From 664c20dbce12b75244dc079fe7a0493f75b2713f Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Wed, 16 Mar 2005 13:50:00 +0000 Subject: add all source code from linksys/broadcom which is free, to cvs for better maintainence inside openwrt. this gives us the ability to better support different hardware models, without changing any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@379 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/linux/kernel-patches/001-Makefile.bz2 | Bin 854 -> 807 bytes .../linux/kernel-patches/020-drivers_mtd-jumbo.bz2 | Bin 9300 -> 1599 bytes .../kernel-patches/022-drivers_net_Makefile.bz2 | Bin 518 -> 528 bytes .../kernel-patches/023-drivers_net_et-hnd.bz2 | Bin 818 -> 0 bytes .../kernel-patches/025-drivers_net_hnd-hnd.bz2 | Bin 1639 -> 0 bytes .../kernel-patches/026-drivers_net_wl-hnd.bz2 | Bin 1119 -> 0 bytes .../kernel-patches/028-drivers_pcmcia_Makefile.bz2 | Bin 0 -> 483 bytes .../kernel-patches/028-drivers_pcmcia_jumbo.bz2 | Bin 9769 -> 0 bytes ...1-arch_mips_brcm-boards_bcm947xx_compressed.bz2 | Bin 11127 -> 0 bytes .../kernel-patches/104-drivers_net_diag-mbm.bz2 | Bin 1892 -> 0 bytes .../kernel-patches/105-makefile-mkdep-fix.bz2 | Bin 445 -> 0 bytes .../linux/kernel-patches/400-bcm947xx-openwrt.bz2 | Bin 1765 -> 0 bytes .../arch/mips/brcm-boards/bcm947xx/Makefile | 23 + .../mips/brcm-boards/bcm947xx/compressed/Makefile | 100 + .../brcm-boards/bcm947xx/compressed/README.mjn3 | 20 + .../mips/brcm-boards/bcm947xx/compressed/data.lds | 1 + .../bcm947xx/compressed/decompress_bunzip2.c | 758 +++++++ .../bcm947xx/compressed/decompress_bunzip2.lds | 17 + .../bcm947xx/compressed/decompress_bunzip2.lds.in | 17 + .../mips/brcm-boards/bcm947xx/compressed/head.S | 26 + .../brcm-boards/bcm947xx/compressed/vmlinux.lds | 17 + .../brcm-boards/bcm947xx/compressed/vmlinux.lds.in | 17 + .../arch/mips/brcm-boards/bcm947xx/gpio.c | 158 ++ .../arch/mips/brcm-boards/bcm947xx/nvram.c | 317 +++ .../arch/mips/brcm-boards/bcm947xx/nvram_linux.c | 638 ++++++ .../arch/mips/brcm-boards/bcm947xx/pcibios.c | 352 ++++ .../arch/mips/brcm-boards/bcm947xx/perfcntr.c | 67 + .../arch/mips/brcm-boards/bcm947xx/prom.c | 41 + .../arch/mips/brcm-boards/bcm947xx/sbmips.c | 951 +++++++++ .../arch/mips/brcm-boards/bcm947xx/sbpci.c | 563 +++++ .../arch/mips/brcm-boards/bcm947xx/setup.c | 251 +++ .../arch/mips/brcm-boards/bcm947xx/sflash.c | 346 ++++ .../arch/mips/brcm-boards/bcm947xx/time.c | 117 ++ .../arch/mips/brcm-boards/generic/Makefile | 26 + .../arch/mips/brcm-boards/generic/gdb_hook.c | 120 ++ .../arch/mips/brcm-boards/generic/int-handler.S | 51 + .../arch/mips/brcm-boards/generic/irq.c | 130 ++ .../drivers/mtd/chips/cfi_cmdset_0701.c | 855 ++++++++ .../kernel-source/drivers/mtd/devices/sflash.c | 283 +++ .../drivers/mtd/maps/bcm947xx-flash.c | 236 +++ .../linux/kernel-source/drivers/net/diag/Makefile | 9 + .../kernel-source/drivers/net/diag/diag_led.c | 210 ++ .../linux/kernel-source/drivers/net/et/Makefile | 34 + .../linux/kernel-source/drivers/net/hnd/Config.in | 35 + .../linux/kernel-source/drivers/net/hnd/Makefile | 30 + .../linux/kernel-source/drivers/net/hnd/bcmsrom.c | 711 +++++++ .../linux/kernel-source/drivers/net/hnd/bcmutils.c | 803 ++++++++ .../linux/kernel-source/drivers/net/hnd/hnddma.c | 841 ++++++++ .../kernel-source/drivers/net/hnd/linux_osl.c | 465 +++++ .../linux/kernel-source/drivers/net/hnd/sbutils.c | 2164 ++++++++++++++++++++ .../kernel-source/drivers/net/hnd/shared_ksyms.sh | 21 + .../linux/kernel-source/drivers/net/wl/Makefile | 59 + .../kernel-source/drivers/pcmcia/bcm4710_generic.c | 912 +++++++++ .../kernel-source/drivers/pcmcia/bcm4710_pcmcia.c | 266 +++ .../kernel-source/drivers/pcmcia/bcm4710pcmcia.h | 118 ++ package/linux/kernel-source/include/bcm4710.h | 91 + package/linux/kernel-source/include/bcmdevs.h | 251 +++ package/linux/kernel-source/include/bcmendian.h | 127 ++ package/linux/kernel-source/include/bcmenet47xx.h | 229 +++ package/linux/kernel-source/include/bcmenetmib.h | 81 + package/linux/kernel-source/include/bcmenetrxh.h | 43 + package/linux/kernel-source/include/bcmnvram.h | 148 ++ package/linux/kernel-source/include/bcmsrom.h | 24 + package/linux/kernel-source/include/bcmutils.h | 157 ++ package/linux/kernel-source/include/hnddma.h | 186 ++ package/linux/kernel-source/include/hndmips.h | 16 + package/linux/kernel-source/include/linux_osl.h | 343 ++++ package/linux/kernel-source/include/linuxver.h | 392 ++++ package/linux/kernel-source/include/osl.h | 38 + package/linux/kernel-source/include/pcicfg.h | 369 ++++ package/linux/kernel-source/include/proto/802.11.h | 852 ++++++++ .../linux/kernel-source/include/proto/ethernet.h | 164 ++ package/linux/kernel-source/include/sbchipc.h | 367 ++++ package/linux/kernel-source/include/sbconfig.h | 292 +++ package/linux/kernel-source/include/sbextif.h | 242 +++ package/linux/kernel-source/include/sbmemc.h | 147 ++ package/linux/kernel-source/include/sbmips.h | 56 + package/linux/kernel-source/include/sbpci.h | 113 + package/linux/kernel-source/include/sbpcmcia.h | 139 ++ package/linux/kernel-source/include/sbsdram.h | 75 + package/linux/kernel-source/include/sbutils.h | 94 + package/linux/kernel-source/include/sflash.h | 36 + package/linux/kernel-source/include/trxhdr.h | 31 + package/linux/kernel-source/include/typedefs.h | 293 +++ package/linux/linux.mk | 35 +- 85 files changed, 18591 insertions(+), 16 deletions(-) delete mode 100644 package/linux/kernel-patches/023-drivers_net_et-hnd.bz2 delete mode 100644 package/linux/kernel-patches/025-drivers_net_hnd-hnd.bz2 delete mode 100644 package/linux/kernel-patches/026-drivers_net_wl-hnd.bz2 create mode 100644 package/linux/kernel-patches/028-drivers_pcmcia_Makefile.bz2 delete mode 100644 package/linux/kernel-patches/028-drivers_pcmcia_jumbo.bz2 delete mode 100644 package/linux/kernel-patches/101-arch_mips_brcm-boards_bcm947xx_compressed.bz2 delete mode 100644 package/linux/kernel-patches/104-drivers_net_diag-mbm.bz2 delete mode 100644 package/linux/kernel-patches/105-makefile-mkdep-fix.bz2 delete mode 100644 package/linux/kernel-patches/400-bcm947xx-openwrt.bz2 create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/Makefile create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/Makefile create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/README.mjn3 create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/data.lds create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds.in create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/head.S create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds.in create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/gpio.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram_linux.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/pcibios.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/perfcntr.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/prom.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbmips.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbpci.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/setup.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sflash.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/generic/Makefile create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/generic/int-handler.S create mode 100644 package/linux/kernel-source/arch/mips/brcm-boards/generic/irq.c create mode 100644 package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c create mode 100644 package/linux/kernel-source/drivers/mtd/devices/sflash.c create mode 100644 package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c create mode 100644 package/linux/kernel-source/drivers/net/diag/Makefile create mode 100644 package/linux/kernel-source/drivers/net/diag/diag_led.c create mode 100644 package/linux/kernel-source/drivers/net/et/Makefile create mode 100644 package/linux/kernel-source/drivers/net/hnd/Config.in create mode 100644 package/linux/kernel-source/drivers/net/hnd/Makefile create mode 100644 package/linux/kernel-source/drivers/net/hnd/bcmsrom.c create mode 100644 package/linux/kernel-source/drivers/net/hnd/bcmutils.c create mode 100644 package/linux/kernel-source/drivers/net/hnd/hnddma.c create mode 100644 package/linux/kernel-source/drivers/net/hnd/linux_osl.c create mode 100644 package/linux/kernel-source/drivers/net/hnd/sbutils.c create mode 100644 package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh create mode 100644 package/linux/kernel-source/drivers/net/wl/Makefile create mode 100644 package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c create mode 100644 package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c create mode 100644 package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h create mode 100644 package/linux/kernel-source/include/bcm4710.h create mode 100644 package/linux/kernel-source/include/bcmdevs.h create mode 100644 package/linux/kernel-source/include/bcmendian.h create mode 100644 package/linux/kernel-source/include/bcmenet47xx.h create mode 100644 package/linux/kernel-source/include/bcmenetmib.h create mode 100644 package/linux/kernel-source/include/bcmenetrxh.h create mode 100644 package/linux/kernel-source/include/bcmnvram.h create mode 100755 package/linux/kernel-source/include/bcmsrom.h create mode 100644 package/linux/kernel-source/include/bcmutils.h create mode 100644 package/linux/kernel-source/include/hnddma.h create mode 100644 package/linux/kernel-source/include/hndmips.h create mode 100644 package/linux/kernel-source/include/linux_osl.h create mode 100644 package/linux/kernel-source/include/linuxver.h create mode 100644 package/linux/kernel-source/include/osl.h create mode 100644 package/linux/kernel-source/include/pcicfg.h create mode 100644 package/linux/kernel-source/include/proto/802.11.h create mode 100644 package/linux/kernel-source/include/proto/ethernet.h create mode 100644 package/linux/kernel-source/include/sbchipc.h create mode 100644 package/linux/kernel-source/include/sbconfig.h create mode 100644 package/linux/kernel-source/include/sbextif.h create mode 100644 package/linux/kernel-source/include/sbmemc.h create mode 100644 package/linux/kernel-source/include/sbmips.h create mode 100644 package/linux/kernel-source/include/sbpci.h create mode 100644 package/linux/kernel-source/include/sbpcmcia.h create mode 100644 package/linux/kernel-source/include/sbsdram.h create mode 100644 package/linux/kernel-source/include/sbutils.h create mode 100644 package/linux/kernel-source/include/sflash.h create mode 100644 package/linux/kernel-source/include/trxhdr.h create mode 100644 package/linux/kernel-source/include/typedefs.h diff --git a/package/linux/kernel-patches/001-Makefile.bz2 b/package/linux/kernel-patches/001-Makefile.bz2 index 5f25c387fd..5c1e74048c 100644 Binary files a/package/linux/kernel-patches/001-Makefile.bz2 and b/package/linux/kernel-patches/001-Makefile.bz2 differ diff --git a/package/linux/kernel-patches/020-drivers_mtd-jumbo.bz2 b/package/linux/kernel-patches/020-drivers_mtd-jumbo.bz2 index e7774ba814..9914ac59af 100644 Binary files a/package/linux/kernel-patches/020-drivers_mtd-jumbo.bz2 and b/package/linux/kernel-patches/020-drivers_mtd-jumbo.bz2 differ diff --git a/package/linux/kernel-patches/022-drivers_net_Makefile.bz2 b/package/linux/kernel-patches/022-drivers_net_Makefile.bz2 index c7a6c54b7f..2d319b8e82 100644 Binary files a/package/linux/kernel-patches/022-drivers_net_Makefile.bz2 and b/package/linux/kernel-patches/022-drivers_net_Makefile.bz2 differ diff --git a/package/linux/kernel-patches/023-drivers_net_et-hnd.bz2 b/package/linux/kernel-patches/023-drivers_net_et-hnd.bz2 deleted file mode 100644 index c5f87bd861..0000000000 Binary files a/package/linux/kernel-patches/023-drivers_net_et-hnd.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/025-drivers_net_hnd-hnd.bz2 b/package/linux/kernel-patches/025-drivers_net_hnd-hnd.bz2 deleted file mode 100644 index 8aa96b9347..0000000000 Binary files a/package/linux/kernel-patches/025-drivers_net_hnd-hnd.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/026-drivers_net_wl-hnd.bz2 b/package/linux/kernel-patches/026-drivers_net_wl-hnd.bz2 deleted file mode 100644 index 65d0494469..0000000000 Binary files a/package/linux/kernel-patches/026-drivers_net_wl-hnd.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/028-drivers_pcmcia_Makefile.bz2 b/package/linux/kernel-patches/028-drivers_pcmcia_Makefile.bz2 new file mode 100644 index 0000000000..d4314faf6e Binary files /dev/null and b/package/linux/kernel-patches/028-drivers_pcmcia_Makefile.bz2 differ diff --git a/package/linux/kernel-patches/028-drivers_pcmcia_jumbo.bz2 b/package/linux/kernel-patches/028-drivers_pcmcia_jumbo.bz2 deleted file mode 100644 index f8221020bd..0000000000 Binary files a/package/linux/kernel-patches/028-drivers_pcmcia_jumbo.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/101-arch_mips_brcm-boards_bcm947xx_compressed.bz2 b/package/linux/kernel-patches/101-arch_mips_brcm-boards_bcm947xx_compressed.bz2 deleted file mode 100644 index e61c93ed5b..0000000000 Binary files a/package/linux/kernel-patches/101-arch_mips_brcm-boards_bcm947xx_compressed.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/104-drivers_net_diag-mbm.bz2 b/package/linux/kernel-patches/104-drivers_net_diag-mbm.bz2 deleted file mode 100644 index 1167fc13ec..0000000000 Binary files a/package/linux/kernel-patches/104-drivers_net_diag-mbm.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/105-makefile-mkdep-fix.bz2 b/package/linux/kernel-patches/105-makefile-mkdep-fix.bz2 deleted file mode 100644 index aab973feb6..0000000000 Binary files a/package/linux/kernel-patches/105-makefile-mkdep-fix.bz2 and /dev/null differ diff --git a/package/linux/kernel-patches/400-bcm947xx-openwrt.bz2 b/package/linux/kernel-patches/400-bcm947xx-openwrt.bz2 deleted file mode 100644 index 504e2faa4e..0000000000 Binary files a/package/linux/kernel-patches/400-bcm947xx-openwrt.bz2 and /dev/null differ diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/Makefile b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/Makefile new file mode 100644 index 0000000000..eae8eba49c --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/Makefile @@ -0,0 +1,23 @@ +# +# Makefile for Broadcom BCM947XX boards +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := bcm947xx.o + +export-objs := nvram_linux.o setup.o +obj-y := prom.o setup.o time.o sbmips.o sbpci.o pcibios.o perfcntr.o gpio.o +obj-y += sflash.o nvram.o nvram_linux.o + +vpath %.c $(SRCBASE)/shared $(SRCBASE)/shared/nvram + +include $(TOPDIR)/Rules.make diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/Makefile b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/Makefile new file mode 100644 index 0000000000..4004653268 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/Makefile @@ -0,0 +1,100 @@ +# +# Makefile for Broadcom BCM947XX boards +# +# Copyright 2001-2003, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# +# Copyright 2004 Manuel Novoa III +# Modified to support bzip'd kernels. +# Of course, it would be better to integrate bunzip capability into CFE. +# + +# Link at 3 MB offset in RAM +#TEXT_START ?= 0x80300000 +TEXT_START ?= 0x80001000 +BZ_MEM_TOP := 0x81000000 +BZ_TEXT_START := BZ_MEM_TOP-0x4000 +BZ_STACK_TOP := BZ_TEXT_START-4 + +OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S + +SRCBASE := $(TOPDIR)/../.. +VPATH := $(SRCBASE)/shared +ASFLAGS += -D__ASSEMBLY__ -I$(SRCBASE)/include -DLOADADDR=$(LOADADDR) +ASFLAGS += -DBZ_MEM_TOP=$(BZ_MEM_TOP) +ASFLAGS += -DBZ_TEXT_START=$(BZ_TEXT_START) +ASFLAGS += -DBZ_STACK_TOP=$(BZ_STACK_TOP) +CFLAGS += -I$(SRCBASE)/include -DLOADADDR=$(LOADADDR) +CFLAGS += -DBZ_MEM_TOP=$(BZ_MEM_TOP) +CFLAGS += -DBZ_TEXT_START=$(BZ_TEXT_START) +CFLAGS += -DBZ_STACK_TOP=$(BZ_STACK_TOP) +ifdef CONFIG_MCOUNT +CFLAGS := $(subst -pg,,$(CFLAGS)) +endif +CFLAGS += -ffunction-sections $(call check_gcc, -fvtable-gc, ) +SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/BZ_MEM_TOP/$(BZ_MEM_TOP)/;s/TEXT_START/$(TEXT_START)/ + +SYSTEM ?= $(TOPDIR)/vmlinux +OBJECTS := head.o data.o + +all: bzImage vmlinuz + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +# Create a gzipped version named vmlinuz for compatibility +vmlinuz: piggy + gzip -c9 $< > $@ + +# Our bzImage is a gzip'd binary that decompresses and runs +# the appended bzip'd kernel. +bzImage: bzLoaderImage.gz piggz + cat bzLoaderImage.gz piggz > $@ + +bzLoaderImage.gz: bzLoaderImage + gzip -nc9 $< > $@ + +bzLoaderImage: bzLoader + $(OBJCOPY) $< $@ + +bzLoader: vmlinux.lds $(OBJECTS) + $(LD) -static --gc-sections -no-warn-mismatch -T vmlinux.lds -o $@ $(OBJECTS) + +vmlinux.lds: vmlinux.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +piggz: piggy + bzip2 -c9 $< > $@ + +piggy: $(SYSTEM) + $(OBJCOPY) $< $@ + +data.o: data.lds data.image + $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary data.image -b elf32-tradlittlemips + +data.lds: + @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ + +data.image: decompress_bunzip2.image + $(OBJCOPY) $< $@ + +decompress_bunzip2.image: decompress_bunzip2.lds decompress_bunzip2.o + $(LD) -static --gc-sections -no-warn-mismatch -T decompress_bunzip2.lds -o $@ decompress_bunzip2.o + +decompress_bunzip2.lds: decompress_bunzip2.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +mrproper: clean + +clean: + rm -f vmlinux vmlinuz piggz piggy *.lds *.o \ + bzLoader bzLoaderImage bzLoaderImage.gz bzImage \ + data.lds data.image \ + decompress_bunzip2.lds decompress_bunzip2.image diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/README.mjn3 b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/README.mjn3 new file mode 100644 index 0000000000..0e93e55f90 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/README.mjn3 @@ -0,0 +1,20 @@ + +FIRST... See the dedication in the decompress_bunzip2.c file as it applies +here too. Donations to hospice in Toni's memory would be appreciated. + +As far as the code goes... the bzImage is just a bzip'd kernel image with +a small gzip'd decompressor/loader stuck on front. CFE ungzip's the loader +app which then relocates the bunzip decompressor into higher memory and +bunzip's the compressed kernel directly from flash. Then the instruction +cache is flushed (to remove traces of the loader) and the kernel is executed. + +Of course, a better approach would be to add bunzip decompression to CFE. + +Notes... + 1) Instruction cache size and linesize are hardcoded (see the #warning). + 2) Currently assumes at least 16M or ram. + 3) Thanks to Mike Baker mbm at alt dot org for bouncing ideas back + and forth as well as diagnosing the last (icache) bug. + +Manuel Novoa III May 30, 2004 + diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/data.lds b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/data.lds new file mode 100644 index 0000000000..ec48b2dfdf --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/data.lds @@ -0,0 +1 @@ +SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.c new file mode 100644 index 0000000000..9a120796ff --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.c @@ -0,0 +1,758 @@ +/* vi: set sw=4 ts=4: */ +/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net). + + Based on bzip2 decompression code by Julian R Seward (jseward@acm.org), + which also acknowledges contributions by Mike Burrows, David Wheeler, + Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten, + Robert Sedgewick, and Jon L. Bentley. + + This code is licensed under the LGPLv2: + LGPL (http://www.gnu.org/copyleft/lgpl.html +*/ + +/* + Size and speed optimizations by Manuel Novoa III (mjn3@codepoet.org). + + More efficient reading of huffman codes, a streamlined read_bunzip() + function, and various other tweaks. In (limited) tests, approximately + 20% faster than bzcat on x86 and about 10% faster on arm. + + Note that about 2/3 of the time is spent in read_unzip() reversing + the Burrows-Wheeler transformation. Much of that time is delay + resulting from cache misses. + + I would ask that anyone benefiting from this work, especially those + using it in commercial products, consider making a donation to my local + non-profit hospice organization in the name of the woman I loved, who + passed away Feb. 12, 2003. + + In memory of Toni W. Hagan + + Hospice of Acadiana, Inc. + 2600 Johnston St., Suite 200 + Lafayette, LA 70503-3240 + + Phone (337) 232-1234 or 1-800-738-2226 + Fax (337) 232-1297 + + http://www.hospiceacadiana.com/ + + Manuel + */ + +/* May 21, 2004 Manuel Novoa III + * Modified to load a bzip'd kernel on the linksys wrt54g. + * + * May 30, 2004 + * Further size reduction via inlining and disabling len check code. + */ + +/**********************************************************************/ + +/* Note... the LED code is specific to the v2.0 (and GS?) unit. */ +#undef ENABLE_LEDS +/* #define ENABLE_LEDS 1 */ + +/* Do we want to bother with checking the bzip'd data for errors? */ +#undef ENABLE_BUNZIP_CHECKING +/* #define ENABLE_BUNZIP_CHECKING 1 */ + +/**********************************************************************/ +/* #include */ +#define BCM4710_FLASH 0x1fc00000 /* Flash */ + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +/* The following cache code was taken from the file bcm4710_cache.h + * which was necessarily GPL as it was used to build the linksys + * kernel for the wrt54g. */ + +#warning icache [l]size hardcoded + +#define icache_size 8192 +#define ic_lsize 16 + +#define Index_Invalidate_I 0x00 + +#define cache_unroll(base,op) \ + __asm__ __volatile__( \ + ".set noreorder;\n" \ + ".set mips3;\n" \ + "cache %1, (%0);\n" \ + ".set mips0;\n" \ + ".set reorder\n" \ + : \ + : "r" (base), \ + "i" (op)); + +static __inline__ void blast_icache(void) +{ + unsigned long start = KSEG0; + unsigned long end = (start + icache_size); + + while(start < end) { + cache_unroll(start,Index_Invalidate_I); + start += ic_lsize; + } +} + +/**********************************************************************/ +#ifndef INT_MAX +#define INT_MAX (((1 << 30)-1)*2 + 1) +#endif +/**********************************************************************/ +#ifdef ENABLE_BUNZIP_CHECKING + +#define REBOOT do {} while (1) + +#else + +#define REBOOT ((void) 0) + +#endif +/**********************************************************************/ +#ifdef ENABLE_LEDS + +#define LED_POWER_ON 0x02 /* OFF == flashing */ +#define LED_DMZ_OFF 0x80 +#define LED_WLAN_OFF 0x01 + +#define LED_CODE_0 (LED_POWER_ON | LED_DMZ_OFF | LED_WLAN_OFF) +#define LED_CODE_1 (LED_POWER_ON | LED_DMZ_OFF) +#define LED_CODE_2 (LED_POWER_ON | LED_WLAN_OFF) +#define LED_CODE_3 (LED_POWER_ON) + +#define SET_LED_ERROR(X) \ + do { \ + *(volatile u8*)(KSEG1ADDR(0x18000064))=(X & ~LED_POWER_ON); \ + *(volatile u8*)(KSEG1ADDR(0x18000068))=0; /* Disable changes */ \ + REBOOT; \ + } while (0) + +#define SET_LED(X) *(volatile u8*)(KSEG1ADDR(0x18000064))=X; + + +typedef unsigned char u8; + +#else + +#define SET_LED_ERROR(X) REBOOT +#define SET_LED(X) ((void)0) + +#endif + +/**********************************************************************/ + +/* Constants for huffman coding */ +#define MAX_GROUPS 6 +#define GROUP_SIZE 50 /* 64 would have been more efficient */ +#define MAX_HUFCODE_BITS 20 /* Longest huffman code allowed */ +#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */ +#define SYMBOL_RUNA 0 +#define SYMBOL_RUNB 1 + +/* Status return values */ +#define RETVAL_OK 0 +#define RETVAL_LAST_BLOCK (-1) +#define RETVAL_NOT_BZIP_DATA (-2) +#define RETVAL_UNEXPECTED_INPUT_EOF (-3) +#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4) +#define RETVAL_DATA_ERROR (-5) +#define RETVAL_OUT_OF_MEMORY (-6) +#define RETVAL_OBSOLETE_INPUT (-7) + +/* Other housekeeping constants */ +#define IOBUF_SIZE 4096 + +/* This is what we know about each huffman coding group */ +struct group_data { + /* We have an extra slot at the end of limit[] for a sentinal value. */ + int limit[MAX_HUFCODE_BITS+1],base[MAX_HUFCODE_BITS],permute[MAX_SYMBOLS]; + int minLen, maxLen; +}; + +/* Structure holding all the housekeeping data, including IO buffers and + memory that persists between calls to bunzip */ +typedef struct { + /* State for interrupting output loop */ + int writeCopies,writePos,writeRunCountdown,writeCount,writeCurrent; + /* I/O tracking data (file handles, buffers, positions, etc.) */ +#if defined(ENABLE_BUNZIP_CHECKING) + int /*in_fd,out_fd,*/ inbufCount,inbufPos /*,outbufPos*/; +#else + int /*in_fd,out_fd,inbufCount,*/ inbufPos /*,outbufPos*/; +#endif + unsigned char *inbuf /*,*outbuf*/; + unsigned int inbufBitCount, inbufBits; + /* The CRC values stored in the block header and calculated from the data */ +#ifdef ENABLE_BUNZIP_CHECKING + unsigned int crc32Table[256],headerCRC, totalCRC, writeCRC; + /* Intermediate buffer and its size (in bytes) */ + unsigned int *dbuf, dbufSize; +#else + unsigned int *dbuf; +#endif + /* These things are a bit too big to go on the stack */ + unsigned char selectors[32768]; /* nSelectors=15 bits */ + struct group_data groups[MAX_GROUPS]; /* huffman coding tables */ +} bunzip_data; + +static int get_next_block(bunzip_data *bd); + +/**********************************************************************/ +/* Undo burrows-wheeler transform on intermediate buffer to produce output. + If start_bunzip was initialized with out_fd=-1, then up to len bytes of + data are written to outbuf. Return value is number of bytes written or + error (all errors are negative numbers). If out_fd!=-1, outbuf and len + are ignored, data is written to out_fd and return is RETVAL_OK or error. +*/ + +static __inline__ int read_bunzip(bunzip_data *bd, char *outbuf, int len) +{ + const unsigned int *dbuf; + int pos,current,previous,gotcount; +#ifdef ENABLE_LEDS + int led_state = LED_CODE_2; +#endif + + /* If last read was short due to end of file, return last block now */ + if(bd->writeCount<0) return bd->writeCount; + + gotcount = 0; + dbuf=bd->dbuf; + pos=bd->writePos; + current=bd->writeCurrent; + + /* We will always have pending decoded data to write into the output + buffer unless this is the very first call (in which case we haven't + huffman-decoded a block into the intermediate buffer yet). */ + + if (bd->writeCopies) { + /* Inside the loop, writeCopies means extra copies (beyond 1) */ + --bd->writeCopies; + /* Loop outputting bytes */ + for(;;) { +#if 0 /* Might want to enable this if passing a limiting size. */ +/* #ifdef ENABLE_BUNZIP_CHECKING */ + /* If the output buffer is full, snapshot state and return */ + if(gotcount >= len) { + bd->writePos=pos; + bd->writeCurrent=current; + bd->writeCopies++; + return len; + } +#endif + /* Write next byte into output buffer, updating CRC */ + outbuf[gotcount++] = current; +#ifdef ENABLE_BUNZIP_CHECKING + bd->writeCRC=(((bd->writeCRC)<<8) + ^bd->crc32Table[((bd->writeCRC)>>24)^current]); +#endif + /* Loop now if we're outputting multiple copies of this byte */ + if (bd->writeCopies) { + --bd->writeCopies; + continue; + } +decode_next_byte: + if (!bd->writeCount--) break; + /* Follow sequence vector to undo Burrows-Wheeler transform */ + previous=current; + pos=dbuf[pos]; + current=pos&0xff; + pos>>=8; + /* After 3 consecutive copies of the same byte, the 4th is a repeat + count. We count down from 4 instead + * of counting up because testing for non-zero is faster */ + if(--bd->writeRunCountdown) { + if(current!=previous) bd->writeRunCountdown=4; + } else { + /* We have a repeated run, this byte indicates the count */ + bd->writeCopies=current; + current=previous; + bd->writeRunCountdown=5; + /* Sometimes there are just 3 bytes (run length 0) */ + if(!bd->writeCopies) goto decode_next_byte; + /* Subtract the 1 copy we'd output anyway to get extras */ + --bd->writeCopies; + } + } +#ifdef ENABLE_BUNZIP_CHECKING + /* Decompression of this block completed successfully */ + bd->writeCRC=~bd->writeCRC; + bd->totalCRC=((bd->totalCRC<<1) | (bd->totalCRC>>31)) ^ bd->writeCRC; + /* If this block had a CRC error, force file level CRC error. */ + if(bd->writeCRC!=bd->headerCRC) { + bd->totalCRC=bd->headerCRC+1; + return RETVAL_LAST_BLOCK; + } +#endif + } + +#ifdef ENABLE_LEDS + if (led_state == LED_CODE_2) { + led_state = LED_CODE_1; + } else { + led_state = LED_CODE_2; + } + SET_LED(led_state); +#endif + + /* Refill the intermediate buffer by huffman-decoding next block of input */ + /* (previous is just a convenient unused temp variable here) */ + previous=get_next_block(bd); +#ifdef ENABLE_BUNZIP_CHECKING + if(previous) { + bd->writeCount=previous; + return (previous!=RETVAL_LAST_BLOCK) ? previous : gotcount; + } + bd->writeCRC=0xffffffffUL; +#else + if (previous) return gotcount; +#endif + pos=bd->writePos; + current=bd->writeCurrent; + goto decode_next_byte; +} + +/**********************************************************************/ +/* WARNING!!! Must be the first function!!! */ + +void load_and_run(unsigned long ra) +{ + int dbuf[900000]; /* Maximum requred */ + bunzip_data bd; + + unsigned int i; +#ifdef ENABLE_BUNZIP_CHECKING + unsigned int j, c; + int r; +#endif + char *p; + +#ifdef ENABLE_LEDS + *(volatile u8*)(KSEG1ADDR(0x18000068))=0x83; /* Allow all bits to change */ + SET_LED(LED_CODE_0); +#endif + +/* memset(&bd,0,sizeof(bunzip_data)); */ + p = (char *) &bd; + for (i = 0 ; i < sizeof(bunzip_data) ; i++) { + p[i] = 0; + } + + /* Find start of flash and adjust for pmon partition. */ + p = ((char *) KSEG1ADDR(BCM4710_FLASH)) + 0x10000; + + SET_LED(LED_CODE_1); + /* Find the start of the bzip'd data. */ + while ((p[0]!='B') || (p[1]!='Z') || (p[2]!='h') /*|| (p[3]!='9')*/) ++p; + SET_LED(LED_CODE_2); + + /* Setup input buffer */ + bd.inbuf=p+4; /* Skip the "BZh9" header. */ +#ifdef ENABLE_BUNZIP_CHECKING + bd.inbufCount=INT_MAX; + /* Init the CRC32 table (big endian) */ + for(i=0;i<256;i++) { + c=i<<24; + for(j=8;j;j--) + c=c&0x80000000 ? (c<<1)^0x04c11db7 : (c<<1); + bd.crc32Table[i]=c; + } + + bd.dbufSize=900000; +#endif + bd.dbuf=dbuf; + + /* Actually do the bunzip */ +#ifdef ENABLE_BUNZIP_CHECKING + r = read_bunzip(&bd, ((char *) LOADADDR), INT_MAX); + if (r > 0) { + if (bd.headerCRC==bd.totalCRC) { + SET_LED(LED_CODE_3); + { + int code = LED_WLAN_OFF; + int i, j; + for (j=0 ; j < 4 ; j++) { + for (i=0; i<(1<<27) ; i++) {} + SET_LED(code); + code ^= LED_WLAN_OFF; + } + } + blast_icache(); + /* Jump to load address */ + ((void (*)(void)) LOADADDR)(); + } else { + SET_LED_ERROR(LED_CODE_3); + } + } else { + SET_LED_ERROR(LED_CODE_2); + } +#else + read_bunzip(&bd, ((char *) LOADADDR), INT_MAX); + blast_icache(); + /* Jump to load address */ + ((void (*)(void)) LOADADDR)(); +#endif +} + +/**********************************************************************/ +/* Return the next nnn bits of input. All reads from the compressed input + are done through this function. All reads are big endian */ +static unsigned int get_bits(bunzip_data *bd, char bits_wanted) +{ + unsigned int bits=0; + + /* If we need to get more data from the byte buffer, do so. (Loop getting + one byte at a time to enforce endianness and avoid unaligned access.) */ + while (bd->inbufBitCountinbufPos==bd->inbufCount) { + SET_LED_ERROR(LED_CODE_0); + } +#endif + /* Avoid 32-bit overflow (dump bit buffer to top of output) */ + if(bd->inbufBitCount>=24) { + bits=bd->inbufBits&((1<inbufBitCount)-1); + bits_wanted-=bd->inbufBitCount; + bits<<=bits_wanted; + bd->inbufBitCount=0; + } + /* Grab next 8 bits of input from buffer. */ + bd->inbufBits=(bd->inbufBits<<8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount+=8; + } + /* Calculate result */ + bd->inbufBitCount-=bits_wanted; + bits|=(bd->inbufBits>>bd->inbufBitCount)&((1<dbuf; +#ifdef ENABLE_BUNZIP_CHECKING + dbufSize=bd->dbufSize; +#endif + selectors=bd->selectors; + /* Read in header signature and CRC, then validate signature. + (last block signature means CRC is for whole file, return now) */ + i = get_bits(bd,24); + j = get_bits(bd,24); +#ifdef ENABLE_BUNZIP_CHECKING + bd->headerCRC=get_bits(bd,32); + if ((i == 0x177245) && (j == 0x385090)) return RETVAL_LAST_BLOCK; + if ((i != 0x314159) || (j != 0x265359)) return RETVAL_NOT_BZIP_DATA; + /* We can add support for blockRandomised if anybody complains. There was + some code for this in busybox 1.0.0-pre3, but nobody ever noticed that + it didn't actually work. */ + if(get_bits(bd,1)) return RETVAL_OBSOLETE_INPUT; + if((origPtr=get_bits(bd,24)) > dbufSize) return RETVAL_DATA_ERROR; +#else + get_bits(bd,32); + if ((i == 0x177245) && (j == 0x385090)) return RETVAL_LAST_BLOCK; + get_bits(bd,1); + origPtr=get_bits(bd,24); +#endif + /* mapping table: if some byte values are never used (encoding things + like ascii text), the compression code removes the gaps to have fewer + symbols to deal with, and writes a sparse bitfield indicating which + values were present. We make a translation table to convert the symbols + back to the corresponding bytes. */ + t=get_bits(bd, 16); + symTotal=0; + for (i=0;i<16;i++) { + if(t&(1<<(15-i))) { + k=get_bits(bd,16); + for(j=0;j<16;j++) + if(k&(1<<(15-j))) symToByte[symTotal++]=(16*i)+j; + } + } + /* How many different huffman coding groups does this block use? */ + groupCount=get_bits(bd,3); +#ifdef ENABLE_BUNZIP_CHECKING + if (groupCount<2 || groupCount>MAX_GROUPS) return RETVAL_DATA_ERROR; +#endif + /* nSelectors: Every GROUP_SIZE many symbols we select a new huffman coding + group. Read in the group selector list, which is stored as MTF encoded + bit runs. (MTF=Move To Front, as each value is used it's moved to the + start of the list.) */ +#ifdef ENABLE_BUNZIP_CHECKING + if(!(nSelectors=get_bits(bd, 15))) return RETVAL_DATA_ERROR; +#else + nSelectors=get_bits(bd, 15); +#endif + for(i=0; i=groupCount) return RETVAL_DATA_ERROR; +#else + for(j=0;get_bits(bd,1);j++) ; +#endif + /* Decode MTF to get the next selector */ + uc = mtfSymbol[j]; + for(;j;j--) mtfSymbol[j] = mtfSymbol[j-1]; + mtfSymbol[0]=selectors[i]=uc; + } + /* Read the huffman coding tables for each group, which code for symTotal + literal symbols, plus two run symbols (RUNA, RUNB) */ + symCount=symTotal+2; + for (j=0; j (MAX_HUFCODE_BITS-1)) + return RETVAL_DATA_ERROR; +#endif + /* If first bit is 0, stop. Else second bit indicates whether + to increment or decrement the value. Optimization: grab 2 + bits and unget the second if the first was 0. */ + k = get_bits(bd,2); + if (k < 2) { + bd->inbufBitCount++; + break; + } + /* Add one if second bit 1, else subtract 1. Avoids if/else */ + t+=(((k+1)&2)-1); + } + /* Correct for the initial -1, to get the final symbol length */ + length[i]=t+1; + } + /* Find largest and smallest lengths in this group */ + minLen=maxLen=length[0]; + for(i = 1; i < symCount; i++) { + if(length[i] > maxLen) maxLen = length[i]; + else if(length[i] < minLen) minLen = length[i]; + } + /* Calculate permute[], base[], and limit[] tables from length[]. + * + * permute[] is the lookup table for converting huffman coded symbols + * into decoded symbols. base[] is the amount to subtract from the + * value of a huffman symbol of a given length when using permute[]. + * + * limit[] indicates the largest numerical value a symbol with a given + * number of bits can have. This is how the huffman codes can vary in + * length: each code with a value>limit[length] needs another bit. + */ + hufGroup=bd->groups+j; + hufGroup->minLen = minLen; + hufGroup->maxLen = maxLen; + /* Note that minLen can't be smaller than 1, so we adjust the base + and limit array pointers so we're not always wasting the first + entry. We do this again when using them (during symbol decoding).*/ + base=hufGroup->base-1; + limit=hufGroup->limit-1; + /* Calculate permute[]. Concurently, initialize temp[] and limit[]. */ + pp=0; + for(i=minLen;i<=maxLen;i++) { + temp[i]=limit[i]=0; + for(t=0;tpermute[pp++] = t; + } + /* Count symbols coded for at each bit length */ + for (i=0;ilimit[length] comparison. */ + limit[i]= (pp << (maxLen - i)) - 1; + pp<<=1; + base[i+1]=pp-(t+=temp[i]); + } + limit[maxLen+1] = INT_MAX; /* Sentinal value for reading next sym. */ + limit[maxLen]=pp+temp[maxLen]-1; + base[minLen]=0; + } + /* We've finished reading and digesting the block header. Now read this + block's huffman coded symbols from the file and undo the huffman coding + and run length encoding, saving the result into dbuf[dbufCount++]=uc */ + + /* Initialize symbol occurrence counters and symbol Move To Front table */ + for(i=0;i<256;i++) { + byteCount[i] = 0; + mtfSymbol[i]=(unsigned char)i; + } + /* Loop through compressed symbols. */ + runPos=dbufCount=symCount=selector=0; + for(;;) { + /* Determine which huffman coding group to use. */ + if(!(symCount--)) { + symCount=GROUP_SIZE-1; +#ifdef ENABLE_BUNZIP_CHECKING + if(selector>=nSelectors) return RETVAL_DATA_ERROR; +#endif + hufGroup=bd->groups+selectors[selector++]; + base=hufGroup->base-1; + limit=hufGroup->limit-1; + } + /* Read next huffman-coded symbol. */ + /* Note: It is far cheaper to read maxLen bits and back up than it is + to read minLen bits and then an additional bit at a time, testing + as we go. Because there is a trailing last block (with file CRC), + there is no danger of the overread causing an unexpected EOF for a + valid compressed file. As a further optimization, we do the read + inline (falling back to a call to get_bits if the buffer runs + dry). The following (up to got_huff_bits:) is equivalent to + j=get_bits(bd,hufGroup->maxLen); + */ + while (bd->inbufBitCountmaxLen) { +#ifdef ENABLE_BUNZIP_CHECKING + if(bd->inbufPos==bd->inbufCount) { + j = get_bits(bd,hufGroup->maxLen); + goto got_huff_bits; + } +#endif + bd->inbufBits=(bd->inbufBits<<8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount+=8; + }; + bd->inbufBitCount-=hufGroup->maxLen; + j = (bd->inbufBits>>bd->inbufBitCount)&((1<maxLen)-1); +got_huff_bits: + /* Figure how how many bits are in next symbol and unget extras */ + i=hufGroup->minLen; + while(j>limit[i]) ++i; + bd->inbufBitCount += (hufGroup->maxLen - i); + /* Huffman decode value to get nextSym (with bounds checking) */ +#ifdef ENABLE_BUNZIP_CHECKING + if ((i > hufGroup->maxLen) + || (((unsigned)(j=(j>>(hufGroup->maxLen-i))-base[i])) + >= MAX_SYMBOLS)) + return RETVAL_DATA_ERROR; +#else + j=(j>>(hufGroup->maxLen-i))-base[i]; +#endif + nextSym = hufGroup->permute[j]; + /* We have now decoded the symbol, which indicates either a new literal + byte, or a repeated run of the most recent literal byte. First, + check if nextSym indicates a repeated run, and if so loop collecting + how many times to repeat the last literal. */ + if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */ + /* If this is the start of a new run, zero out counter */ + if(!runPos) { + runPos = 1; + t = 0; + } + /* Neat trick that saves 1 symbol: instead of or-ing 0 or 1 at + each bit position, add 1 or 2 instead. For example, + 1011 is 1<<0 + 1<<1 + 2<<2. 1010 is 2<<0 + 2<<1 + 1<<2. + You can make any bit pattern that way using 1 less symbol than + the basic or 0/1 method (except all bits 0, which would use no + symbols, but a run of length 0 doesn't mean anything in this + context). Thus space is saved. */ + t += (runPos << nextSym); /* +runPos if RUNA; +2*runPos if RUNB */ + runPos <<= 1; + continue; + } + /* When we hit the first non-run symbol after a run, we now know + how many times to repeat the last literal, so append that many + copies to our buffer of decoded symbols (dbuf) now. (The last + literal used is the one at the head of the mtfSymbol array.) */ + if(runPos) { + runPos=0; +#ifdef ENABLE_BUNZIP_CHECKING + if(dbufCount+t>=dbufSize) return RETVAL_DATA_ERROR; +#endif + + uc = symToByte[mtfSymbol[0]]; + byteCount[uc] += t; + while(t--) dbuf[dbufCount++]=uc; + } + /* Is this the terminating symbol? */ + if(nextSym>symTotal) break; + /* At this point, nextSym indicates a new literal character. Subtract + one to get the position in the MTF array at which this literal is + currently to be found. (Note that the result can't be -1 or 0, + because 0 and 1 are RUNA and RUNB. But another instance of the + first symbol in the mtf array, position 0, would have been handled + as part of a run above. Therefore 1 unused mtf position minus + 2 non-literal nextSym values equals -1.) */ +#ifdef ENABLE_BUNZIP_CHECKING + if(dbufCount>=dbufSize) return RETVAL_DATA_ERROR; +#endif + i = nextSym - 1; + uc = mtfSymbol[i]; + /* Adjust the MTF array. Since we typically expect to move only a + * small number of symbols, and are bound by 256 in any case, using + * memmove here would typically be bigger and slower due to function + * call overhead and other assorted setup costs. */ + do { + mtfSymbol[i] = mtfSymbol[i-1]; + } while (--i); + mtfSymbol[0] = uc; + uc=symToByte[uc]; + /* We have our literal byte. Save it into dbuf. */ + byteCount[uc]++; + dbuf[dbufCount++] = (unsigned int)uc; + } + /* At this point, we've read all the huffman-coded symbols (and repeated + runs) for this block from the input stream, and decoded them into the + intermediate buffer. There are dbufCount many decoded bytes in dbuf[]. + Now undo the Burrows-Wheeler transform on dbuf. + See http://dogma.net/markn/articles/bwt/bwt.htm + */ + /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */ + j=0; + for(i=0;i<256;i++) { + k=j+byteCount[i]; + byteCount[i] = j; + j=k; + } + /* Figure out what order dbuf would be in if we sorted it. */ + for (i=0;i=dbufCount) return RETVAL_DATA_ERROR; +#endif + bd->writePos=dbuf[origPtr]; + bd->writeCurrent=(unsigned char)(bd->writePos&0xff); + bd->writePos>>=8; + bd->writeRunCountdown=5; + } + bd->writeCount=dbufCount; + + return RETVAL_OK; +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds new file mode 100644 index 0000000000..6a91b49c25 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(load_and_run) +SECTIONS { + . = 0x81000000-0x4000; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds.in b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds.in new file mode 100644 index 0000000000..95cf83ebd1 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/decompress_bunzip2.lds.in @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(load_and_run) +SECTIONS { + . = BZ_TEXT_START; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/head.S b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/head.S new file mode 100644 index 0000000000..c3ecdc47f4 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/head.S @@ -0,0 +1,26 @@ +/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ +/* Licensed under the linux kernel's version of the GPL. */ + +#include +#include + + .text + LEAF(startup) + .set noreorder + + li t1, BZ_TEXT_START + add a0, t1, 0 + la a1, code_start + la a2, code_stop +$L1: + lw t0, 0(a1) + sw t0, 0(a0) + add a1, 4 + add a0, 4 + blt a1, a2, $L1 + + add sp, t1, -4 + jal t1 + + .set reorder + END(startup) diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds new file mode 100644 index 0000000000..9d95adbfa8 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(startup) +SECTIONS { + . = 0x80001000; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds.in b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds.in new file mode 100644 index 0000000000..20f2ea98ec --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/compressed/vmlinux.lds.in @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(startup) +SECTIONS { + . = TEXT_START; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/gpio.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/gpio.c new file mode 100644 index 0000000000..d20b763338 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/gpio.c @@ -0,0 +1,158 @@ +/* + * GPIO char driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static void *gpio_sbh; +static int gpio_major; +static devfs_handle_t gpio_dir; +static struct { + char *name; + devfs_handle_t handle; +} gpio_file[] = { + { "in", NULL }, + { "out", NULL }, + { "outen", NULL }, + { "control", NULL } +}; + +static int +gpio_open(struct inode *inode, struct file * file) +{ + if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file)) + return -ENODEV; + + MOD_INC_USE_COUNT; + return 0; +} + +static int +gpio_release(struct inode *inode, struct file * file) +{ + MOD_DEC_USE_COUNT; + return 0; +} + +static ssize_t +gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos) +{ + u32 val; + + switch (MINOR(file->f_dentry->d_inode->i_rdev)) { + case 0: + val = sb_gpioin(gpio_sbh); + break; + case 1: + val = sb_gpioout(gpio_sbh, 0, 0); + break; + case 2: + val = sb_gpioouten(gpio_sbh, 0, 0); + break; + case 3: + val = sb_gpiocontrol(gpio_sbh, 0, 0); + break; + default: + return -ENODEV; + } + + if (put_user(val, (u32 *) buf)) + return -EFAULT; + + return sizeof(val); +} + +static ssize_t +gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +{ + u32 val; + + if (get_user(val, (u32 *) buf)) + return -EFAULT; + + switch (MINOR(file->f_dentry->d_inode->i_rdev)) { + case 0: + return -EACCES; + case 1: + sb_gpioout(gpio_sbh, ~0, val); + break; + case 2: + sb_gpioouten(gpio_sbh, ~0, val); + break; + case 3: + sb_gpiocontrol(gpio_sbh, ~0, val); + break; + default: + return -ENODEV; + } + + return sizeof(val); +} + +static struct file_operations gpio_fops = { + owner: THIS_MODULE, + open: gpio_open, + release: gpio_release, + read: gpio_read, + write: gpio_write, +}; + +static int __init +gpio_init(void) +{ + int i; + + if (!(gpio_sbh = sb_kattach())) + return -ENODEV; + + sb_gpiosetcore(gpio_sbh); + + if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0) + return gpio_major; + + gpio_dir = devfs_mk_dir(NULL, "gpio", NULL); + + for (i = 0; i < ARRAYSIZE(gpio_file); i++) { + gpio_file[i].handle = devfs_register(gpio_dir, + gpio_file[i].name, + DEVFS_FL_DEFAULT, gpio_major, i, + S_IFCHR | S_IRUGO | S_IWUGO, + &gpio_fops, NULL); + } + + return 0; +} + +static void __exit +gpio_exit(void) +{ + int i; + + for (i = 0; i < ARRAYSIZE(gpio_file); i++) + devfs_unregister(gpio_file[i].handle); + devfs_unregister(gpio_dir); + devfs_unregister_chrdev(gpio_major, "gpio"); + sb_detach(gpio_sbh); +} + +module_init(gpio_init); +module_exit(gpio_exit); diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram.c new file mode 100644 index 0000000000..af12ced3ff --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram.c @@ -0,0 +1,317 @@ +/* + * NVRAM variable manipulation (common) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include + +extern struct nvram_tuple * _nvram_realloc(struct nvram_tuple *t, const char *name, const char *value); +extern void _nvram_free(struct nvram_tuple *t); +extern int _nvram_read(void *buf); + +char * _nvram_get(const char *name); +int _nvram_set(const char *name, const char *value); +int _nvram_unset(const char *name); +int _nvram_getall(char *buf, int count); +int _nvram_commit(struct nvram_header *header); +int _nvram_init(void); +void _nvram_exit(void); + +static struct nvram_tuple * nvram_hash[257]; +static struct nvram_tuple * nvram_dead; + +/* Free all tuples. Should be locked. */ +static void +nvram_free(void) +{ + uint i; + struct nvram_tuple *t, *next; + + /* Free hash table */ + for (i = 0; i < ARRAYSIZE(nvram_hash); i++) { + for (t = nvram_hash[i]; t; t = next) { + next = t->next; + _nvram_free(t); + } + nvram_hash[i] = NULL; + } + + /* Free dead table */ + for (t = nvram_dead; t; t = next) { + next = t->next; + _nvram_free(t); + } + nvram_dead = NULL; + + /* Indicate to per-port code that all tuples have been freed */ + _nvram_free(NULL); +} + +/* String hash */ +static INLINE uint +hash(const char *s) +{ + uint hash = 0; + + while (*s) + hash = 31 * hash + *s++; + + return hash; +} + +/* (Re)initialize the hash table. Should be locked. */ +static int +nvram_rehash(struct nvram_header *header) +{ + char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq; + + /* (Re)initialize hash table */ + nvram_free(); + + /* Parse and set "name=value\0 ... \0\0" */ + name = (char *) &header[1]; + end = (char *) header + NVRAM_SPACE - 2; + end[0] = end[1] = '\0'; + for (; *name; name = value + strlen(value) + 1) { + if (!(eq = strchr(name, '='))) + break; + *eq = '\0'; + value = eq + 1; + _nvram_set(name, value); + *eq = '='; + } + + /* Set special SDRAM parameters */ + if (!_nvram_get("sdram_init")) { + sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16)); + _nvram_set("sdram_init", buf); + } + if (!_nvram_get("sdram_config")) { + sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff)); + _nvram_set("sdram_config", buf); + } + if (!_nvram_get("sdram_refresh")) { + sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff)); + _nvram_set("sdram_refresh", buf); + } + if (!_nvram_get("sdram_ncdl")) { + sprintf(buf, "0x%08X", header->config_ncdl); + _nvram_set("sdram_ncdl", buf); + } + + return 0; +} + +/* Get the value of an NVRAM variable. Should be locked. */ +char * +_nvram_get(const char *name) +{ + uint i; + struct nvram_tuple *t; + char *value; + + if (!name) + return NULL; + + /* Hash the name */ + i = hash(name) % ARRAYSIZE(nvram_hash); + + /* Find the associated tuple in the hash table */ + for (t = nvram_hash[i]; t && strcmp(t->name, name); t = t->next); + + value = t ? t->value : NULL; + + return value; +} + +/* Get the value of an NVRAM variable. Should be locked. */ +int +_nvram_set(const char *name, const char *value) +{ + uint i; + struct nvram_tuple *t, *u, **prev; + + /* Hash the name */ + i = hash(name) % ARRAYSIZE(nvram_hash); + + /* Find the associated tuple in the hash table */ + for (prev = &nvram_hash[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); + + /* (Re)allocate tuple */ + if (!(u = _nvram_realloc(t, name, value))) + return -12; /* -ENOMEM */ + + /* Value reallocated */ + if (t && t == u) + return 0; + + /* Move old tuple to the dead table */ + if (t) { + *prev = t->next; + t->next = nvram_dead; + nvram_dead = t; + } + + /* Add new tuple to the hash table */ + u->next = nvram_hash[i]; + nvram_hash[i] = u; + + return 0; +} + +/* Unset the value of an NVRAM variable. Should be locked. */ +int +_nvram_unset(const char *name) +{ + uint i; + struct nvram_tuple *t, **prev; + + if (!name) + return 0; + + /* Hash the name */ + i = hash(name) % ARRAYSIZE(nvram_hash); + + /* Find the associated tuple in the hash table */ + for (prev = &nvram_hash[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); + + /* Move it to the dead table */ + if (t) { + *prev = t->next; + t->next = nvram_dead; + nvram_dead = t; + } + + return 0; +} + +/* Get all NVRAM variables. Should be locked. */ +int +_nvram_getall(char *buf, int count) +{ + uint i; + struct nvram_tuple *t; + int len = 0; + + bzero(buf, count); + + /* Write name=value\0 ... \0\0 */ + for (i = 0; i < ARRAYSIZE(nvram_hash); i++) { + for (t = nvram_hash[i]; t; t = t->next) { + if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1)) + len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1; + else + break; + } + } + + return 0; +} + +/* Regenerate NVRAM. Should be locked. */ +int +_nvram_commit(struct nvram_header *header) +{ + char *init, *config, *refresh, *ncdl; + char *ptr, *end; + int i; + struct nvram_tuple *t; + struct nvram_header tmp; + uint8 crc; + + /* Regenerate header */ + header->magic = NVRAM_MAGIC; + header->crc_ver_init = (NVRAM_VERSION << 8); + if (!(init = _nvram_get("sdram_init")) || + !(config = _nvram_get("sdram_config")) || + !(refresh = _nvram_get("sdram_refresh")) || + !(ncdl = _nvram_get("sdram_ncdl"))) { + header->crc_ver_init |= SDRAM_INIT << 16; + header->config_refresh = SDRAM_CONFIG; + header->config_refresh |= SDRAM_REFRESH << 16; + header->config_ncdl = 0; + } else { + header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16; + header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff; + header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16; + header->config_ncdl = bcm_strtoul(ncdl, NULL, 0); + } + + /* Clear data area */ + ptr = (char *) header + sizeof(struct nvram_header); + bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header)); + + /* Leave space for a double NUL at the end */ + end = (char *) header + NVRAM_SPACE - 2; + + /* Write out all tuples */ + for (i = 0; i < ARRAYSIZE(nvram_hash); i++) { + for (t = nvram_hash[i]; t; t = t->next) { + if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end) + break; + ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1; + } + } + + /* End with a double NUL */ + ptr += 2; + + /* Set new length */ + header->len = ROUNDUP(ptr - (char *) header, 4); + + /* Little-endian CRC8 over the last 11 bytes of the header */ + tmp.crc_ver_init = htol32(header->crc_ver_init); + tmp.config_refresh = htol32(header->config_refresh); + tmp.config_ncdl = htol32(header->config_ncdl); + crc = crc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE); + + /* Continue CRC8 over data bytes */ + crc = crc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc); + + /* Set new CRC8 */ + header->crc_ver_init |= crc; + + /* Reinitialize hash table */ + return nvram_rehash(header); +} + +/* Initialize hash table. Should be locked. */ +int +_nvram_init(void) +{ + struct nvram_header *header; + int ret; + + if (!(header = (struct nvram_header *) MALLOC(NVRAM_SPACE))) { + printf("nvram_init: out of memory\n"); + return -12; /* -ENOMEM */ + } + + if ((ret = _nvram_read(header)) == 0 && + header->magic == NVRAM_MAGIC) + nvram_rehash(header); + + MFREE(header, NVRAM_SPACE); + return ret; +} + +/* Free hash table. Should be locked. */ +void +_nvram_exit(void) +{ + nvram_free(); +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram_linux.