From 800da21cb1b554ee66e0cafd9e946401b62b9105 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 29 Jan 2013 22:50:50 +0000 Subject: ar71xx: add kernel support for dir-825-c1 [juhosg: - remove unused GPIO stuff - use a separate kernel patch for machine integration] Signed-off-by: Alexander Stadler Signed-off-by: Gabor Juhos SVN-Revision: 35401 --- target/linux/ar71xx/config-3.7 | 1 + .../ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c | 189 +++++++++++++++++++++ .../612-MIPS-ath79-add-DIR-825-C1-support.patch | 40 +++++ 3 files changed, 230 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c create mode 100644 target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch diff --git a/target/linux/ar71xx/config-3.7 b/target/linux/ar71xx/config-3.7 index e396dfbe00..11498c5859 100644 --- a/target/linux/ar71xx/config-3.7 +++ b/target/linux/ar71xx/config-3.7 @@ -39,6 +39,7 @@ CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y CONFIG_ATH79_MACH_DIR_825_B1=y +CONFIG_ATH79_MACH_DIR_825_C1=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_HORNET_UB=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c new file mode 100644 index 0000000000..4d140bbfc4 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c @@ -0,0 +1,189 @@ +/* + * D-Link DIR-825 rev. C1 board support + * + * Copyright (C) 2013 Alexander Stadler + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DIR825C1_GPIO_LED_BLUE_USB 11 +#define DIR825C1_GPIO_LED_ORANGE_POWER 15 +#define DIR825C1_GPIO_LED_BLUE_POWER 14 +#define DIR825C1_GPIO_LED_ORANGE_PLANET 19 +#define DIR825C1_GPIO_LED_BLUE_PLANET 18 + +#define DIR825C1_GPIO_BTN_RESET 17 +#define DIR825C1_GPIO_BTN_WPS 16 + + +#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL) + +#define DIR825C1_MAC0_OFFSET 0x4 +#define DIR825C1_MAC1_OFFSET 0x18 +#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000 +#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led dir825c1_leds_gpio[] __initdata = { + { + .name = "d-link:blue:usb", + .gpio = DIR825C1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, { + .name = "d-link:orange:power", + .gpio = DIR825C1_GPIO_LED_ORANGE_POWER, + .active_low = 1, + }, { + .name = "d-link:blue:power", + .gpio = DIR825C1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, { + .name = "d-link:orange:planet", + .gpio = DIR825C1_GPIO_LED_ORANGE_PLANET, + .active_low = 1, + }, { + .name = "d-link:blue:planet", + .gpio = DIR825C1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825C1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825C1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = { + .led_ctrl0 = 0xc737c737, + .led_ctrl1 = 0x00000000, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x0030c300, + .open_drain = false, +}; + +static struct ar8327_platform_data dir825c1_ar8327_data = { + .pad0_cfg = &dir825c1_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &dir825c1_ar8327_led_cfg, +}; + +static struct mdio_board_info dir825c1_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dir825c1_ar8327_data, + }, +}; + +static void dir825c1_read_ascii_mac(u8 *dest, u8 *src) +{ + int ret; + + ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &dest[0], &dest[1], &dest[2], + &dest[3], &dest[4], &dest[5]); + + if (ret != ETH_ALEN) + memset(dest, 0, ETH_ALEN); +} + +static void __init dir825c1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; + + dir825c1_read_ascii_mac(mac1, mac + DIR825C1_MAC0_OFFSET); + dir825c1_read_ascii_mac(mac2, mac + DIR825C1_MAC1_OFFSET); + + ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, AR934X_GPIO_OUT_GPIO); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio), + dir825c1_leds_gpio); + ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir825c1_gpio_keys), + dir825c1_gpio_keys); + + ap9x_pci_setup_wmac_led_pin(0, 13); + ap9x_pci_setup_wmac_led_pin(1, 32); + + ath79_init_mac(tmpmac, mac1, 0); + ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, tmpmac); + + ath79_init_mac(tmpmac, mac2, 0); + ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, tmpmac); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + mdiobus_register_board_info(dir825c1_mdio0_info, + ARRAY_SIZE(dir825c1_mdio0_info)); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + + /* GMAC0 is connected to an AR8327N switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); + + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1", + "D-Link DIR-825 rev. C1", + dir825c1_setup); diff --git a/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch b/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch new file mode 100644 index 0000000000..3e6d17f580 --- /dev/null +++ b/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -39,6 +39,7 @@ enum ath79_mach_type { + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ + ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ ++ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ + ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ + ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1 + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + ++config ATH79_MACH_DIR_825_C1 ++ bool "D-Link DIR-825 rev. C1 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_EW_DORIN + bool "embedded wireless Dorin Platform support" + select SOC_AR933X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_DB120) += mach- + obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o + obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o ++obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o + obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o + obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o + obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o -- cgit v1.2.3