thermal IC. ++ * ++ * The cooling maps are empty as there are no cooling devices. ++ */ ++ thermal-zones { ++ CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { ++ polling-delay-passive = <0>; /* Interrupt driven */ ++ polling-delay = <0>; /* Interrupt driven */ ++ ++ thermal-sensors = <&CP11X_LABEL(thermal) 0>; ++ ++ trips { ++ CP11X_LABEL(crit): crit { ++ temperature = <100000>; /* mC degrees */ ++ hysteresis = <2000>; /* mC degrees */ ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { }; ++ }; ++ }; ++}; ++ ++&CP11X_NAME { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ compatible = "simple-bus"; ++ interrupt-parent = <&CP11X_LABEL(icu_nsr)>; ++ ranges; ++ ++ config-space@CP11X_BASE { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "simple-bus"; ++ ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; ++ ++ CP11X_LABEL(ethernet): ethernet@0 { ++ compatible = "marvell,armada-7k-pp22"; ++ reg = <0x0 0x100000>, <0x129000 0xb000>; ++ clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, ++ <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, ++ <&CP11X_LABEL(clk) 1 18>; ++ clock-names = "pp_clk", "gop_clk", ++ "mg_clk", "mg_core_clk", "axi_clk"; ++ marvell,system-controller = <&CP11X_LABEL(syscon0)>; ++ status = "disabled"; ++ dma-coherent; ++ ++ CP11X_LABEL(eth0): eth0 { ++ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, ++ <43 IRQ_TYPE_LEVEL_HIGH>, ++ <47 IRQ_TYPE_LEVEL_HIGH>, ++ <51 IRQ_TYPE_LEVEL_HIGH>, ++ <55 IRQ_TYPE_LEVEL_HIGH>, ++ <59 IRQ_TYPE_LEVEL_HIGH>, ++ <63 IRQ_TYPE_LEVEL_HIGH>, ++ <67 IRQ_TYPE_LEVEL_HIGH>, ++ <71 IRQ_TYPE_LEVEL_HIGH>, ++ <129 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "hif0", "hif1", "hif2", ++ "hif3", "hif4", "hif5", "hif6", "hif7", ++ "hif8", "link"; ++ port-id = <0>; ++ gop-port-id = <0>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(eth1): eth1 { ++ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, ++ <44 IRQ_TYPE_LEVEL_HIGH>, ++ <48 IRQ_TYPE_LEVEL_HIGH>, ++ <52 IRQ_TYPE_LEVEL_HIGH>, ++ <56 IRQ_TYPE_LEVEL_HIGH>, ++ <60 IRQ_TYPE_LEVEL_HIGH>, ++ <64 IRQ_TYPE_LEVEL_HIGH>, ++ <68 IRQ_TYPE_LEVEL_HIGH>, ++ <72 IRQ_TYPE_LEVEL_HIGH>, ++ <128 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "hif0", "hif1", "hif2", ++ "hif3", "hif4", "hif5", "hif6", "hif7", ++ "hif8", "link"; ++ port-id = <1>; ++ gop-port-id = <2>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(eth2): eth2 { ++ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, ++ <45 IRQ_TYPE_LEVEL_HIGH>, ++ <49 IRQ_TYPE_LEVEL_HIGH>, ++ <53 IRQ_TYPE_LEVEL_HIGH>, ++ <57 IRQ_TYPE_LEVEL_HIGH>, ++ <61 IRQ_TYPE_LEVEL_HIGH>, ++ <65 IRQ_TYPE_LEVEL_HIGH>, ++ <69 IRQ_TYPE_LEVEL_HIGH>, ++ <73 IRQ_TYPE_LEVEL_HIGH>, ++ <127 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "hif0", "hif1", "hif2", ++ "hif3", "hif4", "hif5", "hif6", "hif7", ++ "hif8", "link"; ++ port-id = <2>; ++ gop-port-id = <3>; ++ status = "disabled"; ++ }; ++ }; ++ ++ CP11X_LABEL(comphy): phy@120000 { ++ compatible = "marvell,comphy-cp110"; ++ reg = <0x120000 0x6000>; ++ marvell,system-controller = <&CP11X_LABEL(syscon0)>; ++ clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, ++ <&CP11X_LABEL(clk) 1 18>; ++ clock-names = "mg_clk", "mg_core_clk", "axi_clk"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ CP11X_LABEL(comphy0): phy@0 { ++ reg = <0>; ++ #phy-cells = <1>; ++ }; ++ ++ CP11X_LABEL(comphy1): phy@1 { ++ reg = <1>; ++ #phy-cells = <1>; ++ }; ++ ++ CP11X_LABEL(comphy2): phy@2 { ++ reg = <2>; ++ #phy-cells = <1>; ++ }; ++ ++ CP11X_LABEL(comphy3): phy@3 { ++ reg = <3>; ++ #phy-cells = <1>; ++ }; ++ ++ CP11X_LABEL(comphy4): phy@4 { ++ reg = <4>; ++ #phy-cells = <1>; ++ }; ++ ++ CP11X_LABEL(comphy5): phy@5 { ++ reg = <5>; ++ #phy-cells = <1>; ++ }; ++ }; ++ ++ CP11X_LABEL(mdio): mdio@12a200 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "marvell,orion-mdio"; ++ reg = <0x12a200 0x10>; ++ clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, ++ <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(xmdio): mdio@12a600 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "marvell,xmdio"; ++ reg = <0x12a600 0x10>; ++ clocks = <&CP11X_LABEL(clk) 1 5>, ++ <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(icu): interrupt-controller@1e0000 { ++ compatible = "marvell,cp110-icu"; ++ reg = <0x1e0000 0x440>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ CP11X_LABEL(icu_nsr): interrupt-controller@10 { ++ compatible = "marvell,cp110-icu-nsr"; ++ reg = <0x10 0x20>; ++ #interrupt-cells = <2>; ++ interrupt-controller; ++ msi-parent = <&gicp>; ++ }; ++ ++ CP11X_LABEL(icu_sei): interrupt-controller@50 { ++ compatible = "marvell,cp110-icu-sei"; ++ reg = <0x50 0x10>; ++ #interrupt-cells = <2>; ++ interrupt-controller; ++ msi-parent = <&sei>; ++ }; ++ }; ++ ++ CP11X_LABEL(rtc): rtc@284000 { ++ compatible = "marvell,armada-8k-rtc"; ++ reg = <0x284000 0x20>, <0x284080 0x24>; ++ reg-names = "rtc", "rtc-soc"; ++ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; ++ }; ++ ++ CP11X_LABEL(syscon0): system-controller@440000 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x440000 0x2000>; ++ ++ CP11X_LABEL(clk): clock { ++ compatible = "marvell,cp110-clock"; ++ #clock-cells = <2>; ++ }; ++ ++ CP11X_LABEL(gpio1): gpio@100 { ++ compatible = "marvell,armada-8k-gpio"; ++ offset = <0x100>; ++ ngpios = <32>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; ++ interrupt-controller; ++ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, ++ <85 IRQ_TYPE_LEVEL_HIGH>, ++ <84 IRQ_TYPE_LEVEL_HIGH>, ++ <83 IRQ_TYPE_LEVEL_HIGH>; ++ #interrupt-cells = <2>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(gpio2): gpio@140 { ++ compatible = "marvell,armada-8k-gpio"; ++ offset = <0x140>; ++ ngpios = <31>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; ++ interrupt-controller; ++ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, ++ <81 IRQ_TYPE_LEVEL_HIGH>, ++ <80 IRQ_TYPE_LEVEL_HIGH>, ++ <79 IRQ_TYPE_LEVEL_HIGH>; ++ #interrupt-cells = <2>; ++ status = "disabled"; ++ }; ++ }; ++ ++ CP11X_LABEL(syscon1): system-controller@400000 