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram_linux.c new file mode 100644 index 0000000000..bbbc1eb735 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/nvram_linux.c @@ -0,0 +1,638 @@ +/* + * NVRAM variable manipulation (Linux kernel half) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ +static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); + +#ifdef MODULE + +#define early_nvram_get(name) nvram_get(name) + +#else /* !MODULE */ + +/* Global SB handle */ +extern void *bcm947xx_sbh; +extern spinlock_t bcm947xx_sbh_lock; + +/* Convenience */ +#define sbh bcm947xx_sbh +#define sbh_lock bcm947xx_sbh_lock +#define KB * 1024 +#define MB * 1024 * 1024 + +/* Probe for NVRAM header */ +static void __init +early_nvram_init(void) +{ + struct nvram_header *header; + chipcregs_t *cc; + struct sflash *info = NULL; + int i; + uint32 base, off, lim; + + if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { + base = CC_FLASH_BASE; + switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { + case PFLASH: + lim = CC_FLASH_MAX; + break; + + case SFLASH_ST: + case SFLASH_AT: + if ((info = sflash_init(cc)) == NULL) + return; + lim = info->size; + break; + + case FLASH_NONE: + default: + return; + } + } else { + /* extif assumed, Stop at 4 MB */ + base = FLASH_BASE; + lim = FLASH_MAX; + } + + off = FLASH_MIN; + while (off <= lim) { + /* Windowed flash access */ + header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); + if (header->magic == NVRAM_MAGIC) { + u32 *src = (u32 *) header; + u32 *dst = (u32 *) nvram_buf; + for (i = 0; i < sizeof(struct nvram_header); i += 4) + *dst++ = *src++; + for (; i < header->len && i < NVRAM_SPACE; i += 4) + *dst++ = ltoh32(*src++); + return; + } + + /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ + if (off == 1 KB) + break; + else if (off == 4 KB) + off = 1 KB; + else if (off == lim) + off = 4 KB; + else + off <<= 1; + } +} + +/* Early (before mm or mtd) read-only access to NVRAM */ +static char * __init +early_nvram_get(const char *name) +{ + char *var, *value, *end, *eq; + + if (!name) + return NULL; + + if (!nvram_buf[0]) + early_nvram_init(); + + /* Look for name=value and return value */ + var = &nvram_buf[sizeof(struct nvram_header)]; + end = nvram_buf + sizeof(nvram_buf) - 2; + end[0] = end[1] = '\0'; + for (; *var; var = value + strlen(value) + 1) { + if (!(eq = strchr(var, '='))) + break; + value = eq + 1; + if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) + return value; + } + + return NULL; +} + +#endif /* !MODULE */ + +extern char * _nvram_get(const char *name); +extern int _nvram_set(const char *name, const char *value); +extern int _nvram_unset(const char *name); +extern int _nvram_getall(char *buf, int count); +extern int _nvram_commit(struct nvram_header *header); +extern int _nvram_init(void); +extern void _nvram_exit(void); + +/* Globals */ +static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED; +static struct semaphore nvram_sem; +static unsigned long nvram_offset = 0; +static int nvram_major = -1; +static devfs_handle_t nvram_handle = NULL; +static struct mtd_info *nvram_mtd = NULL; + +int +_nvram_read(char *buf) +{ + struct nvram_header *header = (struct nvram_header *) buf; + size_t len; + + if (!nvram_mtd || + MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) || + len != NVRAM_SPACE || + header->magic != NVRAM_MAGIC) { + /* Maybe we can recover some data from early initialization */ + memcpy(buf, nvram_buf, NVRAM_SPACE); + } + + return 0; +} + +struct nvram_tuple * +_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value) +{ + if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE) + return NULL; + + if (!t) { + if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC))) + return NULL; + + /* Copy name */ + t->name = (char *) &t[1]; + strcpy(t->name, name); + + t->value = NULL; + } + + /* Copy value */ + if (!t->value || strcmp(t->value, value)) { + t->value = &nvram_buf[nvram_offset]; + strcpy(t->value, value); + nvram_offset += strlen(value) + 1; + } + + return t; +} + +void +_nvram_free(struct nvram_tuple *t) +{ + if (!t) + nvram_offset = 0; + else + kfree(t); +} + +int +nvram_set(const char *name, const char *value) +{ + unsigned long flags; + int ret; + struct nvram_header *header; + + spin_lock_irqsave(&nvram_lock, flags); + if ((ret = _nvram_set(name, value))) { + /* Consolidate space and try again */ + if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) { + if (_nvram_commit(header) == 0) + ret = _nvram_set(name, value); + kfree(header); + } + } + spin_unlock_irqrestore(&nvram_lock, flags); + + return ret; +} + +char * +real_nvram_get(const char *name) +{ + unsigned long flags; + char *value; + + spin_lock_irqsave(&nvram_lock, flags); + value = _nvram_get(name); + spin_unlock_irqrestore(&nvram_lock, flags); + + return value; +} + +char * +nvram_get(const char *name) +{ + if (nvram_major >= 0) + return real_nvram_get(name); + else + return early_nvram_get(name); +} + +int +nvram_unset(const char *name) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&nvram_lock, flags); + ret = _nvram_unset(name); + spin_unlock_irqrestore(&nvram_lock, flags); + + return ret; +} + +static void +erase_callback(struct erase_info *done) +{ + wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv; + wake_up(wait_q); +} + +int +nvram_commit(void) +{ + char *buf; + size_t erasesize, len; + unsigned int i; + int ret; + struct nvram_header *header; + unsigned long flags; + u_int32_t offset; + DECLARE_WAITQUEUE(wait, current); + wait_queue_head_t wait_q; + struct erase_info erase; + + printk("nvram_commit(): init\n"); + + if (!nvram_mtd) { + printk("nvram_commit: NVRAM not found\n"); + return -ENODEV; + } + + if (in_interrupt()) { + printk("nvram_commit: not committing in interrupt\n"); + return -EINVAL; + } + + /* Backup sector blocks to be erased */ + erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize); + if (!(buf = kmalloc(erasesize, GFP_KERNEL))) { + printk("nvram_commit: out of memory\n"); + return -ENOMEM; + } + + down(&nvram_sem); +#if 0 + offset = nvram_mtd->size - erasesize; + i = erasesize - NVRAM_SPACE; + ret = MTD_READ(nvram_mtd, offset, i, &len, buf); + if (ret || len != i) { + printk("nvram_commit: read error\n"); + ret = -EIO; + goto done; +#endif + if ((i = erasesize - NVRAM_SPACE) > 0) { + offset = nvram_mtd->size - erasesize; + len = 0; + ret = MTD_READ(nvram_mtd, offset, i, &len, buf); + if (ret || len != i) { + printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i); + ret = -EIO; + goto done; + } + header = (struct nvram_header *)(buf + i); + } else { + offset = nvram_mtd->size - NVRAM_SPACE; + header = (struct nvram_header *)buf; + } + + /* Regenerate NVRAM */ + spin_lock_irqsave(&nvram_lock, flags); + ret = _nvram_commit(header); + spin_unlock_irqrestore(&nvram_lock, flags); + if (ret) + goto done; + + /* Erase sector blocks */ + init_waitqueue_head(&wait_q); + for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) { + erase.mtd = nvram_mtd; + erase.addr = offset; + erase.len = nvram_mtd->erasesize; + erase.callback = erase_callback; + erase.priv = (u_long) &wait_q; + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&wait_q, &wait); + + /* Unlock sector blocks */ + if (nvram_mtd->unlock) + nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize); + + if ((ret = MTD_ERASE(nvram_mtd, &erase))) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&wait_q, &wait); + printk("nvram_commit: erase error\n"); + goto done; + } + + /* Wait for erase to finish */ + schedule(); + remove_wait_queue(&wait_q, &wait); + } + + /* Write partition up to end of data area */ + offset = nvram_mtd->size - erasesize; + i = erasesize - NVRAM_SPACE + header->len; + ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf); + if (ret || len != i) { + printk("nvram_commit: write error\n"); + ret = -EIO; + goto done; + } + /* + * Reading a few bytes back here will put the device + * back to the correct mode on certain flashes */ + + offset = nvram_mtd->size - erasesize; + ret = MTD_READ(nvram_mtd, offset, 4, &len, buf); + + done: + up(&nvram_sem); + kfree(buf); + printk("nvram_commit(): end\n"); + return ret; +} + +int +nvram_getall(char *buf, int count) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&nvram_lock, flags); + ret = _nvram_getall(buf, count); + spin_unlock_irqrestore(&nvram_lock, flags); + + return ret; +} + +EXPORT_SYMBOL(nvram_get); +EXPORT_SYMBOL(nvram_getall); +EXPORT_SYMBOL(nvram_set); +EXPORT_SYMBOL(nvram_unset); +EXPORT_SYMBOL(nvram_commit); + +/* User mode interface below */ + +static ssize_t +dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos) +{ + char tmp[100], *name = tmp, *value; + ssize_t ret; + unsigned long off; + + if (count > sizeof(tmp)) { + if (!(name = kmalloc(count, GFP_KERNEL))) + return -ENOMEM; + } + + if (copy_from_user(name, buf, count)) { + ret = -EFAULT; + goto done; + } + + if (*name == '\0') { + /* Get all variables */ + ret = nvram_getall(name, count); + if (ret == 0) { + if (copy_to_user(buf, name, count)) { + ret = -EFAULT; + goto done; + } + ret = count; + } + } else { + if (!(value = nvram_get(name))) { + ret = 0; + goto done; + } + + /* Provide the offset into mmap() space */ + off = (unsigned long) value - (unsigned long) nvram_buf; + + if (put_user(off, (unsigned long *) buf)) { + ret = -EFAULT; + goto done; + } + + ret = sizeof(unsigned long); + } + + flush_cache_all(); + +done: + if (name != tmp) + kfree(name); + + return ret; +} + +static ssize_t +dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +{ + char tmp[100], *name = tmp, *value; + ssize_t ret; + + if (count > sizeof(tmp)) { + if (!(name = kmalloc(count, GFP_KERNEL))) + return -ENOMEM; + } + + if (copy_from_user(name, buf, count)) { + ret = -EFAULT; + goto done; + } + + value = name; + name = strsep(&value, "="); + if (value) + ret = nvram_set(name, value) ? : count; + else + ret = nvram_unset(name) ? : count; + + done: + if (name != tmp) + kfree(name); + + return ret; +} + +static int +dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + if (cmd != NVRAM_MAGIC) + return -EINVAL; + return nvram_commit(); +} + +static int +dev_nvram_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long offset = virt_to_phys(nvram_buf); + + if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} + +static int +dev_nvram_open(struct inode *inode, struct file * file) +{ + MOD_INC_USE_COUNT; + return 0; +} + +static int +dev_nvram_release(struct inode *inode, struct file * file) +{ + MOD_DEC_USE_COUNT; + return 0; +} + +static struct file_operations dev_nvram_fops = { + owner: THIS_MODULE, + open: dev_nvram_open, + release: dev_nvram_release, + read: dev_nvram_read, + write: dev_nvram_write, + ioctl: dev_nvram_ioctl, + mmap: dev_nvram_mmap, +}; + +static void +dev_nvram_exit(void) +{ + int order = 0; + struct page *page, *end; + + if (nvram_handle) + devfs_unregister(nvram_handle); + + if (nvram_major >= 0) + devfs_unregister_chrdev(nvram_major, "nvram"); + + if (nvram_mtd) + put_mtd_device(nvram_mtd); + + while ((PAGE_SIZE << order) < NVRAM_SPACE) + order++; + end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); + for (page = virt_to_page(nvram_buf); page <= end; page++) + mem_map_unreserve(page); + + _nvram_exit(); +} + +static int __init +dev_nvram_init(void) +{ + int order = 0, ret = 0; + struct page *page, *end; + unsigned int i; + + /* Allocate and reserve memory to mmap() */ + while ((PAGE_SIZE << order) < NVRAM_SPACE) + order++; + end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); + for (page = virt_to_page(nvram_buf); page <= end; page++) + mem_map_reserve(page); + +#ifdef CONFIG_MTD + /* Find associated MTD device */ + for (i = 0; i < MAX_MTD_DEVICES; i++) { + nvram_mtd = get_mtd_device(NULL, i); + if (nvram_mtd) { + if (!strcmp(nvram_mtd->name, "nvram") && + nvram_mtd->size >= NVRAM_SPACE) + break; + put_mtd_device(nvram_mtd); + } + } + if (i >= MAX_MTD_DEVICES) + nvram_mtd = NULL; +#endif + + /* Initialize hash table lock */ + spin_lock_init(&nvram_lock); + + /* Initialize commit semaphore */ + init_MUTEX(&nvram_sem); + + /* Register char device */ + if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) { + ret = nvram_major; + goto err; + } + + /* Initialize hash table */ + _nvram_init(); + + /* Create /dev/nvram handle */ + nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0, + S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL); + + /* Set the SDRAM NCDL value into NVRAM if not already done */ + if (getintvar(NULL, "sdram_ncdl") == 0) { + unsigned int ncdl; + char buf[] = "0x00000000"; + + if ((ncdl = sb_memc_get_ncdl(sbh))) { + sprintf(buf, "0x%08x", ncdl); + nvram_set("sdram_ncdl", buf); + nvram_commit(); + } + } + + return 0; + + err: + dev_nvram_exit(); + return ret; +} + +module_init(dev_nvram_init); +module_exit(dev_nvram_exit); diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/pcibios.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/pcibios.c new file mode 100644 index 0000000000..4077a79f34 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/pcibios.c @@ -0,0 +1,352 @@ +/* + * Low-Level PCI and SB support for BCM47xx (Linux support code) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Global SB handle */ +extern void *bcm947xx_sbh; +extern spinlock_t bcm947xx_sbh_lock; + +/* Convenience */ +#define sbh bcm947xx_sbh +#define sbh_lock bcm947xx_sbh_lock + +static int +sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value)); + spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int +sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value)); + spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int +sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value)); + spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int +sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value)); + spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int +sbpci_write_config_word(struct pci_dev *dev, int where, u16 value) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value)); + spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int +sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value)); + spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pcibios_ops = { + sbpci_read_config_byte, + sbpci_read_config_word, + sbpci_read_config_dword, + sbpci_write_config_byte, + sbpci_write_config_word, + sbpci_write_config_dword +}; + + +void __init +pcibios_init(void) +{ + ulong flags; + + if (!(sbh = sb_kattach())) + panic("sb_kattach failed"); + spin_lock_init(&sbh_lock); + + spin_lock_irqsave(&sbh_lock, flags); + sbpci_init(sbh); + spin_unlock_irqrestore(&sbh_lock, flags); + + set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); + + /* Scan the SB bus */ + pci_scan_bus(0, &pcibios_ops, NULL); + +} + +char * __init +pcibios_setup(char *str) +{ + if (!strncmp(str, "ban=", 4)) { + sbpci_ban(simple_strtoul(str + 4, NULL, 0)); + return NULL; + } + + return (str); +} + +static u32 pci_iobase = 0x100; +static u32 pci_membase = SB_PCI_DMA; + +void __init +pcibios_fixup_bus(struct pci_bus *b) +{ + struct list_head *ln; + struct pci_dev *d; + struct resource *res; + int pos, size; + u32 *base; + u8 irq; + + printk("PCI: Fixing up bus %d\n", b->number); + + /* Fix up SB */ + if (b->number == 0) { + for (ln=b->devices.next; ln != &b->devices; ln=ln->next) { + d = pci_dev_b(ln); + /* Fix up interrupt lines */ + pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq); + d->irq = irq + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); + } + } + + /* Fix up external PCI */ + else { + for (ln=b->devices.next; ln != &b->devices; ln=ln->next) { + d = pci_dev_b(ln); + /* Fix up resource bases */ + for (pos = 0; pos < 6; pos++) { + res = &d->resource[pos]; + base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase; + if (res->end) { + size = res->end - res->start + 1; + if (*base & (size - 1)) + *base = (*base + size) & ~(size - 1); + res->start = *base; + res->end = res->start + size - 1; + *base += size; + pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); + } + /* Fix up PCI bridge BAR0 only */ + if (b->number == 1 && PCI_SLOT(d->devfn) == 0) + break; + } + /* Fix up interrupt lines */ + if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL)) + d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); + } + } +} + +unsigned int +pcibios_assign_all_busses(void) +{ + return 1; +} + +void +pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) +{ +} + +int +pcibios_enable_resources(struct pci_dev *dev) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + /* External PCI only */ + if (dev->bus->number == 0) + return 0; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + r = &dev->resource[idx]; + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +int +pcibios_enable_device(struct pci_dev *dev, int mask) +{ + ulong flags; + uint coreidx; + + /* External PCI device enable */ + if (dev->bus->number != 0) + return pcibios_enable_resources(dev); + + /* These cores come out of reset enabled */ + if (dev->device == SB_MIPS || + dev->device == SB_MIPS33 || + dev->device == SB_EXTIF || + dev->device == SB_CC) + return 0; + + spin_lock_irqsave(&sbh_lock, flags); + coreidx = sb_coreidx(sbh); + if (!sb_setcoreidx(sbh, PCI_SLOT(dev->devfn))) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * The USB core requires a special bit to be set during core + * reset to enable host (OHCI) mode. Resetting the SB core in + * pcibios_enable_device() is a hack for compatibility with + * vanilla usb-ohci so that it does not have to know about + * SB. A driver that wants to use the USB core in device mode + * should know about SB and should reset the bit back to 0 + * after calling pcibios_enable_device(). + */ + if (sb_coreid(sbh) == SB_USB) { + sb_core_disable(sbh, sb_coreflags(sbh, 0, 0)); + sb_core_reset(sbh, 1 << 29); + } else + sb_core_reset(sbh, 0); + + sb_setcoreidx(sbh, coreidx); + spin_unlock_irqrestore(&sbh_lock, flags); + + return 0; +} + +void +pcibios_update_resource(struct pci_dev *dev, struct resource *root, + struct resource *res, int resource) +{ + unsigned long where, size; + u32 reg; + + /* External PCI only */ + if (dev->bus->number == 0) + return; + + where = PCI_BASE_ADDRESS_0 + (resource * 4); + size = res->end - res->start; + pci_read_config_dword(dev, where, ®); + reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); + pci_write_config_dword(dev, where, reg); +} + +static void __init +quirk_sbpci_bridge(struct pci_dev *dev) +{ + if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0) + return; + + printk("PCI: Fixing up bridge\n"); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + pcibios_enable_resources(dev); + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3); +} + +/* + * If we set up a device for bus mastering, we need to check the latency + * timer as certain crappy BIOSes forget to set it properly. + */ +unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +struct pci_fixup pcibios_fixups[] = { + { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge }, + { 0 } +}; diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/perfcntr.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/perfcntr.c new file mode 100644 index 0000000000..aa0608e6e3 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/perfcntr.c @@ -0,0 +1,67 @@ +/* + * Broadcom BCM47xx Performance Counter /proc/cpuinfo support + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include + +/* + * BCM4710 performance counter register select values + * No even-odd control-counter mapping, just counters + */ +#define PERF_DCACHE_HIT 0 +#define PERF_DCACHE_MISS 1 +#define PERF_ICACHE_HIT 2 +#define PERF_ICACHE_MISS 3 +#define PERF_ICOUNT 4 + +/* + * Move from Coprocessor 0 Register 25 Select n + * data <- CPR[0,25,n] + * GPR[1] <- data + */ +#define read_bcm4710_perf_cntr(n) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + ".set\tnoat\n\t" \ + ".word\t"STR(0x4001c800|(n))"\n\t" \ + "move\t%0,$1\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + :"=r" (__res)); \ + __res;}) + +asmlinkage unsigned int read_perf_cntr(unsigned int counter) +{ + switch (counter) { + case PERF_DCACHE_HIT: return read_bcm4710_perf_cntr(PERF_DCACHE_HIT); + case PERF_DCACHE_MISS: return read_bcm4710_perf_cntr(PERF_DCACHE_MISS); + case PERF_ICACHE_HIT: return read_bcm4710_perf_cntr(PERF_ICACHE_HIT); + case PERF_ICACHE_MISS: return read_bcm4710_perf_cntr(PERF_ICACHE_MISS); + case PERF_ICOUNT: return read_bcm4710_perf_cntr(PERF_ICOUNT); + } + return 0; +} + +asmlinkage void write_perf_cntr(unsigned int counter, unsigned int val) +{ +} + +asmlinkage unsigned int read_perf_cntl(unsigned int counter) +{ + return 0; +} + +asmlinkage void write_perf_cntl(unsigned int counter, unsigned int val) +{ +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/prom.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/prom.c new file mode 100644 index 0000000000..e41f44b9e2 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/prom.c @@ -0,0 +1,41 @@ +/* + * Early initialization code for BCM94710 boards + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include + +void __init +prom_init(int argc, const char **argv) +{ + unsigned long mem; + + mips_machgroup = MACH_GROUP_BRCM; + mips_machtype = MACH_BCM947XX; + + /* Figure out memory size by finding aliases */ + for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { + if (*(unsigned long *)((unsigned long)(prom_init) + mem) == + *(unsigned long *)(prom_init)) + break; + } + add_memory_region(0, mem, BOOT_MEM_RAM); +} + +void __init +prom_free_prom_memory(void) +{ +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbmips.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbmips.c new file mode 100644 index 0000000000..6daaeb78c0 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbmips.c @@ -0,0 +1,951 @@ +/* + * BCM47XX Sonics SiliconBackplane MIPS core routines + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Memory segments (32bit kernel mode addresses) + */ +#undef KUSEG +#undef KSEG0 +#undef KSEG1 +#undef KSEG2 +#undef KSEG3 +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 + +/* + * Map an address to a certain kernel segment + */ +#undef KSEG0ADDR +#undef KSEG1ADDR +#undef KSEG2ADDR +#undef KSEG3ADDR +#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) +#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) +#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) +#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) + +/* + * The following macros are especially useful for __asm__ + * inline assembler. + */ +#ifndef __STR +#define __STR(x) #x +#endif +#ifndef STR +#define STR(x) __STR(x) +#endif + +/* ********************************************************************* + * CP0 Registers + ********************************************************************* */ + +#define C0_INX 0 /* CP0: TLB Index */ +#define C0_RAND 1 /* CP0: TLB Random */ +#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ +#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ +#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ +#define C0_CTEXT 4 /* CP0: Context */ +#define C0_PGMASK 5 /* CP0: TLB PageMask */ +#define C0_WIRED 6 /* CP0: TLB Wired */ +#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ +#define C0_COUNT 9 /* CP0: Count */ +#define C0_TLBHI 10 /* CP0: TLB EntryHi */ +#define C0_COMPARE 11 /* CP0: Compare */ +#define C0_SR 12 /* CP0: Processor Status */ +#define C0_STATUS C0_SR /* CP0: Processor Status */ +#define C0_CAUSE 13 /* CP0: Exception Cause */ +#define C0_EPC 14 /* CP0: Exception PC */ +#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ +#define C0_CONFIG 16 /* CP0: Config */ +#define C0_LLADDR 17 /* CP0: LLAddr */ +#define C0_WATCHLO 18 /* CP0: WatchpointLo */ +#define C0_WATCHHI 19 /* CP0: WatchpointHi */ +#define C0_XCTEXT 20 /* CP0: XContext */ +#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ +#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ +#define C0_ECC 26 /* CP0: ECC */ +#define C0_CACHEERR 27 /* CP0: CacheErr */ +#define C0_TAGLO 28 /* CP0: TagLo */ +#define C0_TAGHI 29 /* CP0: TagHi */ +#define C0_ERREPC 30 /* CP0: ErrorEPC */ + +/* + * Macros to access the system control coprocessor + */ + +#define MFC0(source, sel) \ +({ \ + int __res; \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + ".set\tnoat\n\t" \ + ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ + "move\t%0,$1\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + :"=r" (__res) \ + : \ + :"$1"); \ + __res; \ +}) + +#define MTC0(source, sel, value) \ +do { \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + ".set\tnoat\n\t" \ + "move\t$1,%z0\n\t" \ + ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + : \ + :"Jr" (value) \ + :"$1"); \ +} while (0) + +/* + * R4x00 interrupt enable / cause bits + */ +#undef IE_SW0 +#undef IE_SW1 +#undef IE_IRQ0 +#undef IE_IRQ1 +#undef IE_IRQ2 +#undef IE_IRQ3 +#undef IE_IRQ4 +#undef IE_IRQ5 +#define IE_SW0 (1<< 8) +#define IE_SW1 (1<< 9) +#define IE_IRQ0 (1<<10) +#define IE_IRQ1 (1<<11) +#define IE_IRQ2 (1<<12) +#define IE_IRQ3 (1<<13) +#define IE_IRQ4 (1<<14) +#define IE_IRQ5 (1<<15) + +/* + * Bitfields in the R4xx0 cp0 status register + */ +#define ST0_IE 0x00000001 +#define ST0_EXL 0x00000002 +#define ST0_ERL 0x00000004 +#define ST0_KSU 0x00000018 +# define KSU_USER 0x00000010 +# define KSU_SUPERVISOR 0x00000008 +# define KSU_KERNEL 0x00000000 +#define ST0_UX 0x00000020 +#define ST0_SX 0x00000040 +#define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 + +/* + * Status register bits available in all MIPS CPUs. + */ +#define ST0_IM 0x0000ff00 +#define ST0_CH 0x00040000 +#define ST0_SR 0x00100000 +#define ST0_TS 0x00200000 +#define ST0_BEV 0x00400000 +#define ST0_RE 0x02000000 +#define ST0_FR 0x04000000 +#define ST0_CU 0xf0000000 +#define ST0_CU0 0x10000000 +#define ST0_CU1 0x20000000 +#define ST0_CU2 0x40000000 +#define ST0_CU3 0x80000000 +#define ST0_XX 0x80000000 /* MIPS IV naming */ + +/* + * Cache Operations + */ + +#ifndef Fill_I +#define Fill_I 0x14 +#endif + +#define cache_unroll(base,op) \ + __asm__ __volatile__(" \ + .set noreorder; \ + .set mips3; \ + cache %1, (%0); \ + .set mips0; \ + .set reorder" \ + : \ + : "r" (base), \ + "i" (op)); + +/* + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#define UART_MCR 4 /* Out: Modem Control Register */ +#define UART_MSR 6 /* In: Modem Status Register */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ + +/* + * Returns TRUE if an external UART exists at the given base + * register. + */ +static bool +serial_exists(uint8 *regs) +{ + uint8 save_mcr, status1; + + save_mcr = R_REG(®s[UART_MCR]); + W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); + status1 = R_REG(®s[UART_MSR]) & 0xf0; + W_REG(®s[UART_MCR], save_mcr); + + return (status1 == 0x90); +} + +/* + * Initializes UART access. The callback function will be called once + * per found UART. +*/ +void +sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) +{ + void *regs; + ulong base; + uint irq; + int i, n; + + if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { + extifregs_t *eir = (extifregs_t *) regs; + sbconfig_t *sb; + + /* Determine external UART register base */ + sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); + base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); + + /* Determine IRQ */ + irq = sb_irq(sbh); + + /* Disable GPIO interrupt initially */ + W_REG(&eir->gpiointpolarity, 0); + W_REG(&eir->gpiointmask, 0); + + /* Search for external UARTs */ + n = 2; + for (i = 0; i < 2; i++) { + regs = (void *) REG_MAP(base + (i * 8), 8); + if (serial_exists(regs)) { + /* Set GPIO 1 to be the external UART IRQ */ + W_REG(&eir->gpiointmask, 2); + if (add) + add(regs, irq, 13500000, 0); + } + } + + /* Add internal UART if enabled */ + if (R_REG(&eir->corecontrol) & CC_UE) + if (add) + add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); + } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { + chipcregs_t *cc = (chipcregs_t *) regs; + uint32 rev, cap, pll, baud_base, div; + + /* Determine core revision and capabilities */ + rev = sb_corerev(sbh); + cap = R_REG(&cc->capabilities); + pll = cap & CAP_PLL_MASK; + + /* Determine IRQ */ + irq = sb_irq(sbh); + + if (pll == PLL_TYPE1) { + /* PLL clock */ + baud_base = sb_clock_rate(pll, + R_REG(&cc->clockcontrol_n), + R_REG(&cc->clockcontrol_m2)); + div = 1; + } else if (rev >= 3) { + /* Internal backplane clock */ + baud_base = sb_clock_rate(pll, + R_REG(&cc->clockcontrol_n), + R_REG(&cc->clockcontrol_sb)); + div = 2; /* Minimum divisor */ + W_REG(&cc->clkdiv, ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div)); + } else { + /* Fixed internal backplane clock */ + baud_base = 88000000; + div = 48; + } + + /* Clock source depends on strapping if UartClkOverride is unset */ + if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { + if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { + /* Internal divided backplane clock */ + baud_base /= div; + } else { + /* Assume external clock of 1.8432 MHz */ + baud_base = 1843200; + } + } + + /* Add internal UARTs */ + n = cap & CAP_UARTS_MASK; + for (i = 0; i < n; i++) { + /* Register offset changed after revision 0 */ + if (rev) + regs = (void *)((ulong) &cc->uart0data + (i * 256)); + else + regs = (void *)((ulong) &cc->uart0data + (i * 8)); + + if (add) + add(regs, irq, baud_base, 0); + } + } +} + +/* Returns the SB interrupt flag of the current core. */ +uint32 +sb_flag(void *sbh) +{ + void *regs; + sbconfig_t *sb; + + regs = sb_coreregs(sbh); + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + + return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK); +} + +static const uint32 sbips_int_mask[] = { + 0, + SBIPS_INT1_MASK, + SBIPS_INT2_MASK, + SBIPS_INT3_MASK, + SBIPS_INT4_MASK +}; + +static const uint32 sbips_int_shift[] = { + 0, + 0, + SBIPS_INT2_SHIFT, + SBIPS_INT3_SHIFT, + SBIPS_INT4_SHIFT +}; + +/* + * Returns the MIPS IRQ assignment of the current core. If unassigned, + * 0 is returned. + */ +uint +sb_irq(void *sbh) +{ + uint idx; + void *regs; + sbconfig_t *sb; + uint32 flag, sbipsflag; + uint irq = 0; + + flag = sb_flag(sbh); + + idx = sb_coreidx(sbh); + + if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || + (regs = sb_setcore(sbh, SB_MIPS33, 0))) { + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + + /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ + sbipsflag = R_REG(&sb->sbipsflag); + for (irq = 1; irq <= 4; irq++) { + if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) + break; + } + if (irq == 5) + irq = 0; + } + + sb_setcoreidx(sbh, idx); + + return irq; +} + +/* Clears the specified MIPS IRQ. */ +static void +sb_clearirq(void *sbh, uint irq) +{ + void *regs; + sbconfig_t *sb; + + if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && + !(regs = sb_setcore(sbh, SB_MIPS33, 0))) + ASSERT(regs); + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + + if (irq == 0) + W_REG(&sb->sbintvec, 0); + else + OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); +} + +/* + * Assigns the specified MIPS IRQ to the specified core. Shared MIPS + * IRQ 0 may be assigned more than once. + */ +static void +sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit) +{ + void *regs; + sbconfig_t *sb; + uint32 flag; + + regs = sb_setcore(sbh, coreid, coreunit); + ASSERT(regs); + flag = sb_flag(sbh); + + if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && + !(regs = sb_setcore(sbh, SB_MIPS33, 0))) + ASSERT(regs); + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + + if (irq == 0) + OR_REG(&sb->sbintvec, 1 << flag); + else { + flag <<= sbips_int_shift[irq]; + ASSERT(!(flag & ~sbips_int_mask[irq])); + flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; + W_REG(&sb->sbipsflag, flag); + } +} + +/* + * Initializes clocks and interrupts. SB and NVRAM access must be + * initialized prior to calling. + */ +void +sb_mips_init(void *sbh) +{ + ulong hz, ns, tmp; + extifregs_t *eir; + chipcregs_t *cc; + char *value; + uint irq; + + /* Figure out current SB clock speed */ + if ((hz = sb_clock(sbh)) == 0) + hz = 100000000; + ns = 1000000000 / hz; + + /* Setup external interface timing */ + if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { + /* Initialize extif so we can get to the LEDs and external UART */ + W_REG(&eir->prog_config, CF_EN); + + /* Set timing for the flash */ + tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ + tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ + tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ + W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ + + /* Set programmable interface timing for external uart */ + tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ + tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ + tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ + tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ + W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ + } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { + /* Set timing for the flash */ + tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ + tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ + tmp |= CEIL(120, ns); /* W0 = 120nS */ + W_REG(&cc->flash_waitcount, tmp); + + W_REG(&cc->pcmcia_memwait, tmp); + } + + /* Chip specific initialization */ + switch (sb_chip(sbh)) { + case BCM4710_DEVICE_ID: + /* Clear interrupt map */ + for (irq = 0; irq <= 4; irq++) + sb_clearirq(sbh, irq); + sb_setirq(sbh, 0, SB_CODEC, 0); + sb_setirq(sbh, 0, SB_EXTIF, 0); + sb_setirq(sbh, 2, SB_ENET, 1); + sb_setirq(sbh, 3, SB_ILINE20, 0); + sb_setirq(sbh, 4, SB_PCI, 0); + ASSERT(eir); + value = nvram_get("et0phyaddr"); + if (value && !strcmp(value, "31")) { + /* Enable internal UART */ + W_REG(&eir->corecontrol, CC_UE); + /* Give USB its own interrupt */ + sb_setirq(sbh, 1, SB_USB, 0); + } else { + /* Disable internal UART */ + W_REG(&eir->corecontrol, 0); + /* Give Ethernet its own interrupt */ + sb_setirq(sbh, 1, SB_ENET, 0); + sb_setirq(sbh, 0, SB_USB, 0); + } + break; + case BCM4310_DEVICE_ID: + MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22)); + break; + } +} + +uint32 +sb_mips_clock(void *sbh) +{ + extifregs_t *eir; + chipcregs_t *cc; + uint32 n, m; + uint idx; + uint32 pll_type, rate = 0; + + /* get index of the current core */ + idx = sb_coreidx(sbh); + pll_type = PLL_TYPE1; + + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { + n = R_REG(&eir->clockcontrol_n); + m = R_REG(&eir->clockcontrol_sb); + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + n = R_REG(&cc->clockcontrol_n); + if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) + m = R_REG(&cc->clockcontrol_mips); + else if (pll_type == PLL_TYPE3) { + rate = 200000000; + goto out; + } else + m = R_REG(&cc->clockcontrol_sb); + } else + goto out; + + /* calculate rate */ + rate = sb_clock_rate(pll_type, n, m); + +out: + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + return rate; +} + +static void +icache_probe(int *size, int *lsize) +{ + uint32 config1; + uint sets, ways; + + config1 = MFC0(C0_CONFIG, 1); + + /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ + if ((*lsize = ((config1 >> 19) & 7))) + *lsize = 2 << *lsize; + sets = 64 << ((config1 >> 22) & 7); + ways = 1 + ((config1 >> 16) & 7); + *size = *lsize * sets * ways; +} + +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) + +static void +handler(void) +{ + /* Step 11 */ + __asm__ ( + ".set\tmips32\n\t" + "ssnop\n\t" + "ssnop\n\t" + /* Disable interrupts */ + /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ + "mfc0 $15, $12\n\t" + "and $15, $15, -31746\n\t" + "mtc0 $15, $12\n\t" + "eret\n\t" + "nop\n\t" + "nop\n\t" + ".set\tmips0" + ); +} + +/* The following MUST come right after handler() */ +static void +afterhandler(void) +{ +} + +/* + * Set the MIPS, backplane and PCI clocks as closely as possible. + */ +bool +sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) +{ + extifregs_t *eir = NULL; + chipcregs_t *cc = NULL; + mipsregs_t *mipsr = NULL; + volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci; + uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio; + uint32 pll_type, sync_mode; + uint idx, i; + typedef struct { + uint32 mipsclock; + uint16 n; + uint32 sb; + uint32 pci33; + uint32 pci25; + } n3m_table_t; + static n3m_table_t type1_table[] = { + { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ + { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ + { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ + { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */ + { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */ + { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */ + { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */ + { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */ + { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */ + { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */ + { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */ + { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */ + { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */ + { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */ + { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */ + { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */ + { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */ + { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */ + { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */ + { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */ + }; + typedef struct { + uint32 mipsclock; + uint32 sbclock; + uint16 n; + uint32 sb; + uint32 pci33; + uint32 m2; + uint32 m3; + uint32 ratio; + uint32 ratio_parm; + } n4m_table_t; + + static n4m_table_t type2_table[] = { + { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, + { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, + { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, + { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, + { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, + { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, + { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, + { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, + { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, + { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, + { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, + { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, + { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, + { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, + { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, + { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, + { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 } + }; + + static n4m_table_t type4_table[] = { + { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, + { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, + { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, + { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 }, + { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, + { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 }, + { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, + { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, + { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, + { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, + { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, + { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 } + }; + uint icache_size, ic_lsize; + ulong start, end, dst; + bool ret = FALSE; + + /* get index of the current core */ + idx = sb_coreidx(sbh); + + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { + pll_type = PLL_TYPE1; + clockcontrol_n = &eir->clockcontrol_n; + clockcontrol_sb = &eir->clockcontrol_sb; + clockcontrol_pci = &eir->clockcontrol_pci; + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + clockcontrol_n = &cc->clockcontrol_n; + clockcontrol_sb = &cc->clockcontrol_sb; + clockcontrol_pci = &cc->clockcontrol_pci; + } else + goto done; + + /* Store the current clock register values */ + orig_n = R_REG(clockcontrol_n); + orig_sb = R_REG(clockcontrol_sb); + orig_pci = R_REG(clockcontrol_pci); + + if (pll_type == PLL_TYPE1) { + /* Keep the current PCI clock if not specified */ + if (pciclock == 0) { + pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci)); + pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; + } + + /* Search for the closest MIPS clock less than or equal to a preferred value */ + for (i = 0; i < ARRAYSIZE(type1_table); i++) { + ASSERT(type1_table[i].mipsclock == + sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb)); + if (type1_table[i].mipsclock > mipsclock) + break; + } + if (i == 0) { + ret = FALSE; + goto done; + } else { + ret = TRUE; + i--; + } + ASSERT(type1_table[i].mipsclock <= mipsclock); + + /* No PLL change */ + if ((orig_n == type1_table[i].n) && + (orig_sb == type1_table[i].sb) && + (orig_pci == type1_table[i].pci33)) + goto done; + + /* Set the PLL controls */ + W_REG(clockcontrol_n, type1_table[i].n); + W_REG(clockcontrol_sb, type1_table[i].sb); + if (pciclock == 25000000) + W_REG(clockcontrol_pci, type1_table[i].pci25); + else + W_REG(clockcontrol_pci, type1_table[i].pci33); + + /* Reset */ + sb_watchdog(sbh, 1); + while (1); + } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) { + n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table; + uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table); + + ASSERT(cc); + + /* Store the current clock register values */ + orig_m2 = R_REG(&cc->clockcontrol_m2); + orig_mips = R_REG(&cc->clockcontrol_mips); + orig_ratio_parm = 0; + + /* Look up current ratio */ + for (i = 0; i < tabsz; i++) { + if ((orig_n == table[i].n) && + (orig_sb == table[i].sb) && + (orig_pci == table[i].pci33) && + (orig_m2 == table[i].m2) && + (orig_mips == table[i].m3)) { + orig_ratio_parm = table[i].ratio_parm; + break; + } + } + + /* Search for the closest MIPS clock greater or equal to a preferred value */ + for (i = 0; i < tabsz; i++) { + ASSERT(table[i].mipsclock == + sb_clock_rate(pll_type, table[i].n, table[i].m3)); + if ((mipsclock <= table[i].mipsclock) && + ((sbclock == 0) || (sbclock <= table[i].sbclock))) + break; + } + if (i == tabsz) { + ret = FALSE; + goto done; + } else { + ret = TRUE; + } + + /* No PLL change */ + if ((orig_n == table[i].n) && + (orig_sb == table[i].sb) && + (orig_pci == table[i].pci33) && + (orig_m2 == table[i].m2) && + (orig_mips == table[i].m3)) + goto done; + + /* Set the PLL controls */ + W_REG(clockcontrol_n, table[i].n); + W_REG(clockcontrol_sb, table[i].sb); + W_REG(clockcontrol_pci, table[i].pci33); + W_REG(&cc->clockcontrol_m2, table[i].m2); + W_REG(&cc->clockcontrol_mips, table[i].m3); + + /* No ratio change */ + if (orig_ratio_parm == table[i].ratio_parm) + goto end_fill; + + new_ratio = table[i].ratio_parm; + + icache_probe(&icache_size, &ic_lsize); + + /* Preload the code into the cache */ + start = ((ulong) &&start_fill) & ~(ic_lsize - 1); + end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); + while (start < end) { + cache_unroll(start, Fill_I); + start += ic_lsize; + } + + /* Copy the handler */ + start = (ulong) &handler; + end = (ulong) &afterhandler; + dst = KSEG1ADDR(0x180); + for (i = 0; i < (end - start); i += 4) + *((ulong *)(dst + i)) = *((ulong *)(start + i)); + + /* Preload handler into the cache one line at a time */ + for (i = 0; i < (end - start); i += 4) + cache_unroll(dst + i, Fill_I); + + /* Clear BEV bit */ + MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); + + /* Enable interrupts */ + MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); + + /* Enable MIPS timer interrupt */ + if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && + !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) + ASSERT(mipsr); + W_REG(&mipsr->intmask, 1); + + start_fill: + /* step 1, set clock ratios */ + MTC0(C0_BROADCOM, 3, new_ratio); + MTC0(C0_BROADCOM, 1, 8); + + /* step 2: program timer intr */ + W_REG(&mipsr->timer, 100); + (void) R_REG(&mipsr->timer); + + /* step 3, switch to async */ + sync_mode = MFC0(C0_BROADCOM, 4); + MTC0(C0_BROADCOM, 4, 1 << 22); + + /* step 4, set cfg active */ + MTC0(C0_BROADCOM, 2, 0x9); + + + /* steps 5 & 6 */ + __asm__ __volatile__ ( + ".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0" + ); + + /* step 7, clear cfg_active */ + MTC0(C0_BROADCOM, 2, 0); + + /* Additional Step: set back to orig sync mode */ + MTC0(C0_BROADCOM, 4, sync_mode); + + /* step 8, fake soft reset */ + MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4); + + end_fill: + /* step 9 set watchdog timer */ + sb_watchdog(sbh, 20); + (void) R_REG(&cc->chipid); + + /* step 11 */ + __asm__ __volatile__ ( + ".set\tmips3\n\t" + "sync\n\t" + "wait\n\t" + ".set\tmips0" + ); + while (1); + } + +done: + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + return ret; +} + + +/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ +uint32 +sb_memc_get_ncdl(void *sbh) +{ + sbmemcregs_t *memc; + uint32 ret = 0; + uint32 config, rd, wr, misc, dqsg, cd, sm, sd; + uint idx, rev; + + idx = sb_coreidx(sbh); + + memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); + if (memc == 0) + goto out; + + rev = sb_corerev(sbh); + + config = R_REG(&memc->config); + wr = R_REG(&memc->wrncdlcor); + rd = R_REG(&memc->rdncdlcor); + misc = R_REG(&memc->miscdlyctl); + dqsg = R_REG(&memc->dqsgatencdl); + + rd &= MEMC_RDNCDLCOR_RD_MASK; + wr &= MEMC_WRNCDLCOR_WR_MASK; + dqsg &= MEMC_DQSGATENCDL_G_MASK; + + if (config & MEMC_CONFIG_DDR) { + ret = (wr << 16) | (rd << 8) | dqsg; + } else { + if (rev > 0) + cd = rd; + else + cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); + sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; + sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; + ret = (sm << 16) | (sd << 8) | cd; + } + +out: + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + return ret; +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbpci.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbpci.c new file mode 100644 index 0000000000..b3469134eb --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbpci.c @@ -0,0 +1,563 @@ +/* + * Low-Level PCI and SB support for BCM47xx + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Can free sbpci_init() memory after boot */ +#ifndef linux +#define __init +#endif + +/* Emulated configuration space */ +static pci_config_regs sb_config_regs[SB_MAXCORES]; + +/* Banned cores */ +static uint16 pci_ban[32] = { 0 }; +static uint pci_banned = 0; + +/* CardBus mode */ +static bool cardbus = FALSE; + +/* Disable PCI host core */ +static bool pci_disabled = FALSE; + +/* + * Functions for accessing external PCI configuration space + */ + +/* Assume one-hot slot wiring */ +#define PCI_SLOT_MAX 16 + +static uint32 +config_cmd(void *sbh, uint bus, uint dev, uint func, uint off) +{ + uint coreidx; + sbpciregs_t *regs; + uint32 addr = 0; + + /* CardBusMode supports only one device */ + if (cardbus && dev > 1) + return 0; + + coreidx = sb_coreidx(sbh); + regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); + + /* Type 0 transaction */ + if (bus == 1) { + /* Skip unwired slots */ + if (dev < PCI_SLOT_MAX) { + /* Slide the PCI window to the appropriate slot */ + W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK)); + addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) | + (func << 8) | (off & ~3); + } + } + + /* Type 1 transaction */ + else { + W_REG(®s->sbtopci1, SBTOPCI_CFG1); + addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3); + } + + sb_setcoreidx(sbh, coreidx); + + return addr; +} + +static int +extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + uint32 addr, *reg = NULL, val; + int ret = 0; + + if (pci_disabled || + !(addr = config_cmd(sbh, bus, dev, func, off)) || + !(reg = (uint32 *) REG_MAP(addr, len)) || + BUSPROBE(val, reg)) + val = 0xffffffff; + + val >>= 8 * (off & 3); + if (len == 4) + *((uint32 *) buf) = val; + else if (len == 2) + *((uint16 *) buf) = (uint16) val; + else if (len == 1) + *((uint8 *) buf) = (uint8) val; + else + ret = -1; + + if (reg) + REG_UNMAP(reg); + + return ret; +} + +static int +extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + uint32 addr, *reg = NULL, val; + int ret = 0; + + if (pci_disabled || + !(addr = config_cmd(sbh, bus, dev, func, off)) || + !