From a1f0fd8cba4d9233b76542fbf54be01e2cc9d5c0 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Thu, 14 May 2020 15:16:57 +0200 Subject: ramips: use DT trigger for 2G WiFi on ASUS RT-AC51U Like for the RT-AC54U, this uses a DT trigger for WiFi also at the RT-AC51U. While at it, rename node and label to wifi2g. Note that the 5g WiFi LED still isn't supported (see PR #3017 for further details: https://github.com/openwrt/openwrt/pull/3017 ) Tested-by: Davide Fioravanti Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts | 5 +++-- target/linux/ramips/mt7620/base-files/etc/board.d/01_leds | 11 +++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts b/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts index 4c98c85dee..1dd0e5cfe0 100644 --- a/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts +++ b/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts @@ -28,9 +28,10 @@ linux,default-trigger = "usbport"; }; - wifi { - label = "rt-ac51u:blue:wifi"; + wifi2g { + label = "rt-ac51u:blue:wifi2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; }; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index d332e02bbd..c1deae59e3 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -47,12 +47,6 @@ asus,rt-n14u) ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2 set_wifi_led "$boardname:blue:air" ;; -asus,rt-ac51u|\ -kingston,mlw221|\ -kingston,mlwg2|\ -sanlinking,d240) - set_wifi_led "$boardname:blue:wifi" - ;; bdcom,wap2100-sk) set_wifi_led "$boardname:green:wlan2g" ;; @@ -139,6 +133,11 @@ kimax,u35wf) set_wifi_led "$boardname:blue:wifi" ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" ;; +kingston,mlw221|\ +kingston,mlwg2|\ +sanlinking,d240) + set_wifi_led "$boardname:blue:wifi" + ;; lava,lr-25g001) ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1" ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0" -- cgit v1.2.3