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x400000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ CP11X_LABEL(thermal): thermal-sensor@70 { ++ compatible = "marvell,armada-cp110-thermal"; ++ reg = <0x70 0x10>; ++ interrupts-extended = ++ <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; ++ #thermal-sensor-cells = <1>; ++ }; ++ }; ++ ++ CP11X_LABEL(usb3_0): usb3@500000 { ++ compatible = "marvell,armada-8k-xhci", ++ "generic-xhci"; ++ reg = <0x500000 0x4000>; ++ dma-coherent; ++ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 22>, ++ <&CP11X_LABEL(clk) 1 16>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(usb3_1): usb3@510000 { ++ compatible = "marvell,armada-8k-xhci", ++ "generic-xhci"; ++ reg = <0x510000 0x4000>; ++ dma-coherent; ++ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 23>, ++ <&CP11X_LABEL(clk) 1 16>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(sata0): sata@540000 { ++ compatible = "marvell,armada-8k-ahci", ++ "generic-ahci"; ++ reg = <0x540000 0x30000>; ++ dma-coherent; ++ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&CP11X_LABEL(clk) 1 15>, ++ <&CP11X_LABEL(clk) 1 16>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ ++ sata-port@0 { ++ reg = <0>; ++ }; ++ ++ sata-port@1 { ++ reg = <1>; ++ }; ++ }; ++ ++ CP11X_LABEL(xor0): xor@6a0000 { ++ compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; ++ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; ++ dma-coherent; ++ msi-parent = <&gic_v2m0>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 8>, ++ <&CP11X_LABEL(clk) 1 14>; ++ }; ++ ++ CP11X_LABEL(xor1): xor@6c0000 { ++ compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; ++ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; ++ dma-coherent; ++ msi-parent = <&gic_v2m0>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 7>, ++ <&CP11X_LABEL(clk) 1 14>; ++ }; ++ ++ CP11X_LABEL(spi0): spi@700600 { ++ compatible = "marvell,armada-380-spi"; ++ reg = <0x700600 0x50>; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ clock-names = "core", "axi"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(spi1): spi@700680 { ++ compatible = "marvell,armada-380-spi"; ++ reg = <0x700680 0x50>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ clock-names = "core", "axi"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(i2c0): i2c@701000 { ++ compatible = "marvell,mv78230-i2c"; ++ reg = <0x701000 0x20>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(i2c1): i2c@701100 { ++ compatible = "marvell,mv78230-i2c"; ++ reg = <0x701100 0x20>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(uart0): serial@702000 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x702000 0x100>; ++ reg-shift = <2>; ++ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; ++ reg-io-width = <1>; ++ clock-names = "baudclk", "apb_pclk"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(uart1): serial@702100 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x702100 0x100>; ++ reg-shift = <2>; ++ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; ++ reg-io-width = <1>; ++ clock-names = "baudclk", "apb_pclk"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(uart2): serial@702200 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x702200 0x100>; ++ reg-shift = <2>; ++ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; ++ reg-io-width = <1>; ++ clock-names = "baudclk", "apb_pclk"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(uart3): serial@702300 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x702300 0x100>; ++ reg-shift = <2>; ++ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; ++ reg-io-width = <1>; ++ clock-names = "baudclk", "apb_pclk"; ++ clocks = <&CP11X_LABEL(clk) 1 21>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(nand_controller): nand@720000 { ++ /* ++ * Due to the limitation of the pins available ++ * this controller is only usable on the CPM ++ * for A7K and on the CPS for A8K. ++ */ ++ compatible = "marvell,armada-8k-nand-controller", ++ "marvell,armada370-nand-controller"; ++ reg = <0x720000 0x54>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 2>, ++ <&CP11X_LABEL(clk) 1 17>; ++ marvell,system-controller = <&CP11X_LABEL(syscon0)>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(trng): trng@760000 { ++ compatible = "marvell,armada-8k-rng", ++ "inside-secure,safexcel-eip76"; ++ reg = <0x760000 0x7d>; ++ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 25>, ++ <&CP11X_LABEL(clk) 1 17>; ++ status = "okay"; ++ }; ++ ++ CP11X_LABEL(sdhci0): sdhci@780000 { ++ compatible = "marvell,armada-cp110-sdhci"; ++ reg = <0x780000 0x300>; ++ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; ++ clock-names = "core", "axi"; ++ clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; ++ dma-coherent; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(crypto): crypto@800000 { ++ compatible = "inside-secure,safexcel-eip197b"; ++ reg = <0x800000 0x200000>; ++ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, ++ <88 IRQ_TYPE_LEVEL_HIGH>, ++ <89 IRQ_TYPE_LEVEL_HIGH>, ++ <90 IRQ_TYPE_LEVEL_HIGH>, ++ <91 IRQ_TYPE_LEVEL_HIGH>, ++ <92 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "mem", "ring0", "ring1", ++ "ring2", "ring3", "eip"; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 26>, ++ <&CP11X_LABEL(clk) 1 17>; ++ dma-coherent; ++ }; ++ }; ++ ++ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { ++ compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; ++ reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, ++ <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; ++ reg-names = "ctrl", "config"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ device_type = "pci"; ++ dma-coherent; ++ msi-parent = <&gic_v2m0>; ++ ++ bus-range = <0 0xff>; ++ ranges = ++ /* downstream I/O */ ++ <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000 ++ /* non-prefetchable memory */ ++ 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; ++ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; ++ num-lanes = <1>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { ++ compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; ++ reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, ++ <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; ++ reg-names = "ctrl", "config"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ device_type = "pci"; ++ dma-coherent; ++ msi-parent = <&gic_v2m0>; ++ ++ bus-range = <0 0xff>; ++ ranges = ++ /* downstream I/O */ ++ <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000 ++ /* non-prefetchable memory */ ++ 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; ++ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; ++ ++ num-lanes = <1>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; ++ status = "disabled"; ++ }; ++ ++ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { ++ compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; ++ reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, ++ <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; ++ reg-names = "ctrl", "config"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ device_type = "pci"; ++ dma-coherent; ++ msi-parent = <&gic_v2m0>; ++ ++ bus-range = <0 0xff>; ++ ranges = ++ /* downstream I/O */ ++ <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000 ++ /* non-prefetchable memory */ ++ 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; ++ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; ++ ++ num-lanes = <1>; ++ clock-names = "core", "reg"; ++ clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; ++ status = "disabled"; ++ }; ++}; diff --git a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch b/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch new file mode 100644 index 0000000000..72b46f51a7 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch @@ -0,0 +1,102 @@ +From cbafcad0641e99831ff7c57ac8f79aed502f33e5 Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:24 +0200 +Subject: [PATCH] arm64: dts: marvell: Add support for AP807/AP807-quad + +Describe AP807 and AP807-quad support. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + .../boot/dts/marvell/armada-ap807-quad.dtsi | 51 +++++++++++++++++++ + arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 +++++++++++ + 2 files changed, 80 insertions(+) + create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi + create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi +@@ -0,0 +1,51 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Device Tree file for Marvell Armada AP807 Quad ++ * ++ * Copyright (C) 2019 Marvell Technology Group Ltd. ++ */ ++ ++#include "armada-ap807.dtsi" ++ ++/ { ++ model = "Marvell Armada AP807 Quad"; ++ compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72", "arm,armv8"; ++ reg = <0x000>; ++ enable-method = "psci"; ++ #cooling-cells = <2>; ++ clocks = <&cpu_clk 0>; ++ }; ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72", "arm,armv8"; ++ reg = <0x001>; ++ enable-method = "psci"; ++ #cooling-cells = <2>; ++ clocks = <&cpu_clk 0>; ++ }; ++ cpu2: cpu@100 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72", "arm,armv8"; ++ reg = <0x100>; ++ enable-method = "psci"; ++ #cooling-cells = <2>; ++ clocks = <&cpu_clk 1>; ++ }; ++ cpu3: cpu@101 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72", "arm,armv8"; ++ reg = <0x101>; ++ enable-method = "psci"; ++ #cooling-cells = <2>; ++ clocks = <&cpu_clk 1>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi +@@ -0,0 +1,29 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Device Tree file for Marvell Armada AP807 ++ * ++ * Copyright (C) 2019 Marvell Technology Group Ltd. ++ */ ++ ++#define AP_NAME ap807 ++#include "armada-ap80x.dtsi" ++ ++/ { ++ model = "Marvell Armada AP807"; ++ compatible = "marvell,armada-ap807"; ++}; ++ ++&ap_syscon0 { ++ ap_clk: clock { ++ compatible = "marvell,ap807-clock"; ++ #clock-cells = <1>; ++ }; ++}; ++ ++&ap_syscon1 { ++ cpu_clk: clock-cpu { ++ compatible = "marvell,ap807-cpu-clock"; ++ clocks = <&ap_clk 0>, <&ap_clk 1>; ++ #clock-cells = <1>; ++ }; ++}; diff --git a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch b/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch new file mode 100644 index 0000000000..6192f5f202 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch @@ -0,0 +1,87 @@ +From 30d53abdc60a6515f02f181e7c39b7b23d5fb3aa Mon Sep 17 00:00:00 2001 +From: Grzegorz Jaszczyk +Date: Fri, 4 Oct 2019 16:27:27 +0200 +Subject: [PATCH] arm64: dts: marvell: Add AP807-quad cache description + +Adding appropriate entries to device-tree allows the cache description +to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/. + +Signed-off-by: Grzegorz Jaszczyk +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + .../boot/dts/marvell/armada-ap807-quad.dtsi | 42 +++++++++++++++++++ + 1 file changed, 42 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi +@@ -22,6 +22,13 @@ + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; ++ i-cache-size = <0xc000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <256>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <256>; ++ next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; +@@ -30,6 +37,13 @@ + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; ++ i-cache-size = <0xc000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <256>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <256>; ++ next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; +@@ -38,6 +52,13 @@ + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; ++ i-cache-size = <0xc000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <256>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <256>; ++ next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; +@@ -46,6 +67,27 @@ + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; ++ i-cache-size = <0xc000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <256>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <256>; ++ next-level-cache = <&l2_1>; ++ }; ++ ++ l2_0: l2-cache0 { ++ compatible = "cache"; ++ cache-size = <0x80000>; ++ cache-line-size = <64>; ++ cache-sets = <512>; ++ }; ++ ++ l2_1: l2-cache1 { ++ compatible = "cache"; ++ cache-size = <0x80000>; ++ cache-line-size = <64>; ++ cache-sets = <512>; + }; + }; + }; diff --git a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch b/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch new file mode 100644 index 0000000000..e06928d130 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch @@ -0,0 +1,135 @@ +From 1399672e48b573f6526b9ac78cfd50314f0b01a6 Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:30 +0200 +Subject: [PATCH] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file + +As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to +RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory +range. This shows that I/O memory has never been used/working on the +old SoCs despite the region being advertised. As PCIe I/O ranges will +not be supported in newer SoCs using CP11x co-processors, let's +simply drop them. It is not harmful in any case as PCIe device drivers +can do it all with the regular mapped memory anyway. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 2 -- + .../boot/dts/marvell/armada-8040-mcbin.dtsi | 3 +-- + arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 4 ---- + arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 16 +++------------- + 4 files changed, 4 insertions(+), 21 deletions(-) + +--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +@@ -19,7 +19,6 @@ + */ + #define CP11X_NAME cp0 + #define CP11X_BASE f2000000 +-#define CP11X_PCIE_IO_BASE 0xf9000000 + #define CP11X_PCIE_MEM_BASE 0xf6000000 + #define CP11X_PCIE0_BASE f2600000 + #define CP11X_PCIE1_BASE f2620000 +@@ -29,7 +28,6 @@ + + #undef CP11X_NAME + #undef CP11X_BASE +-#undef CP11X_PCIE_IO_BASE + #undef CP11X_PCIE_MEM_BASE + #undef CP11X_PCIE0_BASE + #undef CP11X_PCIE1_BASE +--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +@@ -179,8 +179,7 @@ + num-lanes = <4>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; +- ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 +- 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; ++ ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, + <&cp0_comphy2 0>, <&cp0_comphy3 0>; + phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", +--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +@@ -21,7 +21,6 @@ + */ + #define CP11X_NAME cp0 + #define CP11X_BASE f2000000 +-#define CP11X_PCIE_IO_BASE 0xf9000000 + #define CP11X_PCIE_MEM_BASE 0xf6000000 + #define CP11X_PCIE0_BASE f2600000 + #define CP11X_PCIE1_BASE f2620000 +@@ -31,7 +30,6 @@ + + #undef CP11X_NAME + #undef CP11X_BASE +-#undef CP11X_PCIE_IO_BASE + #undef CP11X_PCIE_MEM_BASE + #undef CP11X_PCIE0_BASE + #undef CP11X_PCIE1_BASE +@@ -42,7 +40,6 @@ + */ + #define CP11X_NAME cp1 + #define CP11X_BASE f4000000 +-#define CP11X_PCIE_IO_BASE 0xfd000000 + #define CP11X_PCIE_MEM_BASE 0xfa000000 + #define CP11X_PCIE0_BASE f4600000 + #define CP11X_PCIE1_BASE f4620000 +@@ -52,7 +49,6 @@ + + #undef CP11X_NAME + #undef CP11X_BASE +-#undef CP11X_PCIE_IO_BASE + #undef CP11X_PCIE_MEM_BASE + #undef CP11X_PCIE0_BASE + #undef CP11X_PCIE1_BASE +--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +@@ -10,7 +10,6 @@ + + #include "armada-common.dtsi" + +-#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000)) + #define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000)) + #define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000) + +@@ -507,11 +506,8 @@ + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; +- ranges = +- /* downstream I/O */ +- <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000 + /* non-prefetchable memory */ +- 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; ++ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; +@@ -534,11 +530,8 @@ + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; +- ranges = +- /* downstream I/O */ +- <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000 + /* non-prefetchable memory */ +- 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; ++ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; +@@ -562,11 +555,8 @@ + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; +- ranges = +- /* downstream I/O */ +- <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000 + /* non-prefetchable memory */ +- 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; ++ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; diff --git a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch b/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch new file mode 100644 index 0000000000..0dd9e8f90f --- /dev/null +++ b/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch @@ -0,0 +1,129 @@ +From 5f07b26e85dc86f017833ea745ff4e5b420280cd Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:31 +0200 +Subject: [PATCH] arm64: dts: marvell: Externalize PCIe macros from CP11x file + +PCIe macros are specific to CP110 and will not fit CP115 +constraints. To keep the same way the files are organized, just move +some macros out of the CP11x generic file and define them directly in +SoC DTSI, instead of defining single addresses in the SoC DTSI and +reusing them in macros. + +In the end: +* CP11X_PCIE_MEM_BASE SoC define is dropped +* CP11X_PCIEx_MEM_BASE is moved out of the generic DT to be put in the + SoC files as it replaces the above definition. +* As the CP11X_PCIEx_MEM_SIZE macro is also subject to change with + newer SoCs, we put it in the SoC files as well. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 6 ++++-- + arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 12 ++++++++---- + arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 9 ++++----- + 3 files changed, 16 insertions(+), 11 deletions(-) + +--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +@@ -19,7 +19,8 @@ + */ + #define CP11X_NAME cp0 + #define CP11X_BASE f2000000 +-#define CP11X_PCIE_MEM_BASE 0xf6000000 ++#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) ++#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 + #define CP11X_PCIE0_BASE f2600000 + #define CP11X_PCIE1_BASE f2620000 + #define CP11X_PCIE2_BASE f2640000 +@@ -28,7 +29,8 @@ + + #undef CP11X_NAME + #undef CP11X_BASE +-#undef CP11X_PCIE_MEM_BASE ++#undef CP11X_PCIEx_MEM_BASE ++#undef CP11X_PCIEx_MEM_SIZE + #undef CP11X_PCIE0_BASE + #undef CP11X_PCIE1_BASE + #undef CP11X_PCIE2_BASE +--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +@@ -21,7 +21,8 @@ + */ + #define CP11X_NAME cp0 + #define CP11X_BASE f2000000 +-#define CP11X_PCIE_MEM_BASE 0xf6000000 ++#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) ++#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 + #define CP11X_PCIE0_BASE f2600000 + #define CP11X_PCIE1_BASE f2620000 + #define CP11X_PCIE2_BASE f2640000 +@@ -30,7 +31,8 @@ + + #undef CP11X_NAME + #undef CP11X_BASE +-#undef CP11X_PCIE_MEM_BASE ++#undef CP11X_PCIEx_MEM_BASE ++#undef CP11X_PCIEx_MEM_SIZE + #undef CP11X_PCIE0_BASE + #undef CP11X_PCIE1_BASE + #undef CP11X_PCIE2_BASE +@@ -40,7 +42,8 @@ + */ + #define CP11X_NAME cp1 + #define CP11X_BASE f4000000 +-#define CP11X_PCIE_MEM_BASE 0xfa000000 ++#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) ++#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 + #define CP11X_PCIE0_BASE f4600000 + #define CP11X_PCIE1_BASE f4620000 + #define CP11X_PCIE2_BASE f4640000 +@@ -49,7 +52,8 @@ + + #undef CP11X_NAME + #undef CP11X_BASE +-#undef CP11X_PCIE_MEM_BASE ++#undef CP11X_PCIEx_MEM_BASE ++#undef CP11X_PCIEx_MEM_SIZE + #undef CP11X_PCIE0_BASE + #undef CP11X_PCIE1_BASE + #undef CP11X_PCIE2_BASE +--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +@@ -10,8 +10,7 @@ + + #include "armada-common.dtsi" + +-#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000)) +-#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000) ++#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) + + / { + /* +@@ -507,7 +506,7 @@ + + bus-range = <0 0xff>; + /* non-prefetchable memory */ +- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; ++ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; +@@ -531,7 +530,7 @@ + + bus-range = <0 0xff>; + /* non-prefetchable memory */ +- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; ++ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; +@@ -556,7 +555,7 @@ + + bus-range = <0 0xff>; + /* non-prefetchable memory */ +- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; ++ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; diff --git a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch b/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch new file mode 100644 index 0000000000..c191b3f7df --- /dev/null +++ b/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch @@ -0,0 +1,25 @@ +From 2d6ebaa98be1dd265aa6d99a00c150f1f9f2ea66 Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:18 +0200 +Subject: [PATCH] arm64: dts: marvell: Enumerate the first AP806 syscon + +There are two system controllers in the AP80x, like for ap_syscon1, +enumerate the first one by renaming it s/ap_syscon/ap_syscon0/. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +@@ -246,7 +246,7 @@ + status = "disabled"; + }; + +- ap_syscon: system-controller@6f4000 { ++ ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + diff --git a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch b/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch new file mode 100644 index 0000000000..bb7863cb5f --- /dev/null +++ b/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch @@ -0,0 +1,937 @@ +From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00 2001 +From: Konstantin Porotchkin +Date: Fri, 4 Oct 2019 16:27:22 +0200 +Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of AP807 based + SoCs + +Prepare the support for Marvell AP807 die. This die is very similar to +AP806 but uses different DDR PHY. AP807 is a major component of CN9130 +SoC series. + +Signed-off-by: Konstantin Porotchkin +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +---------------- + arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456 ++++++++++++++++++ + 2 files changed, 458 insertions(+), 446 deletions(-) + create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi + +--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +@@ -5,454 +5,10 @@ + * Device Tree file for Marvell Armada AP806. + */ + +-#include +-#include +- +-/dts-v1/; ++#define AP_NAME ap806 ++#include "armada-ap80x.dtsi" + + / { + model = "Marvell Armada AP806"; + compatible = "marvell,armada-ap806"; +- #address-cells = <2>; +- #size-cells = <2>; +- +- aliases { +- serial0 = &uart0; +- serial1 = &uart1; +- gpio0 = &ap_gpio; +- spi0 = &spi0; +- }; +- +- psci { +- compatible = "arm,psci-0.2"; +- method = "smc"; +- }; +- +- reserved-memory { +- #address-cells = <2>; +- #size-cells = <2>; +- ranges; +- +- /* +- * This area matches the mapping done with a +- * mainline U-Boot, and should be updated by the +- * bootloader. +- */ +- +- psci-area@4000000 { +- reg = <0x0 0x4000000 0x0 0x200000>; +- no-map; +- }; +- }; +- +- ap806 { +- #address-cells = <2>; +- #size-cells = <2>; +- compatible = "simple-bus"; +- interrupt-parent = <&gic>; +- ranges; +- +- config-space@f0000000 { +- #address-cells = <1>; +- #size-cells = <1>; +- compatible = "simple-bus"; +- ranges = <0x0 0x0 0xf0000000 0x1000000>; +- +- gic: interrupt-controller@210000 { +- compatible = "arm,gic-400"; +- #interrupt-cells = <3>; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges; +- interrupt-controller; +- interrupts = ; +- reg = <0x210000 0x10000>, +- <0x220000 0x20000>, +- <0x240000 0x20000>, +- <0x260000 0x20000>; +- +- gic_v2m0: v2m@280000 { +- compatible = "arm,gic-v2m-frame"; +- msi-controller; +- reg = <0x280000 0x1000>; +- arm,msi-base-spi = <160>; +- arm,msi-num-spis = <32>; +- }; +- gic_v2m1: v2m@290000 { +- compatible = "arm,gic-v2m-frame"; +- msi-controller; +- reg = <0x290000 0x1000>; +- arm,msi-base-spi = <192>; +- arm,msi-num-spis = <32>; +- }; +- gic_v2m2: v2m@2a0000 { +- compatible = "arm,gic-v2m-frame"; +- msi-controller; +- reg = <0x2a0000 0x1000>; +- arm,msi-base-spi = <224>; +- arm,msi-num-spis = <32>; +- }; +- gic_v2m3: v2m@2b0000 { +- compatible = "arm,gic-v2m-frame"; +- msi-controller; +- reg = <0x2b0000 0x1000>; +- arm,msi-base-spi = <256>; +- arm,msi-num-spis = <32>; +- }; +- }; +- +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = , +- , +- , +- ; +- }; +- +- pmu { +- compatible = "arm,cortex-a72-pmu"; +- interrupt-parent = <&pic>; +- interrupts = <17>; +- }; +- +- odmi: odmi@300000 { +- compatible = "marvell,odmi-controller"; +- interrupt-controller; +- msi-controller; +- marvell,odmi-frames = <4>; +- reg = <0x300000 0x4000>, +- <0x304000 0x4000>, +- <0x308000 0x4000>, +- <0x30C000 0x4000>; +- marvell,spi-base = <128>, <136>, <144>, <152>; +- }; +- +- gicp: gicp@3f0040 { +- compatible = "marvell,ap806-gicp"; +- reg = <0x3f0040 0x10>; +- marvell,spi-ranges = <64 64>, <288 64>; +- msi-controller; +- }; +- +- pic: interrupt-controller@3f0100 { +- compatible = "marvell,armada-8k-pic"; +- reg = <0x3f0100 0x10>; +- #interrupt-cells = <1>; +- interrupt-controller; +- interrupts = ; +- }; +- +- sei: interrupt-controller@3f0200 { +- compatible = "marvell,ap806-sei"; +- reg = <0x3f0200 0x40>; +- interrupts = ; +- #interrupt-cells = <1>; +- interrupt-controller; +- msi-controller; +- }; +- +- xor@400000 { +- compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; +- reg = <0x400000 0x1000>, +- <0x410000 0x1000>; +- msi-parent = <&gic_v2m0>; +- clocks = <&ap_clk 3>; +- dma-coherent; +- }; +- +- xor@420000 { +- compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; +- reg = <0x420000 0x1000>, +- <0x430000 0x1000>; +- msi-parent = <&gic_v2m0>; +- clocks = <&ap_clk 3>; +- dma-coherent; +- }; +- +- xor@440000 { +- compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; +- reg = <0x440000 0x1000>, +- <0x450000 0x1000>; +- msi-parent = <&gic_v2m0>; +- clocks = <&ap_clk 3>; +- dma-coherent; +- }; +- +- xor@460000 { +- compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; +- reg = <0x460000 0x1000>, +- <0x470000 0x1000>; +- msi-parent = <&gic_v2m0>; +- clocks = <&ap_clk 3>; +- dma-coherent; +- }; +- +- spi0: spi@510600 { +- compatible = "marvell,armada-380-spi"; +- reg = <0x510600 0x50>; +- #address-cells = <1>; +- #size-cells = <0>; +- interrupts = ; +- clocks = <&ap_clk 3>; +- status = "disabled"; +- }; +- +- i2c0: i2c@511000 { +- compatible = "marvell,mv78230-i2c"; +- reg = <0x511000 0x20>; +- #address-cells = <1>; +- #size-cells = <0>; +- interrupts = ; +- timeout-ms = <1000>; +- clocks = <&ap_clk 3>; +- status = "disabled"; +- }; +- +- uart0: serial@512000 { +- compatible = "snps,dw-apb-uart"; +- reg = <0x512000 0x100>; +- reg-shift = <2>; +- interrupts = ; +- reg-io-width = <1>; +- clocks = <&ap_clk 3>; +- status = "disabled"; +- }; +- +- uart1: serial@512100 { +- compatible = "snps,dw-apb-uart"; +- reg = <0x512100 0x100>; +- reg-shift = <2>; +- interrupts = ; +- reg-io-width = <1>; +- clocks = <&ap_clk 3>; +- status = "disabled"; +- +- }; +- +- watchdog: watchdog@610000 { +- compatible = "arm,sbsa-gwdt"; +- reg = <0x610000 0x1000>, <0x600000 0x1000>; +- interrupts = ; +- }; +- +- ap_sdhci0: sdhci@6e0000 { +- compatible = "marvell,armada-ap806-sdhci"; +- reg = <0x6e0000 0x300>; +- interrupts = ; +- clock-names = "core"; +- clocks = <&ap_clk 4>; +- dma-coherent; +- marvell,xenon-phy-slow-mode; +- status = "disabled"; +- }; +- +- ap_syscon0: system-controller@6f4000 { +- compatible = "syscon", "simple-mfd"; +- reg = <0x6f4000 0x2000>; +- +- ap_clk: clock { +- compatible = "marvell,ap806-clock"; +- #clock-cells = <1>; +- }; +- +- ap_pinctrl: pinctrl { +- compatible = "marvell,ap806-pinctrl"; +- +- uart0_pins: uart0-pins { +- marvell,pins = "mpp11", "mpp19"; +- marvell,function = "uart0"; +- }; +- }; +- +- ap_gpio: gpio@1040 { +- compatible = "marvell,armada-8k-gpio"; +- offset = <0x1040>; +- ngpios = <20>; +- gpio-controller; +- #gpio-cells = <2>; +- gpio-ranges = <&ap_pinctrl 0 0 20>; +- }; +- }; +- +- ap_syscon1: system-controller@6f8000 { +- compatible = "syscon", "simple-mfd"; +- reg = <0x6f8000 0x1000>; +- #address-cells = <1>; +- #size-cells = <1>; +- +- cpu_clk: clock-cpu@278 { +- compatible = "marvell,ap806-cpu-clock"; +- clocks = <&ap_clk 0>, <&ap_clk 1>; +- #clock-cells = <1>; +- reg = <0x278 0xa30>; +- }; +- +- ap_thermal: thermal-sensor@80 { +- compatible = "marvell,armada-ap806-thermal"; +- reg = <0x80 0x10>; +- interrupt-parent = <&sei>; +- interrupts = <18>; +- #thermal-sensor-cells = <1>; +- }; +- }; +- }; +- }; +- +- /* +- * The thermal IP features one internal sensor plus, if applicable, one +- * remote channel wired to one sensor per CPU. +- * +- * Only one thermal zone per AP/CP may trigger interrupts at a time, the +- * first one that will have a critical trip point will be chosen. +- */ +- thermal-zones { +- ap_thermal_ic: ap-thermal-ic { +- polling-delay-passive = <0>; /* Interrupt driven */ +- polling-delay = <0>; /* Interrupt driven */ +- +- thermal-sensors = <&ap_thermal 0>; +- +- trips { +- ap_crit: ap-crit { +- temperature = <100000>; /* mC degrees */ +- hysteresis = <2000>; /* mC degrees */ +- type = "critical"; +- }; +- }; +- +- cooling-maps { }; +- }; +- +- ap_thermal_cpu0: ap-thermal-cpu0 { +- polling-delay-passive = <1000>; +- polling-delay = <1000>; +- +- thermal-sensors = <&ap_thermal 1>; +- +- trips { +- cpu0_hot: cpu0-hot { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- cpu0_emerg: cpu0-emerg { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- }; +- +- cooling-maps { +- map0_hot: map0-hot { +- trip = <&cpu0_hot>; +- cooling-device = <&cpu0 1 2>, +- <&cpu1 1 2>; +- }; +- map0_emerg: map0-ermerg { +- trip = <&cpu0_emerg>; +- cooling-device = <&cpu0 3 3>, +- <&cpu1 3 3>; +- }; +- }; +- }; +- +- ap_thermal_cpu1: ap-thermal-cpu1 { +- polling-delay-passive = <1000>; +- polling-delay = <1000>; +- +- thermal-sensors = <&ap_thermal 2>; +- +- trips { +- cpu1_hot: cpu1-hot { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- cpu1_emerg: cpu1-emerg { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- }; +- +- cooling-maps { +- map1_hot: map1-hot { +- trip = <&cpu1_hot>; +- cooling-device = <&cpu0 1 2>, +- <&cpu1 1 2>; +- }; +- map1_emerg: map1-emerg { +- trip = <&cpu1_emerg>; +- cooling-device = <&cpu0 3 3>, +- <&cpu1 3 3>; +- }; +- }; +- }; +- +- ap_thermal_cpu2: ap-thermal-cpu2 { +- polling-delay-passive = <1000>; +- polling-delay = <1000>; +- +- thermal-sensors = <&ap_thermal 3>; +- +- trips { +- cpu2_hot: cpu2-hot { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- cpu2_emerg: cpu2-emerg { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- }; +- +- cooling-maps { +- map2_hot: map2-hot { +- trip = <&cpu2_hot>; +- cooling-device = <&cpu2 1 2>, +- <&cpu3 1 2>; +- }; +- map2_emerg: map2-emerg { +- trip = <&cpu2_emerg>; +- cooling-device = <&cpu2 3 3>, +- <&cpu3 3 3>; +- }; +- }; +- }; +- +- ap_thermal_cpu3: ap-thermal-cpu3 { +- polling-delay-passive = <1000>; +- polling-delay = <1000>; +- +- thermal-sensors = <&ap_thermal 4>; +- +- trips { +- cpu3_hot: cpu3-hot { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- cpu3_emerg: cpu3-emerg { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- }; +- +- cooling-maps { +- map3_hot: map3-bhot { +- trip = <&cpu3_hot>; +- cooling-device = <&cpu2 1 2>, +- <&cpu3 1 2>; +- }; +- map3_emerg: map3-emerg { +- trip = <&cpu3_emerg>; +- cooling-device = <&cpu2 3 3>, +- <&cpu3 3 3>; +- }; +- }; +- }; +- }; + }; +--- /dev/null ++++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +@@ -0,0 +1,456 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2019 Marvell Technology Group Ltd. ++ * ++ * Device Tree file for Marvell Armada AP80x. ++ */ ++ ++#include ++#include ++ ++/dts-v1/; ++ ++/ { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ aliases { ++ serial0 = &uart0; ++ serial1 = &uart1; ++ gpio0 = &ap_gpio; ++ spi0 = &spi0; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ /* ++ * This area matches the mapping done with a ++ * mainline U-Boot, and should be updated by the ++ * bootloader. ++ */ ++ ++ psci-area@4000000 { ++ reg = <0x0 0x4000000 0x0 0x200000>; ++ no-map; ++ }; ++ }; ++ ++ AP_NAME { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ compatible = "simple-bus"; ++ interrupt-parent = <&gic>; ++ ranges; ++ ++ config-space@f0000000 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "simple-bus"; ++ ranges = <0x0 0x0 0xf0000000 0x1000000>; ++ ++ gic: interrupt-controller@210000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ interrupt-controller; ++ interrupts = ; ++ reg = <0x210000 0x10000>, ++ <0x220000 0x20000>, ++ <0x240000 0x20000>, ++ <0x260000 0x20000>; ++ ++ gic_v2m0: v2m@280000 { ++ compatible = "arm,gic-v2m-frame"; ++ msi-controller; ++ reg = <0x280000 0x1000>; ++ arm,msi-base-spi = <160>; ++ arm,msi-num-spis = <32>; ++ }; ++ gic_v2m1: v2m@290000 { ++ compatible = "arm,gic-v2m-frame"; ++ msi-controller; ++ reg = <0x290000 0x1000>; ++ arm,msi-base-spi = <192>; ++ arm,msi-num-spis = <32>; ++ }; ++ gic_v2m2: v2m@2a0000 { ++ compatible = "arm,gic-v2m-frame"; ++ msi-controller; ++ reg = <0x2a0000 0x1000>; ++ arm,msi-base-spi = <224>; ++ arm,msi-num-spis = <32>; ++ }; ++ gic_v2m3: v2m@2b0000 { ++ compatible = "arm,gic-v2m-frame"; ++ msi-controller; ++ reg = <0x2b0000 0x1000>; ++ arm,msi-base-spi = <256>; ++ arm,msi-num-spis = <32>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu { ++ compatible = "arm,cortex-a72-pmu"; ++ interrupt-parent = <&pic>; ++ interrupts = <17>; ++ }; ++ ++ odmi: odmi@300000 { ++ compatible = "marvell,odmi-controller"; ++ interrupt-controller; ++ msi-controller; ++ marvell,odmi-frames = <4>; ++ reg = <0x300000 0x4000>, ++ <0x304000 0x4000>, ++ <0x308000 0x4000>, ++ <0x30C000 0x4000>; ++ marvell,spi-base = <128>, <136>, <144>, <152>; ++ }; ++ ++ gicp: gicp@3f0040 { ++ compatible = "marvell,ap806-gicp"; ++ reg = <0x3f0040 0x10>; ++ marvell,spi-ranges = <64 64>, <288 64>; ++ msi-controller; ++ }; ++ ++ pic: interrupt-controller@3f0100 { ++ compatible = "marvell,armada-8k-pic"; ++ reg = <0x3f0100 0x10>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ interrupts = ; ++ }; ++ ++ sei: interrupt-controller@3f0200 { ++ compatible = "marvell,ap806-sei"; ++ reg = <0x3f0200 0x40>; ++ interrupts = ; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ msi-controller; ++ }; ++ ++ xor@400000 { ++ compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; ++ reg = <0x400000 0x1000>, ++ <0x410000 0x1000>; ++ msi-parent = <&gic_v2m0>; ++ clocks = <&ap_clk 3>; ++ dma-coherent; ++ }; ++ ++ xor@420000 { ++ compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; ++ reg = <0x420000 0x1000>, ++ <0x430000 0x1000>; ++ msi-parent = <&gic_v2m0>; ++ clocks = <&ap_clk 3>; ++ dma-coherent; ++ }; ++ ++ xor@440000 { ++ compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; ++ reg = <0x440000 0x1000>, ++ <0x450000 0x1000>; ++ msi-parent = <&gic_v2m0>; ++ clocks = <&ap_clk 3>; ++ dma-coherent; ++ }; ++ ++ xor@460000 { ++ compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; ++ reg = <0x460000 0x1000>, ++ <0x470000 0x1000>; ++ msi-parent = <&gic_v2m0>; ++ clocks = <&ap_clk 3>; ++ dma-coherent; ++ }; ++ ++ spi0: spi@510600 { ++ compatible = "marvell,armada-380-spi"; ++ reg = <0x510600 0x50>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = ; ++ clocks = <&ap_clk 3>; ++ status = "disabled"; ++ }; ++ ++ i2c0: i2c@511000 { ++ compatible = "marvell,mv78230-i2c"; ++ reg = <0x511000 0x20>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = ; ++ timeout-ms = <1000>; ++ clocks = <&ap_clk 3>; ++ status = "disabled"; ++ }; ++ ++ uart0: serial@512000 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x512000 0x100>; ++ reg-shift = <2>; ++ interrupts = ; ++ reg-io-width = <1>; ++ clocks = <&ap_clk 3>; ++ status = "disabled"; ++ }; ++ ++ uart1: serial@512100 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x512100 0x100>; ++ reg-shift = <2>; ++ interrupts = ; ++ reg-io-width = <1>; ++ clocks = <&ap_clk 3>; ++ status = "disabled"; ++ ++ }; ++ ++ watchdog: watchdog@610000 { ++ compatible = "arm,sbsa-gwdt"; ++ reg = <0x610000 0x1000>, <0x600000 0x1000>; ++ interrupts = ; ++ }; ++ ++ ap_sdhci0: sdhci@6e0000 { ++ compatible = "marvell,armada-ap806-sdhci"; ++ reg = <0x6e0000 0x300>; ++ interrupts = ; ++ clock-names = "core"; ++ clocks = <&ap_clk 4>; ++ dma-coherent; ++ marvell,xenon-phy-slow-mode; ++ status = "disabled"; ++ }; ++ ++ ap_syscon0: system-controller@6f4000 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x6f4000 0x2000>; ++ ++ ap_clk: clock { ++ compatible = "marvell,ap806-clock"; ++ #clock-cells = <1>; ++ }; ++ ++ ap_pinctrl: pinctrl { ++ compatible = "marvell,ap806-pinctrl"; ++ ++ uart0_pins: uart0-pins { ++ marvell,pins = "mpp11", "mpp19"; ++ marvell,function = "uart0"; ++ }; ++ }; ++ ++ ap_gpio: gpio@1040 { ++ compatible = "marvell,armada-8k-gpio"; ++ offset = <0x1040>; ++ ngpios = <20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-ranges = <&ap_pinctrl 0 0 20>; ++ }; ++ }; ++ ++ ap_syscon1: system-controller@6f8000 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x6f8000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cpu_clk: clock-cpu@278 { ++ compatible = "marvell,ap806-cpu-clock"; ++ clocks = <&ap_clk 0>, <&ap_clk 1>; ++ #clock-cells = <1>; ++ reg = <0x278 0xa30>; ++ }; ++ ++ ap_thermal: thermal-sensor@80 { ++ compatible = "marvell,armada-ap806-thermal"; ++ reg = <0x80 0x10>; ++ interrupt-parent = <&sei>; ++ interrupts = <18>; ++ #thermal-sensor-cells = <1>; ++ }; ++ }; ++ }; ++ }; ++ ++ /* ++ * The thermal IP features one internal sensor plus, if applicable, one ++ * remote channel wired to one sensor per CPU. ++ * ++ * Only one thermal zone per AP/CP may trigger interrupts at a time, the ++ * first one that will have a critical trip point will be chosen. ++ */ ++ thermal-zones { ++ ap_thermal_ic: ap-thermal-ic { ++ polling-delay-passive = <0>; /* Interrupt driven */ ++ polling-delay = <0>; /* Interrupt driven */ ++ ++ thermal-sensors = <&ap_thermal 0>; ++ ++ trips { ++ ap_crit: ap-crit { ++ temperature = <100000>; /* mC degrees */ ++ hysteresis = <2000>; /* mC degrees */ ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { }; ++ }; ++ ++ ap_thermal_cpu0: ap-thermal-cpu0 { ++ polling-delay-passive = <1000>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&ap_thermal 1>; ++ ++ trips { ++ cpu0_hot: cpu0-hot { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ cpu0_emerg: cpu0-emerg { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0_hot: map0-hot { ++ trip = <&cpu0_hot>; ++ cooling-device = <&cpu0 1 2>, ++ <&cpu1 1 2>; ++ }; ++ map0_emerg: map0-ermerg { ++ trip = <&cpu0_emerg>; ++ cooling-device = <&cpu0 3 3>, ++ <&cpu1 3 3>; ++ }; ++ }; ++ }; ++ ++ ap_thermal_cpu1: ap-thermal-cpu1 { ++ polling-delay-passive = <1000>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&ap_thermal 2>; ++ ++ trips { ++ cpu1_hot: cpu1-hot { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ cpu1_emerg: cpu1-emerg { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ }; ++ ++ cooling-maps { ++ map1_hot: map1-hot { ++ trip = <&cpu1_hot>; ++ cooling-device = <&cpu0 1 2>, ++ <&cpu1 1 2>; ++ }; ++ map1_emerg: map1-emerg { ++ trip = <&cpu1_emerg>; ++ cooling-device = <&cpu0 3 3>, ++ <&cpu1 3 3>; ++ }; ++ }; ++ }; ++ ++ ap_thermal_cpu2: ap-thermal-cpu2 { ++ polling-delay-passive = <1000>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&ap_thermal 3>; ++ ++ trips { ++ cpu2_hot: cpu2-hot { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ cpu2_emerg: cpu2-emerg { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ }; ++ ++ cooling-maps { ++ map2_hot: map2-hot { ++ trip = <&cpu2_hot>; ++ cooling-device = <&cpu2 1 2>, ++ <&cpu3 1 2>; ++ }; ++ map2_emerg: map2-emerg { ++ trip = <&cpu2_emerg>; ++ cooling-device = <&cpu2 3 3>, ++ <&cpu3 3 3>; ++ }; ++ }; ++ }; ++ ++ ap_thermal_cpu3: ap-thermal-cpu3 { ++ polling-delay-passive = <1000>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&ap_thermal 4>; ++ ++ trips { ++ cpu3_hot: cpu3-hot { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ cpu3_emerg: cpu3-emerg { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ }; ++ ++ cooling-maps { ++ map3_hot: map3-bhot { ++ trip = <&cpu3_hot>; ++ cooling-device = <&cpu2 1 2>, ++ <&cpu3 1 2>; ++ }; ++ map3_emerg: map3-emerg { ++ trip = <&cpu3_emerg>; ++ cooling-device = <&cpu2 3 3>, ++ <&cpu3 3 3>; ++ }; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch b/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch new file mode 100644 index 0000000000..38965dd9e5 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch @@ -0,0 +1,65 @@ +From 4f267f2a806b556678b84c4d80c2f4bff8d000d9 Mon Sep 17 00:00:00 2001 +From: Miquel Raynal +Date: Fri, 4 Oct 2019 16:27:23 +0200 +Subject: [PATCH] arm64: dts: marvell: Move clocks to AP806 specific file + +Regular clocks and CPU clocks are specific to AP806, move them out of +the generic AP80x file so that AP807 can use its own clocks. + +Signed-off-by: Miquel Raynal +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++ + arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------ + 2 files changed, 16 insertions(+), 12 deletions(-) + +--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +@@ -12,3 +12,19 @@ + model = "Marvell Armada AP806"; + compatible = "marvell,armada-ap806"; + }; ++ ++&ap_syscon0 { ++ ap_clk: clock { ++ compatible = "marvell,ap806-clock"; ++ #clock-cells = <1>; ++ }; ++}; ++ ++&ap_syscon1 { ++ cpu_clk: clock-cpu@278 { ++ compatible = "marvell,ap806-cpu-clock"; ++ clocks = <&ap_clk 0>, <&ap_clk 1>; ++ #clock-cells = <1>; ++ reg = <0x278 0xa30>; ++ }; ++}; +--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +@@ -248,11 +248,6 @@ + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + +- ap_clk: clock { +- compatible = "marvell,ap806-clock"; +- #clock-cells = <1>; +- }; +- + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + +@@ -278,13 +273,6 @@ + #address-cells = <1>; + #size-cells = <1>; + +- cpu_clk: clock-cpu@278 { +- compatible = "marvell,ap806-cpu-clock"; +- clocks = <&ap_clk 0>, <&ap_clk 1>; +- #clock-cells = <1>; +- reg = <0x278 0xa30>; +- }; +- + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; -- cgit v1.2.3