(reg = (uint32 *) REG_MAP(addr, len)) || + BUSPROBE(val, reg)) + goto done; + + if (len == 4) + val = *((uint32 *) buf); + else if (len == 2) { + val &= ~(0xffff << (8 * (off & 3))); + val |= *((uint16 *) buf) << (8 * (off & 3)); + } else if (len == 1) { + val &= ~(0xff << (8 * (off & 3))); + val |= *((uint8 *) buf) << (8 * (off & 3)); + } else + ret = -1; + + W_REG(reg, val); + + done: + if (reg) + REG_UNMAP(reg); + + return ret; +} + +/* + * Functions for accessing translated SB configuration space + */ + +static int +sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + pci_config_regs *cfg; + + if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) + return -1; + cfg = &sb_config_regs[dev]; + + ASSERT(ISALIGNED(off, len)); + ASSERT(ISALIGNED(buf, len)); + + if (len == 4) + *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); + else if (len == 2) + *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); + else if (len == 1) + *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); + else + return -1; + + return 0; +} + +static int +sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + uint coreidx, n; + void *regs; + sbconfig_t *sb; + pci_config_regs *cfg; + + if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) + return -1; + cfg = &sb_config_regs[dev]; + + ASSERT(ISALIGNED(off, len)); + ASSERT(ISALIGNED(buf, len)); + + /* Emulate BAR sizing */ + if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && + len == 4 && *((uint32 *) buf) == ~0) { + coreidx = sb_coreidx(sbh); + if ((regs = sb_setcoreidx(sbh, dev))) { + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + /* Highest numbered address match register */ + n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; + if (off == OFFSETOF(pci_config_regs, base[0])) + cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); + else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) + cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); + else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) + cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); + else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) + cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1); + } + sb_setcoreidx(sbh, coreidx); + return 0; + } + + if (len == 4) + *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); + else if (len == 2) + *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); + else if (len == 1) + *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); + else + return -1; + + return 0; +} + +int +sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + if (bus == 0) + return sb_read_config(sbh, bus, dev, func, off, buf, len); + else + return extpci_read_config(sbh, bus, dev, func, off, buf, len); +} + +int +sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + if (bus == 0) + return sb_write_config(sbh, bus, dev, func, off, buf, len); + else + return extpci_write_config(sbh, bus, dev, func, off, buf, len); +} + +void +sbpci_ban(uint16 core) +{ + if (pci_banned < ARRAYSIZE(pci_ban)) + pci_ban[pci_banned++] = core; +} +//#define CT4712_WR 1 /* Workaround for 4712 */ + +int __init +sbpci_init(void *sbh) +{ + uint chip, chiprev, chippkg, coreidx, host, i; + uint32 boardflags; + sbpciregs_t *pci; + sbconfig_t *sb; + pci_config_regs *cfg; + void *regs; + char varname[8]; + int CT4712_WR; + uint wlidx = 0; + uint16 vendor, core; + uint8 class, subclass, progif; + uint32 val; + uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; + uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; + + chip = sb_chip(sbh); + chiprev = sb_chiprev(sbh); + chippkg = sb_chippkg(sbh); + coreidx = sb_coreidx(sbh); + + if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) + return -1; + sb_core_reset(sbh, 0); + + /* In some board, */ + if(nvram_match("boardtype", "bcm94710dev")) + CT4712_WR = 0; + else + CT4712_WR = 1; + + boardflags = (uint32) getintvar(NULL, "boardflags"); + + if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) + pci_disabled = TRUE; + + /* + * The 200-pin BCM4712 package does not bond out PCI. Even when + * PCI is bonded out, some boards may leave the pins + * floating. + */ + if (((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)) || + (boardflags & BFL_NOPCI) || CT4712_WR) + pci_disabled = TRUE; + + /* + * If the PCI core should not be touched (disabled, not bonded + * out, or pins floating), do not even attempt to access core + * registers. Otherwise, try to determine if it is in host + * mode. + */ + if (pci_disabled) + host = 0; + else + host = !BUSPROBE(val, &pci->control); + + if (!host) { + /* Disable PCI interrupts in client mode */ + sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); + W_REG(&sb->sbintvec, 0); + + /* Disable the PCI bridge in client mode */ + sbpci_ban(SB_PCI); + printf("PCI: Disabled\n"); + } else { + /* Reset the external PCI bus and enable the clock */ + W_REG(&pci->control, 0x5); /* enable the tristate drivers */ + W_REG(&pci->control, 0xd); /* enable the PCI clock */ + OSL_DELAY(150); /* delay > 100 us */ + W_REG(&pci->control, 0xf); /* deassert PCI reset */ + W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ + OSL_DELAY(1); /* delay 1 us */ + + /* Enable CardBusMode */ + cardbus = nvram_match("cardbus", "1"); + if (cardbus) { + printf("PCI: Enabling CardBus\n"); + /* GPIO 1 resets the CardBus device on bcm94710ap */ + sb_gpioout(sbh, 1, 1); + sb_gpioouten(sbh, 1, 1); + W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); + } + + /* 64 MB I/O access window */ + W_REG(&pci->sbtopci0, SBTOPCI_IO); + /* 64 MB configuration access window */ + W_REG(&pci->sbtopci1, SBTOPCI_CFG0); + /* 1 GB memory access window */ + W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); + + /* Enable PCI bridge BAR0 prefetch and burst */ + val = 6; + sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val)); + + /* Enable PCI interrupts */ + W_REG(&pci->intmask, PCI_INTA); + } + + /* Scan the SB bus */ + bzero(sb_config_regs, sizeof(sb_config_regs)); + for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) { + cfg->vendor = 0xffff; + if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs))) + continue; + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + + /* Read ID register and parse vendor and core */ + val = R_REG(&sb->sbidhigh); + vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT; + core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; + progif = 0; + + /* Check if this core is banned */ + for (i = 0; i < pci_banned; i++) + if (core == pci_ban[i]) + break; + if (i < pci_banned) + continue; + + /* Known vendor translations */ + switch (vendor) { + case SB_VEND_BCM: + vendor = VENDOR_BROADCOM; + break; + } + + /* Determine class based on known core codes */ + switch (core) { + case SB_ILINE20: + class = PCI_CLASS_NET; + subclass = PCI_NET_ETHER; + core = BCM47XX_ILINE_ID; + break; + case SB_ILINE100: + class = PCI_CLASS_NET; + subclass = PCI_NET_ETHER; + core = BCM4610_ILINE_ID; + break; + case SB_ENET: + class = PCI_CLASS_NET; + subclass = PCI_NET_ETHER; + core = BCM47XX_ENET_ID; + break; + case SB_SDRAM: + case SB_MEMC: + class = PCI_CLASS_MEMORY; + subclass = PCI_MEMORY_RAM; + break; + case SB_PCI: + class = PCI_CLASS_BRIDGE; + subclass = PCI_BRIDGE_PCI; + break; + case SB_MIPS: + case SB_MIPS33: + class = PCI_CLASS_CPU; + subclass = PCI_CPU_MIPS; + break; + case SB_CODEC: + class = PCI_CLASS_COMM; + subclass = PCI_COMM_MODEM; + core = BCM47XX_V90_ID; + break; + case SB_USB: + class = PCI_CLASS_SERIAL; + subclass = PCI_SERIAL_USB; + progif = 0x10; /* OHCI */ + core = BCM47XX_USB_ID; + break; + case SB_USB11H: + class = PCI_CLASS_SERIAL; + subclass = PCI_SERIAL_USB; + progif = 0x10; /* OHCI */ + core = BCM47XX_USBH_ID; + break; + case SB_USB11D: + class = PCI_CLASS_SERIAL; + subclass = PCI_SERIAL_USB; + core = BCM47XX_USBD_ID; + break; + case SB_IPSEC: + class = PCI_CLASS_CRYPT; + subclass = PCI_CRYPT_NETWORK; + core = BCM47XX_IPSEC_ID; + break; + case SB_EXTIF: + case SB_CC: + class = PCI_CLASS_MEMORY; + subclass = PCI_MEMORY_FLASH; + break; + case SB_D11: + class = PCI_CLASS_NET; + subclass = PCI_NET_OTHER; + /* Let an nvram variable override this */ + sprintf(varname, "wl%did", wlidx); + wlidx++; + if ((core = getintvar(NULL, varname)) == 0) { + if (chip == BCM4712_DEVICE_ID) { + if (chippkg == BCM4712SMALL_PKG_ID) + core = BCM4306_D11G_ID; + else + core = BCM4306_D11DUAL_ID; + } else { + /* 4310 */ + core = BCM4310_D11B_ID; + } + } + break; + + default: + class = subclass = progif = 0xff; + break; + } + + /* Supported translations */ + cfg->vendor = htol16(vendor); + cfg->device = htol16(core); + cfg->rev_id = chiprev; + cfg->prog_if = progif; + cfg->sub_class = subclass; + cfg->base_class = class; + cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); + cfg->base[1] = htol32(sb_base(R_REG(&sb->sbadmatch1))); + cfg->base[2] = htol32(sb_base(R_REG(&sb->sbadmatch2))); + cfg->base[3] = htol32(sb_base(R_REG(&sb->sbadmatch3))); + cfg->base[4] = 0; + cfg->base[5] = 0; + if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) + cfg->header_type = PCI_HEADER_BRIDGE; + else + cfg->header_type = PCI_HEADER_NORMAL; + /* Save core interrupt flag */ + cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK; + /* Default to MIPS shared interrupt 0 */ + cfg->int_line = 0; + /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */ + if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || + (regs = sb_setcore(sbh, SB_MIPS33, 0))) { + sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + val = R_REG(&sb->sbipsflag); + for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) { + if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin) + break; + } + if (cfg->int_line > 4) + cfg->int_line = 0; + } + /* Emulated core */ + *((uint32 *) &cfg->sprom_control) = 0xffffffff; + } + + sb_setcoreidx(sbh, coreidx); + return 0; +} + +void +sbpci_check(void *sbh) +{ + uint coreidx; + sbpciregs_t *pci; + uint32 sbtopci1; + uint32 buf[64], *ptr, i; + ulong pa; + volatile uint j; + + coreidx = sb_coreidx(sbh); + pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); + + /* Clear the test array */ + pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL); + ptr = (uint32 *) OSL_UNCACHED(&buf[0]); + memset(ptr, 0, sizeof(buf)); + + /* Point PCI window 1 to memory */ + sbtopci1 = R_REG(&pci->sbtopci1); + W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK)); + + /* Fill the test array via PCI window 1 */ + ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf)); + for (i = 0; i < ARRAYSIZE(buf); i++) { + for (j = 0; j < 2; j++); + W_REG(&ptr[i], i); + } + REG_UNMAP(ptr); + + /* Restore PCI window 1 */ + W_REG(&pci->sbtopci1, sbtopci1); + + /* Check the test array */ + DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL); + ptr = (uint32 *) OSL_UNCACHED(&buf[0]); + for (i = 0; i < ARRAYSIZE(buf); i++) { + if (ptr[i] != i) + break; + } + + /* Change the clock if the test fails */ + if (i < ARRAYSIZE(buf)) { + uint32 req, cur; + + cur = sb_clock(sbh); + printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000); + for (req = 104000000; req < 176000000; req += 4000000) { + printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000); + /* This will only reset if the clocks are valid and have changed */ + sb_mips_setclock(sbh, req, 0, 0); + } + /* Should not reach here */ + ASSERT(0); + } + + sb_setcoreidx(sbh, coreidx); +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/setup.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/setup.c new file mode 100644 index 0000000000..e1b0050a45 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/setup.c @@ -0,0 +1,251 @@ +/* + * Generic setup routines for Broadcom MIPS boards + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTD_PARTITIONS +#include +#include +#endif + +#include +#include +#include +#include +#include +#include + +extern void bcm947xx_time_init(void); +extern void bcm947xx_timer_setup(struct irqaction *irq); + +#ifdef CONFIG_REMOTE_DEBUG +extern void set_debug_traps(void); +extern void rs_kgdb_hook(struct serial_state *); +extern void breakpoint(void); +#endif + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) +extern struct ide_ops std_ide_ops; +#endif + +/* Global SB handle */ +void *bcm947xx_sbh = NULL; +spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED; +EXPORT_SYMBOL(bcm947xx_sbh); +EXPORT_SYMBOL(bcm947xx_sbh_lock); + +/* Convenience */ +#define sbh bcm947xx_sbh +#define sbh_lock bcm947xx_sbh_lock + +/* Kernel command line */ +char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE; + +void +bcm947xx_machine_restart(char *command) +{ + printk("Please stand by while rebooting the system...\n"); + + /* Set the watchdog timer to reset immediately */ + __cli(); + sb_watchdog(sbh, 1); + while (1); +} + +void +bcm947xx_machine_halt(void) +{ + printk("System halted\n"); + + /* Disable interrupts and watchdog and spin forever */ + __cli(); + sb_watchdog(sbh, 0); + while (1); +} + +#ifdef CONFIG_SERIAL + +static struct serial_struct rs = { + line: 0, + flags: ASYNC_BOOT_AUTOCONF, + io_type: SERIAL_IO_MEM, +}; + +static void __init +serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) +{ + rs.iomem_base = regs; + rs.irq = irq + 2; + rs.baud_base = baud_base / 16; + rs.iomem_reg_shift = reg_shift; + + early_serial_setup(&rs); + + rs.line++; +} + +static void __init +serial_setup(void *sbh) +{ + sb_serial_init(sbh, serial_add); + +#ifdef CONFIG_REMOTE_DEBUG + /* Use the last port for kernel debugging */ + if (rs.iomem_base) + rs_kgdb_hook(&rs); +#endif +} + +#endif /* CONFIG_SERIAL */ + +void __init +brcm_setup(void) +{ + char *value; + + /* Get global SB handle */ + sbh = sb_kattach(); + + /* Initialize clocks and interrupts */ + sb_mips_init(sbh); + +#ifdef CONFIG_SERIAL + /* Initialize UARTs */ + serial_setup(sbh); +#endif + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) + ide_ops = &std_ide_ops; +#endif + + /* Override default command line arguments */ + value = nvram_get("kernel_args"); + if (value && strlen(value) && strncmp(value, "empty", 5)) + strncpy(arcs_cmdline, value, sizeof(arcs_cmdline)); + + + /* Generic setup */ + _machine_restart = bcm947xx_machine_restart; + _machine_halt = bcm947xx_machine_halt; + _machine_power_off = bcm947xx_machine_halt; + + board_time_init = bcm947xx_time_init; + board_timer_setup = bcm947xx_timer_setup; +} + +const char * +get_system_type(void) +{ + return "Broadcom BCM947XX"; +} + +void __init +bus_error_init(void) +{ +} + +#ifdef CONFIG_MTD_PARTITIONS + +static struct mtd_partition bcm947xx_parts[] = { + { name: "pmon", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, }, + { name: "linux", offset: 0, size: 0, }, + { name: "rootfs", offset: 0, size: 0, }, + { name: "nvram", offset: 0, size: 0, }, + { name: "OpenWrt", offset: 0, size: 0, }, + { name: NULL, }, +}; + +static int __init +find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part) +{ + struct trx_header *trx; + unsigned char buf[512]; + int off; + size_t len; + + trx = (struct trx_header *) buf; + + for (off = (256*1024); off < size; off += mtd->erasesize) { + memset(buf, 0xe5, sizeof(buf)); + + /* + * Read into buffer + */ + if (MTD_READ(mtd, off, sizeof(buf), &len, buf) || + len != sizeof(buf)) + continue; + + /* found a TRX header */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + part->offset = le32_to_cpu(trx->offsets[1]); + part->size = le32_to_cpu(trx->len); + + part->size -= part->offset; + part->offset += off; + + goto done; + } + } + + printk(KERN_NOTICE + "%s: Couldn't find root filesystem\n", + mtd->name); + return -1; + + done: + return part->size; +} + +struct mtd_partition * __init +init_mtd_partitions(struct mtd_info *mtd, size_t size) +{ + + /* boot loader */ + bcm947xx_parts[0].offset=0; + bcm947xx_parts[0].size=256*1024; + + /* nvram */ + bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize); + bcm947xx_parts[3].size = size - bcm947xx_parts[3].offset; + + /* Size linux (kernel and rootfs) */ + bcm947xx_parts[1].offset = bcm947xx_parts[0].size; + bcm947xx_parts[1].size = bcm947xx_parts[3].offset - bcm947xx_parts[1].offset; + + /* Find and size rootfs */ + if (find_root(mtd,size,&bcm947xx_parts[2])==0) { + /* entirely jffs2 */ + bcm947xx_parts[2].size = bcm947xx_parts[3].offset - bcm947xx_parts[2].offset; + bcm947xx_parts[4].name = NULL; + } else { + /* legacy setup */ + /* calculate leftover flash, and assign it to the jffs2 partition */ + bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + bcm947xx_parts[2].size; + bcm947xx_parts[4].offset = ROUNDUP(bcm947xx_parts[4].offset, mtd->erasesize); + bcm947xx_parts[4].size = bcm947xx_parts[3].offset - bcm947xx_parts[4].offset; + } + + return bcm947xx_parts; +} + +EXPORT_SYMBOL(init_mtd_partitions); + +#endif diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sflash.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sflash.c new file mode 100644 index 0000000000..4f69880cac --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sflash.c @@ -0,0 +1,346 @@ +/* + * Broadcom SiliconBackplane chipcommon serial flash interface + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include + +/* Private global state */ +static struct sflash sflash; + +/* Issue a serial flash command */ +static INLINE void +sflash_cmd(chipcregs_t *cc, uint opcode) +{ + W_REG(&cc->flashcontrol, SFLASH_START | opcode); + while (R_REG(&cc->flashcontrol) & SFLASH_BUSY); +} + +/* Initialize serial flash access */ +struct sflash * +sflash_init(chipcregs_t *cc) +{ + uint32 id, id2; + + bzero(&sflash, sizeof(sflash)); + + sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK; + + switch (sflash.type) { + case SFLASH_ST: + /* Probe for ST chips */ + sflash_cmd(cc, SFLASH_ST_DP); + sflash_cmd(cc, SFLASH_ST_RES); + id = R_REG(&cc->flashdata); + switch (id) { + case 0x11: + /* ST M25P20 2 Mbit Serial Flash */ + sflash.blocksize = 64 * 1024; + sflash.numblocks = 4; + break; + case 0x12: + /* ST M25P40 4 Mbit Serial Flash */ + sflash.blocksize = 64 * 1024; + sflash.numblocks = 8; + break; + case 0x13: + /* ST M25P80 8 Mbit Serial Flash */ + sflash.blocksize = 64 * 1024; + sflash.numblocks = 16; + break; + case 0x14: + /* ST M25P16 16 Mbit Serial Flash */ + sflash.blocksize = 64 * 1024; + sflash.numblocks = 32; + break; + case 0xbf: + W_REG(&cc->flashaddress, 1); + sflash_cmd(cc, SFLASH_ST_RES); + id2 = R_REG(&cc->flashdata); + if (id2 == 0x44) { + /* SST M25VF80 4 Mbit Serial Flash */ + sflash.blocksize = 64 * 1024; + sflash.numblocks = 8; + } + break; + } + break; + + case SFLASH_AT: + /* Probe for Atmel chips */ + sflash_cmd(cc, SFLASH_AT_STATUS); + id = R_REG(&cc->flashdata) & 0x3c; + switch (id) { + case 0x2c: + /* Atmel AT45DB161 16Mbit Serial Flash */ + sflash.blocksize = 512; + sflash.numblocks = 4096; + break; + case 0x34: + /* Atmel AT45DB321 32Mbit Serial Flash */ + sflash.blocksize = 512; + sflash.numblocks = 8192; + break; + case 0x3c: + /* Atmel AT45DB642 64Mbit Serial Flash */ + sflash.blocksize = 1024; + sflash.numblocks = 8192; + break; + } + break; + } + + sflash.size = sflash.blocksize * sflash.numblocks; + return sflash.size ? &sflash : NULL; +} + +/* Read len bytes starting at offset into buf. Returns number of bytes read. */ +int +sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) +{ + int cnt; + uint32 *from, *to; + + if (!len) + return 0; + + if ((offset + len) > sflash.size) + return -22; + + if ((len >= 4) && (offset & 3)) + cnt = 4 - (offset & 3); + else if ((len >= 4) && ((uint32)buf & 3)) + cnt = 4 - ((uint32)buf & 3); + else + cnt = len; + + from = (uint32 *)(CC_FLASH_BASE + offset); + to = (uint32 *)buf; + + if (cnt < 4) { + bcopy(from, to, cnt); + return cnt; + } + + while (cnt >= 4) { + *to++ = *from++; + cnt -= 4; + } + + return (len - cnt); +} + +/* Poll for command completion. Returns zero when complete. */ +int +sflash_poll(chipcregs_t *cc, uint offset) +{ + if (offset >= sflash.size) + return -22; + + switch (sflash.type) { + case SFLASH_ST: + /* Check for ST Write In Progress bit */ + sflash_cmd(cc, SFLASH_ST_RDSR); + return R_REG(&cc->flashdata) & SFLASH_ST_WIP; + case SFLASH_AT: + /* Check for Atmel Ready bit */ + sflash_cmd(cc, SFLASH_AT_STATUS); + return !(R_REG(&cc->flashdata) & SFLASH_AT_READY); + } + + return 0; +} + +/* Write len bytes starting at offset into buf. Returns number of bytes + * written. Caller should poll for completion. + */ +int +sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) +{ + struct sflash *sfl; + int ret = 0; + uint32 page, byte, mask; + + if (!len) + return 0; + + if ((offset + len) > sflash.size) + return -22; + + sfl = &sflash; + switch (sfl->type) { + case SFLASH_ST: + ret = 1; + /* Enable writes */ + sflash_cmd(cc, SFLASH_ST_WREN); + W_REG(&cc->flashaddress, offset); + W_REG(&cc->flashdata, *buf); + /* Page program */ + sflash_cmd(cc, SFLASH_ST_PP); + break; + case SFLASH_AT: + mask = sfl->blocksize - 1; + page = (offset & ~mask) << 1; + byte = offset & mask; + /* Read main memory page into buffer 1 */ + if (byte || len < sfl->blocksize) { + W_REG(&cc->flashaddress, page); + sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); + /* 250 us for AT45DB321B */ + SPINWAIT(sflash_poll(cc, offset), 1000); + ASSERT(!sflash_poll(cc, offset)); + } + /* Write into buffer 1 */ + for (ret = 0; ret < len && byte < sfl->blocksize; ret++) { + W_REG(&cc->flashaddress, byte++); + W_REG(&cc->flashdata, *buf++); + sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); + } + /* Write buffer 1 into main memory page */ + W_REG(&cc->flashaddress, page); + sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); + break; + } + + return ret; +} + +/* Erase a region. Returns number of bytes scheduled for erasure. + * Caller should poll for completion. + */ +int +sflash_erase(chipcregs_t *cc, uint offset) +{ + struct sflash *sfl; + + if (offset >= sflash.size) + return -22; + + sfl = &sflash; + switch (sfl->type) { + case SFLASH_ST: + sflash_cmd(cc, SFLASH_ST_WREN); + W_REG(&cc->flashaddress, offset); + sflash_cmd(cc, SFLASH_ST_SE); + return sfl->blocksize; + case SFLASH_AT: + W_REG(&cc->flashaddress, offset << 1); + sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); + return sfl->blocksize; + } + + return 0; +} + +/* + * writes the appropriate range of flash, a NULL buf simply erases + * the region of flash + */ +int +sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) +{ + struct sflash *sfl; + uchar *block = NULL, *cur_ptr, *blk_ptr; + uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; + uint blk_offset, blk_len, copied; + int bytes, ret = 0; + + /* Check address range */ + if (len <= 0) + return 0; + + sfl = &sflash; + if ((offset + len) > sfl->size) + return -1; + + blocksize = sfl->blocksize; + mask = blocksize - 1; + + /* Allocate a block of mem */ + if (!(block = MALLOC(blocksize))) + return -1; + + while (len) { + /* Align offset */ + cur_offset = offset & ~mask; + cur_length = blocksize; + cur_ptr = block; + + remainder = blocksize - (offset & mask); + if (len < remainder) + cur_retlen = len; + else + cur_retlen = remainder; + + /* buf == NULL means erase only */ + if (buf) { + /* Copy existing data into holding block if necessary */ + if ((offset & mask) || (len < blocksize)) { + blk_offset = cur_offset; + blk_len = cur_length; + blk_ptr = cur_ptr; + + /* Copy entire block */ + while(blk_len) { + copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); + blk_offset += copied; + blk_len -= copied; + blk_ptr += copied; + } + } + + /* Copy input data into holding block */ + memcpy(cur_ptr + (offset & mask), buf, cur_retlen); + } + + /* Erase block */ + if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) + goto done; + while (sflash_poll(cc, (uint) cur_offset)); + + /* buf == NULL means erase only */ + if (!buf) { + offset += cur_retlen; + len -= cur_retlen; + continue; + } + + /* Write holding block */ + while (cur_length > 0) { + if ((bytes = sflash_write(cc, + (uint) cur_offset, + (uint) cur_length, + (uchar *) cur_ptr)) < 0) { + ret = bytes; + goto done; + } + while (sflash_poll(cc, (uint) cur_offset)); + cur_offset += bytes; + cur_length -= bytes; + cur_ptr += bytes; + } + + offset += cur_retlen; + len -= cur_retlen; + buf += cur_retlen; + } + +done: + if (block) + MFREE(block, blocksize); + return ret; +} + diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c new file mode 100644 index 0000000000..9b7574663d --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c @@ -0,0 +1,117 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* Global SB handle */ +extern void *bcm947xx_sbh; +extern spinlock_t bcm947xx_sbh_lock; + +/* Convenience */ +#define sbh bcm947xx_sbh +#define sbh_lock bcm947xx_sbh_lock + +extern int panic_timeout; +static int watchdog = 0; +static u8 *mcr = NULL; + +void __init +bcm947xx_time_init(void) +{ + unsigned int hz; + extifregs_t *eir; + + /* + * Use deterministic values for initial counter interrupt + * so that calibrate delay avoids encountering a counter wrap. + */ + write_c0_count(0); + write_c0_compare(0xffff); + + if (!(hz = sb_mips_clock(sbh))) + hz = 100000000; + + printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh), + (hz + 500000) / 1000000); + + /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ + mips_hpt_frequency = hz / 2; + + /* Set watchdog interval in ms */ + watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0); + + /* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */ + if (watchdog > 0) { + if (watchdog < 3000) + watchdog = 3000; + } + + + /* Set panic timeout in seconds */ + panic_timeout = watchdog / 1000; + + /* Setup blink */ + if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { + sbconfig_t *sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF); + unsigned long base = EXTIF_CFGIF_BASE(sb_base(readl(&sb->sbadmatch1))); + mcr = (u8 *) ioremap_nocache(base + UART_MCR, 1); + } +} + +static void +bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Generic MIPS timer code */ + timer_interrupt(irq, dev_id, regs); + + /* Set the watchdog timer to reset after the specified number of ms */ + if (watchdog > 0) + sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog); + +#ifdef CONFIG_HWSIM + (*((int *)0xa0000f1c))++; +#else + /* Blink one of the LEDs in the external UART */ + if (mcr && !(jiffies % (HZ/2))) + writeb(readb(mcr) ^ UART_MCR_OUT2, mcr); +#endif +} + +static struct irqaction bcm947xx_timer_irqaction = { + bcm947xx_timer_interrupt, + SA_INTERRUPT, + 0, + "timer", + NULL, + NULL +}; + +void __init +bcm947xx_timer_setup(struct irqaction *irq) +{ + /* Enable the timer interrupt */ + setup_irq(7, &bcm947xx_timer_irqaction); +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/generic/Makefile b/package/linux/kernel-source/arch/mips/brcm-boards/generic/Makefile new file mode 100644 index 0000000000..e16a80e56b --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/generic/Makefile @@ -0,0 +1,26 @@ +# +# Makefile for generic Broadcom MIPS boards +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +.S.s: + $(CPP) $(AFLAGS) $< -o $*.s +.S.o: + $(CC) $(AFLAGS) -c $< -o $*.o + +O_TARGET := brcm.o + +obj-y := int-handler.o irq.o + +obj-$(CONFIG_REMOTE_DEBUG) += gdb_hook.o + +include $(TOPDIR)/Rules.make diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c b/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c new file mode 100644 index 0000000000..1345289bbc --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c @@ -0,0 +1,120 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * This is the interface to the remote debugger stub. + * + */ + +#include +#include + +#include +#include + +static struct async_struct kdb_port_info = {0}; + +static __inline__ unsigned int serial_in(struct async_struct *info, int offset) +{ + return readb((unsigned long) info->iomem_base + + (offset<iomem_reg_shift)); +} + +static __inline__ void serial_out(struct async_struct *info, int offset, + int value) +{ + writeb(value, (unsigned long) info->iomem_base + + (offset<iomem_reg_shift)); +} + +void rs_kgdb_hook(struct serial_state *ser) { + int t; + + kdb_port_info.state = ser; + kdb_port_info.magic = SERIAL_MAGIC; + kdb_port_info.port = ser->port; + kdb_port_info.flags = ser->flags; + kdb_port_info.iomem_base = ser->iomem_base; + kdb_port_info.iomem_reg_shift = ser->iomem_reg_shift; + kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; + + /* + * Clear all interrupts + */ + serial_in(&kdb_port_info, UART_LSR); + serial_in(&kdb_port_info, UART_RX); + serial_in(&kdb_port_info, UART_IIR); + serial_in(&kdb_port_info, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ + serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); + + /* + * and set the speed of the serial port + * (currently hardwired to 115200 8N1 + */ + + /* baud rate is fixed to 115200 (is this sufficient?)*/ + t = kdb_port_info.state->baud_base / 115200; + /* set DLAB */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); + serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ + serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ + /* reset DLAB */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); +} + +int putDebugChar(char c) +{ + + if (!kdb_port_info.state) { /* need to init device first */ + return 0; + } + + while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(&kdb_port_info, UART_TX, c); + + return 1; +} + +char getDebugChar(void) +{ + if (!kdb_port_info.state) { /* need to init device first */ + return 0; + } + + while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) + ; + + return(serial_in(&kdb_port_info, UART_RX)); +} diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/generic/int-handler.S b/package/linux/kernel-source/arch/mips/brcm-boards/generic/int-handler.S new file mode 100644 index 0000000000..de8f115c29 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/generic/int-handler.S @@ -0,0 +1,51 @@ +/* + * Generic interrupt handler for Broadcom MIPS boards + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include + +#include +#include +#include +#include + +/* + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware + * 4 Hardware + * 5 Hardware + * 6 Hardware + * 7 R4k timer + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(brcmIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + .set noreorder + + jal brcm_irq_dispatch + move a0, sp + + j ret_from_irq + nop + + END(brcmIRQ) diff --git a/package/linux/kernel-source/arch/mips/brcm-boards/generic/irq.c b/package/linux/kernel-source/arch/mips/brcm-boards/generic/irq.c new file mode 100644 index 0000000000..157c6b3803 --- /dev/null +++ b/package/linux/kernel-source/arch/mips/brcm-boards/generic/irq.c @@ -0,0 +1,130 @@ +/* + * Generic interrupt control functions for Broadcom MIPS boards + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) + +extern asmlinkage void brcmIRQ(void); +extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs); + +void +brcm_irq_dispatch(struct pt_regs *regs) +{ + u32 cause; + + cause = read_c0_cause() & + read_c0_status() & + CAUSEF_IP; + +#ifdef CONFIG_KERNPROF + change_c0_status(cause | 1, 1); +#else + clear_c0_status(cause); +#endif + + if (cause & CAUSEF_IP7) + do_IRQ(7, regs); + if (cause & CAUSEF_IP2) + do_IRQ(2, regs); + if (cause & CAUSEF_IP3) + do_IRQ(3, regs); + if (cause & CAUSEF_IP4) + do_IRQ(4, regs); + if (cause & CAUSEF_IP5) + do_IRQ(5, regs); + if (cause & CAUSEF_IP6) + do_IRQ(6, regs); +} + +static void +enable_brcm_irq(unsigned int irq) +{ + if (irq < 8) + set_c0_status(1 << (irq + 8)); + else + set_c0_status(IE_IRQ0); +} + +static void +disable_brcm_irq(unsigned int irq) +{ + if (irq < 8) + clear_c0_status(1 << (irq + 8)); + else + clear_c0_status(IE_IRQ0); +} + +static void +ack_brcm_irq(unsigned int irq) +{ + /* Already done in brcm_irq_dispatch */ +} + +static unsigned int +startup_brcm_irq(unsigned int irq) +{ + enable_brcm_irq(irq); + + return 0; /* never anything pending */ +} + +static void +end_brcm_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_brcm_irq(irq); +} + +static struct hw_interrupt_type brcm_irq_type = { + typename: "MIPS", + startup: startup_brcm_irq, + shutdown: disable_brcm_irq, + enable: enable_brcm_irq, + disable: disable_brcm_irq, + ack: ack_brcm_irq, + end: end_brcm_irq, + NULL +}; + +void __init +init_IRQ(void) +{ + int i; + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + irq_desc[i].handler = &brcm_irq_type; + } + + set_except_vector(0, brcmIRQ); + change_c0_status(ST0_IM, ALLINTS); + +#ifdef CONFIG_REMOTE_DEBUG + printk("Breaking into debugger...\n"); + set_debug_traps(); + breakpoint(); +#endif +} diff --git a/package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c b/package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c new file mode 100644 index 0000000000..5087477bbf --- /dev/null +++ b/package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c @@ -0,0 +1,855 @@ +/* + * Common Flash Interface support: + * SST Standard Vendor Command Set (ID 0x0701) + * + * Copyright (C) 2000 Crossnet Co. + * + * 2_by_8 routines added by Simon Munton + * + * This code is GPL + * + * $Id$ + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static int cfi_sststd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_sststd_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int cfi_sststd_erase_onesize(struct mtd_info *, struct erase_info *); +static int cfi_sststd_erase_varsize(struct mtd_info *, struct erase_info *); +static void cfi_sststd_sync (struct mtd_info *); +static int cfi_sststd_suspend (struct mtd_info *); +static void cfi_sststd_resume (struct mtd_info *); + +static void cfi_sststd_destroy(struct mtd_info *); + +struct mtd_info *cfi_cmdset_0701(struct map_info *, int); +static struct mtd_info *cfi_sststd_setup (struct map_info *); + + +static struct mtd_chip_driver cfi_sststd_chipdrv = { + probe: NULL, /* Not usable directly */ + destroy: cfi_sststd_destroy, + name: "cfi_cmdset_0701", + module: THIS_MODULE +}; + +struct mtd_info *cfi_cmdset_0701(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ofs_factor = cfi->interleave * cfi->device_type; + int i; + __u8 major, minor; + __u32 base = cfi->chips[0].start; + + if (cfi->cfi_mode==1){ + __u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; + + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); + + major = cfi_read_query(map, base + (adr+3)*ofs_factor); + minor = cfi_read_query(map, base + (adr+4)*ofs_factor); + + printk(" SST Query Table v%c.%c at 0x%4.4X\n", + major, minor, adr); + cfi_send_gen_cmd(0xf0, 0x5555, base, map, cfi, cfi->device_type, NULL); + + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x90, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi->mfr = cfi_read_query(map, base); + cfi->id = cfi_read_query(map, base + ofs_factor); + + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); + + switch (cfi->device_type) { + case CFI_DEVICETYPE_X16: + cfi->addr_unlock1 = 0x5555; + cfi->addr_unlock2 = 0x2AAA; + break; + default: + printk(KERN_NOTICE "Eep. Unknown cfi_cmdset_0701 device type %d\n", cfi->device_type); + return NULL; + } + } /* CFI mode */ + + for (i=0; i< cfi->numchips; i++) { + cfi->chips[i].word_write_time = 1<cfiq->WordWriteTimeoutTyp; + cfi->chips[i].buffer_write_time = 1<cfiq->BufWriteTimeoutTyp; + cfi->chips[i].erase_time = 1<cfiq->BlockEraseTimeoutTyp; + } + + map->fldrv = &cfi_sststd_chipdrv; + MOD_INC_USE_COUNT; + + cfi_send_gen_cmd(0xf0, 0x5555, base, map, cfi, cfi->device_type, NULL); + return cfi_sststd_setup(map); +} + +static struct mtd_info *cfi_sststd_setup(struct map_info *map) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct mtd_info *mtd; + unsigned long devsize = (1<cfiq->DevSize) * cfi->interleave; + + mtd = kmalloc(sizeof(*mtd), GFP_KERNEL); + printk("number of %s chips: %d\n", (cfi->cfi_mode)?"JEDEC":"CFI",cfi->numchips); + + if (!mtd) { + printk("Failed to allocate memory for MTD device\n"); + kfree(cfi->cmdset_priv); + return NULL; + } + + memset(mtd, 0, sizeof(*mtd)); + mtd->priv = map; + mtd->type = MTD_NORFLASH; + /* Also select the correct geometry setup too */ + mtd->size = devsize * cfi->numchips; + + if (cfi->cfiq->NumEraseRegions == 1) { + /* No need to muck about with multiple erase sizes */ + mtd->erasesize = ((cfi->cfiq->EraseRegionInfo[0] >> 8) & ~0xff) * cfi->interleave; + } else { + unsigned long offset = 0; + int i,j; + + mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; + mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) * mtd->numeraseregions, GFP_KERNEL); + if (!mtd->eraseregions) { + printk("Failed to allocate memory for MTD erase region info\n"); + kfree(cfi->cmdset_priv); + return NULL; + } + + for (i=0; icfiq->NumEraseRegions; i++) { + unsigned long ernum, ersize; + ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave; + ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1; + + if (mtd->erasesize < ersize) { + mtd->erasesize = ersize; + } + for (j=0; jnumchips; j++) { + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum; + } + offset += (ersize * ernum); + } + + // debug + for (i=0; inumeraseregions;i++){ + printk("%d: offset=0x%x,size=0x%x,blocks=%d\n", + i,mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + } + } + + switch (CFIDEV_BUSWIDTH) + { + case 1: + case 2: + case 4: + if (mtd->numeraseregions > 1) + mtd->erase = cfi_sststd_erase_varsize; + else + mtd->erase = cfi_sststd_erase_onesize; + mtd->read = cfi_sststd_read; + mtd->write = cfi_sststd_write; + break; + + default: + printk("Unsupported buswidth\n"); + kfree(mtd); + kfree(cfi->cmdset_priv); + return NULL; + break; + } + mtd->sync = cfi_sststd_sync; + mtd->suspend = cfi_sststd_suspend; + mtd->resume = cfi_sststd_resume; + mtd->flags = MTD_CAP_NORFLASH; + map->fldrv = &cfi_sststd_chipdrv; + mtd->name = map->name; + MOD_INC_USE_COUNT; + return mtd; +} + +static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long timeo = jiffies + HZ; + + retry: + cfi_spin_lock(chip->mutex); + + if (chip->state != FL_READY){ + printk("Waiting for chip to read, status = %d\n", chip->state); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + + goto retry; + } + + adr += chip->start; + + chip->state = FL_READY; + + map->copy_from(map, buf, adr, len); + + wake_up(&chip->wq); + cfi_spin_unlock(chip->mutex); + + return 0; +} + +static int cfi_sststd_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + + *retlen = 0; + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<chipshift) - ofs; + else + thislen = len; + + ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, __u32 datum, int fast) +{ + unsigned long timeo = jiffies + HZ; + unsigned int Last[4]; + unsigned long Count = 0; + struct cfi_private *cfi = map->fldrv_priv; + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + retry: + cfi_spin_lock(chip->mutex); + + if (chip->state != FL_READY){ + printk("Waiting for chip to write, status = %d\n", chip->state); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + printk("Wake up to write:\n"); + timeo = jiffies + HZ; + + goto retry; + } + + chip->state = FL_WRITING; + + adr += chip->start; + ENABLE_VPP(map); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + + cfi_write(map, datum, adr); + + cfi_spin_unlock(chip->mutex); + cfi_udelay(chip->word_write_time); + cfi_spin_lock(chip->mutex); + + Last[0] = cfi_read(map, adr); + // printk("Last[0] is %x\n", Last[0]); + Last[1] = cfi_read(map, adr); + // printk("Last[1] is %x\n", Last[1]); + Last[2] = cfi_read(map, adr); + // printk("Last[2] is %x\n", Last[2]); + + for (Count = 3; Last[(Count - 1) % 4] != Last[(Count - 2) % 4] && Count < 10000; Count++){ + cfi_spin_unlock(chip->mutex); + cfi_udelay(10); + cfi_spin_lock(chip->mutex); + + Last[Count % 4] = cfi_read(map, adr); + // printk("Last[%d%%4] is %x\n", Count, Last[Count%4]); + } + + if (Last[(Count - 1) % 4] != datum){ + printk("Last[%ld] is %x, datum is %x\n",(Count - 1) % 4,Last[(Count - 1) % 4],datum); + cfi_send_gen_cmd(0xF0, 0, chip->start, map, cfi, cfi->device_type, NULL); + DISABLE_VPP(map); + ret = -EIO; + } + DISABLE_VPP(map); + chip->state = FL_READY; + wake_up(&chip->wq); + cfi_spin_unlock(chip->mutex); + + return ret; +} + +static int cfi_sststd_write (struct mtd_info *mtd, loff_t to , size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int ret = 0; + int chipnum; + unsigned long ofs, chipstart; + + *retlen = 0; + if (!len) + return 0; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + chipstart = cfi->chips[chipnum].start; + + /* If it's not bus-aligned, do the first byte write */ + if (ofs & (CFIDEV_BUSWIDTH-1)) { + unsigned long bus_ofs = ofs & ~(CFIDEV_BUSWIDTH-1); + int i = ofs - bus_ofs; + int n = 0; + u_char tmp_buf[4]; + __u32 datum; + + map->copy_from(map, tmp_buf, bus_ofs + cfi->chips[chipnum].start, CFIDEV_BUSWIDTH); + while (len && i < CFIDEV_BUSWIDTH) + tmp_buf[i++] = buf[n++], len--; + + if (cfi_buswidth_is_2()) { + datum = *(__u16*)tmp_buf; + } else if (cfi_buswidth_is_4()) { + datum = *(__u32*)tmp_buf; + } else { + return -EINVAL; /* should never happen, but be safe */ + } + + ret = do_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, datum, 0); + if (ret) + return ret; + + ofs += n; + buf += n; + (*retlen) += n; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* We are now aligned, write as much as possible */ + while(len >= CFIDEV_BUSWIDTH) { + __u32 datum; + + if (cfi_buswidth_is_1()) { + datum = *(__u8*)buf; + } else if (cfi_buswidth_is_2()) { + datum = *(__u16*)buf; + } else if (cfi_buswidth_is_4()) { + datum = *(__u32*)buf; + } else { + return -EINVAL; + } + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, cfi->fast_prog); + if (ret) { + return ret; + } + + ofs += CFIDEV_BUSWIDTH; + buf += CFIDEV_BUSWIDTH; + (*retlen) += CFIDEV_BUSWIDTH; + len -= CFIDEV_BUSWIDTH; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + chipstart = cfi->chips[chipnum].start; + } + } + + if (len & (CFIDEV_BUSWIDTH-1)) { + int i = 0, n = 0; + u_char tmp_buf[4]; + __u32 datum; + + map->copy_from(map, tmp_buf, ofs + cfi->chips[chipnum].start, CFIDEV_BUSWIDTH); + while (len--) + tmp_buf[i++] = buf[n++]; + + if (cfi_buswidth_is_2()) { + datum = *(__u16*)tmp_buf; + } else if (cfi_buswidth_is_4()) { + datum = *(__u32*)tmp_buf; + } else { + return -EINVAL; /* should never happen, but be safe */ + } + + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, 0); + if (ret) + return ret; + + (*retlen) += n; + } + + return 0; +} + +static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + unsigned int status; + unsigned long timeo = jiffies + HZ; + struct cfi_private *cfi = map->fldrv_priv; + unsigned int rdy_mask; + DECLARE_WAITQUEUE(wait, current); + + retry: + cfi_spin_lock(chip->mutex); + + if (chip->state != FL_READY){ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + + goto retry; + } + + chip->state = FL_ERASING; + + adr += chip->start; + ENABLE_VPP(map); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_write(map, CMD(0x30), adr); + + timeo = jiffies + (HZ*20); + + cfi_spin_unlock(chip->mutex); + schedule_timeout(HZ); + cfi_spin_lock(chip->mutex); + + rdy_mask = CMD(0x80); + + /* Once the state machine's known to be working I'll do that */ + + while ( ( (status = cfi_read(map,adr)) & rdy_mask ) != rdy_mask ) { + static int z=0; + + if (chip->state != FL_ERASING) { + /* Someone's suspended the erase. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + printk("erase suspended. Sleeping\n"); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ*2); + cfi_spin_lock(chip->mutex); + continue; + } + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + chip->state = FL_READY; + cfi_spin_unlock(chip->mutex); + printk("waiting for erase to complete timed out."); + DISABLE_VPP(map); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + cfi_spin_unlock(chip->mutex); + + z++; + if ( 0 && !(z % 100 )) + printk("chip not ready yet after erase. looping\n"); + + cfi_udelay(1); + + cfi_spin_lock(chip->mutex); + continue; + } + + /* Done and happy. */ + DISABLE_VPP(map); + chip->state = FL_READY; + wake_up(&chip->wq); + cfi_spin_unlock(chip->mutex); + return 0; +} + +static int cfi_sststd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr, len; + int chipnum, ret = 0; + int i, first; + struct mtd_erase_region_info *regions = mtd->eraseregions; + + if (instr->addr > mtd->size) + return -EINVAL; + + if ((instr->len + instr->addr) > mtd->size) + return -EINVAL; + + /* Check that both start and end of the requested erase are + * aligned with the erasesize at the appropriate addresses. + */ + + i = 0; + + /* Skip all erase regions which are ended before the start of + the requested erase. Actually, to save on the calculations, + we skip to the first erase region which starts after the + start of the requested erase, and then go back one. + */ + + while (i < mtd->numeraseregions && instr->addr >= regions[i].offset) + i++; + i--; + + /* OK, now i is pointing at the erase region in which this + erase request starts. Check the start of the requested + erase range is aligned with the erase size which is in + effect here. + */ + + if (instr->addr & (regions[i].erasesize-1)) + return -EINVAL; + + /* Remember the erase region we start on */ + first = i; + + /* Next, check that the end of the requested erase is aligned + * with the erase region at that address. + */ + + while (inumeraseregions && (instr->addr + instr->len) >= regions[i].offset) + i++; + + /* As before, drop back one to point at the region in which + the address actually falls + */ + i--; + + if ((instr->addr + instr->len) & (regions[i].erasesize-1)) + return -EINVAL; + + chipnum = instr->addr >> cfi->chipshift; + adr = instr->addr - (chipnum << cfi->chipshift); + len = instr->len; + + i=first; + + while(len) { + ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr); + + if (ret) + return ret; + + adr += regions[i].erasesize; + len -= regions[i].erasesize; + + if (adr % (1<< cfi->chipshift) == ((regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift))) + i++; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + instr->state = MTD_ERASE_DONE; + if (instr->callback) + instr->callback(instr); + + return 0; +} + +static int cfi_sststd_erase_onesize(struct mtd_info *mtd, struct erase_info *instr) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr, len; + int chipnum, ret = 0; + + if (instr->addr & (mtd->erasesize - 1)) + return -EINVAL; + + if (instr->len & (mtd->erasesize -1)) + return -EINVAL; + + if ((instr->len + instr->addr) > mtd->size) + return -EINVAL; + + chipnum = instr->addr >> cfi->chipshift; + adr = instr->addr - (chipnum << cfi->chipshift); + len = instr->len; + + while(len) { + ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr); + + if (ret) + return ret; + + adr += mtd->erasesize; + len -= mtd->erasesize; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + instr->state = MTD_ERASE_DONE; + if (instr->callback) + instr->callback(instr); + + return 0; +} + +static void cfi_sststd_sync (struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + DECLARE_WAITQUEUE(wait, current); + + for (i=0; !ret && inumchips; i++) { + chip = &cfi->chips[i]; + + retry: + cfi_spin_lock(chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_SYNCING; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_SYNCING: + cfi_spin_unlock(chip->mutex); + break; + + default: + /* Not an idle state */ + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + + remove_wait_queue(&chip->wq, &wait); + + goto retry; + } + } + + /* Unlock the chips again */ + + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + if (chip->state == FL_SYNCING) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + cfi_spin_unlock(chip->mutex); + } +} + + +static int cfi_sststd_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; +//printk("suspend\n"); + + for (i=0; !ret && inumchips; i++) { + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_PM_SUSPENDED; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_PM_SUSPENDED: + break; + + default: + ret = -EAGAIN; + break; + } + cfi_spin_unlock(chip->mutex); + } + + /* Unlock the chips again */ + + if (ret) { + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + cfi_spin_unlock(chip->mutex); + } + } + + return ret; +} + +static void cfi_sststd_resume(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; +//printk("resume\n"); + + for (i=0; inumchips; i++) { + + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + chip->state = FL_READY; + cfi_write(map, CMD(0xF0), chip->start); + wake_up(&chip->wq); + } + else + printk("Argh. Chip not in PM_SUSPENDED state upon resume()\n"); + + cfi_spin_unlock(chip->mutex); + } +} + +static void cfi_sststd_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + kfree(cfi->cmdset_priv); + kfree(cfi); +} + +#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) +#define cfi_sststd_init init_module +#define cfi_sststd_exit cleanup_module +#endif + +static char im_name[]="cfi_cmdset_0701"; + +mod_init_t cfi_sststd_init(void) +{ + inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0701); + return 0; +} + +mod_exit_t cfi_sststd_exit(void) +{ + inter_module_unregister(im_name); +} + +module_init(cfi_sststd_init); +module_exit(cfi_sststd_exit); + diff --git a/package/linux/kernel-source/drivers/mtd/devices/sflash.c b/package/linux/kernel-source/drivers/mtd/devices/sflash.c new file mode 100644 index 0000000000..4dbd76d877 --- /dev/null +++ b/package/linux/kernel-source/drivers/mtd/devices/sflash.c @@ -0,0 +1,283 @@ +/* + * Broadcom SiliconBackplane chipcommon serial flash interface + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTD_PARTITIONS +extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size); +#endif + +struct sflash_mtd { + chipcregs_t *cc; + struct semaphore lock; + struct mtd_info mtd; + struct mtd_erase_region_info region; +}; + +/* Private global state */ +static struct sflash_mtd sflash; + +static int +sflash_mtd_poll(struct sflash_mtd *sflash, unsigned int offset, int timeout) +{ + int now = jiffies; + int ret = 0; + + for (;;) { + if (!sflash_poll(sflash->cc, offset)) { + ret = 0; + break; + } + if (time_after(jiffies, now + timeout)) { + printk(KERN_ERR "sflash: timeout\n"); + ret = -ETIMEDOUT; + break; + } + if (current->need_resched) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(timeout / 10); + } else + udelay(1); + } + + return ret; +} + +static int +sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; + int bytes, ret = 0; + + /* Check address range */ + if (!len) + return 0; + if ((from + len) > mtd->size) + return -EINVAL; + + down(&sflash->lock); + + *retlen = 0; + while (len) { + if ((bytes = sflash_read(sflash->cc, (uint) from, len, buf)) < 0) { + ret = bytes; + break; + } + from += (loff_t) bytes; + len -= bytes; + buf += bytes; + *retlen += bytes; + } + + up(&sflash->lock); + + return ret; +} + +static int +sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +{ + struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; + int bytes, ret = 0; + + /* Check address range */ + if (!len) + return 0; + if ((to + len) > mtd->size) + return -EINVAL; + + down(&sflash->lock); + + *retlen = 0; + while (len) { + if ((bytes = sflash_write(sflash->cc, (uint) to, len, buf)) < 0) { + ret = bytes; + break; + } + if ((ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10))) + break; + to += (loff_t) bytes; + len -= bytes; + buf += bytes; + *retlen += bytes; + } + + up(&sflash->lock); + + return ret; +} + +static int +sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) +{ + struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; + int i, j, ret = 0; + unsigned int addr, len; + + /* Check address range */ + if (!erase->len) + return 0; + if ((erase->addr + erase->len) > mtd->size) + return -EINVAL; + + addr = erase->addr; + len = erase->len; + + down(&sflash->lock); + + /* Ensure that requested region is aligned */ + for (i = 0; i < mtd->numeraseregions; i++) { + for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { + if (addr == mtd->eraseregions[i].offset + mtd->eraseregions[i].erasesize * j && + len >= mtd->eraseregions[i].erasesize) { + if ((ret = sflash_erase(sflash->cc, addr)) < 0) + break; + if ((ret = sflash_mtd_poll(sflash, addr, 10 * HZ))) + break; + addr += mtd->eraseregions[i].erasesize; + len -= mtd->eraseregions[i].erasesize; + } + } + if (ret) + break; + } + + up(&sflash->lock); + + /* Set erase status */ + if (ret) + erase->state = MTD_ERASE_FAILED; + else + erase->state = MTD_ERASE_DONE; + + /* Call erase callback */ + if (erase->callback) + erase->callback(erase); + + return ret; +} + +#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) +#define sflash_mtd_init init_module +#define sflash_mtd_exit cleanup_module +#endif + +mod_init_t +sflash_mtd_init(void) +{ + struct pci_dev *pdev; + int ret = 0; + struct sflash *info; + uint i; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts; +#endif + + if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_CC, NULL))) { + printk(KERN_ERR "sflash: chipcommon not found\n"); + return -ENODEV; + } + + memset(&sflash, 0, sizeof(struct sflash_mtd)); + init_MUTEX(&sflash.lock); + + /* Map registers and flash base */ + if (!(sflash.cc = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)))) { + printk(KERN_ERR "sflash: error mapping registers\n"); + ret = -EIO; + goto fail; + } + + /* Initialize serial flash access */ + info = sflash_init(sflash.cc); + + if (!info) { + printk(KERN_ERR "sflash: found no supported devices\n"); + ret = -ENODEV; + goto fail; + } + + /* Setup region info */ + sflash.region.offset = 0; + sflash.region.erasesize = info->blocksize; + sflash.region.numblocks = info->numblocks; + if (sflash.region.erasesize > sflash.mtd.erasesize) + sflash.mtd.erasesize = sflash.region.erasesize; + sflash.mtd.size = info->size; + sflash.mtd.numeraseregions = 1; + + /* Register with MTD */ + sflash.mtd.name = "sflash"; + sflash.mtd.type = MTD_NORFLASH; + sflash.mtd.flags = MTD_CAP_NORFLASH; + sflash.mtd.eraseregions = &sflash.region; + sflash.mtd.module = THIS_MODULE; + sflash.mtd.erase = sflash_mtd_erase; + sflash.mtd.read = sflash_mtd_read; + sflash.mtd.write = sflash_mtd_write; + sflash.mtd.priv = &sflash; + +#ifdef CONFIG_MTD_PARTITIONS + parts = init_mtd_partitions(&sflash.mtd, sflash.mtd.size); + for (i = 0; parts[i].name; i++); + ret = add_mtd_partitions(&sflash.mtd, parts, i); +#else + ret = add_mtd_device(&sflash.mtd); +#endif + if (ret) { + printk(KERN_ERR "sflash: add_mtd failed\n"); + goto fail; + } + + return 0; + + fail: + if (sflash.cc) + iounmap((void *) sflash.cc); + return ret; +} + +mod_exit_t +sflash_mtd_exit(void) +{ +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(&sflash.mtd); +#else + del_mtd_device(&sflash.mtd); +#endif + iounmap((void *) sflash.cc); +} + +module_init(sflash_mtd_init); +module_exit(sflash_mtd_exit); diff --git a/package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c b/package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c new file mode 100644 index 0000000000..716867ff1a --- /dev/null +++ b/package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c @@ -0,0 +1,236 @@ +/* + * Flash mapping for BCM947XX boards + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* Global SB handle */ +extern void *bcm947xx_sbh; +extern spinlock_t bcm947xx_sbh_lock; + +/* Convenience */ +#define sbh bcm947xx_sbh +#define sbh_lock bcm947xx_sbh_lock + +#ifdef CONFIG_MTD_PARTITIONS +extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size); +#endif + +#define WINDOW_ADDR 0x1fc00000 +#define WINDOW_SIZE 0x400000 +#define BUSWIDTH 2 + +/* e.g., flash=2M or flash=4M */ +static int flash = 0; +MODULE_PARM(flash, "i"); +static int __init +bcm947xx_setup(char *str) +{ + flash = memparse(str, &str); + return 1; +} +__setup("flash=", bcm947xx_setup); + +static struct mtd_info *bcm947xx_mtd; + +__u8 bcm947xx_map_read8(struct map_info *map, unsigned long ofs) +{ + if (map->map_priv_2 == 1) + return __raw_readb(map->map_priv_1 + ofs); + + u16 val = __raw_readw(map->map_priv_1 + (ofs & ~1)); + if (ofs & 1) + return ((val >> 8) & 0xff); + else + return (val & 0xff); +} + +__u16 bcm947xx_map_read16(struct map_info *map, unsigned long ofs) +{ + return __raw_readw(map->map_priv_1 + ofs); +} + +__u32 bcm947xx_map_read32(struct map_info *map, unsigned long ofs) +{ + return __raw_readl(map->map_priv_1 + ofs); +} + +void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + if (len==1) { + memcpy_fromio(to, map->map_priv_1 + from, len); + } else { + int i; + u16 *dest = (u16 *) to; + u16 *src = (u16 *) (map->map_priv_1 + from); + for (i = 0; i < (len / 2); i++) { + dest[i] = src[i]; + } + if (len & 1) + *((u8 *)dest+len-1) = src[i] & 0xff; + } +} + +void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void bcm947xx_map_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void bcm947xx_map_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void bcm947xx_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + memcpy_toio(map->map_priv_1 + to, from, len); +} + +struct map_info bcm947xx_map = { + name: "Physically mapped flash", + size: WINDOW_SIZE, + buswidth: BUSWIDTH, + read8: bcm947xx_map_read8, + read16: bcm947xx_map_read16, + read32: bcm947xx_map_read32, + copy_from: bcm947xx_map_copy_from, + write8: bcm947xx_map_write8, + write16: bcm947xx_map_write16, + write32: bcm947xx_map_write32, + copy_to: bcm947xx_map_copy_to +}; + +#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) +#define init_bcm947xx_map init_module +#define cleanup_bcm947xx_map cleanup_module +#endif + +mod_init_t init_bcm947xx_map(void) +{ + ulong flags; + uint coreidx; + chipcregs_t *cc; + uint32 fltype; + uint window_addr = 0, window_size = 0; + size_t size; + int ret = 0; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts; + int i; +#endif + + spin_lock_irqsave(&sbh_lock, flags); + coreidx = sb_coreidx(sbh); + + /* Check strapping option if chipcommon exists */ + if ((cc = sb_setcore(sbh, SB_CC, 0))) { + fltype = readl(&cc->capabilities) & CAP_FLASH_MASK; + if (fltype == PFLASH) { + bcm947xx_map.map_priv_2 = 1; + window_addr = 0x1c000000; + bcm947xx_map.size = window_size = 32 * 1024 * 1024; + if ((readl(&cc->flash_config) & CC_CFG_DS) == 0) + bcm947xx_map.buswidth = 1; + } + } else { + fltype = PFLASH; + bcm947xx_map.map_priv_2 = 0; + window_addr = WINDOW_ADDR; + window_size = WINDOW_SIZE; + } + + sb_setcoreidx(sbh, coreidx); + spin_unlock_irqrestore(&sbh_lock, flags); + + if (fltype != PFLASH) { + printk(KERN_ERR "pflash: found no supported devices\n"); + ret = -ENODEV; + goto fail; + } + + bcm947xx_map.map_priv_1 = (unsigned long) ioremap(window_addr, window_size); + if (!bcm947xx_map.map_priv_1) { + printk(KERN_ERR "pflash: ioremap failed\n"); + ret = -EIO; + goto fail; + } + + if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { + printk(KERN_ERR "pflash: cfi_probe failed\n"); + ret = -ENXIO; + goto fail; + } + + bcm947xx_mtd->module = THIS_MODULE; + + /* Allow size override for testing */ + size = flash ? : bcm947xx_mtd->size; + + printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, window_addr); + +#ifdef CONFIG_MTD_PARTITIONS + parts = init_mtd_partitions(bcm947xx_mtd, size); + for (i = 0; parts[i].name; i++); + ret = add_mtd_partitions(bcm947xx_mtd, parts, i); + if (ret) { + printk(KERN_ERR "pflash: add_mtd_partitions failed\n"); + goto fail; + } +#endif + + return 0; + + fail: + if (bcm947xx_mtd) + map_destroy(bcm947xx_mtd); + if (bcm947xx_map.map_priv_1) + iounmap((void *) bcm947xx_map.map_priv_1); + bcm947xx_map.map_priv_1 = 0; + return ret; +} + +mod_exit_t cleanup_bcm947xx_map(void) +{ +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(bcm947xx_mtd); +#endif + map_destroy(bcm947xx_mtd); + iounmap((void *) bcm947xx_map.map_priv_1); + bcm947xx_map.map_priv_1 = 0; +} + +module_init(init_bcm947xx_map); +module_exit(cleanup_bcm947xx_map); diff --git a/package/linux/kernel-source/drivers/net/diag/Makefile b/package/linux/kernel-source/drivers/net/diag/Makefile new file mode 100644 index 0000000000..e00f095f9c --- /dev/null +++ b/package/linux/kernel-source/drivers/net/diag/Makefile @@ -0,0 +1,9 @@ +O_TARGET := diag.o + +MAC_OBJS := diag_led.o + +export-objs := +obj-y := $(MAC_OBJS) +obj-m := $(O_TARGET) + +include $(TOPDIR)/Rules.make diff --git a/package/linux/kernel-source/drivers/net/diag/diag_led.c b/package/linux/kernel-source/drivers/net/diag/diag_led.c new file mode 100644 index 0000000000..41cb17bf4d --- /dev/null +++ b/package/linux/kernel-source/drivers/net/diag/diag_led.c @@ -0,0 +1,210 @@ +// replacement diag module +// (c) 2004 openwrt +// mbm at alt dot org +// +// initial release 2004/03/28 +// +// 2004/08/26 asus & buffalo support added + +#include +#include +#include +#include +#include +#include +#include +#include + +extern char * nvram_get(const char *name); +static void *sbh; + +// v2.x - - - - - +#define DIAG_GPIO (1<<1) +#define DMZ_GPIO (1<<7) + +static void set_gpio(uint32 mask, uint32 value) { + sb_gpiocontrol(sbh,mask,0); + sb_gpioouten(sbh,mask,mask); + sb_gpioout(sbh,mask,value); +} + +static void v2_set_diag(u8 state) { + set_gpio(DIAG_GPIO,state); +} +static void v2_set_dmz(u8 state) { + set_gpio(DMZ_GPIO,state); +} + +// v1.x - - - - - +#define LED_DIAG 0x13 +#define LED_DMZ 0x12 + +static void v1_set_diag(u8 state) { + if (!state) { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; + } else { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); + } +} +static void v1_set_dmz(u8 state) { + if (!state) { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; + } else { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); + } +} + +// - - - - - +static void ignore(u8 ignored) {}; + +// - - - - - +#define BIT_DMZ 0x01 +#define BIT_DIAG 0x04 + +void (*set_diag)(u8 state); +void (*set_dmz)(u8 state); + +static unsigned int diag = 0; + +static void diag_change() +{ + //printk(KERN_INFO "led -> %02x\n",diag); + + set_diag(0xFF); // off + set_dmz(0xFF); // off + + if(diag & BIT_DIAG) + set_diag(0x00); // on + if(diag & BIT_DMZ) + set_dmz(0x00); // on +} + +static int proc_diag(ctl_table *table, int write, struct file *filp, + void *buffer, size_t *lenp) +{ + int r; + r = proc_dointvec(table, write, filp, buffer, lenp); + if (write && !r) { + diag_change(); + } + return r; +} + +// - - - - - +static unsigned char reset_gpio = 0; +static unsigned char reset_polarity = 0; +static unsigned int reset = 0; + +static int proc_reset(ctl_table *table, int write, struct file *filp, + void *buffer, size_t *lenp) +{ + + if (reset_gpio) { + sb_gpiocontrol(sbh,reset_gpio,reset_gpio); + sb_gpioouten(sbh,reset_gpio,0); + reset=!(sb_gpioin(sbh)&reset_gpio); + + if (reset_polarity) reset=!reset; + } else { + reset=0; + } + + return proc_dointvec(table, write, filp, buffer, lenp); +} + +// - - - - - +static struct ctl_table_header *diag_sysctl_header; + +static ctl_table sys_diag[] = { + { + ctl_name: 2000, + procname: "diag", + data: &diag, + maxlen: sizeof(diag), + mode: 0644, + proc_handler: proc_diag + }, + { + ctl_name: 2001, + procname: "reset", + data: &reset, + maxlen: sizeof(reset), + mode: 0444, + proc_handler: proc_reset + }, + { 0 } +}; + +static int __init diag_init() +{ + char *buf; + u32 board_type; + sbh = sb_kattach(); + sb_gpiosetcore(sbh); + + board_type = sb_boardtype(sbh); + printk(KERN_INFO "diag boardtype: %08x\n",board_type); + + set_diag=ignore; + set_dmz=ignore; + + if ((board_type & 0xf00) == 0x400) { + board_type=1; + buf=nvram_get("boardtype")?:""; + if (!strcmp(buf,"bcm94710dev")) { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + // wrt54g v1.x + set_diag=v1_set_diag; + set_dmz=v1_set_dmz; + reset_gpio=(1<<6); + reset_polarity=0; + } else if (!strcmp(buf,"asusX")) { + //asus wl-500g + //no leds + reset_gpio=(1<<6); + reset_polarity=1; + } + } else if (!strcmp(buf,"bcm94710ap")) { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + // buffalo + set_dmz=v2_set_dmz; + reset_gpio=(1<<4); + reset_polarity=1; + } else if (!strcmp(buf,"44")) { + //dell truemobile + set_dmz=v2_set_dmz; + reset_gpio=(1<<0); + reset_polarity=0; + } + } + } else { + board_type=2; + set_diag=v2_set_diag; + set_dmz=v2_set_dmz; + reset_gpio=(1<<6); + reset_polarity=0; + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"44")) { + set_diag=ignore; + set_dmz=ignore; + reset_gpio=(1<<5); + reset_polarity=0; + } + } + printk(KERN_INFO "using v%d hardware\n",board_type); + + diag_sysctl_header = register_sysctl_table(sys_diag, 0); + diag_change(); + + return 0; +} + +static void __exit diag_exit() +{ + unregister_sysctl_table(diag_sysctl_header); +} + +module_init(diag_init); +module_exit(diag_exit); diff --git a/package/linux/kernel-source/drivers/net/et/Makefile b/package/linux/kernel-source/drivers/net/et/Makefile new file mode 100644 index 0000000000..152b18e9ad --- /dev/null +++ b/package/linux/kernel-source/drivers/net/et/Makefile @@ -0,0 +1,34 @@ +# +# Makefile for the Broadcom et driver +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := et.o + +ET_OBJS := et_linux.o etc.o + +ifeq ($(CONFIG_ET_47XX),y) +ET_OBJS += etc47xx.o etc_robo.o etc_adm.o +EXTRA_CFLAGS += -DBCM47XX_CHOPS +endif +ifeq ($(CONFIG_ET_4413),y) +ET_OBJS += etc4413.o +EXTRA_CFLAGS += -DBCM4413_CHOPS +endif + +export-objs := +obj-y := $(ET_OBJS) +obj-m := $(O_TARGET) + +EXTRA_CFLAGS += -DDMA + +include $(TOPDIR)/Rules.make diff --git a/package/linux/kernel-source/drivers/net/hnd/Config.in b/package/linux/kernel-source/drivers/net/hnd/Config.in new file mode 100644 index 0000000000..5ced207f33 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/Config.in @@ -0,0 +1,35 @@ +# +# Broadcom Home Networking Division (HND) driver configuration +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# + +mainmenu_option next_comment +comment 'Broadcom HND network devices' + tristate 'Broadcom HND network device support' CONFIG_HND $CONFIG_PCI + if [ "$CONFIG_HND" != "n" ]; then + dep_tristate ' Broadcom InsideLine HPNA support' CONFIG_IL $CONFIG_HND + if [ "$CONFIG_IL" != "n" ]; then + bool ' Broadcom BCM42xx support' CONFIG_IL_42XX + bool ' Broadcom BCM47xx support' CONFIG_IL_47XX + int ' LARQ buffer allocation (0 = tiny, 2 = huge)' CONFIG_LARQ_BUF 0 + fi + dep_tristate ' Broadcom 10/100 Ethernet support' CONFIG_ET $CONFIG_HND + if [ "$CONFIG_ET" != "n" ]; then + bool ' Broadcom BCM4413 support' CONFIG_ET_4413 + bool ' Broadcom BCM47xx support' CONFIG_ET_47XX + fi + dep_tristate ' Broadcom BCM43xx 802.11 Wireless support' CONFIG_WL $CONFIG_HND + if [ "$CONFIG_WL" != "n" ]; then + bool ' Access Point Mode Supported' CONFIG_WL_AP + bool ' STA Mode Supported' CONFIG_WL_STA + bool ' OID Interface Supported' CONFIG_WL_OID + fi + fi +endmenu diff --git a/package/linux/kernel-source/drivers/net/hnd/Makefile b/package/linux/kernel-source/drivers/net/hnd/Makefile new file mode 100644 index 0000000000..5adaa5abed --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/Makefile @@ -0,0 +1,30 @@ +# +# Makefile for Broadcom Home Networking Division (HND) shared driver code +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := hnd.o + +HND_OBJS := bcmutils.o hnddma.o linux_osl.o sbutils.o bcmsrom.o + +ifneq ($(CONFIG_BCM947XX),y) +HND_OBJS += nvramstubs.o +endif + +export-objs := shared_ksyms.o +obj-y := shared_ksyms.o $(HND_OBJS) +obj-m := $(O_TARGET) + +include $(TOPDIR)/Rules.make + +shared_ksyms.c: shared_ksyms.sh $(HND_OBJS) + sh -e $< $(HND_OBJS) > $@ diff --git a/package/linux/kernel-source/drivers/net/hnd/bcmsrom.c b/package/linux/kernel-source/drivers/net/hnd/bcmsrom.c new file mode 100644 index 0000000000..8a0f05d955 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/bcmsrom.c @@ -0,0 +1,711 @@ +/* + * Misc useful routines to access NIC SROM + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include /* for sprom content groking */ + +#define VARS_MAX 4096 /* should be reduced */ + +static int initvars_srom_pci(void *curmap, char **vars, int *count); +static int initvars_cis_pcmcia(void *sbh, void *curmap, void *osh, char **vars, int *count); +static int sprom_cmd_pcmcia(void *osh, uint8 cmd); +static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data); +static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data); +static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc); + +/* + * Initialize the vars from the right source for this platform. + * Return 0 on success, nonzero on error. + */ +int +srom_var_init(void *sbh, uint bus, void *curmap, void *osh, char **vars, int *count) +{ + if (vars == NULL) + return (0); + + switch (bus) { + case SB_BUS: + /* These two could be asserts ... */ + *vars = NULL; + *count = 0; + return(0); + + case PCI_BUS: + ASSERT(curmap); /* can not be NULL */ + return(initvars_srom_pci(curmap, vars, count)); + + case PCMCIA_BUS: + return(initvars_cis_pcmcia(sbh, curmap, osh, vars, count)); + + + default: + ASSERT(0); + } + return (-1); +} + + +/* support only 16-bit word read from srom */ +int +srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) +{ + void *srom; + uint i, off, nw; + + /* check input - 16-bit access only */ + if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) + return 1; + + if (bus == PCI_BUS) { + if (!curmap) + return 1; + srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET); + if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE)) + return 1; + } else if (bus == PCMCIA_BUS) { + off = byteoff / 2; + nw = nbytes / 2; + for (i = 0; i < nw; i++) { + if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) + return 1; + } + } else { + return 1; + } + + return 0; +} + +/* support only 16-bit word write into srom */ +int +srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) +{ + uint16 *srom; + uint i, off, nw, crc_range; + uint16 image[SPROM_SIZE], *p; + uint8 crc; + volatile uint32 val32; + + /* check input - 16-bit access only */ + if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) + return 1; + + crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; + + /* if changes made inside crc cover range */ + if (byteoff < crc_range) { + nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; + /* read data including entire first 64 words from srom */ + if (srom_read(bus, curmap, osh, 0, nw * 2, image)) + return 1; + /* make changes */ + bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); + /* calculate crc */ + htol16_buf(image, crc_range); + crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); + ltoh16_buf(image, crc_range); + image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); + p = image; + off = 0; + } else { + p = buf; + off = byteoff / 2; + nw = nbytes / 2; + } + + if (bus == PCI_BUS) { + srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET); + /* enable writes to the SPROM */ + val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); + val32 |= SPROM_WRITEEN; + OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); + bcm_mdelay(500); + /* write srom */ + for (i = 0; i < nw; i++) { + W_REG(&srom[off + i], p[i]); + bcm_mdelay(20); + } + /* disable writes to the SPROM */ + OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); + } else if (bus == PCMCIA_BUS) { + /* enable writes to the SPROM */ + if (sprom_cmd_pcmcia(osh, SROM_WEN)) + return 1; + bcm_mdelay(500); + /* write srom */ + for (i = 0; i < nw; i++) { + sprom_write_pcmcia(osh, (uint16)(off + i), p[i]); + bcm_mdelay(20); + } + /* disable writes to the SPROM */ + if (sprom_cmd_pcmcia(osh, SROM_WDS)) + return 1; + } else { + return 1; + } + + bcm_mdelay(500); + return 0; +} + + +int +srom_parsecis(uint8 *cis, char **vars, int *count) +{ + char eabuf[32]; + char *vp, *base; + uint8 tup, tlen, sromrev = 1; + int i, j; + uint varsize; + bool ag_init = FALSE; + uint16 w; + + ASSERT(vars); + ASSERT(count); + + base = vp = MALLOC(VARS_MAX); + ASSERT(vp); + + i = 0; + do { + tup = cis[i++]; + tlen = cis[i++]; + if ((i + tlen) >= CIS_SIZE) + break; + + switch (tup) { + case CISTPL_MANFID: + vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); + vp++; + vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); + vp++; + break; + + case CISTPL_FUNCE: + if (cis[i] == LAN_NID) { + ASSERT(cis[i + 1] == ETHER_ADDR_LEN); + bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); + vp += sprintf(vp, "il0macaddr=%s", eabuf); + vp++; + } + break; + + case CISTPL_CFTABLE: + vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); + vp++; + break; + + case CISTPL_BRCM_HNBU: + switch (cis[i]) { + case HNBU_CHIPID: + vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]); + vp++; + vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]); + vp++; + if (tlen == 7) { + vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]); + vp++; + } + break; + + case HNBU_BOARDREV: + vp += sprintf(vp, "boardrev=%d", cis[i + 1]); + vp++; + break; + + case HNBU_AA: + vp += sprintf(vp, "aa0=%d", cis[i + 1]); + vp++; + break; + + case HNBU_AG: + vp += sprintf(vp, "ag0=%d", cis[i + 1]); + vp++; + ag_init = TRUE; + break; + + case HNBU_CC: + vp += sprintf(vp, "cc=%d", cis[i + 1]); + vp++; + break; + + case HNBU_PAPARMS: + vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]); + vp++; + if (tlen == 9) { + /* New version */ + for (j = 0; j < 3; j++) { + vp += sprintf(vp, "pa0b%d=%d", j, + (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]); + vp++; + } + vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); + vp++; + } + break; + + case HNBU_OEM: + vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", + cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4], + cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]); + vp++; + break; + case HNBU_BOARDFLAGS: + w = (cis[i + 2] << 8) + cis[i + 1]; + if (w == 0xffff) w = 0; + vp += sprintf(vp, "boardflags=%d", w); + vp++; + break; + case HNBU_LED: + if (cis[i + 1] != 0xff) { + vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]); + vp++; + } + if (cis[i + 2] != 0xff) { + vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]); + vp++; + } + if (cis[i + 3] != 0xff) { + vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]); + vp++; + } + if (cis[i + 4] != 0xff) { + vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]); + vp++; + } + break; + } + break; + + } + i += tlen; + } while (tup != 0xff); + + /* Set the srom version */ + vp += sprintf(vp, "sromrev=%d", sromrev); + vp++; + + /* For now just set boardflags2 to zero */ + vp += sprintf(vp, "boardflags2=0"); + vp++; + + /* if there is no antenna gain field, set default */ + if (ag_init == FALSE) { + vp += sprintf(vp, "ag0=%d", 0xff); + vp++; + } + + /* final nullbyte terminator */ + *vp++ = '\0'; + varsize = (uint)vp - (uint)base; + + ASSERT(varsize < VARS_MAX); + + if (varsize == VARS_MAX) { + *vars = base; + } else { + vp = MALLOC(varsize); + ASSERT(vp); + bcopy(base, vp, varsize); + MFREE(base, VARS_MAX); + *vars = vp; + } + *count = varsize; + + return (0); +} + + +/* set PCMCIA sprom command register */ +static int +sprom_cmd_pcmcia(void *osh, uint8 cmd) +{ + uint8 status; + uint wait_cnt = 1000; + + /* write sprom command register */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); + + /* wait status */ + while (wait_cnt--) { + OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); + if (status & SROM_DONE) + return 0; + } + + return 1; +} + +/* read a word from the PCMCIA srom */ +static int +sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data) +{ + uint8 addr_l, addr_h, data_l, data_h; + + addr_l = (uint8)((addr * 2) & 0xff); + addr_h = (uint8)(((addr * 2) >> 8) & 0xff); + + /* set address */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); + + /* do read */ + if (sprom_cmd_pcmcia(osh, SROM_READ)) + return 1; + + /* read data */ + OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); + OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); + + *data = (data_h << 8) | data_l; + return 0; +} + +/* write a word to the PCMCIA srom */ +static int +sprom_write_pcmcia(void *osh, uint16 addr, uint16 data) +{ + uint8 addr_l, addr_h, data_l, data_h; + + addr_l = (uint8)((addr * 2) & 0xff); + addr_h = (uint8)(((addr * 2) >> 8) & 0xff); + data_l = (uint8)(data & 0xff); + data_h = (uint8)((data >> 8) & 0xff); + + /* set address */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); + + /* write data */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); + OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); + + /* do write */ + return sprom_cmd_pcmcia(osh, SROM_WRITE); +} + +/* + * Read in and validate sprom. + * Return 0 on success, nonzero on error. + */ +static int +sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc) +{ + int off, nw; + uint8 chk8; + int i; + + off = byteoff / 2; + nw = ROUNDUP(nbytes, 2) / 2; + + /* read the sprom */ + for (i = 0; i < nw; i++) + buf[i] = R_REG(&sprom[off + i]); + + if (check_crc) { + /* fixup the endianness so crc8 will pass */ + htol16_buf(buf, nw * 2); + if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE) + return (1); + /* now correct the endianness of the byte array */ + ltoh16_buf(buf, nw * 2); + } + + return (0); +} + +/* + * Initialize nonvolatile variable table from sprom. + * Return 0 on success, nonzero on error. + */ + +static int +initvars_srom_pci(void *curmap, char **vars, int *count) +{ + uint16 w, b[64]; + uint8 sromrev; + struct ether_addr ea; + char eabuf[32]; + uint32 bfl; + int c, woff, i; + char *vp, *base; + + if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE)) + return (-1); + + /* top word of sprom contains version and crc8 */ + sromrev = b[63] & 0xff; + if ((sromrev != 1) && (sromrev != 2)) { + return (-2); + } + + ASSERT(vars); + ASSERT(count); + + base = vp = MALLOC(VARS_MAX); + ASSERT(vp); + + vp += sprintf(vp, "sromrev=%d", sromrev); + vp++; + + if (sromrev >= 2) { + /* New section takes over the 4th hardware function space */ + + /* Word 29 is max power 11a high/low */ + w = b[29]; + vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); + vp++; + vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); + vp++; + + /* Words 30-32 set the 11alow pa settings, + * 33-35 are the 11ahigh ones. + */ + for (i = 0; i < 3; i++) { + vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); + vp++; + vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); + vp++; + } + w = b[59]; + if (w == 0) + vp += sprintf(vp, "ccode="); + else + vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); + vp++; + + } + + /* parameter section of sprom starts at byte offset 72 */ + woff = 72/2; + + /* first 6 bytes are il0macaddr */ + ea.octet[0] = (b[woff] >> 8) & 0xff; + ea.octet[1] = b[woff] & 0xff; + ea.octet[2] = (b[woff+1] >> 8) & 0xff; + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; + woff += ETHER_ADDR_LEN/2 ; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "il0macaddr=%s", eabuf); + vp++; + + /* next 6 bytes are et0macaddr */ + ea.octet[0] = (b[woff] >> 8) & 0xff; + ea.octet[1] = b[woff] & 0xff; + ea.octet[2] = (b[woff+1] >> 8) & 0xff; + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; + woff += ETHER_ADDR_LEN/2 ; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "et0macaddr=%s", eabuf); + vp++; + + /* next 6 bytes are et1macaddr */ + ea.octet[0] = (b[woff] >> 8) & 0xff; + ea.octet[1] = b[woff] & 0xff; + ea.octet[2] = (b[woff+1] >> 8) & 0xff; + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; + woff += ETHER_ADDR_LEN/2 ; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "et1macaddr=%s", eabuf); + vp++; + + /* + * Enet phy settings one or two singles or a dual + * Bits 4-0 : MII address for enet0 (0x1f for not there) + * Bits 9-5 : MII address for enet1 (0x1f for not there) + * Bit 14 : Mdio for enet0 + * Bit 15 : Mdio for enet1 + */ + w = b[woff]; + vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); + vp++; + vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); + vp++; + vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); + vp++; + vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); + vp++; + + /* Word 46 has board rev, antennas 0/1 & Country code/control */ + w = b[46]; + vp += sprintf(vp, "boardrev=%d", w & 0xff); + vp++; + + if (sromrev > 1) + vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); + else + vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); + vp++; + + vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); + vp++; + + vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); + vp++; + + /* Words 47-49 set the (wl) pa settings */ + woff = 47; + + for (i = 0; i < 3; i++) { + vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); + vp++; + vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); + vp++; + } + + /* + * Words 50-51 set the customer-configured wl led behavior. + * 8 bits/gpio pin. High bit: activehi=0, activelo=1; + * LED behavior values defined in wlioctl.h . + */ + w = b[50]; + if ((w != 0) && (w != 0xffff)) { + /* gpio0 */ + vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); + vp++; + + /* gpio1 */ + vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); + vp++; + } + w = b[51]; + if ((w != 0) && (w != 0xffff)) { + /* gpio2 */ + vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); + vp++; + + /* gpio3 */ + vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); + vp++; + } + + /* Word 52 is max power 0/1 */ + w = b[52]; + vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); + vp++; + vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); + vp++; + + /* Word 56 is idle tssi target 0/1 */ + w = b[56]; + vp += sprintf(vp, "pa0itssit=%d", w & 0xff); + vp++; + vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); + vp++; + + /* Word 57 is boardflags, if not programmed make it zero */ + bfl = (uint32)b[57]; + if (bfl == 0xffff) bfl = 0; + if (sromrev > 1) { + /* Word 28 is boardflags2 */ + bfl |= (uint32)b[28] << 16; + } + vp += sprintf(vp, "boardflags=%d", bfl); + vp++; + + /* Word 58 is antenna gain 0/1 */ + w = b[58]; + vp += sprintf(vp, "ag0=%d", w & 0xff); + vp++; + + vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); + vp++; + + if (sromrev == 1) { + /* set the oem string */ + vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", + ((b[59] >> 8) & 0xff), (b[59] & 0xff), + ((b[60] >> 8) & 0xff), (b[60] & 0xff), + ((b[61] >> 8) & 0xff), (b[61] & 0xff), + ((b[62] >> 8) & 0xff), (b[62] & 0xff)); + vp++; + } else { + if (sromrev >= 1){ + /* Word 60 OFDM tx power offset from CCK level */ + /* OFDM Power Offset - opo */ + w = b[60] & 0xff; + if (w == 0xff) + w = 16; + vp += sprintf(vp, "opo=%d", w); + vp++; + } + } + + /* final nullbyte terminator */ + *vp++ = '\0'; + + c = vp - base; + ASSERT(c <= VARS_MAX); + + if (c == VARS_MAX) { + *vars = base; + } else { + vp = MALLOC(c); + ASSERT(vp); + bcopy(base, vp, c); + MFREE(base, VARS_MAX); + *vars = vp; + } + *count = c; + + return (0); +} + +/* + * Read the cis and call parsecis to initialize the vars. + * Return 0 on success, nonzero on error. + */ +static int +initvars_cis_pcmcia(void *sbh, void *curmap, void *osh, char **vars, int *count) +{ + uint8 *cis = NULL; + int rc; + uint data_sz; + + data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE; + + if ((cis = MALLOC(data_sz)) == NULL) + return (-1); + + if (sb_pcmciarev(sbh) == 1) { + if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) { + MFREE(cis, data_sz); + return (-1); + } + /* fix up endianess for 16-bit data vs 8-bit parsing */ + ltoh16_buf((uint16 *)cis, data_sz); + } else + OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz); + + rc = srom_parsecis(cis, vars, count); + + MFREE(cis, data_sz); + + return (rc); +} + diff --git a/package/linux/kernel-source/drivers/net/hnd/bcmutils.c b/package/linux/kernel-source/drivers/net/hnd/bcmutils.c new file mode 100644 index 0000000000..0b704d41b1 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/bcmutils.c @@ -0,0 +1,803 @@ +/* + * Misc useful OS-independent routines. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#include +#include +#include +#include +#include + +unsigned char bcm_ctype[] = { + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ + _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ + _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ + _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ + _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ + _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ + _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ + _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ + _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ + _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ +}; + +uchar +bcm_toupper(uchar c) +{ + if (bcm_islower(c)) + c -= 'a'-'A'; + return (c); +} + +ulong +bcm_strtoul(char *cp, char **endp, uint base) +{ + ulong result, value; + bool minus; + + minus = FALSE; + + while (bcm_isspace(*cp)) + cp++; + + if (cp[0] == '+') + cp++; + else if (cp[0] == '-') { + minus = TRUE; + cp++; + } + + if (base == 0) { + if (cp[0] == '0') { + if ((cp[1] == 'x') || (cp[1] == 'X')) { + base = 16; + cp = &cp[2]; + } else { + base = 8; + cp = &cp[1]; + } + } else + base = 10; + } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { + cp = &cp[2]; + } + + result = 0; + + while (bcm_isxdigit(*cp) && + (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { + result = result*base + value; + cp++; + } + + if (minus) + result = (ulong)(result * -1); + + if (endp) + *endp = (char *)cp; + + return (result); +} + +uint +bcm_atoi(char *s) +{ + uint n; + + n = 0; + + while (bcm_isdigit(*s)) + n = (n * 10) + *s++ - '0'; + return (n); +} + +void +deadbeef(char *p, uint len) +{ + static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef }; + + while (len-- > 0) { + *p = meat[((uint)p) & 3]; + p++; + } +} + +/* pretty hex print a contiguous buffer */ +void +prhex(char *msg, uchar *buf, uint nbytes) +{ + char line[256]; + char* p; + uint i; + + if (msg && (msg[0] != '\0')) + printf("%s: ", msg); + + p = line; + for (i = 0; i < nbytes; i++) { + if (i % 16 == 0) { + p += sprintf(p, "%04d: ", i); /* line prefix */ + } + p += sprintf(p, "%02x ", buf[i]); + if (i % 16 == 15) { + printf("%s\n", line); /* flush line */ + p = line; + } + } + + /* flush last partial line */ + if (p != line) + printf("%s\n", line); +} + +/* pretty hex print a pkt buffer chain */ +void +prpkt(char *msg, void *drv, void *p0) +{ + void *p; + + if (msg && (msg[0] != '\0')) + printf("%s: ", msg); + + for (p = p0; p; p = PKTNEXT(drv, p)) + prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p)); +} + +/* copy a pkt buffer chain into a buffer */ +uint +pktcopy(void *drv, void *p, uint offset, int len, uchar *buf) +{ + uint n, ret = 0; + + if (len < 0) + len = 4096; /* "infinite" */ + + /* skip 'offset' bytes */ + for (; p && offset; p = PKTNEXT(drv, p)) { + if (offset < (uint)PKTLEN(drv, p)) + break; + offset -= PKTLEN(drv, p); + } + + if (!p) + return 0; + + /* copy the data */ + for (; p && len; p = PKTNEXT(drv, p)) { + n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len); + bcopy(PKTDATA(drv, p) + offset, buf, n); + buf += n; + len -= n; + ret += n; + offset = 0; + } + + return ret; +} + +/* return total length of buffer chain */ +uint +pkttotlen(void *drv, void *p) +{ + uint total; + + total = 0; + for (; p; p = PKTNEXT(drv, p)) + total += PKTLEN(drv, p); + return (total); +} + + +uchar* +bcm_ether_ntoa(char *ea, char *buf) +{ + sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", + (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, + (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); + return (buf); +} + +/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ +int +bcm_ether_atoe(char *p, char *ea) +{ + int i = 0; + + for (;;) { + ea[i++] = (char) bcm_strtoul(p, &p, 16); + if (!*p++ || i == 6) + break; + } + + return (i == 6); +} + +/* + * Advance from the current 1-byte tag/1-byte length/variable-length value + * triple, to the next, returning a pointer to the next. + */ +bcm_tlv_t * +bcm_next_tlv(bcm_tlv_t *elt, int *buflen) +{ + int len; + + /* validate current elt */ + if (*buflen < 2) { + return NULL; + } + + len = elt->len; + + /* validate remaining buflen */ + if (*buflen >= (2 + len + 2)) { + elt = (bcm_tlv_t*)(elt->data + len); + *buflen -= (2 + len); + } else { + elt = NULL; + } + + return elt; +} + +/* + * Traverse a string of 1-byte tag/1-byte length/variable-length value + * triples, returning a pointer to the substring whose first element + * matches tag. Stop parsing when we see an element whose ID is greater + * than the target key. + */ +bcm_tlv_t * +bcm_parse_ordered_tlvs(void *buf, int buflen, uint key) +{ + bcm_tlv_t *elt; + int totlen; + + elt = (bcm_tlv_t*)buf; + totlen = buflen; + + /* find tagged parameter */ + while (totlen >= 2) { + uint id = elt->id; + int len = elt->len; + + /* Punt if we start seeing IDs > than target key */ + if (id > key) + return(NULL); + + /* validate remaining totlen */ + if ((id == key) && (totlen >= (len + 2))) + return (elt); + + elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); + totlen -= (len + 2); + } + return NULL; +} + + +/* + * Traverse a string of 1-byte tag/1-byte length/variable-length value + * triples, returning a pointer to the substring whose first element + * matches tag + */ +bcm_tlv_t * +bcm_parse_tlvs(void *buf, int buflen, uint key) +{ + bcm_tlv_t *elt; + int totlen; + + elt = (bcm_tlv_t*)buf; + totlen = buflen; + + /* find tagged parameter */ + while (totlen >= 2) { + int len = elt->len; + + /* validate remaining totlen */ + if ((elt->id == key) && (totlen >= (len + 2))) + return (elt); + + elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); + totlen -= (len + 2); + } + + return NULL; +} + +void +pktq_init(struct pktq *q, uint maxlen, bool priority) +{ + q->head = q->tail = NULL; + q->priority = priority; + q->maxlen = maxlen; + q->len = 0; +} + +bool +pktenq(struct pktq *q, void *p, bool lifo) +{ + void *next, *prev; + + /* Queue is full */ + if (q->len >= q->maxlen) + return FALSE; + + /* Queueing chains not allowed */ + ASSERT(PKTLINK(p) == NULL); + + /* Queue is empty */ + if (q->tail == NULL) { + ASSERT(q->head == NULL); + q->head = q->tail = p; + } + + /* Insert at head or tail */ + else if (q->priority == FALSE) { + /* Insert at head (LIFO) */ + if (lifo) { + PKTSETLINK(p, q->head); + q->head = p; + } + /* Insert at tail (FIFO) */ + else { + ASSERT(PKTLINK(q->tail) == NULL); + PKTSETLINK(q->tail, p); + PKTSETLINK(p, NULL); + q->tail = p; + } + } + + /* Insert by priority */ + else { + ASSERT(q->head); + ASSERT(q->tail); + /* Shortcut to insertion at tail */ + if (PKTPRIO(p) < PKTPRIO(q->tail) || + (!lifo && PKTPRIO(p) <= PKTPRIO(q->tail))) { + prev = q->tail; + next = NULL; + } + /* Insert at head or in the middle */ + else { + prev = NULL; + next = q->head; + } + /* Walk the queue */ + for (; next; prev = next, next = PKTLINK(next)) { + /* Priority queue invariant */ + ASSERT(!prev || PKTPRIO(prev) >= PKTPRIO(next)); + /* Insert at head of string of packets of same priority (LIFO) */ + if (lifo) { + if (PKTPRIO(p) >= PKTPRIO(next)) + break; + } + /* Insert at tail of string of packets of same priority (FIFO) */ + else { + if (PKTPRIO(p) > PKTPRIO(next)) + break; + } + } + /* Insert at tail */ + if (next == NULL) { + ASSERT(PKTLINK(q->tail) == NULL); + PKTSETLINK(q->tail, p); + PKTSETLINK(p, NULL); + q->tail = p; + } + /* Insert in the middle */ + else if (prev) { + PKTSETLINK(prev, p); + PKTSETLINK(p, next); + } + /* Insert at head */ + else { + PKTSETLINK(p, q->head); + q->head = p; + } + } + + /* List invariants after insertion */ + ASSERT(q->head); + ASSERT(PKTLINK(q->tail) == NULL); + + q->len++; + return TRUE; +} + +void* +pktdeq(struct pktq *q) +{ + void *p; + + if ((p = q->head)) { + ASSERT(q->tail); + q->head = PKTLINK(p); + PKTSETLINK(p, NULL); + q->len--; + if (q->head == NULL) + q->tail = NULL; + } + else { + ASSERT(q->tail == NULL); + } + + return (p); +} + +/******************************************************************************* + * crc8 + * + * Computes a crc8 over the input data using the polynomial: + * + * x^8 + x^7 +x^6 + x^4 + x^2 + 1 + * + * The caller provides the initial value (either CRC8_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When checking, a final + * return value of CRC8_GOOD_VALUE indicates a valid CRC. + * + * Reference: Dallas Semiconductor Application Note 27 + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", + * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt + * + ******************************************************************************/ + +static uint8 crc8_table[256] = { + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F +}; + +/* + * Search the name=value vars for a specific one and return its value. + * Returns NULL if not found. + */ +char* +getvar(char *vars, char *name) +{ + char *s; + int len; + + len = strlen(name); + + /* first look in vars[] */ + for (s = vars; s && *s; ) { + if ((bcmp(s, name, len) == 0) && (s[len] == '=')) + return (&s[len+1]); + + while (*s++) + ; + } + + /* then query nvram */ + return (nvram_get(name)); +} + +/* + * Search the vars for a specific one and return its value as + * an integer. Returns 0 if not found. + */ +int +getintvar(char *vars, char *name) +{ + char *val; + + if ((val = getvar(vars, name)) == NULL) + return (0); + + return (bcm_strtoul(val, NULL, 0)); +} + +/* return pointer to location of substring 'needle' in 'haystack' */ +char* +bcmstrstr(char *haystack, char *needle) +{ + int len, nlen; + int i; + + if ((haystack == NULL) || (needle == NULL)) + return (haystack); + + nlen = strlen(needle); + len = strlen(haystack) - nlen + 1; + + for (i = 0; i < len; i++) + if (bcmp(needle, &haystack[i], nlen) == 0) + return (&haystack[i]); + return (NULL); +} + +void +bcm_mdelay(uint ms) +{ + uint i; + + for (i = 0; i < ms; i++) { + OSL_DELAY(1000); + } +} + +#define CRC_INNER_LOOP(n, c, x) \ + (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] + +uint8 +crc8( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint8 crc /* either CRC8_INIT_VALUE or previous return value */ +) +{ + /* hard code the crc loop instead of using CRC_INNER_LOOP macro + * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ + while (nbytes-- > 0) + crc = crc8_table[(crc ^ *pdata++) & 0xff]; + + return crc; +} + +/******************************************************************************* + * crc16 + * + * Computes a crc16 over the input data using the polynomial: + * + * x^16 + x^12 +x^5 + 1 + * + * The caller provides the initial value (either CRC16_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When checking, a final + * return value of CRC16_GOOD_VALUE indicates a valid CRC. + * + * Reference: Dallas Semiconductor Application Note 27 + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", + * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt + * + ******************************************************************************/ + +static uint16 crc16_table[256] = { + 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF, + 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7, + 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E, + 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876, + 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD, + 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5, + 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C, + 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974, + 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB, + 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3, + 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A, + 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72, + 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9, + 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1, + 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738, + 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70, + 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7, + 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF, + 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036, + 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E, + 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5, + 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD, + 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134, + 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C, + 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3, + 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB, + 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232, + 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A, + 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1, + 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9, + 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330, + 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78 +}; + +uint16 +crc16( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint16 crc /* either CRC16_INIT_VALUE or previous return value */ +) +{ + while (nbytes-- > 0) + CRC_INNER_LOOP(16, crc, *pdata++); + return crc; +} + +static uint32 crc32_table[256] = { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; + +uint32 +crc32( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint32 crc /* either CRC32_INIT_VALUE or previous return value */ +) +{ + uint8 *pend; +#ifdef __mips__ + uint8 tmp[4]; + ulong *tptr = (ulong *)tmp; + + /* in case the beginning of the buffer isn't aligned */ + pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc); + nbytes -= (pend - pdata); + while (pdata < pend) + CRC_INNER_LOOP(32, crc, *pdata++); + + /* handle bulk of data as 32-bit words */ + pend = pdata + (nbytes & 0xfffffffc); + while (pdata < pend) { + *tptr = *((ulong *)pdata)++; + CRC_INNER_LOOP(32, crc, tmp[0]); + CRC_INNER_LOOP(32, crc, tmp[1]); + CRC_INNER_LOOP(32, crc, tmp[2]); + CRC_INNER_LOOP(32, crc, tmp[3]); + } + + /* 1-3 bytes at end of buffer */ + pend = pdata + (nbytes & 0x03); + while (pdata < pend) + CRC_INNER_LOOP(32, crc, *pdata++); +#else + pend = pdata + nbytes; + while (pdata < pend) + CRC_INNER_LOOP(32, crc, *pdata++); +#endif + + return crc; +} + +#ifdef notdef +#define CLEN 1499 +#define CBUFSIZ (CLEN+4) +#define CNBUFS 5 + +void testcrc32(void) +{ + uint j,k,l; + uint8 *buf; + uint len[CNBUFS]; + uint32 crcr; + uint32 crc32tv[CNBUFS] = + {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110}; + + ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL); + + /* step through all possible alignments */ + for (l=0;l<=4;l++) { + for (j=0; j +#include +#include +#include + +struct dma_info; /* forward declaration */ +#define di_t struct dma_info +#include + +/* debug/trace */ +#define DMA_ERROR(args) +#define DMA_TRACE(args) + +/* default dma message level(if input msg_level pointer is null in dma_attach()) */ +static uint dma_msg_level = 0; + +#define MAXNAMEL 8 +#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t)) + +/* dma engine software state */ +typedef struct dma_info { + hnddma_t hnddma; /* exported structure */ + uint *msg_level; /* message level pointer */ + + char name[MAXNAMEL]; /* callers name for diag msgs */ + void *drv; /* driver handle */ + void *dev; /* device handle */ + dmaregs_t *regs; /* dma engine registers */ + + dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */ + uint txin; /* index of next descriptor to reclaim */ + uint txout; /* index of next descriptor to post */ + uint txavail; /* # free tx descriptors */ + void *txp[MAXDD]; /* parallel array of pointers to packets */ + ulong txdpa; /* physical address of descriptor ring */ + uint txdalign; /* #bytes added to alloc'd mem to align txd */ + + dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */ + uint rxin; /* index of next descriptor to reclaim */ + uint rxout; /* index of next descriptor to post */ + void *rxp[MAXDD]; /* parallel array of pointers to packets */ + ulong rxdpa; /* physical address of descriptor ring */ + uint rxdalign; /* #bytes added to alloc'd mem to align rxd */ + + /* tunables */ + uint ntxd; /* # tx descriptors */ + uint nrxd; /* # rx descriptors */ + uint rxbufsize; /* rx buffer size in bytes */ + uint nrxpost; /* # rx buffers to keep posted */ + uint rxoffset; /* rxcontrol offset */ + uint ddoffset; /* add to get dma address of descriptor ring */ + uint dataoffset; /* add to get dma address of data buffer */ +} dma_info_t; + +/* descriptor bumping macros */ +#define TXD(x) ((x) & (di->ntxd - 1)) +#define RXD(x) ((x) & (di->nrxd - 1)) +#define NEXTTXD(i) TXD(i + 1) +#define PREVTXD(i) TXD(i - 1) +#define NEXTRXD(i) RXD(i + 1) +#define NTXDACTIVE(h, t) TXD(t - h) +#define NRXDACTIVE(h, t) RXD(t - h) + +/* macros to convert between byte offsets and indexes */ +#define B2I(bytes) ((bytes) / sizeof (dmadd_t)) +#define I2B(index) ((index) * sizeof (dmadd_t)) + +void* +dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd, + uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level) +{ + dma_info_t *di; + void *va; + + ASSERT(ntxd <= MAXDD); + ASSERT(nrxd <= MAXDD); + + /* allocate private info structure */ + if ((di = MALLOC(sizeof (dma_info_t))) == NULL) + return (NULL); + bzero((char*)di, sizeof (dma_info_t)); + + /* set message level */ + di->msg_level = msg_level ? msg_level : &dma_msg_level; + + DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset)); + + /* make a private copy of our callers name */ + strncpy(di->name, name, MAXNAMEL); + di->name[MAXNAMEL-1] = '\0'; + + di->drv = drv; + di->dev = dev; + di->regs = regs; + + /* allocate transmit descriptor ring */ + if (ntxd) { + if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL) + goto fail; + di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); + di->txdalign = ((uint)di->txd - (uint)va); + di->txdpa = di->txdpa + di->txdalign; + ASSERT(ISALIGNED(di->txd, DMARINGALIGN)); + } + + /* allocate receive descriptor ring */ + if (nrxd) { + if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL) + goto fail; + di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); + di->rxdalign = ((uint)di->rxd - (uint)va); + di->rxdpa = di->rxdpa + di->rxdalign; + ASSERT(ISALIGNED(di->rxd, DMARINGALIGN)); + } + + /* save tunables */ + di->ntxd = ntxd; + di->nrxd = nrxd; + di->rxbufsize = rxbufsize; + di->nrxpost = nrxpost; + di->rxoffset = rxoffset; + di->ddoffset = ddoffset; + di->dataoffset = dataoffset; + + return ((void*)di); + +fail: + dma_detach((void*)di); + return (NULL); +} + +/* may be called with core in reset */ +void +dma_detach(dma_info_t *di) +{ + if (di == NULL) + return; + + DMA_TRACE(("%s: dma_detach\n", di->name)); + + /* shouldn't be here if descriptors are unreclaimed */ + ASSERT(di->txin == di->txout); + ASSERT(di->rxin == di->rxout); + + /* free dma descriptor rings */ + if (di->txd) + DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa); + if (di->rxd) + DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa); + + /* free our private info structure */ + MFREE((void*)di, sizeof (dma_info_t)); +} + + +void +dma_txreset(dma_info_t *di) +{ + uint32 status; + + DMA_TRACE(("%s: dma_txreset\n", di->name)); + + /* suspend tx DMA first */ + W_REG(&di->regs->xmtcontrol, XC_SE); + SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED && + status != XS_XS_IDLE && + status != XS_XS_STOPPED, + 10000); + + W_REG(&di->regs->xmtcontrol, 0); + SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED, + 10000); + + if (status != XS_XS_DISABLED) { + DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); + } + + /* wait for the last transaction to complete */ + OSL_DELAY(300); +} + +void +dma_rxreset(dma_info_t *di) +{ + uint32 status; + + DMA_TRACE(("%s: dma_rxreset\n", di->name)); + + W_REG(&di->regs->rcvcontrol, 0); + SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED, + 10000); + + if (status != RS_RS_DISABLED) { + DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); + } +} + +void +dma_txinit(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_txinit\n", di->name)); + + di->txin = di->txout = 0; + di->txavail = di->ntxd - 1; + + /* clear tx descriptor ring */ + BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t))); + + W_REG(&di->regs->xmtcontrol, XC_XE); + W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset)); +} + +bool +dma_txenabled(dma_info_t *di) +{ + uint32 xc; + + /* If the chip is dead, it is not enabled :-) */ + xc = R_REG(&di->regs->xmtcontrol); + return ((xc != 0xffffffff) && (xc & XC_XE)); +} + +void +dma_txsuspend(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_txsuspend\n", di->name)); + OR_REG(&di->regs->xmtcontrol, XC_SE); +} + +void +dma_txresume(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_txresume\n", di->name)); + AND_REG(&di->regs->xmtcontrol, ~XC_SE); +} + +bool +dma_txsuspended(dma_info_t *di) +{ + if (!(R_REG(&di->regs->xmtcontrol) & XC_SE)) + return 0; + + if ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) != XS_XS_IDLE) + return 0; + + OSL_DELAY(2); + return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_IDLE); +} + +bool +dma_txstopped(dma_info_t *di) +{ + return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED); +} + +bool +dma_rxstopped(dma_info_t *di) +{ + return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED); +} + +void +dma_fifoloopbackenable(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name)); + OR_REG(&di->regs->xmtcontrol, XC_LE); +} + +void +dma_rxinit(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_rxinit\n", di->name)); + + di->rxin = di->rxout = 0; + + /* clear rx descriptor ring */ + BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t))); + + dma_rxenable(di); + W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset)); +} + +void +dma_rxenable(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_rxenable\n", di->name)); + W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE)); +} + +bool +dma_rxenabled(dma_info_t *di) +{ + uint32 rc; + + rc = R_REG(&di->regs->rcvcontrol); + return ((rc != 0xffffffff) && (rc & RC_RE)); +} + +/* + * The BCM47XX family supports full 32bit dma engine buffer addressing so + * dma buffers can cross 4 Kbyte page boundaries. + */ +int +dma_txfast(dma_info_t *di, void *p0, uint32 coreflags) +{ + void *p, *next; + uchar *data; + uint len; + uint txout; + uint32 ctrl; + uint32 pa; + + DMA_TRACE(("%s: dma_txfast\n", di->name)); + + txout = di->txout; + ctrl = 0; + + /* + * Walk the chain of packet buffers + * allocating and initializing transmit descriptor entries. + */ + for (p = p0; p; p = next) { + data = PKTDATA(di->drv, p); + len = PKTLEN(di->drv, p); + next = PKTNEXT(di->drv, p); + + /* return nonzero if out of tx descriptors */ + if (NEXTTXD(txout) == di->txin) + goto outoftxd; + + if (len == 0) + continue; + + /* get physical address of buffer start */ + pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p); + + /* build the descriptor control value */ + ctrl = len & CTRL_BC_MASK; + + ctrl |= coreflags; + + if (p == p0) + ctrl |= CTRL_SOF; + if (next == NULL) + ctrl |= (CTRL_IOC | CTRL_EOF); + if (txout == (di->ntxd - 1)) + ctrl |= CTRL_EOT; + + /* init the tx descriptor */ + W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); + W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); + + ASSERT(di->txp[txout] == NULL); + + txout = NEXTTXD(txout); + } + + /* if last txd eof not set, fix it */ + if (!(ctrl & CTRL_EOF)) + W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); + + /* save the packet */ + di->txp[PREVTXD(txout)] = p0; + + /* bump the tx descriptor index */ + di->txout = txout; + + /* kick the chip */ + W_REG(&di->regs->xmtptr, I2B(txout)); + + /* tx flow control */ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + return (0); + +outoftxd: + DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); + PKTFREE(di->drv, p0, TRUE); + di->txavail = 0; + di->hnddma.txnobuf++; + return (-1); +} + +#define PAGESZ 4096 +#define PAGEBASE(x) ((uint)(x) & ~4095) + +/* + * Just like above except go through the extra effort of splitting + * buffers that cross 4Kbyte boundaries into multiple tx descriptors. + */ +int +dma_tx(dma_info_t *di, void *p0, uint32 coreflags) +{ + void *p, *next; + uchar *data; + uint plen, len; + uchar *page, *start, *end; + uint txout; + uint32 ctrl; + uint32 pa; + + DMA_TRACE(("%s: dma_tx\n", di->name)); + + txout = di->txout; + ctrl = 0; + + /* + * Walk the chain of packet buffers + * splitting those that cross 4 Kbyte boundaries + * allocating and initializing transmit descriptor entries. + */ + for (p = p0; p; p = next) { + data = PKTDATA(di->drv, p); + plen = PKTLEN(di->drv, p); + next = PKTNEXT(di->drv, p); + + if (plen == 0) + continue; + + for (page = (uchar*)PAGEBASE(data); + page <= (uchar*)PAGEBASE(data + plen - 1); + page += PAGESZ) { + + /* return nonzero if out of tx descriptors */ + if (NEXTTXD(txout) == di->txin) + goto outoftxd; + + start = (page == (uchar*)PAGEBASE(data))? data: page; + end = (page == (uchar*)PAGEBASE(data + plen))? + (data + plen): (page + PAGESZ); + len = end - start; + + /* build the descriptor control value */ + ctrl = len & CTRL_BC_MASK; + + ctrl |= coreflags; + + if ((p == p0) && (start == data)) + ctrl |= CTRL_SOF; + if ((next == NULL) && (end == (data + plen))) + ctrl |= (CTRL_IOC | CTRL_EOF); + if (txout == (di->ntxd - 1)) + ctrl |= CTRL_EOT; + + /* get physical address of buffer start */ + pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p); + + /* init the tx descriptor */ + W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); + W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); + + ASSERT(di->txp[txout] == NULL); + + txout = NEXTTXD(txout); + } + } + + /* if last txd eof not set, fix it */ + if (!(ctrl & CTRL_EOF)) + W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); + + /* save the packet */ + di->txp[PREVTXD(txout)] = p0; + + /* bump the tx descriptor index */ + di->txout = txout; + + /* kick the chip */ + W_REG(&di->regs->xmtptr, I2B(txout)); + + /* tx flow control */ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + return (0); + +outoftxd: + DMA_ERROR(("%s: dma_tx: out of txds\n", di->name)); + PKTFREE(di->drv, p0, TRUE); + di->txavail = 0; + di->hnddma.txnobuf++; + return (-1); +} + +/* returns a pointer to the next frame received, or NULL if there are no more */ +void* +dma_rx(dma_info_t *di) +{ + void *p; + uint len; + int skiplen = 0; + + while ((p = dma_getnextrxp(di, FALSE))) { + /* skip giant packets which span multiple rx descriptors */ + if (skiplen > 0) { + skiplen -= di->rxbufsize; + if (skiplen < 0) + skiplen = 0; + PKTFREE(di->drv, p, FALSE); + continue; + } + + len = ltoh16(*(uint16*)(PKTDATA(di->drv, p))); + DMA_TRACE(("%s: dma_rx len %d\n", di->name, len)); + + /* bad frame length check */ + if (len > (di->rxbufsize - di->rxoffset)) { + DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len)); + if (len > 0) + skiplen = len - (di->rxbufsize - di->rxoffset); + PKTFREE(di->drv, p, FALSE); + di->hnddma.rxgiants++; + continue; + } + + /* set actual length */ + PKTSETLEN(di->drv, p, (di->rxoffset + len)); + + break; + } + + return (p); +} + +/* post receive buffers */ +void +dma_rxfill(dma_info_t *di) +{ + void *p; + uint rxin, rxout; + uint ctrl; + uint n; + uint i; + uint32 pa; + uint rxbufsize; + + /* + * Determine how many receive buffers we're lacking + * from the full complement, allocate, initialize, + * and post them, then update the chip rx lastdscr. + */ + + rxin = di->rxin; + rxout = di->rxout; + rxbufsize = di->rxbufsize; + + n = di->nrxpost - NRXDACTIVE(rxin, rxout); + + DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n)); + + for (i = 0; i < n; i++) { + if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) { + DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name)); + di->hnddma.rxnobuf++; + break; + } + + *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0; + + pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p); + ASSERT(ISALIGNED(pa, 4)); + + /* save the free packet pointer */ + ASSERT(di->rxp[rxout] == NULL); + di->rxp[rxout] = p; + + /* prep the descriptor control value */ + ctrl = rxbufsize; + if (rxout == (di->nrxd - 1)) + ctrl |= CTRL_EOT; + + /* init the rx descriptor */ + W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl)); + W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset)); + + rxout = NEXTRXD(rxout); + } + + di->rxout = rxout; + + /* update the chip lastdscr pointer */ + W_REG(&di->regs->rcvptr, I2B(rxout)); +} + +void +dma_txreclaim(dma_info_t *di, bool forceall) +{ + void *p; + + DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : "")); + + while ((p = dma_getnexttxp(di, forceall))) + PKTFREE(di->drv, p, TRUE); +} + +/* + * Reclaim next completed txd (txds if using chained buffers) and + * return associated packet. + * If 'force' is true, reclaim txd(s) and return associated packet + * regardless of the value of the hardware "curr" pointer. + */ +void* +dma_getnexttxp(dma_info_t *di, bool forceall) +{ + uint start, end, i; + void *txp; + + DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); + + txp = NULL; + + start = di->txin; + if (forceall) + end = di->txout; + else + end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); + + if ((start == 0) && (end > di->txout)) + goto bogus; + + for (i = start; i != end && !txp; i = NEXTTXD(i)) { + DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset), + (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]); + W_SM(&di->txd[i].addr, 0xdeadbeef); + txp = di->txp[i]; + di->txp[i] = NULL; + } + + di->txin = i; + + /* tx flow control */ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + return (txp); + +bogus: +/* + DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", + start, end, di->txout, forceall)); +*/ + return (NULL); +} + +/* like getnexttxp but no reclaim */ +void* +dma_peeknexttxp(dma_info_t *di) +{ + uint end, i; + + end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); + + for (i = di->txin; i != end; i = NEXTTXD(i)) + if (di->txp[i]) + return (di->txp[i]); + + return (NULL); +} + +void +dma_rxreclaim(dma_info_t *di) +{ + void *p; + + DMA_TRACE(("%s: dma_rxreclaim\n", di->name)); + + while ((p = dma_getnextrxp(di, TRUE))) + PKTFREE(di->drv, p, FALSE); +} + +void * +dma_getnextrxp(dma_info_t *di, bool forceall) +{ + uint i; + void *rxp; + + /* if forcing, dma engine must be disabled */ + ASSERT(!forceall || !dma_rxenabled(di)); + + i = di->rxin; + + /* return if no packets posted */ + if (i == di->rxout) + return (NULL); + + /* ignore curr if forceall */ + if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK))) + return (NULL); + + /* get the packet pointer that corresponds to the rx descriptor */ + rxp = di->rxp[i]; + ASSERT(rxp); + di->rxp[i] = NULL; + + /* clear this packet from the descriptor ring */ + DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset), + di->rxbufsize, DMA_RX, rxp); + W_SM(&di->rxd[i].addr, 0xdeadbeef); + + di->rxin = NEXTRXD(i); + + return (rxp); +} + +char* +dma_dumptx(dma_info_t *di, char *buf) +{ + buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n", + (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail); + buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n", + R_REG(&di->regs->xmtcontrol), + R_REG(&di->regs->xmtaddr), + R_REG(&di->regs->xmtptr), + R_REG(&di->regs->xmtstatus)); + return (buf); +} + +char* +dma_dumprx(dma_info_t *di, char *buf) +{ + buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n", + (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout); + buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n", + R_REG(&di->regs->rcvcontrol), + R_REG(&di->regs->rcvaddr), + R_REG(&di->regs->rcvptr), + R_REG(&di->regs->rcvstatus)); + return (buf); +} + +char* +dma_dump(dma_info_t *di, char *buf) +{ + buf = dma_dumptx(di, buf); + buf = dma_dumprx(di, buf); + return (buf); +} + +uint +dma_getvar(dma_info_t *di, char *name) +{ + if (!strcmp(name, "&txavail")) + return ((uint) &di->txavail); + else { + ASSERT(0); + } + return (0); +} + +void +dma_txblock(dma_info_t *di) +{ + di->txavail = 0; +} + +void +dma_txunblock(dma_info_t *di) +{ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; +} + +uint +dma_txactive(dma_info_t *di) +{ + return (NTXDACTIVE(di->txin, di->txout)); +} + +/* + * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin). + */ +void +dma_txrotate(di_t *di) +{ + uint ad; + uint nactive; + uint rot; + uint old, new; + uint32 w; + uint first, last; + + ASSERT(dma_txsuspended(di)); + + nactive = dma_txactive(di); + ad = B2I((R_REG(&di->regs->xmtstatus) & XS_AD_MASK) >> XS_AD_SHIFT); + rot = TXD(ad - di->txin); + + ASSERT(rot < di->ntxd); + + /* full-ring case is a lot harder - don't worry about this */ + if (rot >= (di->ntxd - nactive)) { + DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name)); + return; + } + + first = di->txin; + last = PREVTXD(di->txout); + + /* move entries starting at last and moving backwards to first */ + for (old = last; old != PREVTXD(first); old = PREVTXD(old)) { + new = TXD(old + rot); + + /* + * Move the tx dma descriptor. + * EOT is set only in the last entry in the ring. + */ + w = R_SM(&di->txd[old].ctrl) & ~CTRL_EOT; + if (new == (di->ntxd - 1)) + w |= CTRL_EOT; + W_SM(&di->txd[new].ctrl, w); + W_SM(&di->txd[new].addr, R_SM(&di->txd[old].addr)); + + /* zap the old tx dma descriptor address field */ + W_SM(&di->txd[old].addr, 0xdeadbeef); + + /* move the corresponding txp[] entry */ + ASSERT(di->txp[new] == NULL); + di->txp[new] = di->txp[old]; + di->txp[old] = NULL; + } + + /* update txin and txout */ + di->txin = ad; + di->txout = TXD(di->txout + rot); + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + /* kick the chip */ + W_REG(&di->regs->xmtptr, I2B(di->txout)); +} diff --git a/package/linux/kernel-source/drivers/net/hnd/linux_osl.c b/package/linux/kernel-source/drivers/net/hnd/linux_osl.c new file mode 100644 index 0000000000..575b046fbe --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/linux_osl.c @@ -0,0 +1,465 @@ +/* + * Linux OS Independent Layer + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#define LINUX_OSL + +#include +#include +#include +#include +#include +#include +#ifdef mips +#include +#endif +#include + +#define PCI_CFG_RETRY 10 + +void* +osl_pktget(void *drv, uint len, bool send) +{ + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(len)) == NULL) + return (NULL); + + skb_put(skb, len); + + /* ensure the cookie field is cleared */ + PKTSETCOOKIE(skb, NULL); + + return ((void*) skb); +} + +void +osl_pktfree(void *p) +{ + struct sk_buff *skb, *nskb; + + skb = (struct sk_buff*) p; + + /* perversion: we use skb->next to chain multi-skb packets */ + while (skb) { + nskb = skb->next; + skb->next = NULL; + if (skb->destructor) { + /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */ + dev_kfree_skb_any(skb); + } else { + /* can free immediately (even in_irq()) if destructor does not exist */ + dev_kfree_skb(skb); + } + skb = nskb; + } +} + +uint32 +osl_pci_read_config(void *loc, uint offset, uint size) +{ + struct pci_dev *pdev; + uint val; + uint retry=PCI_CFG_RETRY; + + /* only 4byte access supported */ + ASSERT(size == 4); + + pdev = (struct pci_dev*)loc; + do { + pci_read_config_dword(pdev, offset, &val); + if (val != 0xffffffff) + break; + } while (retry--); + + + return (val); +} + +void +osl_pci_write_config(void *loc, uint offset, uint size, uint val) +{ + struct pci_dev *pdev; + uint retry=PCI_CFG_RETRY; + + /* only 4byte access supported */ + ASSERT(size == 4); + + pdev = (struct pci_dev*)loc; + + do { + pci_write_config_dword(pdev, offset, val); + if (offset!=PCI_BAR0_WIN) + break; + if (osl_pci_read_config(loc,offset,size) == val) + break; + } while (retry--); + +} + +static void +osl_pcmcia_attr(void *osh, uint offset, char *buf, int size, bool write) +{ +} + +void +osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size) +{ + osl_pcmcia_attr(osh, offset, (char *) buf, size, FALSE); +} + +void +osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size) +{ + osl_pcmcia_attr(osh, offset, (char *) buf, size, TRUE); +} + +#if defined(BINOSL) + +void +osl_assert(char *exp, char *file, int line) +{ + char tempbuf[255]; + + sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line); + panic(tempbuf); +} + + + +void* +osl_malloc(uint size) +{ + return (kmalloc(size, GFP_ATOMIC)); +} + +void +osl_mfree(void *addr, uint size) +{ + kfree(addr); +} + +uint +osl_malloced(void) +{ +#ifdef MODULE + return malloced; +#else + return 0; +#endif +} + +#endif /* defined(BCMDBG) || defined(BINOSL) */ + +/* + * BINOSL selects the slightly slower function-call-based binary compatible osl. + */ +#ifdef BINOSL + +int +osl_printf(const char *format, ...) +{ + va_list args; + char buf[1024]; + int len; + + /* sprintf into a local buffer because there *is* no "vprintk()".. */ + va_start(args, format); + len = vsprintf(buf, format, args); + va_end(args); + + if (len > sizeof (buf)) { + printk("osl_printf: buffer overrun\n"); + return (0); + } + + return (printk(buf)); +} + +int +osl_sprintf(char *buf, const char *format, ...) +{ + va_list args; + int rc; + + va_start(args, format); + rc = vsprintf(buf, format, args); + va_end(args); + return (rc); +} + +int +osl_strcmp(const char *s1, const char *s2) +{ + return (strcmp(s1, s2)); +} + +int +osl_strncmp(const char *s1, const char *s2, uint n) +{ + return (strncmp(s1, s2, n)); +} + +int +osl_strlen(char *s) +{ + return (strlen(s)); +} + +char* +osl_strcpy(char *d, const char *s) +{ + return (strcpy(d, s)); +} + +char* +osl_strncpy(char *d, const char *s, uint n) +{ + return (strncpy(d, s, n)); +} + +void +bcopy(const void *src, void *dst, int len) +{ + memcpy(dst, src, len); +} + +int +bcmp(const void *b1, const void *b2, int len) +{ + return (memcmp(b1, b2, len)); +} + +void +bzero(void *b, int len) +{ + memset(b, '\0', len); +} + +uint32 +osl_readl(volatile uint32 *r) +{ + return (readl(r)); +} + +uint16 +osl_readw(volatile uint16 *r) +{ + return (readw(r)); +} + +uint8 +osl_readb(volatile uint8 *r) +{ + return (readb(r)); +} + +void +osl_writel(uint32 v, volatile uint32 *r) +{ + writel(v, r); +} + +void +osl_writew(uint16 v, volatile uint16 *r) +{ + writew(v, r); +} + +void +osl_writeb(uint8 v, volatile uint8 *r) +{ + writeb(v, r); +} + +void * +osl_uncached(void *va) +{ +#ifdef mips + return ((void*)KSEG1ADDR(va)); +#else + return ((void*)va); +#endif +} + +uint +osl_getcycles(void) +{ + uint cycles; + +#if defined(mips) + cycles = read_c0_count() * 2; +#elif defined(__i386__) + rdtscl(cycles); +#else + cycles = 0; +#endif + return cycles; +} + +void * +osl_reg_map(uint32 pa, uint size) +{ + return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); +} + +void +osl_reg_unmap(void *va) +{ + iounmap(va); +} + +int +osl_busprobe(uint32 *val, uint32 addr) +{ +#ifdef mips + return get_dbe(*val, (uint32*)addr); +#else + *val = readl(addr); + return 0; +#endif +} + +void* +osl_dma_alloc_consistent(void *dev, uint size, ulong *pap) +{ + return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap)); +} + +void +osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa) +{ + pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa); +} + +uint +osl_dma_map(void *dev, void *va, uint size, int direction) +{ + int dir; + + dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; + return (pci_map_single(dev, va, size, dir)); +} + +void +osl_dma_unmap(void *dev, uint pa, uint size, int direction) +{ + int dir; + + dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; + pci_unmap_single(dev, (uint32)pa, size, dir); +} + +void +osl_delay(uint usec) +{ + udelay(usec); +} + +uchar* +osl_pktdata(void *drv, void *skb) +{ + return (((struct sk_buff*)skb)->data); +} + +uint +osl_pktlen(void *drv, void *skb) +{ + return (((struct sk_buff*)skb)->len); +} + +uint +osl_pktheadroom(void *drv, void *skb) +{ + return (uint) skb_headroom((struct sk_buff *) skb); +} + +uint +osl_pkttailroom(void *drv, void *skb) +{ + return (uint) skb_tailroom((struct sk_buff *) skb); +} + +void* +osl_pktnext(void *drv, void *skb) +{ + return (((struct sk_buff*)skb)->next); +} + +void +osl_pktsetnext(void *skb, void *x) +{ + ((struct sk_buff*)skb)->next = (struct sk_buff*)x; +} + +void +osl_pktsetlen(void *drv, void *skb, uint len) +{ + __skb_trim((struct sk_buff*)skb, len); +} + +uchar* +osl_pktpush(void *drv, void *skb, int bytes) +{ + return (skb_push((struct sk_buff*)skb, bytes)); +} + +uchar* +osl_pktpull(void *drv, void *skb, int bytes) +{ + return (skb_pull((struct sk_buff*)skb, bytes)); +} + +void* +osl_pktdup(void *drv, void *skb) +{ + return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC)); +} + +void* +osl_pktcookie(void *skb) +{ + return ((void*)((struct sk_buff*)skb)->csum); +} + +void +osl_pktsetcookie(void *skb, void *x) +{ + ((struct sk_buff*)skb)->csum = (uint)x; +} + +void* +osl_pktlink(void *skb) +{ + return (((struct sk_buff*)skb)->prev); +} + +void +osl_pktsetlink(void *skb, void *x) +{ + ((struct sk_buff*)skb)->prev = (struct sk_buff*)x; +} + +uint +osl_pktprio(void *skb) +{ + return (((struct sk_buff*)skb)->priority); +} + +void +osl_pktsetprio(void *skb, uint x) +{ + ((struct sk_buff*)skb)->priority = x; +} + +#endif /* BINOSL */ diff --git a/package/linux/kernel-source/drivers/net/hnd/sbutils.c b/package/linux/kernel-source/drivers/net/hnd/sbutils.c new file mode 100644 index 0000000000..50ec33986d --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/sbutils.c @@ -0,0 +1,2164 @@ +/* + * Misc utility routines for accessing chip-specific features + * of the SiliconBackplane-based Broadcom chips. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* debug/trace */ +#define SB_ERROR(args) + +typedef uint32 (*sb_intrsoff_t)(void *intr_arg); +typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); +typedef bool (*sb_intrsenabled_t)(void *intr_arg); + +/* misc sb info needed by some of the routines */ +typedef struct sb_info { + uint chip; /* chip number */ + uint chiprev; /* chip revision */ + uint chippkg; /* chip package option */ + uint boardtype; /* board type */ + uint boardvendor; /* board vendor id */ + uint bus; /* what bus type we are going through */ + + void *osh; /* osl os handle */ + void *sdh; /* bcmsdh handle */ + + void *curmap; /* current regs va */ + void *regs[SB_MAXCORES]; /* other regs va */ + + uint curidx; /* current core index */ + uint dev_coreid; /* the core provides driver functions */ + uint pciidx; /* pci core index */ + uint pcirev; /* pci core rev */ + + uint pcmciaidx; /* pcmcia core index */ + uint pcmciarev; /* pcmcia core rev */ + bool memseg; /* flag to toggle MEM_SEG register */ + + uint ccrev; /* chipc core rev */ + + uint gpioidx; /* gpio control core index */ + uint gpioid; /* gpio control coretype */ + + uint numcores; /* # discovered cores */ + uint coreid[SB_MAXCORES]; /* id of each core */ + + void *intr_arg; /* interrupt callback function arg */ + sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ + sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ + sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */ +} sb_info_t; + +/* local prototypes */ +static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); +static void sb_scan(sb_info_t *si); +static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val); +static uint _sb_coreidx(void *sbh); +static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit); +static uint sb_pcidev2chip(uint pcidev); +static uint sb_chip2numcores(uint chip); + +#define SB_INFO(sbh) (sb_info_t*)sbh +#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) +#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE)) +#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE)) +#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF) +#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) +#define BADIDX (SB_MAXCORES+1) + +#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) +#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) +#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) +#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) + +/* + * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ + * after core switching to avoid invalid register accesss inside ISR. + */ +#define INTR_OFF(si, intr_val) \ + if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ + intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } +#define INTR_RESTORE(si, intr_val) \ + if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ + (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } + +/* power control defines */ +#define LPOMINFREQ 25000 /* low power oscillator min */ +#define LPOMAXFREQ 43000 /* low power oscillator max */ +#define XTALMINFREQ 19800000 /* 20mhz - 1% */ +#define XTALMAXFREQ 20200000 /* 20mhz + 1% */ +#define PCIMINFREQ 25000000 /* 25mhz */ +#define PCIMAXFREQ 34000000 /* 33mhz + fudge */ +#define SCC_DEF_DIV 0 /* default slow clock divider */ + +#define XTAL_ON_DELAY 1000 /* Xtal power on delay in us */ + +#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */ + + +static uint32 +sb_read_sbreg(void *sbh, volatile uint32 *sbr) +{ + sb_info_t *si; + uint8 tmp; + uint32 val, intr_val = 0; + + si = SB_INFO(sbh); + + /* + * compact flash only has 11 bits address, while we needs 12 bits address. + * MEM_SEG will be OR'd with other 11 bits address in hardware, + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ + if(si->memseg) { + INTR_OFF(si, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/ + } + + val = R_REG(sbr); + + if(si->memseg) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(si, intr_val); + } + + return (val); +} + +static void +sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v) +{ + sb_info_t *si; + uint8 tmp; + volatile uint32 dummy; + uint32 intr_val = 0; + + si = SB_INFO(sbh); + + /* + * compact flash only has 11 bits address, while we needs 12 bits address. + * MEM_SEG will be OR'd with other 11 bits address in hardware, + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ + if(si->memseg) { + INTR_OFF(si, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */ + } + + if (si->bus == PCMCIA_BUS) { +#ifdef IL_BIGENDIAN + dummy = R_REG(sbr); + W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); + dummy = R_REG(sbr); + W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); +#else + dummy = R_REG(sbr); + W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); + dummy = R_REG(sbr); + W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); +#endif + } else + W_REG(sbr, v); + + if(si->memseg) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(si, intr_val); + } +} + +/* + * Allocate a sb handle. + * devid - pci device id (used to determine chip#) + * osh - opaque OS handle + * regs - virtual address of initial core registers + * bustype - pci/pcmcia/sb/sdio/etc + * vars - pointer to a pointer area for "environment" variables + * varsz - pointer to int to return the size of the vars + */ +void* +sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) +{ + sb_info_t *si; + + /* alloc sb_info_t */ + if ((si = MALLOC(sizeof (sb_info_t))) == NULL) { + SB_ERROR(("sb_attach: malloc failed!\n")); + return (NULL); + } + + return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz)); +} + +/* global kernel resource */ +static sb_info_t ksi; + +/* generic kernel variant of sb_attach() */ +void* +sb_kattach() +{ + uint32 *regs; + char *unused; + int varsz; + + if (ksi.curmap == NULL) { + uint32 cid; + + regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); + cid = R_REG((uint32 *)regs); + if (((cid & CID_ID_MASK) == 0x4712) && + ((cid & CID_REV_MASK) <= 0x00020000)) { + uint32 *scc, val; + + scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); + val = R_REG(scc); + SB_ERROR((" initial scc = 0x%x\n", val)); + val |= SCC_SS_XTAL; + W_REG(scc, val); + } + + sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, + SB_BUS, NULL, &unused, &varsz); + } + + return &ksi; +} + +static void* +sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) +{ + uint origidx; + chipcregs_t *cc; + uint32 w; + + ASSERT(GOODREGS(regs)); + + bzero((uchar*)si, sizeof (sb_info_t)); + + si->pciidx = si->gpioidx = BADIDX; + + si->osh = osh; + si->curmap = regs; + si->sdh = sdh; + + /* check to see if we are a sb core mimic'ing a pci core */ + if (bustype == PCI_BUS) { + if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) + bustype = SB_BUS; + else + bustype = PCI_BUS; + } + + si->bus = bustype; + + if (si->bus == PCMCIA_BUS) + /* need to set memseg flag for CF card first before any sb registers access, + * such as the access inside sb_scan. the card type is detected and memseg + * flag is reassigned later after srom_var_init. there should be no effect + * for PCMCIA cards even though the memseg flag is set + */ + si->memseg = TRUE; + + /* kludge to enable the clock on the 4306 which lacks a slowclock */ + if (si->bus == PCI_BUS) + sb_pwrctl_xtal((void*)si, XTAL|PLL, ON); + + /* initialize current core index value */ + si->curidx = _sb_coreidx((void*)si); + if (si->curidx == BADIDX) + goto bad; + + /* keep and reuse the initial register mapping */ + origidx = si->curidx; + if (si->bus == SB_BUS) + si->regs[origidx] = regs; + + /* is core-0 a chipcommon core? */ + si->numcores = 1; + cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0); + if (sb_coreid((void*)si) != SB_CC) + cc = NULL; + + /* determine chip id and rev */ + if (cc) { + /* chip common core found! */ + si->chip = R_REG(&cc->chipid) & CID_ID_MASK; + si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; + si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; + } else { + /* The only pcmcia chip without a chipcommon core is a 4301 */ + if (si->bus == PCMCIA_BUS) + devid = BCM4301_DEVICE_ID; + + /* no chip common core -- must convert device id to chip id */ + if ((si->chip = sb_pcidev2chip(devid)) == 0) { + SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid)); + goto bad; + } + } + + /* get chipcommon rev */ + si->ccrev = cc? sb_corerev((void*)si) : 0; + + /* determine numcores */ + if ((si->ccrev == 4) || (si->ccrev >= 6)) + si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; + else + si->numcores = sb_chip2numcores(si->chip); + + /* return to original core */ + sb_setcoreidx((void*)si, origidx); + + /* sanity checks */ + ASSERT(si->chip); + + /* scan for cores */ + sb_scan(si); + + /* initialize the vars after sb_scan so that the core rev. information + * collected by sb_scan is available for the srom_var_init. + */ + if (srom_var_init(si, si->bus, si->curmap, osh, vars, varsz)) { + SB_ERROR(("sb_attach: srom_var_init failed\n")); + goto bad; + } + + if (cc == NULL) { + /* + * The chip revision number is hardwired into all + * of the pci function config rev fields and is + * independent from the individual core revision numbers. + * For example, the "A0" silicon of each chip is chip rev 0. + * For PCMCIA we get it from the CIS instead. + */ + if (si->bus == PCMCIA_BUS) { + ASSERT(vars); + si->chiprev = getintvar(*vars, "chiprev"); + } else if (si->bus == PCI_BUS) { + w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); + si->chiprev = w & 0xff; + } else + si->chiprev = 0; + } + + if (si->bus == PCMCIA_BUS) { + w = getintvar(*vars, "regwindowsz"); + si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE; + } + + /* pci core is required */ + if (!GOODIDX(si->pciidx)) { + SB_ERROR(("sb_attach: pci core not found\n")); + goto bad; + } + + /* gpio control core is required */ + if (!GOODIDX(si->gpioidx)) { + SB_ERROR(("sb_attach: gpio control core not found\n")); + goto bad; + } + + /* get boardtype and boardrev */ + switch (si->bus) { + case PCI_BUS: + /* do a pci config read to get subsystem id and subvendor id */ + w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); + si->boardvendor = w & 0xffff; + si->boardtype = (w >> 16) & 0xffff; + break; + + case PCMCIA_BUS: + case SDIO_BUS: + si->boardvendor = getintvar(*vars, "manfid"); + si->boardtype = getintvar(*vars, "prodid"); + break; + + case SB_BUS: + si->boardvendor = VENDOR_BROADCOM; + si->boardtype = 0xffff; + break; + } + + if (si->boardtype == 0) { + SB_ERROR(("sb_attach: unknown board type\n")); + ASSERT(si->boardtype); + } + + /* clear any previous epidiag-induced target abort */ + sb_taclear((void*)si); + + return ((void*)si); + +bad: + MFREE(si, sizeof (sb_info_t)); + return (NULL); +} + +uint +sb_coreid(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); +} + +uint +sb_coreidx(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->curidx); +} + +/* return current index of core */ +static uint +_sb_coreidx(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + uint32 sbaddr = 0; + + si = SB_INFO(sbh); + ASSERT(si); + + switch (si->bus) { + case SB_BUS: + sb = REGS2SB(si->curmap); + sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0)); + break; + + case PCI_BUS: + sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); + break; + + case PCMCIA_BUS: { + uint8 tmp; + + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); + sbaddr = (uint)tmp << 12; + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); + sbaddr |= (uint)tmp << 16; + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); + sbaddr |= (uint)tmp << 24; + break; + } + default: + ASSERT(0); + } + + if (!GOODCOREADDR(sbaddr)) + return BADIDX; + + return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE); +} + +uint +sb_corevendor(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); +} + +uint +sb_corerev(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK); +} + +#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) + +/* set/clear sbtmstatelow core-specific flags */ +uint32 +sb_coreflags(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + sbconfig_t *sb; + uint32 w; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + ASSERT((val & ~mask) == 0); + ASSERT((mask & ~SBTML_ALLOW) == 0); + + /* mask and set */ + if (mask || val) { + w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val; + W_SBREG(sbh, &sb->sbtmstatelow, w); + } + + /* return the new value */ + return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW); +} + +/* set/clear sbtmstatehigh core-specific flags */ +uint32 +sb_coreflagshi(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + sbconfig_t *sb; + uint32 w; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + ASSERT((val & ~mask) == 0); + ASSERT((mask & ~SBTMH_FL_MASK) == 0); + + /* mask and set */ + if (mask || val) { + w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val; + W_SBREG(sbh, &sb->sbtmstatehigh, w); + } + + /* return the new value */ + return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK); +} + +bool +sb_iscoreup(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK); +} + +/* + * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, + * switch back to the original core, and return the new value. + */ +static uint +sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val) +{ + sb_info_t *si; + uint origidx; + uint32 *r; + uint w; + uint intr_val = 0; + + ASSERT(GOODIDX(coreidx)); + ASSERT(regoff < SB_CORE_SIZE); + ASSERT((val & ~mask) == 0); + + si = SB_INFO(sbh); + + INTR_OFF(si, intr_val); + + /* save current core index */ + origidx = sb_coreidx(sbh); + + /* switch core */ + r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff); + + /* mask and set */ + if (mask || val) { + if (regoff >= SBCONFIGOFF) { + w = (R_SBREG(sbh, r) & ~mask) | val; + W_SBREG(sbh, r, w); + } else { + w = (R_REG(r) & ~mask) | val; + W_REG(r, w); + } + } + + /* readback */ + if (regoff >= SBCONFIGOFF) + w = R_SBREG(sbh, r); + else + w = R_REG(r); + + /* restore core index */ + if (origidx != coreidx) + sb_setcoreidx(sbh, origidx); + + INTR_RESTORE(si, intr_val); + return (w); +} + +/* scan the sb enumerated space to identify all cores */ +static void +sb_scan(sb_info_t *si) +{ + void *sbh; + uint origidx; + uint i; + + sbh = (void*) si; + + /* numcores should already be set */ + ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); + + /* save current core index */ + origidx = sb_coreidx(sbh); + + si->pciidx = si->gpioidx = BADIDX; + + for (i = 0; i < si->numcores; i++) { + sb_setcoreidx(sbh, i); + si->coreid[i] = sb_coreid(sbh); + + if (si->coreid[i] == SB_PCI) { + si->pciidx = i; + si->pcirev = sb_corerev(sbh); + + } else if (si->coreid[i] == SB_PCMCIA) { + si->pcmciaidx = i; + si->pcmciarev = sb_corerev(sbh); + } + } + + /* + * Find the gpio "controlling core" type and index. + * Precedence: + * - if there's a chip common core - use that + * - else if there's a pci core (rev >= 2) - use that + * - else there had better be an extif core (4710 only) + */ + if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) { + si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0); + si->gpioid = SB_CC; + } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) { + si->gpioidx = si->pciidx; + si->gpioid = SB_PCI; + } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) { + si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0); + si->gpioid = SB_EXTIF; + } + + /* return to original core index */ + sb_setcoreidx(sbh, origidx); +} + +/* may be called with core in reset */ +void +sb_detach(void *sbh) +{ + sb_info_t *si; + uint idx; + + si = SB_INFO(sbh); + + if (si == NULL) + return; + + if (si->bus == SB_BUS) + for (idx = 0; idx < SB_MAXCORES; idx++) + if (si->regs[idx]) { + REG_UNMAP(si->regs[idx]); + si->regs[idx] = NULL; + } + + MFREE(si, sizeof (sb_info_t)); +} + +/* use pci dev id to determine chip id for chips not having a chipcommon core */ +static uint +sb_pcidev2chip(uint pcidev) +{ + if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) + return (BCM4710_DEVICE_ID); + if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID)) + return (BCM4610_DEVICE_ID); + if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) + return (BCM4402_DEVICE_ID); + if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) + return (BCM4307_DEVICE_ID); + if (pcidev == BCM4301_DEVICE_ID) + return (BCM4301_DEVICE_ID); + + return (0); +} + +/* convert chip number to number of i/o cores */ +static uint +sb_chip2numcores(uint chip) +{ + if (chip == 0x4710) + return (9); + if (chip == 0x4610) + return (9); + if (chip == 0x4402) + return (3); + if ((chip == 0x4307) || (chip == 0x4301)) + return (5); + if (chip == 0x4310) + return (8); + if (chip == 0x4306) /* < 4306c0 */ + return (6); + if (chip == 0x4704) + return (9); + if (chip == 0x5365) + return (7); + + SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); + ASSERT(0); + return (1); +} + +/* return index of coreid or BADIDX if not found */ +static uint +sb_findcoreidx(void *sbh, uint coreid, uint coreunit) +{ + sb_info_t *si; + uint found; + uint i; + + si = SB_INFO(sbh); + found = 0; + + for (i = 0; i < si->numcores; i++) + if (si->coreid[i] == coreid) { + if (found == coreunit) + return (i); + found++; + } + + return (BADIDX); +} + +/* + * this function changes logical "focus" to the indiciated core, + * must be called with interrupt off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ +void* +sb_setcoreidx(void *sbh, uint coreidx) +{ + sb_info_t *si; + uint32 sbaddr; + uint8 tmp; + + si = SB_INFO(sbh); + + if (coreidx >= si->numcores) + return (NULL); + + /* + * If the user has provided an interrupt mask enabled function, + * then assert interrupts are disabled before switching the core. + */ + ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg)); + + sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); + + switch (si->bus) { + case SB_BUS: + /* map new one */ + if (!si->regs[coreidx]) { + si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); + ASSERT(GOODREGS(si->regs[coreidx])); + } + si->curmap = si->regs[coreidx]; + break; + + case PCI_BUS: + /* point bar0 window */ + OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); + break; + + case PCMCIA_BUS: + tmp = (sbaddr >> 12) & 0x0f; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); + tmp = (sbaddr >> 16) & 0xff; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); + tmp = (sbaddr >> 24) & 0xff; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); + break; + } + + si->curidx = coreidx; + + return (si->curmap); +} + +/* + * this function changes logical "focus" to the indiciated core, + * must be called with interrupt off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ +void* +sb_setcore(void *sbh, uint coreid, uint coreunit) +{ + sb_info_t *si; + uint idx; + + si = SB_INFO(sbh); + + idx = sb_findcoreidx(sbh, coreid, coreunit); + if (!GOODIDX(idx)) + return (NULL); + + return (sb_setcoreidx(sbh, idx)); +} + +/* return chip number */ +uint +sb_chip(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->chip); +} + +/* return chip revision number */ +uint +sb_chiprev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->chiprev); +} + +/* return chip common revision number */ +uint +sb_chipcrev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->ccrev); +} + +/* return chip package option */ +uint +sb_chippkg(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->chippkg); +} + +/* return PCI core rev. */ +uint +sb_pcirev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->pcirev); +} + +/* return PCMCIA core rev. */ +uint +sb_pcmciarev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->pcmciarev); +} + +/* return board vendor id */ +uint +sb_boardvendor(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->boardvendor); +} + +/* return boardtype */ +uint +sb_boardtype(void *sbh) +{ + sb_info_t *si; + char *var; + + si = SB_INFO(sbh); + + if (si->bus == SB_BUS && si->boardtype == 0xffff) { + /* boardtype format is a hex string */ + si->boardtype = getintvar(NULL, "boardtype"); + + /* backward compatibility for older boardtype string format */ + if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) { + if (!strcmp(var, "bcm94710dev")) + si->boardtype = BCM94710D_BOARD; + else if (!strcmp(var, "bcm94710ap")) + si->boardtype = BCM94710AP_BOARD; + else if (!strcmp(var, "bcm94310u")) + si->boardtype = BCM94310U_BOARD; + else if (!strcmp(var, "bu4711")) + si->boardtype = BU4711_BOARD; + else if (!strcmp(var, "bu4710")) + si->boardtype = BU4710_BOARD; + else if (!strcmp(var, "bcm94702mn")) + si->boardtype = BCM94702MN_BOARD; + else if (!strcmp(var, "bcm94710r1")) + si->boardtype = BCM94710R1_BOARD; + else if (!strcmp(var, "bcm94710r4")) + si->boardtype = BCM94710R4_BOARD; + else if (!strcmp(var, "bcm94702cpci")) + si->boardtype = BCM94702CPCI_BOARD; + else if (!strcmp(var, "bcm95380_rr")) + si->boardtype = BCM95380RR_BOARD; + } + } + + return (si->boardtype); +} + +/* return board bus style */ +uint +sb_boardstyle(void *sbh) +{ + sb_info_t *si; + uint16 w; + + si = SB_INFO(sbh); + + if (si->bus == PCMCIA_BUS) + return (BOARDSTYLE_PCMCIA); + + if (si->bus == SB_BUS) + return (BOARDSTYLE_SOC); + + /* bus is PCI */ + + if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0) + return (BOARDSTYLE_CARDBUS); + + if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) && + (w == 0x0313)) + return (BOARDSTYLE_CARDBUS); + + return (BOARDSTYLE_PCI); +} + +/* return boolean if sbh device is in pci hostmode or client mode */ +uint +sb_bus(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->bus); +} + +/* return list of found cores */ +uint +sb_corelist(void *sbh, uint coreid[]) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + + bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); + return (si->numcores); +} + +/* return current register mapping */ +void * +sb_coreregs(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + ASSERT(GOODREGS(si->curmap)); + + return (si->curmap); +} + +/* traverse all cores to find and clear source of serror */ +static void +sb_serr_clear(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + uint origidx; + uint i, intr_val = 0; + void * corereg = NULL; + + si = SB_INFO(sbh); + + INTR_OFF(si, intr_val); + origidx = sb_coreidx(sbh); + + for (i = 0; i < si->numcores; i++) { + corereg = sb_setcoreidx(sbh, i); + if (NULL != corereg) { + sb = REGS2SB(corereg); + if ((si->chip == BCM4317_DEVICE_ID) && (si->chiprev == 0)) { + W_SBREG(sbh, &sb->sbtmstatehigh, 0); + } else { + if ((R_SBREG(sbh, &sb->sbtmstatehigh)) & SBTMH_SERR) { + AND_SBREG(sbh, &sb->sbtmstatehigh, ~SBTMH_SERR); + SB_ERROR(("sb_serr_clear: SError at core 0x%x\n", sb_coreid(sbh))); + } + } + } + } + + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); +} + +/* check if any inband, outband or timeout errors has happened and clear them */ +/* !! must be called with chip clk on */ +bool +sb_taclear(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + uint origidx; + uint intr_val = 0; + bool rc = FALSE; + uint32 inband = 0, serror = 0, timeout = 0; + void *corereg = NULL; + volatile uint32 imstate, tmstate; + + si = SB_INFO(sbh); + + if (si->bus == PCI_BUS) { + volatile uint32 stcmd; + + /* inband error is Target abort for PCI */ + stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32)); + inband = stcmd & PCI_CFG_CMD_STAT_TA; + if (inband) + OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32), stcmd); + + /* serror */ + stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32)); + serror = stcmd & PCI_SBIM_STATUS_SERR; + if (serror) { + sb_serr_clear(sbh); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32), stcmd); + } + + /* timeout */ + imstate = sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), 0, 0); + if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) { + sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), ~0, + (imstate & ~(SBIM_IBE | SBIM_TO))); + /* inband = imstate & SBIM_IBE; same as TA above */ + timeout = imstate & SBIM_TO; + } + + } else if (si->bus == PCMCIA_BUS) { + + INTR_OFF(si, intr_val); + origidx = sb_coreidx(sbh); + + corereg = sb_setcore(sbh, SB_PCMCIA, 0); + if (NULL != corereg) { + sb = REGS2SB(corereg); + + imstate = R_SBREG(sbh, &sb->sbimstate); + /* handle surprise removal */ + if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) { + AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + inband = imstate & SBIM_IBE; + timeout = imstate & SBIM_TO; + } + tmstate = R_SBREG(sbh, &sb->sbtmstatehigh); + if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) { + if (!inband) { + serror = 1; + sb_serr_clear(sbh); + } + OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK); + AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK); + } + } + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + + } else if (si->bus == SDIO_BUS) { + + INTR_OFF(si, intr_val); + origidx = sb_coreidx(sbh); + + corereg = sb_setcore(sbh, SB_PCMCIA, 0); + if (NULL != corereg) { + sb = REGS2SB(corereg); + + imstate = R_SBREG(sbh, &sb->sbimstate); + if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) { + AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + /* inband = imstate & SBIM_IBE; cmd error */ + timeout = imstate & SBIM_TO; + } + tmstate = R_SBREG(sbh, &sb->sbtmstatehigh); + if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) { + sb_serr_clear(sbh); + serror = 1; + OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK); + AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK); + } + } + + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + } + + if ((inband | timeout | serror) != 0) { + rc = TRUE; + SB_ERROR(("sb_taclear: inband 0x%x, serror 0x%x, timeout 0x%x!\n", inband, serror, timeout)); + } + + return (rc); +} + +/* do buffered registers update */ +void +sb_commit(void *sbh) +{ + sb_info_t *si; + sbpciregs_t *pciregs; + uint origidx; + uint intr_val = 0; + + si = SB_INFO(sbh); + + origidx = si->curidx; + ASSERT(GOODIDX(origidx)); + + INTR_OFF(si, intr_val); + /* switch over to pci core */ + pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0); + + /* do the buffer registers update */ + W_REG(&pciregs->bcastaddr, SB_COMMIT); + W_REG(&pciregs->bcastdata, 0x0); + + /* restore core index */ + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); +} + +/* reset and re-enable a core */ +void +sb_core_reset(void *sbh, uint32 bits) +{ + sb_info_t *si; + sbconfig_t *sb; + volatile uint32 dummy; + + si = SB_INFO(sbh); + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + + /* + * Must do the disable sequence first to work for arbitrary current core state. + */ + sb_core_disable(sbh, bits); + + /* + * Now do the initialization sequence. + */ + + /* set reset while enabling the clock and forcing them on throughout the core */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + + if (sb_coreid(sbh) == SB_ILINE100) { + bcm_mdelay(50); + } else { + OSL_DELAY(1); + } + + if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) { + W_SBREG(sbh, &sb->sbtmstatehigh, 0); + } + if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { + AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + } + + /* clear reset and allow it to propagate throughout the core */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + OSL_DELAY(1); + + /* leave clock enabled */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + OSL_DELAY(1); +} + +void +sb_core_tofixup(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + + if (si->pcirev >= 5) + return; + + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + + if (si->bus == SB_BUS) { + SET_SBREG(sbh, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x5 << SBIMCL_RTO_SHIFT) | 0x3); + } else { + if (sb_coreid(sbh) == SB_PCI) { + SET_SBREG(sbh, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + } else { + SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); + } + } + + sb_commit(sbh); +} + +void +sb_core_disable(void *sbh, uint32 bits) +{ + sb_info_t *si; + volatile uint32 dummy; + sbconfig_t *sb; + + si = SB_INFO(sbh); + + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + + /* must return if core is already in reset */ + if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET) + return; + + /* put into reset and return if clocks are not enabled */ + if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0) + goto disable; + + /* set the reject bit */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ)); + + /* spin until reject is set */ + while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0) + OSL_DELAY(1); + + /* spin until sbtmstatehigh.busy is clear */ + while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY) + OSL_DELAY(1); + + /* set reset and reject while enabling the clocks */ + W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + OSL_DELAY(10); + + disable: + /* leave reset and reject asserted */ + W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET)); + OSL_DELAY(1); +} + +void +sb_watchdog(void *sbh, uint ticks) +{ + sb_info_t *si = SB_INFO(sbh); + + /* instant NMI */ + switch (si->gpioid) { + case SB_CC: + sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); + break; + case SB_EXTIF: + sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); + break; + } +} + +/* initialize the pcmcia core */ +void +sb_pcmcia_init(void *sbh) +{ + sb_info_t *si; + uint8 cor; + + si = SB_INFO(sbh); + + /* enable d11 mac interrupts */ + if (si->chip == BCM4301_DEVICE_ID) { + /* Have to use FCR2 in 4301 */ + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); + cor |= COR_IRQEN | COR_FUNEN; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); + } else { + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); + cor |= COR_IRQEN | COR_FUNEN; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); + } + +} + + +/* + * Configure the pci core for pci client (NIC) action + * and get appropriate dma offset value. + * coremask is the bitvec of cores by index to be enabled. + */ +void +sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask) +{ + sb_info_t *si; + sbconfig_t *sb; + sbpciregs_t *pciregs; + uint32 sbflag; + uint32 w; + uint idx; + + si = SB_INFO(sbh); + + if (dmaoffset) + *dmaoffset = 0; + + /* if not pci bus, we're done */ + if (si->bus != PCI_BUS) + return; + + ASSERT(si->pciidx); + + /* get current core index */ + idx = si->curidx; + + /* we interrupt on this backplane flag number */ + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; + + /* switch over to pci core */ + pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx); + sb = REGS2SB(pciregs); + + /* + * Enable sb->pci interrupts. Assume + * PCI rev 2.3 support was added in pci core rev 6 and things changed.. + */ + if (si->pcirev < 6) { + /* set sbintvec bit for our flag number */ + OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag)); + } else { + /* pci config write to set this core bit in PCIIntMask */ + w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); + w |= (coremask << PCI_SBIM_SHIFT); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); + } + + /* enable prefetch and bursts for sonics-to-pci translation 2 */ + OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); + + if (si->pcirev < 5) { + SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + sb_commit(sbh); + } + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + /* use large sb pci dma window */ + if (dmaoffset) + *dmaoffset = SB_PCI_DMA; +} + +uint32 +sb_base(uint32 admatch) +{ + uint32 base; + uint type; + + type = admatch & SBAM_TYPE_MASK; + ASSERT(type < 3); + + base = 0; + + if (type == 0) { + base = admatch & SBAM_BASE0_MASK; + } else if (type == 1) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + base = admatch & SBAM_BASE1_MASK; + } else if (type == 2) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + base = admatch & SBAM_BASE2_MASK; + } + + return (base); +} + +uint32 +sb_size(uint32 admatch) +{ + uint32 size; + uint type; + + type = admatch & SBAM_TYPE_MASK; + ASSERT(type < 3); + + size = 0; + + if (type == 0) { + size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); + } else if (type == 1) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); + } else if (type == 2) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); + } + + return (size); +} + +/* return the core-type instantiation # of the current core */ +uint +sb_coreunit(void *sbh) +{ + sb_info_t *si; + uint idx; + uint coreid; + uint coreunit; + uint i; + + si = SB_INFO(sbh); + coreunit = 0; + + idx = si->curidx; + + ASSERT(GOODREGS(si->curmap)); + coreid = sb_coreid(sbh); + + /* count the cores of our type */ + for (i = 0; i < idx; i++) + if (si->coreid[i] == coreid) + coreunit++; + + return (coreunit); +} + +static INLINE uint32 +factor6(uint32 x) +{ + switch (x) { + case CC_F6_2: return 2; + case CC_F6_3: return 3; + case CC_F6_4: return 4; + case CC_F6_5: return 5; + case CC_F6_6: return 6; + case CC_F6_7: return 7; + default: return 0; + } +} + +/* calculate the speed the SB would run at given a set of clockcontrol values */ +uint32 +sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) +{ + uint32 n1, n2, clock, m1, m2, m3, mc; + + n1 = n & CN_N1_MASK; + n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; + + if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { + n1 = factor6(n1); + n2 += CC_F5_BIAS; + } else if (pll_type == PLL_TYPE2) { + n1 += CC_T2_BIAS; + n2 += CC_T2_BIAS; + ASSERT((n1 >= 2) && (n1 <= 7)); + ASSERT((n2 >= 5) && (n2 <= 23)); + } else if (pll_type == PLL_TYPE3) { + return (100000000); + } else + ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4)); + + clock = CC_CLOCK_BASE * n1 * n2; + + if (clock == 0) + return 0; + + m1 = m & CC_M1_MASK; + m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; + m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; + mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; + + if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { + m1 = factor6(m1); + if (pll_type == PLL_TYPE1) + m2 += CC_F5_BIAS; + else + m2 = factor6(m2); + m3 = factor6(m3); + + switch (mc) { + case CC_MC_BYPASS: return (clock); + case CC_MC_M1: return (clock / m1); + case CC_MC_M1M2: return (clock / (m1 * m2)); + case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); + case CC_MC_M1M3: return (clock / (m1 * m3)); + default: return (0); + } + } else { + ASSERT(pll_type == PLL_TYPE2); + + m1 += CC_T2_BIAS; + m2 += CC_T2M2_BIAS; + m3 += CC_T2_BIAS; + ASSERT((m1 >= 2) && (m1 <= 7)); + ASSERT((m2 >= 3) && (m2 <= 10)); + ASSERT((m3 >= 2) && (m3 <= 7)); + + if ((mc & CC_T2MC_M1BYP) == 0) + clock /= m1; + if ((mc & CC_T2MC_M2BYP) == 0) + clock /= m2; + if ((mc & CC_T2MC_M3BYP) == 0) + clock /= m3; + + return(clock); + } +} + +/* returns the current speed the SB is running at */ +uint32 +sb_clock(void *sbh) +{ + sb_info_t *si; + extifregs_t *eir; + chipcregs_t *cc; + uint32 n, m; + uint idx; + uint32 pll_type, rate; + uint intr_val = 0; + + si = SB_INFO(sbh); + idx = si->curidx; + pll_type = PLL_TYPE1; + + INTR_OFF(si, intr_val); + + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { + n = R_REG(&eir->clockcontrol_n); + m = R_REG(&eir->clockcontrol_sb); + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + n = R_REG(&cc->clockcontrol_n); + m = R_REG(&cc->clockcontrol_sb); + } else { + INTR_RESTORE(si, intr_val); + return 0; + } + + /* calculate rate */ + rate = sb_clock_rate(pll_type, n, m); + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + INTR_RESTORE(si, intr_val); + + return rate; +} + +/* change logical "focus" to the gpio core for optimized access */ +void* +sb_gpiosetcore(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + + return (sb_setcoreidx(sbh, si->gpioidx)); +} + +/* mask&set gpiocontrol bits */ +uint32 +sb_gpiocontrol(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiocontrol); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpiocontrol); + break; + + case SB_EXTIF: + return (0); + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio output enable bits */ +uint32 +sb_gpioouten(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioouten); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpioouten); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpio[0].outen); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio output bits */ +uint32 +sb_gpioout(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioout); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpioout); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpio[0].out); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* return the current gpioin register value */ +uint32 +sb_gpioin(void *sbh) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioin); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpioin); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpioin); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0)); +} + +/* mask&set gpio interrupt polarity bits */ +uint32 +sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiointpolarity); + break; + + case SB_PCI: + /* pci gpio implementation does not support interrupt polarity */ + ASSERT(0); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpiointpolarity); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio interrupt mask bits */ +uint32 +sb_gpiointmask(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiointmask); + break; + + case SB_PCI: + /* pci gpio implementation does not support interrupt mask */ + ASSERT(0); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpiointmask); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + + +/* + * Return the slow clock source. + * Three sources of SLOW CLOCK: LPO, Xtal, PCI + */ +static uint +sb_slowclk_src(void *sbh) +{ + sb_info_t *si; + chipcregs_t *cc; + uint32 v; + + si = SB_INFO(sbh); + + ASSERT(sb_coreid(sbh) == SB_CC); + + if (si->ccrev < 6) { + switch (si->bus) { + case PCMCIA_BUS: return (SCC_SS_XTAL); + case PCI_BUS: + v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); + if (v & PCI_CFG_GPIO_SCS) + return (SCC_SS_PCI); + else + return (SCC_SS_XTAL); + default: return (SCC_SS_XTAL); + } + } else if (si->ccrev < 10) { + cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); + v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK; + return (v); + } else { + return (SCC_SS_XTAL); + } +} + +/* + * Return the slowclock min or max frequency. + * Three sources of SLOW CLOCK: + * 1. On Chip LPO - 32khz or 160khz + * 2. On Chip Xtal OSC - 20mhz/4*(divider+1) + * 3. External PCI clock - 66mhz/4*(divider+1) + */ +static uint +sb_slowclk_freq(void *sbh, bool max) +{ + sb_info_t *si; + chipcregs_t *cc; + uint32 slowclk; + uint div; + + si = SB_INFO(sbh); + + ASSERT(sb_coreid(sbh) == SB_CC); + + cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); + + /* shouldn't be here unless we've established the chip has dynamic power control */ + ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); + + slowclk = sb_slowclk_src(sbh); + if (si->ccrev < 6) { + if (slowclk == SCC_SS_PCI) + return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); + else + return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); + } else if (si->ccrev < 10) { + div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); + if (slowclk == SCC_SS_LPO) + return (max? LPOMAXFREQ : LPOMINFREQ); + else if (slowclk == SCC_SS_XTAL) + return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); + else if (slowclk == SCC_SS_PCI) + return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); + else + ASSERT(0); + } else { + /* Chipc rev 10 is InstaClock */ + div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHF; + div = 4 * (div + 1); + return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); + } + return (0); +} + +static void +sb_pwrctl_setdelay(void *sbh, void *chipcregs) +{ + chipcregs_t * cc; + uint slowmaxfreq, pll_delay, slowclk; + uint pll_on_delay, fref_sel_delay; + + pll_delay = PLL_DELAY; + + /* If the slow clock is not sourced by the xtal then add the xtal_on_delay + * since the xtal will also be powered down by dynamic power control logic. + */ + slowclk = sb_slowclk_src(sbh); + if (slowclk != SCC_SS_XTAL) + pll_delay += XTAL_ON_DELAY; + + slowmaxfreq = sb_slowclk_freq(sbh, TRUE); + + pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; + fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; + + cc = (chipcregs_t *)chipcregs; + W_REG(&cc->pll_on_delay, pll_on_delay); + W_REG(&cc->fref_sel_delay, fref_sel_delay); +} + +/* set or get slow clock divider */ +int +sb_pwrctl_slowclk(void *sbh, bool set, uint *div) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + uint intr_val = 0; + uint err = 0; + + si = SB_INFO(sbh); + + /* chipcommon cores prior to rev6 don't support slowclkcontrol */ + if (si->ccrev < 6) + return 1; + + /* chipcommon cores rev10 are a whole new ball game */ + if (si->ccrev >= 10) + return 1; + + if (set && ((*div % 4) || (*div < 4))) + return 2; + + INTR_OFF(si, intr_val); + origidx = si->curidx; + cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); + ASSERT(cc != NULL); + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) { + err = 3; + goto done; + } + + if (set) { + SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHF)); + sb_pwrctl_setdelay(sbh, (void *)cc); + } else + *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return err; +} + +/* initialize power control delay registers */ +void +sb_pwrctl_init(void *sbh) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + + si = SB_INFO(sbh); + + if (si->bus == SB_BUS) + return; + + origidx = si->curidx; + + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) + return; + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + + /* 4317pc does not work with SlowClock less than 5Mhz */ + if (si->bus == PCMCIA_BUS) { + if ((si->ccrev >= 6) && (si->ccrev < 10)) + SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (SCC_DEF_DIV << SCC_CD_SHF)); + } + + sb_pwrctl_setdelay(sbh, (void *)cc); + +done: + sb_setcoreidx(sbh, origidx); +} + +/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ +uint16 +sb_pwrctl_fast_pwrup_delay(void *sbh) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + uint slowminfreq; + uint16 fpdelay; + uint intr_val = 0; + + si = SB_INFO(sbh); + fpdelay = 0; + origidx = si->curidx; + + if (si->bus == SB_BUS) + goto done; + + INTR_OFF(si, intr_val); + + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) + goto done; + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + + slowminfreq = sb_slowclk_freq(sbh, FALSE); + fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return (fpdelay); +} + +/* turn primary xtal and/or pll off/on */ +int +sb_pwrctl_xtal(void *sbh, uint what, bool on) +{ + sb_info_t *si; + uint32 in, out, outen; + + si = SB_INFO(sbh); + + switch (si->bus) { + + + case PCMCIA_BUS: + return (0); + + + case PCI_BUS: + + in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); + out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); + outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); + + /* + * We can't actually read the state of the PLLPD so we infer it + * by the value of XTAL_PU which *is* readable via gpioin. + */ + if (on && (in & PCI_CFG_GPIO_XTAL)) + return (0); + + if (what & XTAL) + outen |= PCI_CFG_GPIO_XTAL; + if (what & PLL) + outen |= PCI_CFG_GPIO_PLL; + + if (on) { + /* turn primary xtal on */ + if (what & XTAL) { + out |= PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); + OSL_DELAY(XTAL_ON_DELAY); + } + + /* turn pll on */ + if (what & PLL) { + out &= ~PCI_CFG_GPIO_PLL; + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); + OSL_DELAY(2000); + } + } else { + if (what & XTAL) + out &= ~PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); + } + + default: + return (-1); + } + + return (0); +} + +/* set dynamic power control mode (forceslow, forcefast, dynamic) */ +/* returns true if ignore pll off is set and false if it is not */ +bool +sb_pwrctl_clk(void *sbh, uint mode) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + uint32 scc; + bool forcefastclk=FALSE; + uint intr_val = 0; + + si = SB_INFO(sbh); + + /* chipcommon cores prior to rev6 don't support slowclkcontrol */ + if (si->ccrev < 6) + return (FALSE); + + /* chipcommon cores rev10 are a whole new ball game */ + if (si->ccrev >= 10) + return (FALSE); + + INTR_OFF(si, intr_val); + + origidx = si->curidx; + + cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); + ASSERT(cc != NULL); + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + + switch (mode) { + case CLK_FAST: /* force fast (pll) clock */ + /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ + sb_pwrctl_xtal(sbh, XTAL, ON); + + SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); + break; + + case CLK_SLOW: /* force slow clock */ + if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS)) + return (-1); + + if (si->ccrev >= 6) + OR_REG(&cc->slow_clk_ctl, SCC_FS); + break; + + case CLK_DYNAMIC: /* enable dynamic power control */ + scc = R_REG(&cc->slow_clk_ctl); + scc &= ~(SCC_FS | SCC_IP | SCC_XC); + if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) + scc |= SCC_XC; + W_REG(&cc->slow_clk_ctl, scc); + + /* for dynamic control, we have to release our xtal_pu "force on" */ + if (scc & SCC_XC) + sb_pwrctl_xtal(sbh, XTAL, OFF); + break; + } + + /* Is the h/w forcing the use of the fast clk */ + forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return (forcefastclk); +} + +/* register driver interrupt disabling and restoring callback functions */ +void +sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + si->intr_arg = intr_arg; + si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; + si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; + si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn; + /* save current core id. when this function called, the current core + * must be the core which provides driver functions(il, et, wl, etc.) + */ + si->dev_coreid = si->coreid[si->curidx]; +} + + diff --git a/package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh b/package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh new file mode 100644 index 0000000000..0187d47ea5 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh @@ -0,0 +1,21 @@ +#!/bin/sh +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +cat < +#include +EOF + +for file in $* ; do + ${NM} $file | sed -ne 's/[0-9A-Fa-f]* [DT] \([^ ]*\)/extern void \1; EXPORT_SYMBOL(\1);/p' +done diff --git a/package/linux/kernel-source/drivers/net/wl/Makefile b/package/linux/kernel-source/drivers/net/wl/Makefile new file mode 100644 index 0000000000..8f6056eb5e --- /dev/null +++ b/package/linux/kernel-source/drivers/net/wl/Makefile @@ -0,0 +1,59 @@ +# +# Makefile for the Broadcom wl driver +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := wl.o + +WL_OBJS := wl_linux.o wlc.o d11ucode.o wlc_phy.o wlc_rate.o wlc_led.o wlc_security.o rc4.o tkhash.o bcmwpa.o + +INSUP_OBJS := aes.o aeskeywrap.o hmac.o md5.o passhash.o prf.o rijndael-alg-fst.o sha1.o + +# Alternate ioctl interfaces +ifeq ($(CONFIG_NET_WIRELESS),y) +WL_OBJS += wlc_cmn_ioctl.o +endif +ifeq ($(CONFIG_WL_OID),y) +WL_OBJS += wl_oid.o +endif + +ifeq ($(CONFIG_WL_STA),y) +WL_OBJS += $(INSUP_OBJS) +endif + +# Prefix driver variants +WL_APOBJS := $(foreach obj,$(WL_OBJS),ap_$(obj)) +WL_STAOBJS := $(foreach obj,$(WL_OBJS) wlc_sup.o,sta_$(obj)) +WL_APSTAOBJS := $(foreach obj,$(WL_OBJS) wlc_sup.o,apsta_$(obj)) +ifneq ($(CONFIG_WL_STA),y) +WL_APSTAOBJS += $(foreach obj,$(INSUP_OBJS), apsta_$(obj)) +endif + +# Either or both +ifeq ($(CONFIG_WL_AP),y) +AP := AP +endif +ifeq ($(CONFIG_WL_STA),y) +STA := STA +endif + +# Build all variants as modules but link only one of them +export-objs := +obj-y := $(WL_$(AP)$(STA)OBJS) +obj-m := $(O_TARGET) +variant-objs := $(WL_APOBJS) $(WL_STAOBJS) $(WL_APSTAOBJS) + +EXTRA_CFLAGS += -DDMA + +include $(TOPDIR)/Rules.make + + diff --git a/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c b/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c new file mode 100644 index 0000000000..18eba46791 --- /dev/null +++ b/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c @@ -0,0 +1,912 @@ +/* + * + * bcm47xx pcmcia driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Based on sa1100_generic.c from www.handhelds.org, + * and au1000_generic.c from oss.sgi.com. + * + * $Id$ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include "cs_internal.h" + +#include +#include +#include + +#include +#include +#include + +#include "bcm4710pcmcia.h" + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +#endif + +MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller"); + +/* This structure maintains housekeeping state for each socket, such + * as the last known values of the card detect pins, or the Card Services + * callback value associated with the socket: + */ +static struct bcm47xx_pcmcia_socket *pcmcia_socket; +static int socket_count; + + +/* Returned by the low-level PCMCIA interface: */ +static struct pcmcia_low_level *pcmcia_low_level; + +/* Event poll timer structure */ +static struct timer_list poll_timer; + + +/* Prototypes for routines which are used internally: */ + +static int bcm47xx_pcmcia_driver_init(void); +static void bcm47xx_pcmcia_driver_shutdown(void); +static void bcm47xx_pcmcia_task_handler(void *data); +static void bcm47xx_pcmcia_poll_event(unsigned long data); +static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs); +static struct tq_struct bcm47xx_pcmcia_task; + +#ifdef CONFIG_PROC_FS +static int bcm47xx_pcmcia_proc_status(char *buf, char **start, + off_t pos, int count, int *eof, void *data); +#endif + + +/* Prototypes for operations which are exported to the + * in-kernel PCMCIA core: + */ + +static int bcm47xx_pcmcia_init(unsigned int sock); +static int bcm47xx_pcmcia_suspend(unsigned int sock); +static int bcm47xx_pcmcia_register_callback(unsigned int sock, + void (*handler)(void *, unsigned int), void *info); +static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap); +static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value); +static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state); +static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state); +static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io); +static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io); +static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem); +static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem); +#ifdef CONFIG_PROC_FS +static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base); +#endif + +static struct pccard_operations bcm47xx_pcmcia_operations = { + bcm47xx_pcmcia_init, + bcm47xx_pcmcia_suspend, + bcm47xx_pcmcia_register_callback, + bcm47xx_pcmcia_inquire_socket, + bcm47xx_pcmcia_get_status, + bcm47xx_pcmcia_get_socket, + bcm47xx_pcmcia_set_socket, + bcm47xx_pcmcia_get_io_map, + bcm47xx_pcmcia_set_io_map, + bcm47xx_pcmcia_get_mem_map, + bcm47xx_pcmcia_set_mem_map, +#ifdef CONFIG_PROC_FS + bcm47xx_pcmcia_proc_setup +#endif +}; + + +/* + * bcm47xx_pcmcia_driver_init() + * + * This routine performs a basic sanity check to ensure that this + * kernel has been built with the appropriate board-specific low-level + * PCMCIA support, performs low-level PCMCIA initialization, registers + * this socket driver with Card Services, and then spawns the daemon + * thread which is the real workhorse of the socket driver. + * + * Please see linux/Documentation/arm/SA1100/PCMCIA for more information + * on the low-level kernel interface. + * + * Returns: 0 on success, -1 on error + */ +static int __init bcm47xx_pcmcia_driver_init(void) +{ + servinfo_t info; + struct pcmcia_init pcmcia_init; + struct pcmcia_state state; + unsigned int i; + unsigned long tmp; + + + printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE); + + CardServices(GetCardServicesInfo, &info); + + if (info.Revision != CS_RELEASE_CODE) { + printk(KERN_ERR "Card Services release codes do not match\n"); + return -1; + } + +#ifdef CONFIG_BCM4710 + pcmcia_low_level=&bcm4710_pcmcia_ops; +#else +#error Unsupported Broadcom BCM47XX board. +#endif + + pcmcia_init.handler=bcm47xx_pcmcia_interrupt; + + if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) { + printk(KERN_ERR "Unable to initialize PCMCIA service.\n"); + return -EIO; + } else { + printk("\t%d PCMCIA sockets initialized.\n", socket_count); + } + + pcmcia_socket = + kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count, + GFP_KERNEL); + memset(pcmcia_socket, 0, + sizeof(struct bcm47xx_pcmcia_socket) * socket_count); + if (!pcmcia_socket) { + printk(KERN_ERR "Card Services can't get memory \n"); + return -1; + } + + for (i = 0; i < socket_count; i++) { + if (pcmcia_low_level->socket_state(i, &state) < 0) { + printk(KERN_ERR "Unable to get PCMCIA status\n"); + return -EIO; + } + pcmcia_socket[i].k_state = state; + pcmcia_socket[i].cs_state.csc_mask = SS_DETECT; + + if (i == 0) { + pcmcia_socket[i].virt_io = + (unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000); + /* Substract ioport base which gets added by in/out */ + pcmcia_socket[i].virt_io -= mips_io_port_base; + pcmcia_socket[i].phys_attr = + (unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF); + pcmcia_socket[i].phys_mem = + (unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF); + } else { + printk(KERN_ERR "bcm4710: socket 1 not supported\n"); + return 1; + } + } + + /* Only advertise as many sockets as we can detect: */ + if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) { + printk(KERN_ERR "Unable to register socket service routine\n"); + return -ENXIO; + } + + /* Start the event poll timer. + * It will reschedule by itself afterwards. + */ + bcm47xx_pcmcia_poll_event(0); + + DEBUG(1, "bcm4710: initialization complete\n"); + return 0; + +} + +module_init(bcm47xx_pcmcia_driver_init); + + +/* + * bcm47xx_pcmcia_driver_shutdown() + * + * Invokes the low-level kernel service to free IRQs associated with this + * socket controller and reset GPIO edge detection. + */ +static void __exit bcm47xx_pcmcia_driver_shutdown(void) +{ + int i; + + del_timer_sync(&poll_timer); + unregister_ss_entry(&bcm47xx_pcmcia_operations); + pcmcia_low_level->shutdown(); + flush_scheduled_tasks(); + for (i = 0; i < socket_count; i++) { + if (pcmcia_socket[i].virt_io) + iounmap((void *)pcmcia_socket[i].virt_io); + if (pcmcia_socket[i].phys_attr) + iounmap((void *)pcmcia_socket[i].phys_attr); + if (pcmcia_socket[i].phys_mem) + iounmap((void *)pcmcia_socket[i].phys_mem); + } + DEBUG(1, "bcm4710: shutdown complete\n"); +} + +module_exit(bcm47xx_pcmcia_driver_shutdown); + +/* + * bcm47xx_pcmcia_init() + * We perform all of the interesting initialization tasks in + * bcm47xx_pcmcia_driver_init(). + * + * Returns: 0 + */ +static int bcm47xx_pcmcia_init(unsigned int sock) +{ + DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock); + + return 0; +} + +/* + * bcm47xx_pcmcia_suspend() + * + * We don't currently perform any actions on a suspend. + * + * Returns: 0 + */ +static int bcm47xx_pcmcia_suspend(unsigned int sock) +{ + DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock); + + return 0; +} + + +/* + * bcm47xx_pcmcia_events() + * + * Helper routine to generate a Card Services event mask based on + * state information obtained from the kernel low-level PCMCIA layer + * in a recent (and previous) sampling. Updates `prev_state'. + * + * Returns: an event mask for the given socket state. + */ +static inline unsigned +bcm47xx_pcmcia_events(struct pcmcia_state *state, + struct pcmcia_state *prev_state, + unsigned int mask, unsigned int flags) +{ + unsigned int events=0; + + if (state->bvd1 != prev_state->bvd1) { + + DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1); + + events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD; + } + + if (state->bvd2 != prev_state->bvd2) { + + DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2); + + events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN; + } + + if (state->detect != prev_state->detect) { + + DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect); + + events |= mask & SS_DETECT; + } + + + if (state->ready != prev_state->ready) { + + DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready); + + events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY); + } + + if (events != 0) { + DEBUG(2, "events: %s%s%s%s%s\n", + (events & SS_DETECT) ? "DETECT " : "", + (events & SS_READY) ? "READY " : "", + (events & SS_BATDEAD) ? "BATDEAD " : "", + (events & SS_BATWARN) ? "BATWARN " : "", + (events & SS_STSCHG) ? "STSCHG " : ""); + } + + *prev_state=*state; + return events; +} + + +/* + * bcm47xx_pcmcia_task_handler() + * + * Processes serviceable socket events using the "eventd" thread context. + * + * Event processing (specifically, the invocation of the Card Services event + * callback) occurs in this thread rather than in the actual interrupt + * handler due to the use of scheduling operations in the PCMCIA core. + */ +static void bcm47xx_pcmcia_task_handler(void *data) +{ + struct pcmcia_state state; + int i, events, irq_status; + + DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__); + + for (i = 0; i < socket_count; i++) { + if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0) + printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n"); + + events = bcm47xx_pcmcia_events(&state, + &pcmcia_socket[i].k_state, + pcmcia_socket[i].cs_state.csc_mask, + pcmcia_socket[i].cs_state.flags); + + if (pcmcia_socket[i].handler != NULL) { + pcmcia_socket[i].handler(pcmcia_socket[i].handler_info, + events); + } + } +} + +static struct tq_struct bcm47xx_pcmcia_task = { + routine: bcm47xx_pcmcia_task_handler +}; + + +/* + * bcm47xx_pcmcia_poll_event() + * + * Let's poll for events in addition to IRQs since IRQ only is unreliable... + */ +static void bcm47xx_pcmcia_poll_event(unsigned long dummy) +{ + DEBUG(4, "%s(): polling for events\n", __FUNCTION__); + + poll_timer.function = bcm47xx_pcmcia_poll_event; + poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD; + add_timer(&poll_timer); + schedule_task(&bcm47xx_pcmcia_task); +} + + +/* + * bcm47xx_pcmcia_interrupt() + * + * Service routine for socket driver interrupts (requested by the + * low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()). + * + * The actual interrupt-servicing work is performed by + * bcm47xx_pcmcia_task(), largely because the Card Services event- + * handling code performs scheduling operations which cannot be + * executed from within an interrupt context. + */ +static void +bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq); + schedule_task(&bcm47xx_pcmcia_task); +} + + +/* + * bcm47xx_pcmcia_register_callback() + * + * Implements the register_callback() operation for the in-kernel + * PCMCIA service (formerly SS_RegisterCallback in Card Services). If + * the function pointer `handler' is not NULL, remember the callback + * location in the state for `sock', and increment the usage counter + * for the driver module. (The callback is invoked from the interrupt + * service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services + * of interesting events.) Otherwise, clear the callback pointer in the + * socket state and decrement the module usage count. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_register_callback(unsigned int sock, + void (*handler)(void *, unsigned int), void *info) +{ + if (handler == NULL) { + pcmcia_socket[sock].handler = NULL; + MOD_DEC_USE_COUNT; + } else { + MOD_INC_USE_COUNT; + pcmcia_socket[sock].handler = handler; + pcmcia_socket[sock].handler_info = info; + } + return 0; +} + + +/* + * bcm47xx_pcmcia_inquire_socket() + * + * Implements the inquire_socket() operation for the in-kernel PCMCIA + * service (formerly SS_InquireSocket in Card Services). Of note is + * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of + * `cap' to "trick" Card Services into tolerating large "I/O memory" + * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory + * resource database check. (Mapped memory is set up within the socket + * driver itself.) + * + * In conjunction with the STATIC_MAP capability is a new field, + * `io_offset', recommended by David Hinds. Rather than go through + * the SetIOMap interface (which is not quite suited for communicating + * window locations up from the socket driver), we just pass up + * an offset which is applied to client-requested base I/O addresses + * in alloc_io_space(). + * + * Returns: 0 on success, -1 if no pin has been configured for `sock' + */ +static int +bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap) +{ + struct pcmcia_irq_info irq_info; + + if (sock >= socket_count) { + printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock); + return -1; + } + + /* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the + * force_low argument to validate_mem() in rsrc_mgr.c -- since in + * general, the mapped * addresses of the PCMCIA memory regions + * will not be within 0xffff, setting force_low would be + * undesirable. + * + * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory + * resource database; we instead pass up physical address ranges + * and allow other parts of Card Services to deal with remapping. + * + * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but + * not 32-bit CardBus devices. + */ + cap->features = (SS_CAP_PAGE_REGS | SS_CAP_STATIC_MAP | SS_CAP_PCCARD); + + irq_info.sock = sock; + irq_info.irq = -1; + + if (pcmcia_low_level->get_irq_info(&irq_info) < 0) { + printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock); + return -1; + } + + cap->irq_mask = 0; + cap->map_size = PAGE_SIZE; + cap->pci_irq = irq_info.irq; + cap->io_offset = pcmcia_socket[sock].virt_io; + + return 0; +} + + +/* + * bcm47xx_pcmcia_get_status() + * + * Implements the get_status() operation for the in-kernel PCMCIA + * service (formerly SS_GetStatus in Card Services). Essentially just + * fills in bits in `status' according to internal driver state or + * the value of the voltage detect chipselect register. + * + * As a debugging note, during card startup, the PCMCIA core issues + * three set_socket() commands in a row the first with RESET deasserted, + * the second with RESET asserted, and the last with RESET deasserted + * again. Following the third set_socket(), a get_status() command will + * be issued. The kernel is looking for the SS_READY flag (see + * setup_socket(), reset_socket(), and unreset_socket() in cs.c). + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status) +{ + struct pcmcia_state state; + + + if ((pcmcia_low_level->socket_state(sock, &state)) < 0) { + printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n"); + return -1; + } + + pcmcia_socket[sock].k_state = state; + + *status = state.detect ? SS_DETECT : 0; + + *status |= state.ready ? SS_READY : 0; + + /* The power status of individual sockets is not available + * explicitly from the hardware, so we just remember the state + * and regurgitate it upon request: + */ + *status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0; + + if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD) + *status |= state.bvd1 ? SS_STSCHG : 0; + else { + if (state.bvd1 == 0) + *status |= SS_BATDEAD; + else if (state.bvd2 == 0) + *status |= SS_BATWARN; + } + + *status |= state.vs_3v ? SS_3VCARD : 0; + + *status |= state.vs_Xv ? SS_XVCARD : 0; + + DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n", + (*status&SS_DETECT)?"DETECT ":"", + (*status&SS_READY)?"READY ":"", + (*status&SS_BATDEAD)?"BATDEAD ":"", + (*status&SS_BATWARN)?"BATWARN ":"", + (*status&SS_POWERON)?"POWERON ":"", + (*status&SS_STSCHG)?"STSCHG ":"", + (*status&SS_3VCARD)?"3VCARD ":"", + (*status&SS_XVCARD)?"XVCARD ":""); + + return 0; +} + + +/* + * bcm47xx_pcmcia_get_socket() + * + * Implements the get_socket() operation for the in-kernel PCMCIA + * service (formerly SS_GetSocket in Card Services). Not a very + * exciting routine. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state) +{ + DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); + + /* This information was given to us in an earlier call to set_socket(), + * so we're just regurgitating it here: + */ + *state = pcmcia_socket[sock].cs_state; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_socket() + * + * Implements the set_socket() operation for the in-kernel PCMCIA + * service (formerly SS_SetSocket in Card Services). We more or + * less punt all of this work and let the kernel handle the details + * of power configuration, reset, &c. We also record the value of + * `state' in order to regurgitate it to the PCMCIA core later. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state) +{ + struct pcmcia_configure configure; + + DEBUG(2, "\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n" + "\tVcc %d Vpp %d irq %d\n", + (state->csc_mask == 0) ? "" : "", + (state->csc_mask & SS_DETECT) ? "DETECT " : "", + (state->csc_mask & SS_READY) ? "READY " : "", + (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "", + (state->csc_mask & SS_BATWARN) ? "BATWARN " : "", + (state->csc_mask & SS_STSCHG) ? "STSCHG " : "", + (state->flags == 0) ? "" : "", + (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "", + (state->flags & SS_IOCARD) ? "IOCARD " : "", + (state->flags & SS_RESET) ? "RESET " : "", + (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "", + (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "", + state->Vcc, state->Vpp, state->io_irq); + + configure.sock = sock; + configure.vcc = state->Vcc; + configure.vpp = state->Vpp; + configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0; + configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0; + configure.reset = (state->flags & SS_RESET) ? 1 : 0; + + if (pcmcia_low_level->configure_socket(&configure) < 0) { + printk(KERN_ERR "Unable to configure socket %u\n", sock); + return -1; + } + + pcmcia_socket[sock].cs_state = *state; + return 0; +} + + +/* + * bcm47xx_pcmcia_get_io_map() + * + * Implements the get_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_GetIOMap in Card Services). Just returns an + * I/O map descriptor which was assigned earlier by a set_io_map(). + * + * Returns: 0 on success, -1 if the map index was out of range + */ +static int +bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map) +{ + DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + *map = pcmcia_socket[sock].io_map[map->map]; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_io_map() + * + * Implements the set_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetIOMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +int +bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map) +{ + unsigned int speed; + unsigned long start; + + DEBUG(2, "\tmap %u speed %u\n\tstart 0x%08lx stop 0x%08lx\n" + "\tflags: %s%s%s%s%s%s%s%s\n", + map->map, map->speed, map->start, map->stop, + (map->flags == 0) ? "" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", + (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + if (map->flags & MAP_ACTIVE) { + speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED; + pcmcia_socket[sock].speed_io = speed; + } + + start = map->start; + + if (map->stop == 1) { + map->stop = PAGE_SIZE - 1; + } + + map->start = pcmcia_socket[sock].virt_io; + map->stop = map->start + (map->stop - start); + pcmcia_socket[sock].io_map[map->map] = *map; + DEBUG(2, "set_io_map %d start %x stop %x\n", + map->map, map->start, map->stop); + return 0; +} + + +/* + * bcm47xx_pcmcia_get_mem_map() + * + * Implements the get_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_GetMemMap in Card Services). Just returns a + * memory map descriptor which was assigned earlier by a + * set_mem_map() request. + * + * Returns: 0 on success, -1 if the map index was out of range + */ +static int +bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map) +{ + DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); + + if (map->map >= MAX_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + *map = pcmcia_socket[sock].mem_map[map->map]; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_mem_map() + * + * Implements the set_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetMemMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +static int +bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map) +{ + unsigned int speed; + unsigned long start; + u_long flags; + + if (map->map >= MAX_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + DEBUG(2, "\tmap %u speed %u\n\tsys_start %#lx\n" + "\tsys_stop %#lx\n\tcard_start %#x\n" + "\tflags: %s%s%s%s%s%s%s%s\n", + map->map, map->speed, map->sys_start, map->sys_stop, + map->card_start, (map->flags == 0) ? "" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_ATTRIB) ? "ATTRIB " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : ""); + + if (map->flags & MAP_ACTIVE) { + /* When clients issue RequestMap, the access speed is not always + * properly configured: + */ + speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED; + + /* TBD */ + if (map->flags & MAP_ATTRIB) { + pcmcia_socket[sock].speed_attr = speed; + } else { + pcmcia_socket[sock].speed_mem = speed; + } + } + + save_flags(flags); + cli(); + start = map->sys_start; + + if (map->sys_stop == 0) + map->sys_stop = PAGE_SIZE - 1; + + if (map->flags & MAP_ATTRIB) { + map->sys_start = pcmcia_socket[sock].phys_attr + + map->card_start; + } else { + map->sys_start = pcmcia_socket[sock].phys_mem + + map->card_start; + } + + map->sys_stop = map->sys_start + (map->sys_stop - start); + pcmcia_socket[sock].mem_map[map->map] = *map; + restore_flags(flags); + DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n", + map->map, map->sys_start, map->sys_stop, + map->card_start); + return 0; +} + + +#if defined(CONFIG_PROC_FS) + +/* + * bcm47xx_pcmcia_proc_setup() + * + * Implements the proc_setup() operation for the in-kernel PCMCIA + * service (formerly SS_ProcSetup in Card Services). + * + * Returns: 0 on success, -1 on error + */ +static void +bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base) +{ + struct proc_dir_entry *entry; + + if ((entry = create_proc_entry("status", 0, base)) == NULL) { + printk(KERN_ERR "Unable to install \"status\" procfs entry\n"); + return; + } + + entry->read_proc = bcm47xx_pcmcia_proc_status; + entry->data = (void *)sock; +} + + +/* + * bcm47xx_pcmcia_proc_status() + * + * Implements the /proc/bus/pccard/??/status file. + * + * Returns: the number of characters added to the buffer + */ +static int +bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos, + int count, int *eof, void *data) +{ + char *p = buf; + unsigned int sock = (unsigned int)data; + + p += sprintf(p, "k_flags : %s%s%s%s%s%s%s\n", + pcmcia_socket[sock].k_state.detect ? "detect " : "", + pcmcia_socket[sock].k_state.ready ? "ready " : "", + pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "", + pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "", + pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "", + pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "", + pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : ""); + + p += sprintf(p, "status : %s%s%s%s%s%s%s%s%s\n", + pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "", + pcmcia_socket[sock].k_state.ready ? "SS_READY " : "", + pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "", + pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "", + (pcmcia_socket[sock].cs_state.flags & SS_IOCARD && + pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "", + ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && + (pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "", + ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && + (pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "", + pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "", + pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : ""); + + p += sprintf(p, "mask : %s%s%s%s%s\n", + pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : ""); + + p += sprintf(p, "cs_flags : %s%s%s%s%s\n", + pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ? + "SS_PWR_AUTO " : "", + pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? + "SS_IOCARD " : "", + pcmcia_socket[sock].cs_state.flags & SS_RESET ? + "SS_RESET " : "", + pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ? + "SS_SPKR_ENA " : "", + pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ? + "SS_OUTPUT_ENA " : ""); + + p += sprintf(p, "Vcc : %d\n", pcmcia_socket[sock].cs_state.Vcc); + p += sprintf(p, "Vpp : %d\n", pcmcia_socket[sock].cs_state.Vpp); + p += sprintf(p, "irq : %d\n", pcmcia_socket[sock].cs_state.io_irq); + p += sprintf(p, "I/O : %u\n", pcmcia_socket[sock].speed_io); + p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr); + p += sprintf(p, "common : %u\n", pcmcia_socket[sock].speed_mem); + return p-buf; +} + + +#endif /* defined(CONFIG_PROC_FS) */ diff --git a/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c b/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c new file mode 100644 index 0000000000..6e3da040c8 --- /dev/null +++ b/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c @@ -0,0 +1,266 @@ +/* + * BCM4710 specific pcmcia routines. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include "cs_internal.h" + +#include +#include +#include + + +#include +#include +#include +#include +#include + +#include "bcm4710pcmcia.h" + +/* Use a static var for irq dev_id */ +static int bcm47xx_pcmcia_dev_id; + +/* Do we think we have a card or not? */ +static int bcm47xx_pcmcia_present = 0; + + +static void bcm4710_pcmcia_reset(void) +{ + extifregs_t *eir; + unsigned long s; + uint32 out0, out1, outen; + + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + save_and_cli(s); + + /* Use gpio7 to reset the pcmcia slot */ + outen = readl(&eir->gpio[0].outen); + outen |= BCM47XX_PCMCIA_RESET; + out0 = readl(&eir->gpio[0].out); + out0 &= ~(BCM47XX_PCMCIA_RESET); + out1 = out0 | BCM47XX_PCMCIA_RESET; + + writel(out0, &eir->gpio[0].out); + writel(outen, &eir->gpio[0].outen); + mdelay(1); + writel(out1, &eir->gpio[0].out); + mdelay(1); + writel(out0, &eir->gpio[0].out); + + restore_flags(s); +} + + +static int bcm4710_pcmcia_init(struct pcmcia_init *init) +{ + struct pci_dev *pdev; + extifregs_t *eir; + uint32 outen, intp, intm, tmp; + uint16 *attrsp; + int rc = 0, i; + extern unsigned long bcm4710_cpu_cycle; + + + if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_EXTIF, NULL))) { + printk(KERN_ERR "bcm4710_pcmcia: extif not found\n"); + return -ENODEV; + } + eir = (extifregs_t *) ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + + /* Initialize the pcmcia i/f: 16bit no swap */ + writel(CF_EM_PCMCIA | CF_DS | CF_EN, &eir->pcmcia_config); + +#ifdef notYet + + /* Set the timing for memory accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_memwait); /* 0x01020a0c for a 100Mhz clock */ + + /* Set the timing for I/O accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_iowait); /* 0x01020a0c for a 100Mhz clock */ + + /* Set the timing for attribute accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_attrwait); /* 0x01020a0c for a 100Mhz clock */ + +#endif + /* Make sure gpio0 and gpio5 are inputs */ + outen = readl(&eir->gpio[0].outen); + outen &= ~(BCM47XX_PCMCIA_WP | BCM47XX_PCMCIA_STSCHG | BCM47XX_PCMCIA_RESET); + writel(outen, &eir->gpio[0].outen); + + /* Issue a reset to the pcmcia socket */ + bcm4710_pcmcia_reset(); + +#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS + /* Setup gpio5 to be the STSCHG interrupt */ + intp = readl(&eir->gpiointpolarity); + writel(intp | BCM47XX_PCMCIA_STSCHG, &eir->gpiointpolarity); /* Active low */ + intm = readl(&eir->gpiointmask); + writel(intm | BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Enable it */ +#endif + + DEBUG(2, "bcm4710_pcmcia after reset:\n"); + DEBUG(2, "\textstatus\t= 0x%08x:\n", readl(&eir->extstatus)); + DEBUG(2, "\tpcmcia_config\t= 0x%08x:\n", readl(&eir->pcmcia_config)); + DEBUG(2, "\tpcmcia_memwait\t= 0x%08x:\n", readl(&eir->pcmcia_memwait)); + DEBUG(2, "\tpcmcia_attrwait\t= 0x%08x:\n", readl(&eir->pcmcia_attrwait)); + DEBUG(2, "\tpcmcia_iowait\t= 0x%08x:\n", readl(&eir->pcmcia_iowait)); + DEBUG(2, "\tgpioin\t\t= 0x%08x:\n", readl(&eir->gpioin)); + DEBUG(2, "\tgpio_outen0\t= 0x%08x:\n", readl(&eir->gpio[0].outen)); + DEBUG(2, "\tgpio_out0\t= 0x%08x:\n", readl(&eir->gpio[0].out)); + DEBUG(2, "\tgpiointpolarity\t= 0x%08x:\n", readl(&eir->gpiointpolarity)); + DEBUG(2, "\tgpiointmask\t= 0x%08x:\n", readl(&eir->gpiointmask)); + +#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS + /* Request pcmcia interrupt */ + rc = request_irq(BCM47XX_PCMCIA_IRQ, init->handler, SA_INTERRUPT, + "PCMCIA Interrupt", &bcm47xx_pcmcia_dev_id); +#endif + + attrsp = (uint16 *)ioremap_nocache(EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF), 0x1000); + tmp = readw(&attrsp[0]); + DEBUG(2, "\tattr[0] = 0x%04x\n", tmp); + if ((tmp == 0x7fff) || (tmp == 0x7f00)) { + bcm47xx_pcmcia_present = 0; + } else { + bcm47xx_pcmcia_present = 1; + } + + /* There's only one socket */ + return 1; +} + +static int bcm4710_pcmcia_shutdown(void) +{ + extifregs_t *eir; + uint32 intm; + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + /* Disable the pcmcia i/f */ + writel(0, &eir->pcmcia_config); + + /* Reset gpio's */ + intm = readl(&eir->gpiointmask); + writel(intm & ~BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Disable it */ + + free_irq(BCM47XX_PCMCIA_IRQ, &bcm47xx_pcmcia_dev_id); + + return 0; +} + +static int +bcm4710_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) +{ + extifregs_t *eir; + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + + if (sock != 0) { + printk(KERN_ERR "bcm4710 socket_state bad sock %d\n", sock); + return -1; + } + + if (bcm47xx_pcmcia_present) { + state->detect = 1; + state->ready = 1; + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = (readl(&eir->gpioin) & BCM47XX_PCMCIA_WP) == BCM47XX_PCMCIA_WP; + state->vs_3v = 0; + state->vs_Xv = 0; + } else { + state->detect = 0; + state->ready = 0; + } + + return 1; +} + + +static int bcm4710_pcmcia_get_irq_info(struct pcmcia_irq_info *info) +{ + if (info->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; + + info->irq = BCM47XX_PCMCIA_IRQ; + + return 0; +} + + +static int +bcm4710_pcmcia_configure_socket(const struct pcmcia_configure *configure) +{ + if (configure->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; + + + DEBUG(2, "Vcc %dV Vpp %dV output %d speaker %d reset %d\n", configure->vcc, + configure->vpp, configure->output, configure->speaker, configure->reset); + + if ((configure->vcc != 50) || (configure->vpp != 50)) { + printk("%s: bad Vcc/Vpp (%d:%d)\n", __FUNCTION__, configure->vcc, + configure->vpp); + } + + if (configure->reset) { + /* Issue a reset to the pcmcia socket */ + DEBUG(1, "%s: Reseting socket\n", __FUNCTION__); + bcm4710_pcmcia_reset(); + } + + + return 0; +} + +struct pcmcia_low_level bcm4710_pcmcia_ops = { + bcm4710_pcmcia_init, + bcm4710_pcmcia_shutdown, + bcm4710_pcmcia_socket_state, + bcm4710_pcmcia_get_irq_info, + bcm4710_pcmcia_configure_socket +}; + diff --git a/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h b/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h new file mode 100644 index 0000000000..42a7463bd7 --- /dev/null +++ b/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h @@ -0,0 +1,118 @@ +/* + * + * bcm47xx pcmcia driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Based on sa1100.h and include/asm-arm/arch-sa1100/pcmica.h + * from www.handhelds.org, + * and au1000_generic.c from oss.sgi.com. + * + * $Id$ + */ + +#if !defined(_BCM4710PCMCIA_H) +#define _BCM4710PCMCIA_H + +#include +#include +#include +#include +#include "cs_internal.h" + + +/* The 47xx can only support one socket */ +#define BCM47XX_PCMCIA_MAX_SOCK 1 + +/* In the bcm947xx gpio's are used for some pcmcia functions */ +#define BCM47XX_PCMCIA_WP 0x01 /* Bit 0 is WP input */ +#define BCM47XX_PCMCIA_STSCHG 0x20 /* Bit 5 is STSCHG input/interrupt */ +#define BCM47XX_PCMCIA_RESET 0x80 /* Bit 7 is RESET */ + +#define BCM47XX_PCMCIA_IRQ 2 + +/* The socket driver actually works nicely in interrupt-driven form, + * so the (relatively infrequent) polling is "just to be sure." + */ +#define BCM47XX_PCMCIA_POLL_PERIOD (2 * HZ) + +#define BCM47XX_PCMCIA_IO_SPEED (255) +#define BCM47XX_PCMCIA_MEM_SPEED (300) + + +struct pcmcia_state { + unsigned detect: 1, + ready: 1, + bvd1: 1, + bvd2: 1, + wrprot: 1, + vs_3v: 1, + vs_Xv: 1; +}; + + +struct pcmcia_configure { + unsigned sock: 8, + vcc: 8, + vpp: 8, + output: 1, + speaker: 1, + reset: 1; +}; + +struct pcmcia_irq_info { + unsigned int sock; + unsigned int irq; +}; + +/* This structure encapsulates per-socket state which we might need to + * use when responding to a Card Services query of some kind. + */ +struct bcm47xx_pcmcia_socket { + socket_state_t cs_state; + struct pcmcia_state k_state; + unsigned int irq; + void (*handler)(void *, unsigned int); + void *handler_info; + pccard_io_map io_map[MAX_IO_WIN]; + pccard_mem_map mem_map[MAX_WIN]; + ioaddr_t virt_io, phys_attr, phys_mem; + unsigned short speed_io, speed_attr, speed_mem; +}; + +struct pcmcia_init { + void (*handler)(int irq, void *dev, struct pt_regs *regs); +}; + +struct pcmcia_low_level { + int (*init)(struct pcmcia_init *); + int (*shutdown)(void); + int (*socket_state)(unsigned sock, struct pcmcia_state *); + int (*get_irq_info)(struct pcmcia_irq_info *); + int (*configure_socket)(const struct pcmcia_configure *); +}; + +extern struct pcmcia_low_level bcm47xx_pcmcia_ops; + +/* I/O pins replacing memory pins + * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75) + * + * These signals change meaning when going from memory-only to + * memory-or-I/O interface: + */ +#define iostschg bvd1 +#define iospkr bvd2 + + +/* + * Declaration for implementation specific low_level operations. + */ +extern struct pcmcia_low_level bcm4710_pcmcia_ops; + +#endif /* !defined(_BCM4710PCMCIA_H) */ diff --git a/package/linux/kernel-source/include/bcm4710.h b/package/linux/kernel-source/include/bcm4710.h new file mode 100644 index 0000000000..8b059978b4 --- /dev/null +++ b/package/linux/kernel-source/include/bcm4710.h @@ -0,0 +1,91 @@ +/* + * BCM4710 address space map and definitions + * Think twice before adding to this file, this is not the kitchen sink + * These definitions are not guaranteed for all 47xx chips, only the 4710 + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _bcm4710_h_ +#define _bcm4710_h_ + +/* Address map */ +#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ +#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ +#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ +#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ +#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ +#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ + +/* Core register space */ +#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ +#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ +#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ +#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ +#define BCM4710_REG_USB 0x18004000 /* USB core registers */ +#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ +#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ +#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ +#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ + +#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ +#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ +#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ +#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ +#define BCM4710_PROG 0x1f800000 /* Programable interface */ +#define BCM4710_FLASH 0x1fc00000 /* Flash */ + +#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + +#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) + +#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) +#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) + +#define SBFLAG_PCI 0 +#define SBFLAG_ENET0 1 +#define SBFLAG_ILINE20 2 +#define SBFLAG_CODEC 3 +#define SBFLAG_USB 4 +#define SBFLAG_EXTIF 5 +#define SBFLAG_ENET1 6 + +#ifdef CONFIG_HWSIM +#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0) +#else +#define BCM4710_TRACE(trval) +#endif + + +/* BCM94702 CPCI -ExtIF used for LocalBus devs */ + +#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF +#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000) +#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000) +#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR +#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000) +#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000) +#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ +#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0) + +#define LED_REG(x) \ + (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x))) + +/* + * Reset function implemented in PLD. Read or write should trigger hard reset + */ +#define SYS_HARD_RESET() \ + { for (;;) \ + *( (volatile unsigned char *)\ + KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \ + } + +#endif /* _bcm4710_h_ */ diff --git a/package/linux/kernel-source/include/bcmdevs.h b/package/linux/kernel-source/include/bcmdevs.h new file mode 100644 index 0000000000..5e41b87c89 --- /dev/null +++ b/package/linux/kernel-source/include/bcmdevs.h @@ -0,0 +1,251 @@ +/* + * Broadcom device-specific manifest constants. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _BCMDEVS_H +#define _BCMDEVS_H + + +/* Known PCI vendor Id's */ +#define VENDOR_EPIGRAM 0xfeda +#define VENDOR_BROADCOM 0x14e4 +#define VENDOR_3COM 0x10b7 +#define VENDOR_NETGEAR 0x1385 +#define VENDOR_DIAMOND 0x1092 +#define VENDOR_DELL 0x1028 +#define VENDOR_HP 0x0e11 +#define VENDOR_APPLE 0x106b + +/* PCI Device Id's */ +#define BCM4210_DEVICE_ID 0x1072 /* never used */ +#define BCM4211_DEVICE_ID 0x4211 +#define BCM4230_DEVICE_ID 0x1086 /* never used */ +#define BCM4231_DEVICE_ID 0x4231 + +#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ +#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ +#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ +#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ + +#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ +#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ + +#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ +#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ + +#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ +#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ +#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ +#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ +#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ +#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ +#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ +#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ + +#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ + +#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ +#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ +#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ +#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ +#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ +#define BCM4610_USB_ID 0x4615 /* 4610 usb */ + +#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ +#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ +#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ + +#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ +#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ + +#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ +#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ +#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ +#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ + +#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ +#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ +#define BCM4306_D11G_ID2 0x4325 +#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ +#define BCM4306_UART_ID 0x4322 /* 4306 uart */ +#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ +#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ + +#define BCM4309_PKG_ID 1 /* 4309 package id */ + +#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ +#define BCM4303_PKG_ID 2 /* 4303 package id */ + +#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ +#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ +#define BCM4310_UART_ID 0x4312 /* 4310 uart */ +#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ +#define BCM4310_USB_ID 0x4315 /* 4310 usb */ + +#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ +#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ + +#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ + +#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ +#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ +#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ + +#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ + +#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ + + +/* PCMCIA vendor Id's */ + +#define VENDOR_BROADCOM_PCMCIA 0x02d0 + +/* SDIO vendor Id's */ +#define VENDOR_BROADCOM_SDIO 0x00BF + + +/* boardflags */ +#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ +#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ +#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ +#define BFL_ENETSPI 0x0010 /* This board has ephy roboswitch spi */ +#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ +#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ +#define BFL_ENETVLAN 0x0100 /* This board can do vlan */ +#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ +#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ +#define BFL_FEM 0x0800 /* This board supports the Front End Module */ + +/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ +#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ +#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ +#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ +#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ +#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + +/* Bus types */ +#define SB_BUS 0 /* Silicon Backplane */ +#define PCI_BUS 1 /* PCI target */ +#define PCMCIA_BUS 2 /* PCMCIA target */ +#define SDIO_BUS 3 /* SDIO target */ + +/* power control defines */ +#define PLL_DELAY 150 /* 150us pll on delay */ +#define FREF_DELAY 200 /* 200us fref change delay */ +#define MIN_SLOW_CLK 32 /* 32us Slow clock period */ + +/* Reference Board Types */ + +#define BU4710_BOARD 0x0400 +#define VSIM4710_BOARD 0x0401 +#define QT4710_BOARD 0x0402 + +#define BU4610_BOARD 0x0403 +#define VSIM4610_BOARD 0x0404 + +#define BU4307_BOARD 0x0405 +#define BCM94301CB_BOARD 0x0406 +#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ +#define BCM94301MP_BOARD 0x0407 +#define BCM94307MP_BOARD 0x0408 +#define BCMAP4307_BOARD 0x0409 + +#define BU4309_BOARD 0x040a +#define BCM94309CB_BOARD 0x040b +#define BCM94309MP_BOARD 0x040c +#define BCM4309AP_BOARD 0x040d + +#define BCM94302MP_BOARD 0x040e + +#define VSIM4310_BOARD 0x040f +#define BU4711_BOARD 0x0410 +#define BCM94310U_BOARD 0x0411 +#define BCM94310AP_BOARD 0x0412 +#define BCM94310MP_BOARD 0x0414 + +#define BU4306_BOARD 0x0416 +#define BCM94306CB_BOARD 0x0417 +#define BCM94306MP_BOARD 0x0418 + +#define BCM94710D_BOARD 0x041a +#define BCM94710R1_BOARD 0x041b +#define BCM94710R4_BOARD 0x041c +#define BCM94710AP_BOARD 0x041d + + +#define BU2050_BOARD 0x041f + + +#define BCM94309G_BOARD 0x0421 + +#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ + +#define BU4704_BOARD 0x0423 +#define BU4702_BOARD 0x0424 + +#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ + +#define BU4317_BOARD 0x0426 + + +#define BCM94702MN_BOARD 0x0428 + +/* BCM4702 1U CompactPCI Board */ +#define BCM94702CPCI_BOARD 0x0429 + +/* BCM4702 with BCM95380 VLAN Router */ +#define BCM95380RR_BOARD 0x042a + +/* cb4306 with SiGe PA */ +#define BCM94306CBSG_BOARD 0x042b + +/* mp4301 with 2050 radio */ +#define BCM94301MPL_BOARD 0x042c + +/* cb4306 with SiGe PA */ +#define PCSG94306_BOARD 0x042d + +/* bu4704 with sdram */ +#define BU4704SD_BOARD 0x042e + +/* Dual 11a/11g Router */ +#define BCM94704AGR_BOARD 0x042f + +/* 11a-only minipci */ +#define BCM94308MP_BOARD 0x0430 + + + +/* BCM94317 boards */ +#define BCM94317CB_BOARD 0x0440 +#define BCM94317MP_BOARD 0x0441 +#define BCM94317PCMCIA_BOARD 0x0442 +#define BCM94317SDIO_BOARD 0x0443 + +#define BU4712_BOARD 0x0444 + +/* BCM4712 boards */ +#define BCM94712AGR_BOARD 0x0445 +#define BCM94712AP_BOARD 0x0446 + +/* BCM4702 boards */ +#define CT4702AP_BOARD 0x0447 + +/* BRCM 4306 w/ Front End Modules */ +#define BCM94306MPM 0x0450 +#define BCM94306MPL 0x0453 + + +#endif /* _BCMDEVS_H */ diff --git a/package/linux/kernel-source/include/bcmendian.h b/package/linux/kernel-source/include/bcmendian.h new file mode 100644 index 0000000000..6a2ed90f61 --- /dev/null +++ b/package/linux/kernel-source/include/bcmendian.h @@ -0,0 +1,127 @@ +/* + * local version of endian.h - byte order defines + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ +*/ + +#ifndef _BCMENDIAN_H_ +#define _BCMENDIAN_H_ + +#include + +/* Byte swap a 16 bit value */ +#define BCMSWAP16(val) \ + ((uint16)( \ + (((uint16)(val) & (uint16)0x00ffU) << 8) | \ + (((uint16)(val) & (uint16)0xff00U) >> 8) )) + +/* Byte swap a 32 bit value */ +#define BCMSWAP32(val) \ + ((uint32)( \ + (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ + (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ + (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ + (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) + +static INLINE uint16 +bcmswap16(uint16 val) +{ + return BCMSWAP16(val); +} + +static INLINE uint32 +bcmswap32(uint32 val) +{ + return BCMSWAP32(val); +} + +/* buf - start of buffer of shorts to swap */ +/* len - byte length of buffer */ +static INLINE void +bcmswap16_buf(uint16 *buf, uint len) +{ + len = len/2; + + while(len--){ + *buf = bcmswap16(*buf); + buf++; + } +} + +#ifndef hton16 +#ifndef IL_BIGENDIAN +#define HTON16(i) BCMSWAP16(i) +#define hton16(i) bcmswap16(i) +#define hton32(i) bcmswap32(i) +#define ntoh16(i) bcmswap16(i) +#define ntoh32(i) bcmswap32(i) +#define ltoh16(i) (i) +#define ltoh32(i) (i) +#define htol16(i) (i) +#define htol32(i) (i) +#else +#define HTON16(i) (i) +#define hton16(i) (i) +#define hton32(i) (i) +#define ntoh16(i) (i) +#define ntoh32(i) (i) +#define ltoh16(i) bcmswap16(i) +#define ltoh32(i) bcmswap32(i) +#define htol16(i) bcmswap16(i) +#define htol32(i) bcmswap32(i) +#endif +#endif + +#ifndef IL_BIGENDIAN +#define ltoh16_buf(buf, i) +#define htol16_buf(buf, i) +#else +#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) +#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) +#endif + +/* +* load 16-bit value from unaligned little endian byte array. +*/ +static INLINE uint16 +ltoh16_ua(uint8 *bytes) +{ + return (bytes[1]<<8)+bytes[0]; +} + +/* +* load 32-bit value from unaligned little endian byte array. +*/ +static INLINE uint32 +ltoh32_ua(uint8 *bytes) +{ + return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0]; +} + +/* +* load 16-bit value from unaligned big(network) endian byte array. +*/ +static INLINE uint16 +ntoh16_ua(uint8 *bytes) +{ + return (bytes[0]<<8)+bytes[1]; +} + +/* +* load 32-bit value from unaligned big(network) endian byte array. +*/ +static INLINE uint32 +ntoh32_ua(uint8 *bytes) +{ + return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; +} + +#endif /* _BCMENDIAN_H_ */ diff --git a/package/linux/kernel-source/include/bcmenet47xx.h b/package/linux/kernel-source/include/bcmenet47xx.h new file mode 100644 index 0000000000..22d7ee26d2 --- /dev/null +++ b/package/linux/kernel-source/include/bcmenet47xx.h @@ -0,0 +1,229 @@ +/* + * Hardware-specific definitions for + * Broadcom BCM47XX 10/100 Mbps Ethernet cores. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _bcmenet_47xx_h_ +#define _bcmenet_47xx_h_ + +#include +#include + +#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */ +#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */ +#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */ +#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */ + +/* power management event wakeup pattern constants */ +#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */ +#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */ +#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */ +#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */ +#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */ + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif /* PAD */ + +/* sometimes you just need the enet mib definitions */ +#include + +/* + * Host Interface Registers + */ +typedef volatile struct _bcmenettregs { + /* Device and Power Control */ + uint32 devcontrol; + uint32 PAD[2]; + uint32 biststatus; + uint32 wakeuplength; + uint32 PAD[3]; + + /* Interrupt Control */ + uint32 intstatus; + uint32 intmask; + uint32 gptimer; + uint32 PAD[23]; + + /* Ethernet MAC Address Filtering Control */ + uint32 PAD[2]; + uint32 enetftaddr; + uint32 enetftdata; + uint32 PAD[2]; + + /* Ethernet MAC Control */ + uint32 emactxmaxburstlen; + uint32 emacrxmaxburstlen; + uint32 emaccontrol; + uint32 emacflowcontrol; + + uint32 PAD[20]; + + /* DMA Lazy Interrupt Control */ + uint32 intrecvlazy; + uint32 PAD[63]; + + /* DMA engine */ + dmaregs_t dmaregs; + dmafifo_t dmafifo; + uint32 PAD[116]; + + /* EMAC Registers */ + uint32 rxconfig; + uint32 rxmaxlength; + uint32 txmaxlength; + uint32 PAD; + uint32 mdiocontrol; + uint32 mdiodata; + uint32 emacintmask; + uint32 emacintstatus; + uint32 camdatalo; + uint32 camdatahi; + uint32 camcontrol; + uint32 enetcontrol; + uint32 txcontrol; + uint32 txwatermark; + uint32 mibcontrol; + uint32 PAD[49]; + + /* EMAC MIB counters */ + bcmenetmib_t mib; + + uint32 PAD[585]; + + /* Sonics SiliconBackplane config registers */ + sbconfig_t sbconfig; +} bcmenetregs_t; + +/* device control */ +#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */ +#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */ +#define DC_ER ((uint32)1 << 15) /* ephy reset */ +#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */ +#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */ +#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */ +#define DC_PA_SHIFT 18 + +/* wakeup length */ +#define WL_P0_MASK 0x7f /* pattern 0 */ +#define WL_D0 ((uint32)1 << 7) +#define WL_P1_MASK 0x7f00 /* pattern 1 */ +#define WL_P1_SHIFT 8 +#define WL_D1 ((uint32)1 << 15) +#define WL_P2_MASK 0x7f0000 /* pattern 2 */ +#define WL_P2_SHIFT 16 +#define WL_D2 ((uint32)1 << 23) +#define WL_P3_MASK 0x7f000000 /* pattern 3 */ +#define WL_P3_SHIFT 24 +#define WL_D3 ((uint32)1 << 31) + +/* intstatus and intmask */ +#define I_PME ((uint32)1 << 6) /* power management event */ +#define I_TO ((uint32)1 << 7) /* general purpose timeout */ +#define I_PC ((uint32)1 << 10) /* descriptor error */ +#define I_PD ((uint32)1 << 11) /* data error */ +#define I_DE ((uint32)1 << 12) /* descriptor protocol error */ +#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */ +#define I_RO ((uint32)1 << 14) /* receive fifo overflow */ +#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */ +#define I_RI ((uint32)1 << 16) /* receive interrupt */ +#define I_XI ((uint32)1 << 24) /* transmit interrupt */ +#define I_EM ((uint32)1 << 26) /* emac interrupt */ +#define I_MW ((uint32)1 << 27) /* mii write */ +#define I_MR ((uint32)1 << 28) /* mii read */ + +/* emaccontrol */ +#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */ +#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */ +#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */ +#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */ +#define EMC_LC_SHIFT 5 + +/* emacflowcontrol */ +#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */ +#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */ + +/* interrupt receive lazy */ +#define IRL_TO_MASK 0x00ffffff /* timeout */ +#define IRL_FC_MASK 0xff000000 /* frame count */ +#define IRL_FC_SHIFT 24 /* frame count */ + +/* emac receive config */ +#define ERC_DB ((uint32)1 << 0) /* disable broadcast */ +#define ERC_AM ((uint32)1 << 1) /* accept all multicast */ +#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */ +#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */ +#define ERC_LE ((uint32)1 << 4) /* loopback enable */ +#define ERC_FE ((uint32)1 << 5) /* enable flow control */ +#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */ +#define ERC_RF ((uint32)1 << 7) /* reject filter */ + +/* emac mdio control */ +#define MC_MF_MASK 0x7f /* mdc frequency */ +#define MC_PE ((uint32)1 << 7) /* mii preamble enable */ + +/* emac mdio data */ +#define MD_DATA_MASK 0xffff /* r/w data */ +#define MD_TA_MASK 0x30000 /* turnaround value */ +#define MD_TA_SHIFT 16 +#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */ +#define MD_RA_MASK 0x7c0000 /* register address */ +#define MD_RA_SHIFT 18 +#define MD_PMD_MASK 0xf800000 /* physical media device */ +#define MD_PMD_SHIFT 23 +#define MD_OP_MASK 0x30000000 /* opcode */ +#define MD_OP_SHIFT 28 +#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */ +#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */ +#define MD_SB_MASK 0xc0000000 /* start bits */ +#define MD_SB_SHIFT 30 +#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */ + +/* emac intstatus and intmask */ +#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */ +#define EI_MIB ((uint32)1 << 1) /* mib interrupt */ +#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */ + +/* emac cam data high */ +#define CD_V ((uint32)1 << 16) /* valid bit */ + +/* emac cam control */ +#define CC_CE ((uint32)1 << 0) /* cam enable */ +#define CC_MS ((uint32)1 << 1) /* mask select */ +#define CC_RD ((uint32)1 << 2) /* read */ +#define CC_WR ((uint32)1 << 3) /* write */ +#define CC_INDEX_MASK 0x3f0000 /* index */ +#define CC_INDEX_SHIFT 16 +#define CC_CB ((uint32)1 << 31) /* cam busy */ + +/* emac ethernet control */ +#define EC_EE ((uint32)1 << 0) /* emac enable */ +#define EC_ED ((uint32)1 << 1) /* emac disable */ +#define EC_ES ((uint32)1 << 2) /* emac soft reset */ +#define EC_EP ((uint32)1 << 3) /* external phy select */ + +/* emac transmit control */ +#define EXC_FD ((uint32)1 << 0) /* full duplex */ +#define EXC_FM ((uint32)1 << 1) /* flowmode */ +#define EXC_SB ((uint32)1 << 2) /* single backoff enable */ +#define EXC_SS ((uint32)1 << 3) /* small slottime */ + +/* emac mib control */ +#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */ + +/* sometimes you just need the enet rxheader definitions */ +#include + +#endif /* _bcmenet_47xx_h_ */ diff --git a/package/linux/kernel-source/include/bcmenetmib.h b/package/linux/kernel-source/include/bcmenetmib.h new file mode 100644 index 0000000000..260d071ba8 --- /dev/null +++ b/package/linux/kernel-source/include/bcmenetmib.h @@ -0,0 +1,81 @@ +/* + * Hardware-specific MIB definition for + * Broadcom Home Networking Division + * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _bcmenetmib_h_ +#define _bcmenetmib_h_ + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif /* PAD */ + +/* + * EMAC MIB Registers + */ +typedef volatile struct { + uint32 tx_good_octets; + uint32 tx_good_pkts; + uint32 tx_octets; + uint32 tx_pkts; + uint32 tx_broadcast_pkts; + uint32 tx_multicast_pkts; + uint32 tx_len_64; + uint32 tx_len_65_to_127; + uint32 tx_len_128_to_255; + uint32 tx_len_256_to_511; + uint32 tx_len_512_to_1023; + uint32 tx_len_1024_to_max; + uint32 tx_jabber_pkts; + uint32 tx_oversize_pkts; + uint32 tx_fragment_pkts; + uint32 tx_underruns; + uint32 tx_total_cols; + uint32 tx_single_cols; + uint32 tx_multiple_cols; + uint32 tx_excessive_cols; + uint32 tx_late_cols; + uint32 tx_defered; + uint32 tx_carrier_lost; + uint32 tx_pause_pkts; + uint32 PAD[8]; + + uint32 rx_good_octets; + uint32 rx_good_pkts; + uint32 rx_octets; + uint32 rx_pkts; + uint32 rx_broadcast_pkts; + uint32 rx_multicast_pkts; + uint32 rx_len_64; + uint32 rx_len_65_to_127; + uint32 rx_len_128_to_255; + uint32 rx_len_256_to_511; + uint32 rx_len_512_to_1023; + uint32 rx_len_1024_to_max; + uint32 rx_jabber_pkts; + uint32 rx_oversize_pkts; + uint32 rx_fragment_pkts; + uint32 rx_missed_pkts; + uint32 rx_crc_align_errs; + uint32 rx_undersize; + uint32 rx_crc_errs; + uint32 rx_align_errs; + uint32 rx_symbol_errs; + uint32 rx_pause_pkts; + uint32 rx_nonpause_pkts; +} bcmenetmib_t; + +#endif /* _bcmenetmib_h_ */ diff --git a/package/linux/kernel-source/include/bcmenetrxh.h b/package/linux/kernel-source/include/bcmenetrxh.h new file mode 100644 index 0000000000..835e42ba4e --- /dev/null +++ b/package/linux/kernel-source/include/bcmenetrxh.h @@ -0,0 +1,43 @@ +/* + * Hardware-specific Receive Data Header for the + * Broadcom Home Networking Division + * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _bcmenetrxh_h_ +#define _bcmenetrxh_h_ + +/* + * The Ethernet MAC core returns an 8-byte Receive Frame Data Header + * with every frame consisting of + * 16bits of frame length, followed by + * 16bits of EMAC rx descriptor info, followed by 32bits of undefined. + */ +typedef volatile struct { + uint16 len; + uint16 flags; + uint16 pad[12]; +} bcmenetrxh_t; + +#define RXHDR_LEN 28 + +#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */ +#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */ +#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */ +#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */ +#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */ +#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */ +#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */ +#define RXF_CRC ((uint16)1 << 1) /* crc error */ +#define RXF_OV ((uint16)1 << 0) /* fifo overflow */ + +#endif /* _bcmenetrxh_h_ */ diff --git a/package/linux/kernel-source/include/bcmnvram.h b/package/linux/kernel-source/include/bcmnvram.h new file mode 100644 index 0000000000..3c452634e8 --- /dev/null +++ b/package/linux/kernel-source/include/bcmnvram.h @@ -0,0 +1,148 @@ +/* + * NVRAM variable manipulation + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _bcmnvram_h_ +#define _bcmnvram_h_ + +#ifndef _LANGUAGE_ASSEMBLY + +#include + +struct nvram_header { + uint32 magic; + uint32 len; + uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ + uint32 config_refresh; /* 0:15 config, 16:31 refresh */ + uint32 config_ncdl; /* ncdl values for memc */ +}; + +struct nvram_tuple { + char *name; + char *value; + struct nvram_tuple *next; +}; + +/* + * Initialize NVRAM access. May be unnecessary or undefined on certain + * platforms. + */ +extern int nvram_init(void *sbh); + +/* + * Disable NVRAM access. May be unnecessary or undefined on certain + * platforms. + */ +extern void nvram_exit(void); + +/* + * Get the value of an NVRAM variable. The pointer returned may be + * invalid after a set. + * @param name name of variable to get + * @return value of variable or NULL if undefined + */ +extern char * nvram_get(const char *name); + +/* + * Get the value of an NVRAM variable. + * @param name name of variable to get + * @return value of variable or NUL if undefined + */ +#define nvram_safe_get(name) (nvram_get(name) ? : "") + +#define nvram_safe_unset(name) ({ \ + if(nvram_get(name)) \ + nvram_unset(name); \ +}) + +#define nvram_safe_set(name, value) ({ \ + if(!nvram_get(name) || strcmp(nvram_get(name), value)) \ + nvram_set(name, value); \ +}) + +/* + * Match an NVRAM variable. + * @param name name of variable to match + * @param match value to compare against value of variable + * @return TRUE if variable is defined and its value is string equal + * to match or FALSE otherwise + */ +static INLINE int +nvram_match(char *name, char *match) { + const char *value = nvram_get(name); + return (value && !strcmp(value, match)); +} + +/* + * Inversely match an NVRAM variable. + * @param name name of variable to match + * @param match value to compare against value of variable + * @return TRUE if variable is defined and its value is not string + * equal to invmatch or FALSE otherwise + */ +static INLINE int +nvram_invmatch(char *name, char *invmatch) { + const char *value = nvram_get(name); + return (value && strcmp(value, invmatch)); +} + +/* + * Set the value of an NVRAM variable. The name and value strings are + * copied into private storage. Pointers to previously set values + * may become invalid. The new value may be immediately + * retrieved but will not be permanently stored until a commit. + * @param name name of variable to set + * @param value value of variable + * @return 0 on success and errno on failure + */ +extern int nvram_set(const char *name, const char *value); + +/* + * Unset an NVRAM variable. Pointers to previously set values + * remain valid until a set. + * @param name name of variable to unset + * @return 0 on success and errno on failure + * NOTE: use nvram_commit to commit this change to flash. + */ +extern int nvram_unset(const char *name); + +/* + * Commit NVRAM variables to permanent storage. All pointers to values + * may be invalid after a commit. + * NVRAM values are undefined after a commit. + * @return 0 on success and errno on failure + */ +extern int nvram_commit(void); + +/* + * Get all NVRAM variables (format name=value\0 ... \0\0). + * @param buf buffer to store variables + * @param count size of buffer in bytes + * @return 0 on success and errno on failure + */ +extern int nvram_getall(char *buf, int count); + +extern int file2nvram(char *filename, char *varname); +extern int nvram2file(char *varname, char *filename); + +#endif /* _LANGUAGE_ASSEMBLY */ + +#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ +#define NVRAM_VERSION 1 +#define NVRAM_HEADER_SIZE 20 +#define NVRAM_SPACE 0x8000 +#define FLASH_BASE 0xbfc00000 /* Extif core */ +#define FLASH_MIN 0x00100000 /* Minimum flash size */ +#define FLASH_MAX 0x00400000 /* Maximum flash size with extif */ + +#endif /* _bcmnvram_h_ */ diff --git a/package/linux/kernel-source/include/bcmsrom.h b/package/linux/kernel-source/include/bcmsrom.h new file mode 100755 index 0000000000..f444deed7d --- /dev/null +++ b/package/linux/kernel-source/include/bcmsrom.h @@ -0,0 +1,24 @@ +/* + * Misc useful routines to access NIC srom + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _bcmsrom_h_ +#define _bcmsrom_h_ + +extern int srom_var_init(void *sbh, uint bus, void *curmap, void *osh, char **vars, int *count); + +extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); +extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); +extern int srom_parsecis(uint8 *cis, char **vars, int *count); + +#endif /* _bcmsrom_h_ */ diff --git a/package/linux/kernel-source/include/bcmutils.h b/package/linux/kernel-source/include/bcmutils.h new file mode 100644 index 0000000000..05ad41d9d8 --- /dev/null +++ b/package/linux/kernel-source/include/bcmutils.h @@ -0,0 +1,157 @@ +/* + * Misc useful os-independent macros and functions. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _bcmutils_h_ +#define _bcmutils_h_ + +#ifndef MIN +#define MIN(a, b) (((a)<(b))?(a):(b)) +#endif + +#ifndef MAX +#define MAX(a, b) (((a)>(b))?(a):(b)) +#endif + +#define CEIL(x, y) (((x) + ((y)-1)) / (y)) +#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) +#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) +#define ISPOWEROF2(x) ((((x)-1)&(x))==0) +#define OFFSETOF(type, member) ((uint) &((type *)0)->member) +#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) + +/* bit map related macros */ +#ifndef setbit +#define NBBY 8 /* 8 bits per byte */ +#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) +#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) +#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) +#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) +#endif + +#define NBITS(type) (sizeof (type) * 8) + +#define _BCM_U 0x01 /* upper */ +#define _BCM_L 0x02 /* lower */ +#define _BCM_D 0x04 /* digit */ +#define _BCM_C 0x08 /* cntrl */ +#define _BCM_P 0x10 /* punct */ +#define _BCM_S 0x20 /* white space (space/lf/tab) */ +#define _BCM_X 0x40 /* hex digit */ +#define _BCM_SP 0x80 /* hard space (0x20) */ + +extern unsigned char bcm_ctype[]; +#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) + +#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) +#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) +#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) +#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) +#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) +#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) +#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) +#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) +#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) +#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) +#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) + +/* + * Spin at most 'us' microseconds while 'exp' is true. + * Caller should explicitly test 'exp' when this completes + * and take appropriate error action if 'exp' is still true. + */ +#define SPINWAIT(exp, us) { \ + uint countdown = (us) + 9; \ + while ((exp) && (countdown >= 10)) {\ + OSL_DELAY(10); \ + countdown -= 10; \ + } \ +} + +/* generic osl packet queue */ +struct pktq { + void *head; /* first packet to dequeue */ + void *tail; /* last packet to dequeue */ + uint len; /* number of queued packets */ + uint maxlen; /* maximum number of queued packets */ + bool priority; /* enqueue by packet priority */ +}; +#define DEFAULT_QLEN 128 + +#define pktq_len(q) ((q)->len) +#define pktq_avail(q) ((q)->maxlen - (q)->len) +#define pktq_head(q) ((q)->head) +#define pktq_full(q) ((q)->len >= (q)->maxlen) + +/* crc defines */ +#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ +#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ +#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ +#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ +#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ + +/* tag_ID/length/value_buffer tuple */ +typedef struct bcm_tlv { + uint8 id; + uint8 len; + uint8 data[1]; +} bcm_tlv_t; + +/* Check that bcm_tlv_t fits into the given buflen */ +#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len) + +/* buffer length for ethernet address from bcm_ether_ntoa() */ +#define ETHER_ADDR_STR_LEN 18 + +/* +* load 32-bit value from unaligned byte array +*/ +#ifdef IL_BIGENDIAN +#define load32_ua(a) ((((uint8 *)(a))[0] << 24) + (((uint8 *)(a))[1] << 16) + \ + (((uint8 *)(a))[2] << 8) + ((uint8 *)(a))[3]) +#else +#define load32_ua(a) ((((uint8 *)(a))[3] << 24) + (((uint8 *)(a))[2] << 16) + \ + (((uint8 *)(a))[1] << 8) + ((uint8 *)(a))[0]) +#endif + +/* externs */ +extern uint bcm_atoi(char *s); +extern uchar bcm_toupper(uchar c); +extern ulong bcm_strtoul(char *cp, char **endp, uint base); +extern void deadbeef(char *p, uint len); +extern void prhex(char *msg, uchar *buf, uint len); +extern void prpkt(char *msg, void *drv, void *p0); +extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); +extern uint pkttotlen(void *drv, void *); +extern uchar *bcm_ether_ntoa(char *ea, char *buf); +extern int bcm_ether_atoe(char *p, char *ea); +extern void bcm_mdelay(uint ms); +extern char *getvar(char *vars, char *name); +extern int getintvar(char *vars, char *name); +extern char *bcmstrstr(char *haystack, char *needle); + +extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); +extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); +extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); +extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); +extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); +extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); +extern void pktq_init(struct pktq *q, uint maxlen, bool priority); +extern bool pktenq(struct pktq *q, void *p, bool lifo); +extern void *pktdeq(struct pktq *q); + +#define bcmlog(fmt, a1, a2) +#define bcmdumplog(buf, size) *buf = '\0' +#define bcmdumplogent(buf, idx) -1 + +#endif /* _bcmutils_h_ */ diff --git a/package/linux/kernel-source/include/hnddma.h b/package/linux/kernel-source/include/hnddma.h new file mode 100644 index 0000000000..35f2095fb2 --- /dev/null +++ b/package/linux/kernel-source/include/hnddma.h @@ -0,0 +1,186 @@ +/* + * Generic Broadcom Home Networking Division (HND) DMA engine definitions. + * This supports the following chips: BCM42xx, 44xx, 47xx . + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _hnddma_h_ +#define _hnddma_h_ + +/* + * Each DMA processor consists of a transmit channel and a receive channel. + */ +typedef volatile struct { + /* transmit channel */ + uint32 xmtcontrol; /* enable, et al */ + uint32 xmtaddr; /* descriptor ring base address (4K aligned) */ + uint32 xmtptr; /* last descriptor posted to chip */ + uint32 xmtstatus; /* current active descriptor, et al */ + + /* receive channel */ + uint32 rcvcontrol; /* enable, et al */ + uint32 rcvaddr; /* descriptor ring base address (4K aligned) */ + uint32 rcvptr; /* last descriptor posted to chip */ + uint32 rcvstatus; /* current active descriptor, et al */ +} dmaregs_t; + +typedef volatile struct { + /* diag access */ + uint32 fifoaddr; /* diag address */ + uint32 fifodatalow; /* low 32bits of data */ + uint32 fifodatahigh; /* high 32bits of data */ + uint32 pad; /* reserved */ +} dmafifo_t; + +/* transmit channel control */ +#define XC_XE ((uint32)1 << 0) /* transmit enable */ +#define XC_SE ((uint32)1 << 1) /* transmit suspend request */ +#define XC_LE ((uint32)1 << 2) /* loopback enable */ +#define XC_FL ((uint32)1 << 4) /* flush request */ + +/* transmit descriptor table pointer */ +#define XP_LD_MASK 0xfff /* last valid descriptor */ + +/* transmit channel status */ +#define XS_CD_MASK 0x0fff /* current descriptor pointer */ +#define XS_XS_MASK 0xf000 /* transmit state */ +#define XS_XS_SHIFT 12 +#define XS_XS_DISABLED 0x0000 /* disabled */ +#define XS_XS_ACTIVE 0x1000 /* active */ +#define XS_XS_IDLE 0x2000 /* idle wait */ +#define XS_XS_STOPPED 0x3000 /* stopped */ +#define XS_XS_SUSP 0x4000 /* suspend pending */ +#define XS_XE_MASK 0xf0000 /* transmit errors */ +#define XS_XE_SHIFT 16 +#define XS_XE_NOERR 0x00000 /* no error */ +#define XS_XE_DPE 0x10000 /* descriptor protocol error */ +#define XS_XE_DFU 0x20000 /* data fifo underrun */ +#define XS_XE_BEBR 0x30000 /* bus error on buffer read */ +#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */ +#define XS_AD_MASK 0xfff00000 /* active descriptor */ +#define XS_AD_SHIFT 20 + +/* receive channel control */ +#define RC_RE ((uint32)1 << 0) /* receive enable */ +#define RC_RO_MASK 0xfe /* receive frame offset */ +#define RC_RO_SHIFT 1 +#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */ + +/* receive descriptor table pointer */ +#define RP_LD_MASK 0xfff /* last valid descriptor */ + +/* receive channel status */ +#define RS_CD_MASK 0x0fff /* current descriptor pointer */ +#define RS_RS_MASK 0xf000 /* receive state */ +#define RS_RS_SHIFT 12 +#define RS_RS_DISABLED 0x0000 /* disabled */ +#define RS_RS_ACTIVE 0x1000 /* active */ +#define RS_RS_IDLE 0x2000 /* idle wait */ +#define RS_RS_STOPPED 0x3000 /* reserved */ +#define RS_RE_MASK 0xf0000 /* receive errors */ +#define RS_RE_SHIFT 16 +#define RS_RE_NOERR 0x00000 /* no error */ +#define RS_RE_DPE 0x10000 /* descriptor protocol error */ +#define RS_RE_DFO 0x20000 /* data fifo overflow */ +#define RS_RE_BEBW 0x30000 /* bus error on buffer write */ +#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */ +#define RS_AD_MASK 0xfff00000 /* active descriptor */ +#define RS_AD_SHIFT 20 + +/* fifoaddr */ +#define FA_OFF_MASK 0xffff /* offset */ +#define FA_SEL_MASK 0xf0000 /* select */ +#define FA_SEL_SHIFT 16 +#define FA_SEL_XDD 0x00000 /* transmit dma data */ +#define FA_SEL_XDP 0x10000 /* transmit dma pointers */ +#define FA_SEL_RDD 0x40000 /* receive dma data */ +#define FA_SEL_RDP 0x50000 /* receive dma pointers */ +#define FA_SEL_XFD 0x80000 /* transmit fifo data */ +#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */ +#define FA_SEL_RFD 0xc0000 /* receive fifo data */ +#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */ + +/* + * DMA Descriptor + * Descriptors are only read by the hardware, never written back. + */ +typedef volatile struct { + uint32 ctrl; /* misc control bits & bufcount */ + uint32 addr; /* data buffer address */ +} dmadd_t; + +/* + * Each descriptor ring must be 4096byte aligned + * and fit within a single 4096byte page. + */ +#define DMAMAXRINGSZ 4096 +#define DMARINGALIGN 4096 + +/* control flags */ +#define CTRL_BC_MASK 0x1fff /* buffer byte count */ +#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */ +#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */ +#define CTRL_EOF ((uint32)1 << 30) /* end of frame */ +#define CTRL_SOF ((uint32)1 << 31) /* start of frame */ + +/* control flags in the range [27:20] are core-specific and not defined here */ +#define CTRL_CORE_MASK 0x0ff00000 + +/* export structure */ +typedef volatile struct { + /* rx error counters */ + uint rxgiants; /* rx giant frames */ + uint rxnobuf; /* rx out of dma descriptors */ + /* tx error counters */ + uint txnobuf; /* tx out of dma descriptors */ +} hnddma_t; + +#ifndef di_t +#define di_t void +#endif + +/* externs */ +extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs, + uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, + uint ddoffset, uint dataoffset, uint *msg_level); +extern void dma_detach(di_t *di); +extern void dma_txreset(di_t *di); +extern void dma_rxreset(di_t *di); +extern void dma_txinit(di_t *di); +extern bool dma_txenabled(di_t *di); +extern void dma_rxinit(di_t *di); +extern void dma_rxenable(di_t *di); +extern bool dma_rxenabled(di_t *di); +extern void dma_txsuspend(di_t *di); +extern void dma_txresume(di_t *di); +extern bool dma_txsuspended(di_t *di); +extern bool dma_txstopped(di_t *di); +extern bool dma_rxstopped(di_t *di); +extern int dma_txfast(di_t *di, void *p, uint32 coreflags); +extern int dma_tx(di_t *di, void *p, uint32 coreflags); +extern void dma_fifoloopbackenable(di_t *di); +extern void *dma_rx(di_t *di); +extern void dma_rxfill(di_t *di); +extern void dma_txreclaim(di_t *di, bool forceall); +extern void dma_rxreclaim(di_t *di); +extern char *dma_dump(di_t *di, char *buf); +extern char *dma_dumptx(di_t *di, char *buf); +extern char *dma_dumprx(di_t *di, char *buf); +extern uint dma_getvar(di_t *di, char *name); +extern void *dma_getnexttxp(di_t *di, bool forceall); +extern void *dma_peeknexttxp(di_t *di); +extern void *dma_getnextrxp(di_t *di, bool forceall); +extern void dma_txblock(di_t *di); +extern void dma_txunblock(di_t *di); +extern uint dma_txactive(di_t *di); +extern void dma_txrotate(di_t *di); + +#endif /* _hnddma_h_ */ diff --git a/package/linux/kernel-source/include/hndmips.h b/package/linux/kernel-source/include/hndmips.h new file mode 100644 index 0000000000..ca65c69dca --- /dev/null +++ b/package/linux/kernel-source/include/hndmips.h @@ -0,0 +1,16 @@ +/* + * Alternate include file for HND sbmips.h since CFE also ships with + * a sbmips.h. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include "sbmips.h" diff --git a/package/linux/kernel-source/include/linux_osl.h b/package/linux/kernel-source/include/linux_osl.h new file mode 100644 index 0000000000..e1a3627551 --- /dev/null +++ b/package/linux/kernel-source/include/linux_osl.h @@ -0,0 +1,343 @@ +/* + * Linux OS Independent Layer + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _linux_osl_h_ +#define _linux_osl_h_ + +#include + +/* use current 2.4.x calling conventions */ +#include + +/* assert and panic */ +#define ASSERT(exp) do {} while (0) + +/* PCMCIA attribute space access macros */ +#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) +struct pcmcia_dev { + dev_link_t link; /* PCMCIA device pointer */ + dev_node_t node; /* PCMCIA node structure */ + void *base; /* Mapped attribute memory window */ + size_t size; /* Size of window */ + void *drv; /* Driver data */ +}; +#endif +#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ + osl_pcmcia_read_attr((osh), (offset), (buf), (size)) +#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ + osl_pcmcia_write_attr((osh), (offset), (buf), (size)) +extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size); +extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size); + +/* PCI configuration space access macros */ +#define OSL_PCI_READ_CONFIG(loc, offset, size) \ + osl_pci_read_config((loc), (offset), (size)) +#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \ + osl_pci_write_config((loc), (offset), (size), (val)) +extern uint32 osl_pci_read_config(void *loc, uint size, uint offset); +extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val); + +/* OSL initialization */ +#define osl_init() do {} while (0) + +/* host/bus architecture-specific byte swap */ +#define BUS_SWAP32(v) (v) + +/* general purpose memory allocation */ +#if defined(BINOSL) + +#if defined(BCMDBG_MEM) + +#define MALLOC(size) osl_debug_malloc((size), __LINE__, __FILE__) +#define MFREE(addr, size) osl_debug_mfree((addr), (size)) +#define MALLOCED() osl_malloced() +extern void* osl_debug_malloc(uint size, int line, char* file); +extern void osl_debug_mfree(void *addr, uint size); +extern void osl_debug_memdump(void); + +#else + +#define MALLOC(size) osl_malloc((size)) +#define MFREE(addr, size) osl_mfree((addr), (size)) +#define MALLOCED() osl_malloced() + +#endif + +extern void *osl_malloc(uint size); +extern void osl_mfree(void *addr, uint size); +extern uint osl_malloced(void); + +#else + +#define MALLOC(size) kmalloc((size), GFP_ATOMIC) +#define MFREE(addr, size) kfree((addr)) +#define MALLOCED() (0) + +#endif + +/* + * BINOSL selects the slightly slower function-call-based binary compatible osl. + * Macros expand to calls to functions defined in linux_osl.c . + */ +#ifndef BINOSL + +/* string library, kernel mode */ +#define printf(fmt, args...) printk(fmt, ## args) +#include +#include + +/* register access macros */ +#define R_REG(r) ( \ + sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ + sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ + readl((volatile uint32*)(r)) \ +) +#define W_REG(r, v) do { \ + switch (sizeof(*(r))) { \ + case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ + case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ + case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ + } \ +} while (0) + +#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) +#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) + +/* bcopy, bcmp, and bzero */ +#define bcopy(src, dst, len) memcpy((dst), (src), (len)) +#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) +#define bzero(b, len) memset((b), '\0', (len)) + +/* uncached virtual address */ +#ifdef mips +#define OSL_UNCACHED(va) KSEG1ADDR((va)) +#include +#else +#define OSL_UNCACHED(va) (va) +#endif + +/* get processor cycle count */ +#if defined(mips) +#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) +#elif defined(__i386__) +#define OSL_GETCYCLES(x) rdtscl((x)) +#else +#define OSL_GETCYCLES(x) ((x) = 0) +#endif + +/* dereference an address that may cause a bus exception */ +#ifdef mips +#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) +#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") +#else +#define BUSPROBE(val, addr) get_dbe((val), (addr)) +#include +#endif +#else +#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) +#endif + +/* map/unmap physical to virtual I/O */ +#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) +#define REG_UNMAP(va) iounmap((void *)(va)) + +/* allocate/free shared (dma-able) consistent (uncached) memory */ +#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ + pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap)) +#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ + pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa)) + +/* map/unmap direction */ +#define DMA_TX PCI_DMA_TODEVICE +#define DMA_RX PCI_DMA_FROMDEVICE + +/* map/unmap shared (dma-able) memory */ +#define DMA_MAP(dev, va, size, direction, p) \ + pci_map_single((dev), (va), (size), (direction)) +#define DMA_UNMAP(dev, pa, size, direction, p) \ + pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction)) + +/* microsecond delay */ +#define OSL_DELAY(usec) udelay(usec) +#include + +/* shared (dma-able) memory access macros */ +#define R_SM(r) *(r) +#define W_SM(r, v) (*(r) = (v)) +#define BZERO_SM(r, len) memset((r), '\0', (len)) + +/* packet primitives */ +#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) +#define PKTFREE(drv, skb, send) osl_pktfree((skb)) +#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data) +#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len) +#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head)) +#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) +#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next) +#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) +#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) +#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) +#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) +#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) +#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) +#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) +#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) +#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) +#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) +#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) +extern void *osl_pktget(void *drv, uint len, bool send); +extern void osl_pktfree(void *skb); + +#else /* BINOSL */ + +/* string library */ +#ifndef LINUX_OSL +#undef printf +#define printf(fmt, args...) osl_printf((fmt), ## args) +#undef sprintf +#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) +#undef strcmp +#define strcmp(s1, s2) osl_strcmp((s1), (s2)) +#undef strncmp +#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) +#undef strlen +#define strlen(s) osl_strlen((s)) +#undef strcpy +#define strcpy(d, s) osl_strcpy((d), (s)) +#undef strncpy +#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) +#endif +extern int osl_printf(const char *format, ...); +extern int osl_sprintf(char *buf, const char *format, ...); +extern int osl_strcmp(const char *s1, const char *s2); +extern int osl_strncmp(const char *s1, const char *s2, uint n); +extern int osl_strlen(char *s); +extern char* osl_strcpy(char *d, const char *s); +extern char* osl_strncpy(char *d, const char *s, uint n); + +/* register access macros */ +#define R_REG(r) ( \ + sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ + sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ + osl_readl((volatile uint32*)(r)) \ +) +#define W_REG(r, v) do { \ + switch (sizeof(*(r))) { \ + case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ + case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ + case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ + } \ +} while (0) +#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) +#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) +extern uint8 osl_readb(volatile uint8 *r); +extern uint16 osl_readw(volatile uint16 *r); +extern uint32 osl_readl(volatile uint32 *r); +extern void osl_writeb(uint8 v, volatile uint8 *r); +extern void osl_writew(uint16 v, volatile uint16 *r); +extern void osl_writel(uint32 v, volatile uint32 *r); + +/* bcopy, bcmp, and bzero */ +extern void bcopy(const void *src, void *dst, int len); +extern int bcmp(const void *b1, const void *b2, int len); +extern void bzero(void *b, int len); + +/* uncached virtual address */ +#define OSL_UNCACHED(va) osl_uncached((va)) +extern void *osl_uncached(void *va); + +/* get processor cycle count */ +#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) +extern uint osl_getcycles(void); + +/* dereference an address that may target abort */ +#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) +extern int osl_busprobe(uint32 *val, uint32 addr); + +/* map/unmap physical to virtual */ +#define REG_MAP(pa, size) osl_reg_map((pa), (size)) +#define REG_UNMAP(va) osl_reg_unmap((va)) +extern void *osl_reg_map(uint32 pa, uint size); +extern void osl_reg_unmap(void *va); + +/* allocate/free shared (dma-able) consistent (uncached) memory */ +#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ + osl_dma_alloc_consistent((dev), (size), (pap)) +#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ + osl_dma_free_consistent((dev), (void*)(va), (size), (pa)) +extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap); +extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa); + +/* map/unmap direction */ +#define DMA_TX 1 +#define DMA_RX 2 + +/* map/unmap shared (dma-able) memory */ +#define DMA_MAP(dev, va, size, direction, p) \ + osl_dma_map((dev), (va), (size), (direction)) +#define DMA_UNMAP(dev, pa, size, direction, p) \ + osl_dma_unmap((dev), (pa), (size), (direction)) +extern uint osl_dma_map(void *dev, void *va, uint size, int direction); +extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction); + +/* microsecond delay */ +#define OSL_DELAY(usec) osl_delay((usec)) +extern void osl_delay(uint usec); + +/* shared (dma-able) memory access macros */ +#define R_SM(r) *(r) +#define W_SM(r, v) (*(r) = (v)) +#define BZERO_SM(r, len) bzero((r), (len)) + +/* packet primitives */ +#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) +#define PKTFREE(drv, skb, send) osl_pktfree((skb)) +#define PKTDATA(drv, skb) osl_pktdata((drv), (skb)) +#define PKTLEN(drv, skb) osl_pktlen((drv), (skb)) +#define PKTHEADROOM(drv, skb) osl_pktheadroom((drv), (skb)) +#define PKTTAILROOM(drv, skb) osl_pkttailroom((drv), (skb)) +#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb)) +#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) +#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len)) +#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes)) +#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes)) +#define PKTDUP(drv, skb) osl_pktdup((drv), (skb)) +#define PKTCOOKIE(skb) osl_pktcookie((skb)) +#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) +#define PKTLINK(skb) osl_pktlink((skb)) +#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) +#define PKTPRIO(skb) osl_pktprio((skb)) +#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) +extern void *osl_pktget(void *drv, uint len, bool send); +extern void osl_pktfree(void *skb); +extern uchar *osl_pktdata(void *drv, void *skb); +extern uint osl_pktlen(void *drv, void *skb); +extern uint osl_pktheadroom(void *drv, void *skb); +extern uint osl_pkttailroom(void *drv, void *skb); +extern void *osl_pktnext(void *drv, void *skb); +extern void osl_pktsetnext(void *skb, void *x); +extern void osl_pktsetlen(void *drv, void *skb, uint len); +extern uchar *osl_pktpush(void *drv, void *skb, int bytes); +extern uchar *osl_pktpull(void *drv, void *skb, int bytes); +extern void *osl_pktdup(void *drv, void *skb); +extern void *osl_pktcookie(void *skb); +extern void osl_pktsetcookie(void *skb, void *x); +extern void *osl_pktlink(void *skb); +extern void osl_pktsetlink(void *skb, void *x); +extern uint osl_pktprio(void *skb); +extern void osl_pktsetprio(void *skb, uint x); + +#endif /* BINOSL */ + +#endif /* _linux_osl_h_ */ diff --git a/package/linux/kernel-source/include/linuxver.h b/package/linux/kernel-source/include/linuxver.h new file mode 100644 index 0000000000..ed89097848 --- /dev/null +++ b/package/linux/kernel-source/include/linuxver.h @@ -0,0 +1,392 @@ +/* + * Linux-specific abstractions to gain some independence from linux kernel versions. + * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _linuxver_h_ +#define _linuxver_h_ + +#include +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) +/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ +#ifdef __UNDEF_NO_VERSION__ +#undef __NO_VERSION__ +#else +#define __NO_VERSION__ +#endif +#endif + +#if defined(MODULE) && defined(MODVERSIONS) +#include +#endif + +/* linux/malloc.h is deprecated, use linux/slab.h instead. */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) +#include +#else +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) +#include +#else +#include +#define work_struct tq_struct +#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) +#define schedule_work(_work) schedule_task((_work)) +#define flush_scheduled_work() flush_scheduled_tasks() +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) +/* Some distributions have their own 2.6.x compatibility layers */ +#ifndef IRQ_NONE +typedef void irqreturn_t; +#define IRQ_NONE +#define IRQ_HANDLED +#define IRQ_RETVAL(x) +#endif +#endif + +#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) + +#include +#include +#include +#include +#include +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)) +/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which + * does this, but it's not in 2.4 so we do our own for now. */ +static inline void +cs_error(client_handle_t handle, int func, int ret) +{ + error_info_t err = { func, ret }; + CardServices(ReportError, handle, &err); +} +#endif + +#endif /* CONFIG_PCMCIA */ + +#ifndef __exit +#define __exit +#endif +#ifndef __devexit +#define __devexit +#endif +#ifndef __devinit +#define __devinit __init +#endif +#ifndef __devinitdata +#define __devinitdata +#endif +#ifndef __devexit_p +#define __devexit_p(x) x +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) + +#define pci_get_drvdata(dev) (dev)->sysdata +#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) + +/* + * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration + */ + +struct pci_device_id { + unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ + unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ + unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ + unsigned long driver_data; /* Data private to the driver */ +}; + +struct pci_driver { + struct list_head node; + char *name; + const struct pci_device_id *id_table; /* NULL if wants all devices */ + int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ + void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ + void (*suspend)(struct pci_dev *dev); /* Device suspended */ + void (*resume)(struct pci_dev *dev); /* Device woken up */ +}; + +#define MODULE_DEVICE_TABLE(type, name) +#define PCI_ANY_ID (~0) + +/* compatpci.c */ +#define pci_module_init pci_register_driver +extern int pci_register_driver(struct pci_driver *drv); +extern void pci_unregister_driver(struct pci_driver *drv); + +#endif /* PCI registration */ + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) +#ifdef MODULE +#define module_init(x) int init_module(void) { return x(); } +#define module_exit(x) void cleanup_module(void) { x(); } +#else +#define module_init(x) __initcall(x); +#define module_exit(x) __exitcall(x); +#endif +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) +#define list_for_each(pos, head) \ + for (pos = (head)->next; pos != (head); pos = pos->next) +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) +#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) +#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) +#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) +#define pci_enable_device(dev) do { } while (0) +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) +#define net_device device +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) + +/* + * DMA mapping + * + * See linux/Documentation/DMA-mapping.txt + */ + +#ifndef PCI_DMA_TODEVICE +#define PCI_DMA_TODEVICE 1 +#define PCI_DMA_FROMDEVICE 2 +#endif + +typedef u32 dma_addr_t; + +/* Pure 2^n version of get_order */ +static inline int get_order(unsigned long size) +{ + int order; + + size = (size-1) >> (PAGE_SHIFT-1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, + dma_addr_t *dma_handle) +{ + void *ret; + int gfp = GFP_ATOMIC | GFP_DMA; + + ret = (void *)__get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_bus(ret); + } + return ret; +} +static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} +#ifdef ILSIM +extern uint pci_map_single(void *dev, void *va, uint size, int direction); +extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); +#else +#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) +#define pci_unmap_single(cookie, address, size, dir) +#endif + +#endif /* DMA mapping */ + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) + +#define dev_kfree_skb_any(a) dev_kfree_skb(a) +#define netif_down(dev) do { (dev)->start = 0; } while(0) + +/* pcmcia-cs provides its own netdevice compatibility layer */ +#ifndef _COMPAT_NETDEVICE_H + +/* + * SoftNet + * + * For pre-softnet kernels we need to tell the upper layer not to + * re-enter start_xmit() while we are in there. However softnet + * guarantees not to enter while we are in there so there is no need + * to do the netif_stop_queue() dance unless the transmit queue really + * gets stuck. This should also improve performance according to tests + * done by Aman Singla. + */ + +#define dev_kfree_skb_irq(a) dev_kfree_skb(a) +#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) +#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) + +static inline void netif_start_queue(struct net_device *dev) +{ + dev->tbusy = 0; + dev->interrupt = 0; + dev->start = 1; +} + +#define netif_queue_stopped(dev) (dev)->tbusy +#define netif_running(dev) (dev)->start + +#endif /* _COMPAT_NETDEVICE_H */ + +#define netif_device_attach(dev) netif_start_queue(dev) +#define netif_device_detach(dev) netif_stop_queue(dev) + +/* 2.4.x renamed bottom halves to tasklets */ +#define tasklet_struct tq_struct +static inline void tasklet_schedule(struct tasklet_struct *tasklet) +{ + queue_task(tasklet, &tq_immediate); + mark_bh(IMMEDIATE_BH); +} + +static inline void tasklet_init(struct tasklet_struct *tasklet, + void (*func)(unsigned long), + unsigned long data) +{ + tasklet->next = NULL; + tasklet->sync = 0; + tasklet->routine = (void (*)(void *))func; + tasklet->data = (void *)data; +} +#define tasklet_kill(tasklet) {do{} while(0);} + +/* 2.4.x introduced del_timer_sync() */ +#define del_timer_sync(timer) del_timer(timer) + +#else + +#define netif_down(dev) + +#endif /* SoftNet */ + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) + +/* + * Emit code to initialise a tq_struct's routine and data pointers + */ +#define PREPARE_TQUEUE(_tq, _routine, _data) \ + do { \ + (_tq)->routine = _routine; \ + (_tq)->data = _data; \ + } while (0) + +/* + * Emit code to initialise all of a tq_struct + */ +#define INIT_TQUEUE(_tq, _routine, _data) \ + do { \ + INIT_LIST_HEAD(&(_tq)->list); \ + (_tq)->sync = 0; \ + PREPARE_TQUEUE((_tq), (_routine), (_data)); \ + } while (0) + +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) + +/* Power management related routines */ + +static inline int +pci_save_state(struct pci_dev *dev, u32 *buffer) +{ + int i; + if (buffer) { + for (i = 0; i < 16; i++) + pci_read_config_dword(dev, i * 4,&buffer[i]); + } + return 0; +} + +static inline int +pci_restore_state(struct pci_dev *dev, u32 *buffer) +{ + int i; + + if (buffer) { + for (i = 0; i < 16; i++) + pci_write_config_dword(dev,i * 4, buffer[i]); + } + /* + * otherwise, write the context information we know from bootup. + * This works around a problem where warm-booting from Windows + * combined with a D3(hot)->D0 transition causes PCI config + * header data to be forgotten. + */ + else { + for (i = 0; i < 6; i ++) + pci_write_config_dword(dev, + PCI_BASE_ADDRESS_0 + (i * 4), + pci_resource_start(dev, i)); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + return 0; +} + +#endif /* PCI power management */ + +/* Old cp0 access macros deprecated in 2.4.19 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) +#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) +#endif + +/* Module refcount handled internally in 2.6.x */ +#ifndef SET_MODULE_OWNER +#define SET_MODULE_OWNER(dev) do {} while (0) +#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT +#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT +#else +#define OLD_MOD_INC_USE_COUNT do {} while (0) +#define OLD_MOD_DEC_USE_COUNT do {} while (0) +#endif + +#ifndef SET_NETDEV_DEV +#define SET_NETDEV_DEV(net, pdev) do {} while (0) +#endif + +#ifndef HAVE_FREE_NETDEV +#define free_netdev(dev) kfree(dev) +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) +/* struct packet_type redefined in 2.6.x */ +#define af_packet_priv data +#endif + +#endif /* _linuxver_h_ */ diff --git a/package/linux/kernel-source/include/osl.h b/package/linux/kernel-source/include/osl.h new file mode 100644 index 0000000000..f67290ecd8 --- /dev/null +++ b/package/linux/kernel-source/include/osl.h @@ -0,0 +1,38 @@ +/* + * OS Independent Layer + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _osl_h_ +#define _osl_h_ + +#ifdef V2_HAL +#include +#elif defined(linux) +#include +#elif PMON +#include +#elif defined(NDIS) +#include +#elif defined(_CFE_) +#include +#elif defined(MACOS9) +#include +#elif defined(MACOSX) +#include +#else +#error "Unsupported OSL requested" +#endif + +/* handy */ +#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) + +#endif /* _osl_h_ */ diff --git a/package/linux/kernel-source/include/pcicfg.h b/package/linux/kernel-source/include/pcicfg.h new file mode 100644 index 0000000000..e440381218 --- /dev/null +++ b/package/linux/kernel-source/include/pcicfg.h @@ -0,0 +1,369 @@ +/* + * pcicfg.h: PCI configuration constants and structures. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _h_pci_ +#define _h_pci_ + +/* The following inside ifndef's so we don't collide with NTDDK.H */ +#ifndef PCI_MAX_BUS +#define PCI_MAX_BUS 0x100 +#endif +#ifndef PCI_MAX_DEVICES +#define PCI_MAX_DEVICES 0x20 +#endif +#ifndef PCI_MAX_FUNCTION +#define PCI_MAX_FUNCTION 0x8 +#endif + +#ifndef PCI_INVALID_VENDORID +#define PCI_INVALID_VENDORID 0xffff +#endif +#ifndef PCI_INVALID_DEVICEID +#define PCI_INVALID_DEVICEID 0xffff +#endif + + +/* Convert between bus-slot-function-register and config addresses */ + +#define PCICFG_BUS_SHIFT 16 /* Bus shift */ +#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ +#define PCICFG_FUN_SHIFT 8 /* Function shift */ +#define PCICFG_OFF_SHIFT 0 /* Bus shift */ + +#define PCICFG_BUS_MASK 0xff /* Bus mask */ +#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ +#define PCICFG_FUN_MASK 7 /* Function mask */ +#define PCICFG_OFF_MASK 0xff /* Bus mask */ + +#define PCI_CONFIG_ADDR(b, s, f, o) \ + ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ + | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ + | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ + | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) + +#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) +#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) +#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) +#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) + + +/* The actual config space */ + +#define PCI_BAR_MAX 6 + +#define PCI_ROM_BAR 8 + +#define PCR_RSVDA_MAX 2 + +typedef struct _pci_config_regs { + unsigned short vendor; + unsigned short device; + unsigned short command; + unsigned short status; + unsigned char rev_id; + unsigned char prog_if; + unsigned char sub_class; + unsigned char base_class; + unsigned char cache_line_size; + unsigned char latency_timer; + unsigned char header_type; + unsigned char bist; + unsigned long base[PCI_BAR_MAX]; + unsigned long cardbus_cis; + unsigned short subsys_vendor; + unsigned short subsys_id; + unsigned long baserom; + unsigned long rsvd_a[PCR_RSVDA_MAX]; + unsigned char int_line; + unsigned char int_pin; + unsigned char min_gnt; + unsigned char max_lat; + unsigned char dev_dep[192]; +} pci_config_regs; + +#define SZPCR (sizeof (pci_config_regs)) +#define MINSZPCR 64 /* offsetof (dev_dep[0] */ + +/* A structure for the config registers is nice, but in most + * systems the config space is not memory mapped, so we need + * filed offsetts. :-( + */ +#define PCI_CFG_VID 0 +#define PCI_CFG_DID 2 +#define PCI_CFG_CMD 4 +#define PCI_CFG_STAT 6 +#define PCI_CFG_REV 8 +#define PCI_CFG_PROGIF 9 +#define PCI_CFG_SUBCL 0xa +#define PCI_CFG_BASECL 0xb +#define PCI_CFG_CLSZ 0xc +#define PCI_CFG_LATTIM 0xd +#define PCI_CFG_HDR 0xe +#define PCI_CFG_BIST 0xf +#define PCI_CFG_BAR0 0x10 +#define PCI_CFG_BAR1 0x14 +#define PCI_CFG_BAR2 0x18 +#define PCI_CFG_BAR3 0x1c +#define PCI_CFG_BAR4 0x20 +#define PCI_CFG_BAR5 0x24 +#define PCI_CFG_CIS 0x28 +#define PCI_CFG_SVID 0x2c +#define PCI_CFG_SSID 0x2e +#define PCI_CFG_ROMBAR 0x30 +#define PCI_CFG_INT 0x3c +#define PCI_CFG_PIN 0x3d +#define PCI_CFG_MINGNT 0x3e +#define PCI_CFG_MAXLAT 0x3f + +/* Classes and subclasses */ + +typedef enum { + PCI_CLASS_OLD = 0, + PCI_CLASS_DASDI, + PCI_CLASS_NET, + PCI_CLASS_DISPLAY, + PCI_CLASS_MMEDIA, + PCI_CLASS_MEMORY, + PCI_CLASS_BRIDGE, + PCI_CLASS_COMM, + PCI_CLASS_BASE, + PCI_CLASS_INPUT, + PCI_CLASS_DOCK, + PCI_CLASS_CPU, + PCI_CLASS_SERIAL, + PCI_CLASS_INTELLIGENT = 0xe, + PCI_CLASS_SATELLITE, + PCI_CLASS_CRYPT, + PCI_CLASS_DSP, + PCI_CLASS_MAX +} pci_classes; + +typedef enum { + PCI_DASDI_SCSI, + PCI_DASDI_IDE, + PCI_DASDI_FLOPPY, + PCI_DASDI_IPI, + PCI_DASDI_RAID, + PCI_DASDI_OTHER = 0x80 +} pci_dasdi_subclasses; + +typedef enum { + PCI_NET_ETHER, + PCI_NET_TOKEN, + PCI_NET_FDDI, + PCI_NET_ATM, + PCI_NET_OTHER = 0x80 +} pci_net_subclasses; + +typedef enum { + PCI_DISPLAY_VGA, + PCI_DISPLAY_XGA, + PCI_DISPLAY_3D, + PCI_DISPLAY_OTHER = 0x80 +} pci_display_subclasses; + +typedef enum { + PCI_MMEDIA_VIDEO, + PCI_MMEDIA_AUDIO, + PCI_MMEDIA_PHONE, + PCI_MEDIA_OTHER = 0x80 +} pci_mmedia_subclasses; + +typedef enum { + PCI_MEMORY_RAM, + PCI_MEMORY_FLASH, + PCI_MEMORY_OTHER = 0x80 +} pci_memory_subclasses; + +typedef enum { + PCI_BRIDGE_HOST, + PCI_BRIDGE_ISA, + PCI_BRIDGE_EISA, + PCI_BRIDGE_MC, + PCI_BRIDGE_PCI, + PCI_BRIDGE_PCMCIA, + PCI_BRIDGE_NUBUS, + PCI_BRIDGE_CARDBUS, + PCI_BRIDGE_RACEWAY, + PCI_BRIDGE_OTHER = 0x80 +} pci_bridge_subclasses; + +typedef enum { + PCI_COMM_UART, + PCI_COMM_PARALLEL, + PCI_COMM_MULTIUART, + PCI_COMM_MODEM, + PCI_COMM_OTHER = 0x80 +} pci_comm_subclasses; + +typedef enum { + PCI_BASE_PIC, + PCI_BASE_DMA, + PCI_BASE_TIMER, + PCI_BASE_RTC, + PCI_BASE_PCI_HOTPLUG, + PCI_BASE_OTHER = 0x80 +} pci_base_subclasses; + +typedef enum { + PCI_INPUT_KBD, + PCI_INPUT_PEN, + PCI_INPUT_MOUSE, + PCI_INPUT_SCANNER, + PCI_INPUT_GAMEPORT, + PCI_INPUT_OTHER = 0x80 +} pci_input_subclasses; + +typedef enum { + PCI_DOCK_GENERIC, + PCI_DOCK_OTHER = 0x80 +} pci_dock_subclasses; + +typedef enum { + PCI_CPU_386, + PCI_CPU_486, + PCI_CPU_PENTIUM, + PCI_CPU_ALPHA = 0x10, + PCI_CPU_POWERPC = 0x20, + PCI_CPU_MIPS = 0x30, + PCI_CPU_COPROC = 0x40, + PCI_CPU_OTHER = 0x80 +} pci_cpu_subclasses; + +typedef enum { + PCI_SERIAL_IEEE1394, + PCI_SERIAL_ACCESS, + PCI_SERIAL_SSA, + PCI_SERIAL_USB, + PCI_SERIAL_FIBER, + PCI_SERIAL_SMBUS, + PCI_SERIAL_OTHER = 0x80 +} pci_serial_subclasses; + +typedef enum { + PCI_INTELLIGENT_I2O, +} pci_intelligent_subclasses; + +typedef enum { + PCI_SATELLITE_TV, + PCI_SATELLITE_AUDIO, + PCI_SATELLITE_VOICE, + PCI_SATELLITE_DATA, + PCI_SATELLITE_OTHER = 0x80 +} pci_satellite_subclasses; + +typedef enum { + PCI_CRYPT_NETWORK, + PCI_CRYPT_ENTERTAINMENT, + PCI_CRYPT_OTHER = 0x80 +} pci_crypt_subclasses; + +typedef enum { + PCI_DSP_DPIO, + PCI_DSP_OTHER = 0x80 +} pci_dsp_subclasses; + +/* Header types */ +typedef enum { + PCI_HEADER_NORMAL, + PCI_HEADER_BRIDGE, + PCI_HEADER_CARDBUS +} pci_header_types; + + +/* Overlay for a PCI-to-PCI bridge */ + +#define PPB_RSVDA_MAX 2 +#define PPB_RSVDD_MAX 8 + +typedef struct _ppb_config_regs { + unsigned short vendor; + unsigned short device; + unsigned short command; + unsigned short status; + unsigned char rev_id; + unsigned char prog_if; + unsigned char sub_class; + unsigned char base_class; + unsigned char cache_line_size; + unsigned char latency_timer; + unsigned char header_type; + unsigned char bist; + unsigned long rsvd_a[PPB_RSVDA_MAX]; + unsigned char prim_bus; + unsigned char sec_bus; + unsigned char sub_bus; + unsigned char sec_lat; + unsigned char io_base; + unsigned char io_lim; + unsigned short sec_status; + unsigned short mem_base; + unsigned short mem_lim; + unsigned short pf_mem_base; + unsigned short pf_mem_lim; + unsigned long pf_mem_base_hi; + unsigned long pf_mem_lim_hi; + unsigned short io_base_hi; + unsigned short io_lim_hi; + unsigned short subsys_vendor; + unsigned short subsys_id; + unsigned long rsvd_b; + unsigned char rsvd_c; + unsigned char int_pin; + unsigned short bridge_ctrl; + unsigned char chip_ctrl; + unsigned char diag_ctrl; + unsigned short arb_ctrl; + unsigned long rsvd_d[PPB_RSVDD_MAX]; + unsigned char dev_dep[192]; +} ppb_config_regs; + +/* Eveything below is BRCM HND proprietary */ + +#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ +#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ +#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ +#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ +#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ +#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ +#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ +#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ +#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ +#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ +#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ +#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ + +#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ +#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ + +/* PCI_INT_STATUS */ +#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ + +/* PCI_INT_MASK */ +#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ +#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ +#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ + +/* PCI_SPROM_CONTROL */ +#define SPROM_BLANK 0x04 /* indicating a blank sprom */ +#define SPROM_WRITEEN 0x10 /* sprom write enable */ +#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ + +#define SPROM_SIZE 256 /* sprom size in 16-bit */ +#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ + +/* PCI_CFG_CMD_STAT */ +#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ + +#endif diff --git a/package/linux/kernel-source/include/proto/802.11.h b/package/linux/kernel-source/include/proto/802.11.h new file mode 100644 index 0000000000..ea57850ce5 --- /dev/null +++ b/package/linux/kernel-source/include/proto/802.11.h @@ -0,0 +1,852 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Fundamental types and constants relating to 802.11 + * + * $Id$ + */ + +#ifndef _802_11_H_ +#define _802_11_H_ + +#ifndef _TYPEDEFS_H_ +#include +#endif + +#ifndef _NET_ETHERNET_H_ +#include +#endif + +/* enable structure packing */ +#if !defined(__GNUC__) +#pragma pack(1) +#endif + +/* some platforms require stronger medicine */ +#if defined(__GNUC__) +#define PACKED __attribute__((packed)) +#else +#define PACKED +#endif + + +#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ + +/* Generic 802.11 frame constants */ +#define DOT11_A3_HDR_LEN 24 +#define DOT11_A4_HDR_LEN 30 +#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN +#define DOT11_FCS_LEN 4 +#define DOT11_ICV_LEN 4 +#define DOT11_ICV_AES_LEN 8 +#define DOT11_QOS_LEN 2 + +#define DOT11_KEY_INDEX_SHIFT 6 +#define DOT11_IV_LEN 4 +#define DOT11_IV_TKIP_LEN 8 +#define DOT11_IV_AES_OCB_LEN 4 +#define DOT11_IV_AES_CCM_LEN 8 + +/* Includes MIC */ +#define DOT11_MAX_MPDU_BODY_LEN 2304 +/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */ +#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \ + DOT11_QOS_LEN + \ + DOT11_IV_AES_CCM_LEN + \ + DOT11_MAX_MPDU_BODY_LEN + \ + DOT11_ICV_LEN + \ + DOT11_FCS_LEN) + +#define DOT11_MAX_SSID_LEN 32 + +/* dot11RTSThreshold */ +#define DOT11_DEFAULT_RTS_LEN 2347 +#define DOT11_MAX_RTS_LEN 2347 + +/* dot11FragmentationThreshold */ +#define DOT11_MIN_FRAG_LEN 256 +#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ +#define DOT11_DEFAULT_FRAG_LEN 2346 + +/* dot11BeaconPeriod */ +#define DOT11_MIN_BEACON_PERIOD 1 +#define DOT11_MAX_BEACON_PERIOD 0xFFFF + +/* dot11DTIMPeriod */ +#define DOT11_MIN_DTIM_PERIOD 1 +#define DOT11_MAX_DTIM_PERIOD 0xFF + +/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ +#define DOT11_LLC_SNAP_HDR_LEN 8 +#define DOT11_OUI_LEN 3 +struct dot11_llc_snap_header { + uint8 dsap; /* always 0xAA */ + uint8 ssap; /* always 0xAA */ + uint8 ctl; /* always 0x03 */ + uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 + Bridge-Tunnel: 0x00 0x00 0xF8 */ + uint16 type; /* ethertype */ +} PACKED; + +/* RFC1042 header used by 802.11 per 802.1H */ +#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) + +/* Generic 802.11 MAC header */ +/* + * N.B.: This struct reflects the full 4 address 802.11 MAC header. + * The fields are defined such that the shorter 1, 2, and 3 + * address headers just use the first k fields. + */ +struct dot11_header { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr a1; /* address 1 */ + struct ether_addr a2; /* address 2 */ + struct ether_addr a3; /* address 3 */ + uint16 seq; /* sequence control */ + struct ether_addr a4; /* address 4 */ +} PACKED; + +/* Control frames */ + +struct dot11_rts_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ + struct ether_addr ta; /* transmitter address */ +} PACKED; +#define DOT11_RTS_LEN 16 + +struct dot11_cts_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ +} PACKED; +#define DOT11_CTS_LEN 10 + +struct dot11_ack_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ +} PACKED; +#define DOT11_ACK_LEN 10 + +struct dot11_ps_poll_frame { + uint16 fc; /* frame control */ + uint16 durid; /* AID */ + struct ether_addr bssid; /* receiver address, STA in AP */ + struct ether_addr ta; /* transmitter address */ +} PACKED; +#define DOT11_PS_POLL_LEN 16 + +struct dot11_cf_end_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ + struct ether_addr bssid; /* transmitter address, STA in AP */ +} PACKED; +#define DOT11_CS_END_LEN 16 + +/* Management frame header */ +struct dot11_management_header { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr da; /* receiver address */ + struct ether_addr sa; /* transmitter address */ + struct ether_addr bssid; /* BSS ID */ + uint16 seq; /* sequence control */ +} PACKED; +#define DOT11_MGMT_HDR_LEN 24 + +/* Management frame payloads */ + +struct dot11_bcn_prb { + uint32 timestamp[2]; + uint16 beacon_interval; + uint16 capability; +} PACKED; +#define DOT11_BCN_PRB_LEN 12 + +struct dot11_auth { + uint16 alg; /* algorithm */ + uint16 seq; /* sequence control */ + uint16 status; /* status code */ +} PACKED; +#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ + +struct dot11_assoc_req { + uint16 capability; /* capability information */ + uint16 listen; /* listen interval */ +} PACKED; + +struct dot11_assoc_resp { + uint16 capability; /* capability information */ + uint16 status; /* status code */ + uint16 aid; /* association ID */ +} PACKED; + +struct dot11_action_measure { + uint8 category; + uint8 action; + uint8 token; + uint8 data[1]; +} PACKED; +#define DOT11_ACTION_MEASURE_LEN 3 + +/************** + 802.11h related definitions. +**************/ +typedef struct { + uint8 id; + uint8 len; + uint8 power; +} dot11_power_cnst_t; + +typedef struct { + uint8 min; + uint8 max; +} dot11_power_cap_t; + +typedef struct { + uint8 id; + uint8 len; + uint8 tx_pwr; + uint8 margin; +} dot11_tpc_rep_t; +#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ + +typedef struct { + uint8 id; + uint8 len; + uint8 first_channel; + uint8 num_channels; +} dot11_supp_channels_t; + +struct dot11_channel_switch { + uint8 id; + uint8 len; + uint8 mode; + uint8 channel; + uint8 count; +} PACKED; +typedef struct dot11_channel_switch dot11_channel_switch_t; + +/* 802.11h Measurement Request/Report IEs */ +/* Measurement Type field */ +#define DOT11_MEASURE_TYPE_BASIC 0 +#define DOT11_MEASURE_TYPE_CCA 1 +#define DOT11_MEASURE_TYPE_RPI 2 + +/* Measurement Mode field */ + +/* Measurement Request Modes */ +#define DOT11_MEASURE_MODE_ENABLE (1<<1) +#define DOT11_MEASURE_MODE_REQUEST (1<<2) +#define DOT11_MEASURE_MODE_REPORT (1<<3) +/* Measurement Report Modes */ +#define DOT11_MEASURE_MODE_LATE (1<<0) +#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) +#define DOT11_MEASURE_MODE_REFUSED (1<<2) +/* Basic Measurement Map bits */ +#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) +#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) +#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) +#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) +#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) + +typedef struct { + uint8 id; + uint8 len; + uint8 token; + uint8 mode; + uint8 type; + uint8 channel; + uint8 start_time[8]; + uint16 duration; +} dot11_meas_req_t; +#define DOT11_MNG_IE_MREQ_LEN 14 +/* length of Measure Request IE data not including variable len */ +#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 + +struct dot11_meas_rep { + uint8 id; + uint8 len; + uint8 token; + uint8 mode; + uint8 type; + union + { + struct { + uint8 channel; + uint8 start_time[8]; + uint16 duration; + uint8 map; + } PACKED basic; + uint8 data[1]; + } PACKED rep; +} PACKED; +typedef struct dot11_meas_rep dot11_meas_rep_t; + +/* length of Measure Report IE data not including variable len */ +#define DOT11_MNG_IE_MREP_FIXED_LEN 3 + +struct dot11_meas_rep_basic { + uint8 channel; + uint8 start_time[8]; + uint16 duration; + uint8 map; +} PACKED; +typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; +#define DOT11_MEASURE_BASIC_REP_LEN 12 + +struct dot11_quiet { + uint8 id; + uint8 len; + uint8 count; /* TBTTs until beacon interval in quiet starts */ + uint8 period; /* Beacon intervals between periodic quiet periods ? */ + uint16 duration;/* Length of quiet period, in TU's */ + uint16 offset; /* TU's offset from TBTT in Count field */ +} PACKED; +typedef struct dot11_quiet dot11_quiet_t; + +typedef struct { + uint8 channel; + uint8 map; +} chan_map_tuple_t; + +typedef struct { + uint8 id; + uint8 len; + uint8 eaddr[ETHER_ADDR_LEN]; + uint8 interval; + chan_map_tuple_t map[1]; +} dot11_ibss_dfs_t; + +/* WME Elements */ +#define WME_OUI "\x00\x50\xf2" +#define WME_VER 1 +#define WME_TYPE 2 +#define WME_SUBTYPE_IE 0 /* Information Element */ +#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */ +#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */ + +/* WME Access Category Indices (ACIs) */ +#define AC_BE 0 /* Best Effort */ +#define AC_BK 1 /* Background */ +#define AC_VI 2 /* Video */ +#define AC_VO 3 /* Voice */ +#define AC_MAX 4 + +/* WME Information Element (IE) */ +struct wme_ie { + uint8 oui[3]; + uint8 type; + uint8 subtype; + uint8 version; + uint8 acinfo; +} PACKED; +typedef struct wme_ie wme_ie_t; +#define WME_IE_LEN 7 + +struct wme_acparam { + uint8 ACI; + uint8 ECW; + uint16 TXOP; /* stored in network order (ls octet first) */ +} PACKED; +typedef struct wme_acparam wme_acparam_t; + +/* WME Parameter Element (PE) */ +struct wme_params { + uint8 oui[3]; + uint8 type; + uint8 subtype; + uint8 version; + uint8 acinfo; + uint8 rsvd; + wme_acparam_t acparam[4]; +} PACKED; +typedef struct wme_params wme_params_t; +#define WME_PARAMS_IE_LEN 24 + +/* acinfo */ +#define WME_COUNT_MASK 0x0f +/* ACI */ +#define WME_AIFS_MASK 0x0f +#define WME_ACM_MASK 0x10 +#define WME_ACI_MASK 0x60 +#define WME_ACI_SHIFT 5 +/* ECW */ +#define WME_CWMIN_MASK 0x0f +#define WME_CWMAX_MASK 0xf0 +#define WME_CWMAX_SHIFT 4 + +#define WME_TXOP_UNITS 32 + +/* WME Traffic Specification (TSPEC) element */ +#define WME_SUBTYPE_TSPEC 2 +#define WME_TSPEC_HDR_LEN 2 +#define WME_TSPEC_BODY_OFF 2 +struct wme_tspec { + uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */ + uint8 type; /* WME_TYPE */ + uint8 subtype; /* WME_SUBTYPE_TSPEC */ + uint8 version; /* WME_VERSION */ + uint16 ts_info; /* TS Info */ + uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */ + uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */ + uint32 min_service_interval; /* Minimum Service Interval (us) */ + uint32 max_service_interval; /* Maximum Service Interval (us) */ + uint32 inactivity_interval; /* Inactivity Interval (us) */ + uint32 service_start; /* Service Start Time (us) */ + uint32 min_rate; /* Minimum Data Rate (bps) */ + uint32 mean_rate; /* Mean Data Rate (bps) */ + uint32 max_burst_size; /* Maximum Burst Size (bytes) */ + uint32 min_phy_rate; /* Minimum PHY Rate (bps) */ + uint32 peak_rate; /* Peak Data Rate (bps) */ + uint32 delay_bound; /* Delay Bound (us) */ + uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */ + uint16 medium_time; /* Medium Time (32 us/s periods) */ +} PACKED; +typedef struct wme_tspec wme_tspec_t; +#define WME_TSPEC_LEN 56 /* not including 2-byte header */ + +/* ts_info */ +/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */ +#define TS_INFO_PRIO_SHIFT_HI 11 +#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI) +#define TS_INFO_PRIO_SHIFT_LO 1 +#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO) +#define TS_INFO_CONTENTION_SHIFT 7 +#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) +#define TS_INFO_DIRECTION_SHIFT 5 +#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) +#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) +#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) +#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) + +/* nom_msdu_size */ +#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */ +#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */ + +/* surplus_bandwidth */ +/* Represented as 3 bits of integer, binary point, 13 bits fraction */ +#define INTEGER_SHIFT 13 +#define FRACTION_MASK 0x1FFF + +/* Management Notification Frame */ +struct dot11_management_notification { + uint8 category; /* DOT11_ACTION_NOTIFICATION */ + uint8 action; + uint8 token; + uint8 status; + uint8 data[1]; /* Elements */ +} PACKED; +#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */ + +/* WME Action Codes */ +#define WME_SETUP_REQUEST 0 +#define WME_SETUP_RESPONSE 1 +#define WME_TEARDOWN 2 + +/* WME Setup Response Status Codes */ +#define WME_ADMISSION_ACCEPTED 0 +#define WME_INVALID_PARAMETERS 1 +#define WME_ADMISSION_REFUSED 3 + +/* Macro to take a pointer to a beacon or probe response + * header and return the char* pointer to the SSID info element + */ +#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) + +/* Authentication frame payload constants */ +#define DOT11_OPEN_SYSTEM 0 +#define DOT11_SHARED_KEY 1 +#define DOT11_CHALLENGE_LEN 128 + +/* Frame control macros */ +#define FC_PVER_MASK 0x3 +#define FC_PVER_SHIFT 0 +#define FC_TYPE_MASK 0xC +#define FC_TYPE_SHIFT 2 +#define FC_SUBTYPE_MASK 0xF0 +#define FC_SUBTYPE_SHIFT 4 +#define FC_TODS 0x100 +#define FC_TODS_SHIFT 8 +#define FC_FROMDS 0x200 +#define FC_FROMDS_SHIFT 9 +#define FC_MOREFRAG 0x400 +#define FC_MOREFRAG_SHIFT 10 +#define FC_RETRY 0x800 +#define FC_RETRY_SHIFT 11 +#define FC_PM 0x1000 +#define FC_PM_SHIFT 12 +#define FC_MOREDATA 0x2000 +#define FC_MOREDATA_SHIFT 13 +#define FC_WEP 0x4000 +#define FC_WEP_SHIFT 14 +#define FC_ORDER 0x8000 +#define FC_ORDER_SHIFT 15 + +/* sequence control macros */ +#define SEQNUM_SHIFT 4 +#define FRAGNUM_MASK 0xF + +/* Frame Control type/subtype defs */ + +/* FC Types */ +#define FC_TYPE_MNG 0 +#define FC_TYPE_CTL 1 +#define FC_TYPE_DATA 2 + +/* Management Subtypes */ +#define FC_SUBTYPE_ASSOC_REQ 0 +#define FC_SUBTYPE_ASSOC_RESP 1 +#define FC_SUBTYPE_REASSOC_REQ 2 +#define FC_SUBTYPE_REASSOC_RESP 3 +#define FC_SUBTYPE_PROBE_REQ 4 +#define FC_SUBTYPE_PROBE_RESP 5 +#define FC_SUBTYPE_BEACON 8 +#define FC_SUBTYPE_ATIM 9 +#define FC_SUBTYPE_DISASSOC 10 +#define FC_SUBTYPE_AUTH 11 +#define FC_SUBTYPE_DEAUTH 12 +#define FC_SUBTYPE_ACTION 13 + +/* Control Subtypes */ +#define FC_SUBTYPE_PS_POLL 10 +#define FC_SUBTYPE_RTS 11 +#define FC_SUBTYPE_CTS 12 +#define FC_SUBTYPE_ACK 13 +#define FC_SUBTYPE_CF_END 14 +#define FC_SUBTYPE_CF_END_ACK 15 + +/* Data Subtypes */ +#define FC_SUBTYPE_DATA 0 +#define FC_SUBTYPE_DATA_CF_ACK 1 +#define FC_SUBTYPE_DATA_CF_POLL 2 +#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 +#define FC_SUBTYPE_NULL 4 +#define FC_SUBTYPE_CF_ACK 5 +#define FC_SUBTYPE_CF_POLL 6 +#define FC_SUBTYPE_CF_ACK_POLL 7 +#define FC_SUBTYPE_QOS_DATA 8 +#define FC_SUBTYPE_QOS_NULL 12 + +/* type-subtype combos */ +#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) + +#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) + +#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) +#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) +#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) +#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) +#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) +#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) +#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) +#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) +#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) +#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) +#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) + +#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) +#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) +#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) +#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) +#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) +#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) + +#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) +#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) +#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) +#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) +#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) + +/* QoS Control Field */ + +/* 802.1D Tag */ +#define QOS_PRIO_SHIFT 0 +#define QOS_PRIO_MASK 0x0007 +#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) + +/* Ack Policy (0 means Acknowledge) */ +#define QOS_ACK_SHIFT 5 +#define QOS_ACK_MASK 0x0060 +#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) + +/* Management Frames */ + +/* Management Frame Constants */ + +/* Fixed fields */ +#define DOT11_MNG_AUTH_ALGO_LEN 2 +#define DOT11_MNG_AUTH_SEQ_LEN 2 +#define DOT11_MNG_BEACON_INT_LEN 2 +#define DOT11_MNG_CAP_LEN 2 +#define DOT11_MNG_AP_ADDR_LEN 6 +#define DOT11_MNG_LISTEN_INT_LEN 2 +#define DOT11_MNG_REASON_LEN 2 +#define DOT11_MNG_AID_LEN 2 +#define DOT11_MNG_STATUS_LEN 2 +#define DOT11_MNG_TIMESTAMP_LEN 8 + +/* DUR/ID field in assoc resp is 0xc000 | AID */ +#define DOT11_AID_MASK 0x3fff + +/* Reason Codes */ +#define DOT11_RC_RESERVED 0 +#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ +#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ +#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is + leaving (or has left) IBSS or ESS */ +#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ +#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle + all currently associated stations */ +#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from + nonauthenticated station */ +#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from + nonassociated station */ +#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is + leaving (or has left) BSS */ +#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is + not authenticated with responding station */ +#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ + +/* Status Codes */ +#define DOT11_STATUS_SUCCESS 0 /* Successful */ +#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ +#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities + in the Capability Information field */ +#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to + confirm that association exists */ +#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside + the scope of this standard */ +#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the + specified authentication algorithm */ +#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with + authentication transaction sequence number + out of expected sequence */ +#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ +#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting + for next frame in sequence */ +#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to + handle additional associated stations */ +#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station + not supporting all of the data rates in the + BSSBasicRateSet parameter */ +#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station + not supporting the Short Preamble option */ +#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station + not supporting the PBCC Modulation option */ +#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station + not supporting the Channel Agility option */ +#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management + capability is required. */ +#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the + Power Cap element is unacceptable. */ +#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the + Supported Channel element is unacceptable */ +#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station + not supporting the Short Slot Time option */ +#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station + not supporting the ER-PBCC Modulation option */ +#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station + not supporting the DSS-OFDM option */ + +/* Info Elts, length of INFORMATION portion of Info Elts */ +#define DOT11_MNG_DS_PARAM_LEN 1 +#define DOT11_MNG_IBSS_PARAM_LEN 2 + +/* TIM Info element has 3 bytes fixed info in INFORMATION field, + * followed by 1 to 251 bytes of Partial Virtual Bitmap */ +#define DOT11_MNG_TIM_FIXED_LEN 3 +#define DOT11_MNG_TIM_DTIM_COUNT 0 +#define DOT11_MNG_TIM_DTIM_PERIOD 1 +#define DOT11_MNG_TIM_BITMAP_CTL 2 +#define DOT11_MNG_TIM_PVB 3 + +/* TLV defines */ +#define TLV_TAG_OFF 0 +#define TLV_LEN_OFF 1 +#define TLV_HDR_LEN 2 +#define TLV_BODY_OFF 2 + +/* Management Frame Information Element IDs */ +#define DOT11_MNG_SSID_ID 0 +#define DOT11_MNG_RATES_ID 1 +#define DOT11_MNG_FH_PARMS_ID 2 +#define DOT11_MNG_DS_PARMS_ID 3 +#define DOT11_MNG_CF_PARMS_ID 4 +#define DOT11_MNG_TIM_ID 5 +#define DOT11_MNG_IBSS_PARMS_ID 6 +#define DOT11_MNG_COUNTRY_ID 7 +#define DOT11_MNG_HOPPING_PARMS_ID 8 +#define DOT11_MNG_HOPPING_TABLE_ID 9 +#define DOT11_MNG_REQUEST_ID 10 +#define DOT11_MNG_CHALLENGE_ID 16 +#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ +#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ +#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ +#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ +#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ +#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ +#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ +#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ +#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ +#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ +#define DOT11_MNG_ERP_ID 42 +#define DOT11_MNG_NONERP_ID 47 +#define DOT11_MNG_EXT_RATES_ID 50 +#define DOT11_MNG_WPA_ID 221 +#define DOT11_MNG_PROPR_ID 221 + +/* ERP info element bit values */ +#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ +#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ +#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ +#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ + +/* Capability Information Field */ +#define DOT11_CAP_ESS 0x0001 +#define DOT11_CAP_IBSS 0x0002 +#define DOT11_CAP_POLLABLE 0x0004 +#define DOT11_CAP_POLL_RQ 0x0008 +#define DOT11_CAP_PRIVACY 0x0010 +#define DOT11_CAP_SHORT 0x0020 +#define DOT11_CAP_PBCC 0x0040 +#define DOT11_CAP_AGILITY 0x0080 +#define DOT11_CAP_SPECTRUM 0x0100 +#define DOT11_CAP_SHORTSLOT 0x0400 +#define DOT11_CAP_CCK_OFDM 0x2000 + +/* Action Frame Constants */ +#define DOT11_ACTION_CAT_ERR_MASK 0x80 +#define DOT11_ACTION_CAT_SPECT_MNG 0x00 +#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */ + +#define DOT11_ACTION_ID_M_REQ 0 +#define DOT11_ACTION_ID_M_REP 1 +#define DOT11_ACTION_ID_TPC_REQ 2 +#define DOT11_ACTION_ID_TPC_REP 3 +#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 + +/* MLME Enumerations */ +#define DOT11_BSSTYPE_INFRASTRUCTURE 0 +#define DOT11_BSSTYPE_INDEPENDENT 1 +#define DOT11_BSSTYPE_ANY 2 +#define DOT11_SCANTYPE_ACTIVE 0 +#define DOT11_SCANTYPE_PASSIVE 1 + +/* 802.11 A PHY constants */ +#define APHY_SLOT_TIME 9 +#define APHY_SIFS_TIME 16 +#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) +#define APHY_PREAMBLE_TIME 16 +#define APHY_SIGNAL_TIME 4 +#define APHY_SYMBOL_TIME 4 +#define APHY_SERVICE_NBITS 16 +#define APHY_TAIL_NBITS 6 +#define APHY_CWMIN 15 + +/* 802.11 B PHY constants */ +#define BPHY_SLOT_TIME 20 +#define BPHY_SIFS_TIME 10 +#define BPHY_DIFS_TIME 50 +#define BPHY_PLCP_TIME 192 +#define BPHY_PLCP_SHORT_TIME 96 +#define BPHY_CWMIN 31 + +/* 802.11 G constants */ +#define DOT11_OFDM_SIGNAL_EXTENSION 6 + +#define PHY_CWMAX 1023 + +#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ + +/* dot11Counters Table - 802.11 spec., Annex D */ +typedef struct d11cnt { + uint32 txfrag; /* dot11TransmittedFragmentCount */ + uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ + uint32 txfail; /* dot11FailedCount */ + uint32 txretry; /* dot11RetryCount */ + uint32 txretrie; /* dot11MultipleRetryCount */ + uint32 rxdup; /* dot11FrameduplicateCount */ + uint32 txrts; /* dot11RTSSuccessCount */ + uint32 txnocts; /* dot11RTSFailureCount */ + uint32 txnoack; /* dot11ACKFailureCount */ + uint32 rxfrag; /* dot11ReceivedFragmentCount */ + uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ + uint32 rxcrc; /* dot11FCSErrorCount */ + uint32 txfrmsnt; /* dot11TransmittedFrameCount */ + uint32 rxundec; /* dot11WEPUndecryptableCount */ +} d11cnt_t; + +/* BRCM OUI */ +#define BRCM_OUI "\x00\x10\x18" + +/* BRCM info element */ +struct brcm_ie { + uchar id; + uchar len; + uchar oui[3]; + uchar ver; + uchar assoc; /* # of assoc STAs */ + uchar flags; /* misc flags */ +} PACKED; +#define BRCM_IE_LEN 8 +typedef struct brcm_ie brcm_ie_t; +#define BRCM_IE_VER 1 + +/* brcm_ie flags */ +#define BRF_ABCAP 0x1 /* afterburner capable */ +#define BRF_ABRQRD 0x2 /* afterburner requested */ + +/* WPA definitions */ +#define WPA_VERSION 1 +#define WPA_OUI "\x00\x50\xF2" + +#define WPA_OUI_LEN 3 + +/* WPA authentication modes */ +#define WPA_AUTH_NONE 0 /* None */ +#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ +#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ +#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ + +#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ + (auth) == WPA_AUTH_UNSPECIFIED || \ + (auth) == WPA_AUTH_PSK) + + +/* Key related defines */ +#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */ +#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ +#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ +#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ + +#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ +#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ +#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ +#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ +#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ +#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ +#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ +#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ +#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ +#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ +#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ +#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ +#define AES_KEY_SIZE 16 /* size of AES key */ + +#undef PACKED +#if !defined(__GNUC__) +#pragma pack() +#endif + +#endif /* _802_11_H_ */ diff --git a/package/linux/kernel-source/include/proto/ethernet.h b/package/linux/kernel-source/include/proto/ethernet.h new file mode 100644 index 0000000000..0089ec78d9 --- /dev/null +++ b/package/linux/kernel-source/include/proto/ethernet.h @@ -0,0 +1,164 @@ +/******************************************************************************* + * $Id$ + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. + ******************************************************************************/ + +#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ +#define _NET_ETHERNET_H_ + +#ifndef _TYPEDEFS_H_ +#include "typedefs.h" +#endif + +#if defined(__GNUC__) +#define PACKED __attribute__((packed)) +#else +#define PACKED +#endif + +/* + * The number of bytes in an ethernet (MAC) address. + */ +#define ETHER_ADDR_LEN 6 + +/* + * The number of bytes in the type field. + */ +#define ETHER_TYPE_LEN 2 + +/* + * The number of bytes in the trailing CRC field. + */ +#define ETHER_CRC_LEN 4 + +/* + * The length of the combined header. + */ +#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) + +/* + * The minimum packet length. + */ +#define ETHER_MIN_LEN 64 + +/* + * The minimum packet user data length. + */ +#define ETHER_MIN_DATA 46 + +/* + * The maximum packet length. + */ +#define ETHER_MAX_LEN 1518 + +/* + * The maximum packet user data length. + */ +#define ETHER_MAX_DATA 1500 + +/* + * Used to uniquely identify a 802.1q VLAN-tagged header. + */ +#define VLAN_TAG 0x8100 + +/* + * Located after dest & src address in ether header. + */ +#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) + +/* + * 4 bytes of vlan field info. + */ +#define VLAN_FIELDS_SIZE 4 + +/* location of bits in 16-bit vlan fields */ +#define VLAN_PRI_SHIFT 13 /* user priority */ +#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */ + +/* 3 bits of priority */ +#define VLAN_PRI_MASK 7 +/* 12 bits of vlan identfier (VID) */ +#define VLAN_VID_MASK 0xFFF /* VLAN identifier (VID) field */ + +struct vlan_tags { + uint16 tag_type; /* 0x8100 for VLAN */ + uint16 tag_control; /* prio | cfi | vid */ +} PACKED ; + +/* 802.1X ethertype */ + +#define ETHER_TYPE_IP 0x0800 /* IP */ +#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */ +#define ETHER_TYPE_802_1X 0x888e /* 802.1x */ + +#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4byte subtype follows ethertype */ +#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */ + +/* + * A macro to validate a length with + */ +#define ETHER_IS_VALID_LEN(foo) \ + ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) + + +#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ +/* + * Structure of a 10Mb/s Ethernet header. + */ +struct ether_header { + uint8 ether_dhost[ETHER_ADDR_LEN]; + uint8 ether_shost[ETHER_ADDR_LEN]; + uint16 ether_type; +} PACKED ; + +/* + * Structure of a 48-bit Ethernet address. + */ +struct ether_addr { + uint8 octet[ETHER_ADDR_LEN]; +} PACKED ; +#endif + +/* + * Takes a pointer, returns true if a 48-bit multicast address + * (including broadcast, since it is all ones) + */ +#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) + +/* + * Takes a pointer, returns true if a 48-bit broadcast (all ones) + */ +#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ + ((uint8 *)(ea))[1] & \ + ((uint8 *)(ea))[2] & \ + ((uint8 *)(ea))[3] & \ + ((uint8 *)(ea))[4] & \ + ((uint8 *)(ea))[5]) == 0xff) + +static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; + +/* + * Takes a pointer, returns true if a 48-bit null address (all zeros) + */ +#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ + ((uint8 *)(ea))[1] | \ + ((uint8 *)(ea))[2] | \ + ((uint8 *)(ea))[3] | \ + ((uint8 *)(ea))[4] | \ + ((uint8 *)(ea))[5]) == 0) + +/* Differentiated Services Codepoint - lower 6 bits of tos in iphdr */ +#define DSCP_PRI_MASK 0x3F /* bits 0-6 */ +#define DSCP_WME_PRI_MASK 0x38 /* bits 3-6 */ +#define DSCP_WME_PRI_SHIFT 3 + +#undef PACKED + +#endif /* _NET_ETHERNET_H_ */ diff --git a/package/linux/kernel-source/include/sbchipc.h b/package/linux/kernel-source/include/sbchipc.h new file mode 100644 index 0000000000..7f37b2a6fd --- /dev/null +++ b/package/linux/kernel-source/include/sbchipc.h @@ -0,0 +1,367 @@ +/* + * SiliconBackplane Chipcommon core hardware definitions. + * + * The chipcommon core provides chip identification, SB control, + * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, + * gpio interface, extbus, and support for serial and parallel flashes. + * + * $Id$ + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + */ + +#ifndef _SBCHIPC_H +#define _SBCHIPC_H + + +#ifndef _LANGUAGE_ASSEMBLY + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif /* PAD */ + +typedef volatile struct { + uint32 chipid; /* 0x0 */ + uint32 capabilities; + uint32 corecontrol; /* corerev >= 1 */ + uint32 bist; + + /* OTP */ + uint32 otpstatus; /* 0x10, corerev >= 10 */ + uint32 otpcontrol; + uint32 otpprog; + uint32 PAD; + + /* Interrupt control */ + uint32 intstatus; /* 0x20 */ + uint32 intmask; + uint32 PAD[2]; + + /* Jtag Master */ + uint32 jtagcmd; /* 0x30, rev >= 10 */ + uint32 jtagir; + uint32 jtagdr; + uint32 jtagctrl; + + /* serial flash interface registers */ + uint32 flashcontrol; /* 0x40 */ + uint32 flashaddress; + uint32 flashdata; + uint32 PAD[1]; + + /* Silicon backplane configuration broadcast control */ + uint32 broadcastaddress; /* 0x50 */ + uint32 broadcastdata; + uint32 PAD[2]; + + /* gpio - cleared only by power-on-reset */ + uint32 gpioin; /* 0x60 */ + uint32 gpioout; + uint32 gpioouten; + uint32 gpiocontrol; + uint32 gpiointpolarity; + uint32 gpiointmask; + uint32 PAD[2]; + + /* Watchdog timer */ + uint32 watchdog; /* 0x80 */ + uint32 PAD[3]; + + /* clock control */ + uint32 clockcontrol_n; /* 0x90 */ + uint32 clockcontrol_sb; /* aka m0 */ + uint32 clockcontrol_pci; /* aka m1 */ + uint32 clockcontrol_m2; /* mii/uart/mipsref */ + uint32 clockcontrol_mips; /* aka m3 */ + uint32 clkdiv; /* corerev >= 3 */ + uint32 PAD[2]; + + /* pll delay registers (corerev >= 4) */ + uint32 pll_on_delay; /* 0xb0 */ + uint32 fref_sel_delay; + uint32 slow_clk_ctl; /* 5 < corerev < 10 */ + uint32 PAD[1]; + + /* Instaclock registers (corerev >= 10) */ + uint32 system_clk_ctl; /* 0xc0 */ + uint32 clkstatestretch; + uint32 PAD[14]; + + /* ExtBus control registers (corerev >= 3) */ + uint32 pcmcia_config; /* 0x100 */ + uint32 pcmcia_memwait; + uint32 pcmcia_attrwait; + uint32 pcmcia_iowait; + uint32 ide_config; + uint32 ide_memwait; + uint32 ide_attrwait; + uint32 ide_iowait; + uint32 prog_config; + uint32 prog_waitcount; + uint32 flash_config; + uint32 flash_waitcount; + uint32 PAD[116]; + + /* uarts */ + uint8 uart0data; /* 0x300 */ + uint8 uart0imr; + uint8 uart0fcr; + uint8 uart0lcr; + uint8 uart0mcr; + uint8 uart0lsr; + uint8 uart0msr; + uint8 uart0scratch; + uint8 PAD[248]; /* corerev >= 1 */ + + uint8 uart1data; /* 0x400 */ + uint8 uart1imr; + uint8 uart1fcr; + uint8 uart1lcr; + uint8 uart1mcr; + uint8 uart1lsr; + uint8 uart1msr; + uint8 uart1scratch; +} chipcregs_t; + +#endif /* _LANGUAGE_ASSEMBLY */ + +#define CC_CHIPID 0 +#define CC_CAPABILITIES 4 +#define CC_JTAGCMD 0x30 +#define CC_JTAGIR 0x34 +#define CC_JTAGDR 0x38 +#define CC_JTAGCTRL 0x3c +#define CC_CLKDIV 0xa4 + +/* chipid */ +#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ +#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ +#define CID_REV_SHIFT 16 /* Chip Revision shift */ +#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ +#define CID_PKG_SHIFT 20 /* Package Option shift */ +#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ +#define CID_CC_SHIFT 24 + +/* capabilities */ +#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ +#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ +#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ +#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ +#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ +#define CAP_EXTBUS 0x00000040 /* External bus present */ +#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ +#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ +#define CAP_PWR_CTL 0x00040000 /* Power control */ +#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ +#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ +#define CAP_ROM 0x00800000 /* Internal boot rom active */ + +/* PLL type */ +#define PLL_NONE 0x00000000 +#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ +#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ +#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ +#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ + +/* corecontrol */ +#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ +#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ + +/* jtagcmd */ +#define JCMD_START 0x80000000 +#define JCMD_BUSY 0x80000000 +#define JCMD_PAUSE 0x40000000 +#define JCMD0_ACC_MASK 0x0000f000 +#define JCMD0_ACC_IRDR 0x00000000 +#define JCMD0_ACC_DR 0x00001000 +#define JCMD0_ACC_IR 0x00002000 +#define JCMD0_ACC_RESET 0x00003000 +#define JCMD0_ACC_IRPDR 0x00004000 +#define JCMD0_ACC_PDR 0x00005000 +#define JCMD0_IRW_MASK 0x00000f00 +#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ +#define JCMD_ACC_IRDR 0x00000000 +#define JCMD_ACC_DR 0x00010000 +#define JCMD_ACC_IR 0x00020000 +#define JCMD_ACC_RESET 0x00030000 +#define JCMD_ACC_IRPDR 0x00040000 +#define JCMD_ACC_PDR 0x00050000 +#define JCMD_IRW_MASK 0x00001f00 +#define JCMD_IRW_SHIFT 8 +#define JCMD_DRW_MASK 0x0000003f + +/* jtagctrl */ +#define JCTRL_FORCE_CLK 4 /* Force clock */ +#define JCTRL_EXT_EN 2 /* Enable external targets */ +#define JCTRL_EN 1 /* Enable Jtag master */ + +/* Fields in clkdiv */ +#define CLKD_SFLASH 0x0f000000 +#define CLKD_SFLASH_SHIFT 24 +#define CLKD_OTP 0x000f0000 +#define CLKD_OTP_SHIFT 16 +#define CLKD_JTAG 0x00000f00 +#define CLKD_JTAG_SHIFT 8 +#define CLKD_UART 0x000000ff + +/* intstatus/intmask */ +#define CI_GPIO 0x00000001 /* gpio intr */ +#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define CI_WDREST 0x80000000 /* watchdog reset occurred */ + +/* slow_clk_ctl */ +#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ +#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ +#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ +#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ +#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define SCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */ +#define SCC_CD_SHF 16 /* CLockDivider shift */ + +/* sys_clk_ctl */ +#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ +#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ +#define SYCC_FP 0x00000004 /* ForcePLLOn */ +#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define SYCC_HR 0x00000010 /* Force HT */ +#define SYCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */ +#define SYCC_CD_SHF 16 /* CLockDivider shift */ + +/* clockcontrol_n */ +#define CN_N1_MASK 0x3f /* n1 control */ +#define CN_N2_MASK 0x3f00 /* n2 control */ +#define CN_N2_SHIFT 8 + +/* clockcontrol_sb/pci/uart */ +#define CC_M1_MASK 0x3f /* m1 control */ +#define CC_M2_MASK 0x3f00 /* m2 control */ +#define CC_M2_SHIFT 8 +#define CC_M3_MASK 0x3f0000 /* m3 control */ +#define CC_M3_SHIFT 16 +#define CC_MC_MASK 0x1f000000 /* mux control */ +#define CC_MC_SHIFT 24 + +/* N3M Clock control values for 125Mhz */ +#define CC_125_N 0x0802 /* Default values for bcm4310 */ +#define CC_125_M 0x04020009 +#define CC_125_M25 0x11090009 +#define CC_125_M33 0x11090005 + +/* N3M Clock control magic field values */ +#define CC_F6_2 0x02 /* A factor of 2 in */ +#define CC_F6_3 0x03 /* 6-bit fields like */ +#define CC_F6_4 0x05 /* N1, M1 or M3 */ +#define CC_F6_5 0x09 +#define CC_F6_6 0x11 +#define CC_F6_7 0x21 + +#define CC_F5_BIAS 5 /* 5-bit fields get this added */ + +#define CC_MC_BYPASS 0x08 +#define CC_MC_M1 0x04 +#define CC_MC_M1M2 0x02 +#define CC_MC_M1M2M3 0x01 +#define CC_MC_M1M3 0x11 + +/* Type 2 Clock control magic field values */ +#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ +#define CC_T2M2_BIAS 3 /* m2 bias */ + +#define CC_T2MC_M1BYP 1 +#define CC_T2MC_M2BYP 2 +#define CC_T2MC_M3BYP 4 + +/* Common clock base */ +#define CC_CLOCK_BASE 24000000 /* Half the clock freq */ + + +/* Flash types in the chipcommon capabilities register */ +#define FLASH_NONE 0x000 /* No flash */ +#define SFLASH_ST 0x100 /* ST serial flash */ +#define SFLASH_AT 0x200 /* Atmel serial flash */ +#define PFLASH 0x700 /* Parallel flash */ + +/* Prefered flash window in chipcommon */ +#define CC_FLASH_BASE 0xbc000000 /* Chips with chipcommon cores */ +#define CC_FLASH_MAX 0x02000000 /* Maximum flash size with chipc */ + + +/* Bits in the config registers */ +#define CC_CFG_EN 0x0001 /* Enable */ +#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ +#define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */ +#define CC_CFG_EM_SYNC 0x0004 /* Synchronous */ +#define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */ +#define CC_CFG_EM_IDE 0x000a /* IDE */ +#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ +#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ +#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ + +/* Start/busy bit in flashcontrol */ +#define SFLASH_START 0x80000000 +#define SFLASH_BUSY SFLASH_START + +/* flashcontrol opcodes for ST flashes */ +#define SFLASH_ST_WREN 0x0006 /* Write Enable */ +#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ +#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ +#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ +#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ +#define SFLASH_ST_PP 0x0302 /* Page Program */ +#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ +#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ +#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ +#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ + +/* Status register bits for ST flashes */ +#define SFLASH_ST_WIP 0x01 /* Write In Progress */ +#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ +#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ +#define SFLASH_ST_BP_SHIFT 2 +#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ + +/* flashcontrol opcodes for Atmel flashes */ +#define SFLASH_AT_READ 0x07e8 +#define SFLASH_AT_PAGE_READ 0x07d2 +#define SFLASH_AT_BUF1_READ +#define SFLASH_AT_BUF2_READ +#define SFLASH_AT_STATUS 0x01d7 +#define SFLASH_AT_BUF1_WRITE 0x0384 +#define SFLASH_AT_BUF2_WRITE 0x0387 +#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 +#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 +#define SFLASH_AT_BUF1_PROGRAM 0x0288 +#define SFLASH_AT_BUF2_PROGRAM 0x0289 +#define SFLASH_AT_PAGE_ERASE 0x0281 +#define SFLASH_AT_BLOCK_ERASE 0x0250 +#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 +#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 +#define SFLASH_AT_BUF1_LOAD 0x0253 +#define SFLASH_AT_BUF2_LOAD 0x0255 +#define SFLASH_AT_BUF1_COMPARE 0x0260 +#define SFLASH_AT_BUF2_COMPARE 0x0261 +#define SFLASH_AT_BUF1_REPROGRAM 0x0258 +#define SFLASH_AT_BUF2_REPROGRAM 0x0259 + +/* Status register bits for Atmel flashes */ +#define SFLASH_AT_READY 0x80 +#define SFLASH_AT_MISMATCH 0x40 +#define SFLASH_AT_ID_MASK 0x38 +#define SFLASH_AT_ID_SHIFT 3 + +#endif /* _SBCHIPC_H */ diff --git a/package/linux/kernel-source/include/sbconfig.h b/package/linux/kernel-source/include/sbconfig.h new file mode 100644 index 0000000000..b5122d5ea4 --- /dev/null +++ b/package/linux/kernel-source/include/sbconfig.h @@ -0,0 +1,292 @@ +/* + * Broadcom SiliconBackplane hardware register definitions. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _SBCONFIG_H +#define _SBCONFIG_H + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif + +/* + * SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ +#define SB_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ +#define SB_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ +#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ +#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ +#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ +#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ +#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ +#define SB_EUART (SB_EXTIF_BASE + 0x00800000) +#define SB_LED (SB_EXTIF_BASE + 0x00900000) + +/* enumeration space related defs */ +#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ +#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) +#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ +#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ + +/* mips address */ +#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + +/* + * Sonics Configuration Space Registers. + */ +#define SBIPSFLAG 0x08 +#define SBTPSFLAG 0x18 +#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ +#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ +#define SBADMATCH3 0x60 +#define SBADMATCH2 0x68 +#define SBADMATCH1 0x70 +#define SBIMSTATE 0x90 +#define SBINTVEC 0x94 +#define SBTMSTATELOW 0x98 +#define SBTMSTATEHIGH 0x9c +#define SBBWA0 0xa0 +#define SBIMCONFIGLOW 0xa8 +#define SBIMCONFIGHIGH 0xac +#define SBADMATCH0 0xb0 +#define SBTMCONFIGLOW 0xb8 +#define SBTMCONFIGHIGH 0xbc +#define SBBCONFIG 0xc0 +#define SBBSTATE 0xc8 +#define SBACTCNFG 0xd8 +#define SBFLAGST 0xe8 +#define SBIDLOW 0xf8 +#define SBIDHIGH 0xfc + +#ifndef _LANGUAGE_ASSEMBLY + +typedef volatile struct _sbconfig { + uint32 PAD[2]; + uint32 sbipsflag; /* initiator port ocp slave flag */ + uint32 PAD[3]; + uint32 sbtpsflag; /* target port ocp slave flag */ + uint32 PAD[11]; + uint32 sbtmerrloga; /* (sonics >= 2.3) */ + uint32 PAD; + uint32 sbtmerrlog; /* (sonics >= 2.3) */ + uint32 PAD[3]; + uint32 sbadmatch3; /* address match3 */ + uint32 PAD; + uint32 sbadmatch2; /* address match2 */ + uint32 PAD; + uint32 sbadmatch1; /* address match1 */ + uint32 PAD[7]; + uint32 sbimstate; /* initiator agent state */ + uint32 sbintvec; /* interrupt mask */ + uint32 sbtmstatelow; /* target state */ + uint32 sbtmstatehigh; /* target state */ + uint32 sbbwa0; /* bandwidth allocation table0 */ + uint32 PAD; + uint32 sbimconfiglow; /* initiator configuration */ + uint32 sbimconfighigh; /* initiator configuration */ + uint32 sbadmatch0; /* address match0 */ + uint32 PAD; + uint32 sbtmconfiglow; /* target configuration */ + uint32 sbtmconfighigh; /* target configuration */ + uint32 sbbconfig; /* broadcast configuration */ + uint32 PAD; + uint32 sbbstate; /* broadcast state */ + uint32 PAD[3]; + uint32 sbactcnfg; /* activate configuration */ + uint32 PAD[3]; + uint32 sbflagst; /* current sbflags */ + uint32 PAD[3]; + uint32 sbidlow; /* identification */ + uint32 sbidhigh; /* identification */ +} sbconfig_t; + +#endif /* _LANGUAGE_ASSEMBLY */ + +/* sbipsflag */ +#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ +#define SBIPS_INT1_SHIFT 0 +#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ +#define SBIPS_INT2_SHIFT 8 +#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ +#define SBIPS_INT3_SHIFT 16 +#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ +#define SBIPS_INT4_SHIFT 24 + +/* sbtpsflag */ +#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ +#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ + +/* sbtmerrlog */ +#define SBTMEL_CM 0x00000007 /* command */ +#define SBTMEL_CI 0x0000ff00 /* connection id */ +#define SBTMEL_EC 0x0f000000 /* error code */ +#define SBTMEL_ME 0x80000000 /* multiple error */ + +/* sbimstate */ +#define SBIM_PC 0xf /* pipecount */ +#define SBIM_AP_MASK 0x30 /* arbitration policy */ +#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ +#define SBIM_AP_TS 0x10 /* use timesliaces only */ +#define SBIM_AP_TK 0x20 /* use token only */ +#define SBIM_AP_RSV 0x30 /* reserved */ +#define SBIM_IBE 0x20000 /* inbanderror */ +#define SBIM_TO 0x40000 /* timeout */ +#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ +#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ + +/* sbtmstatelow */ +#define SBTML_RESET 0x1 /* reset */ +#define SBTML_REJ 0x2 /* reject */ +#define SBTML_CLK 0x10000 /* clock enable */ +#define SBTML_FGC 0x20000 /* force gated clocks on */ +#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ +#define SBTML_PE 0x40000000 /* pme enable */ +#define SBTML_BE 0x80000000 /* bist enable */ + +/* sbtmstatehigh */ +#define SBTMH_SERR 0x1 /* serror */ +#define SBTMH_INT 0x2 /* interrupt */ +#define SBTMH_BUSY 0x4 /* busy */ +#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ +#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ +#define SBTMH_GCR 0x20000000 /* gated clock request */ +#define SBTMH_BISTF 0x40000000 /* bist failed */ +#define SBTMH_BISTD 0x80000000 /* bist done */ + +/* sbbwa0 */ +#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ +#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ +#define SBBWA_TAB1_SHIFT 16 + +/* sbimconfiglow */ +#define SBIMCL_STO_MASK 0x7 /* service timeout */ +#define SBIMCL_RTO_MASK 0x70 /* request timeout */ +#define SBIMCL_RTO_SHIFT 4 +#define SBIMCL_CID_MASK 0xff0000 /* connection id */ +#define SBIMCL_CID_SHIFT 16 + +/* sbimconfighigh */ +#define SBIMCH_IEM_MASK 0xc /* inband error mode */ +#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ +#define SBIMCH_TEM_SHIFT 4 +#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ +#define SBIMCH_BEM_SHIFT 6 + +/* sbadmatch0 */ +#define SBAM_TYPE_MASK 0x3 /* address type */ +#define SBAM_AD64 0x4 /* reserved */ +#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ +#define SBAM_ADINT0_SHIFT 3 +#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ +#define SBAM_ADINT1_SHIFT 3 +#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ +#define SBAM_ADINT2_SHIFT 3 +#define SBAM_ADEN 0x400 /* enable */ +#define SBAM_ADNEG 0x800 /* negative decode */ +#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ +#define SBAM_BASE0_SHIFT 8 +#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ +#define SBAM_BASE1_SHIFT 12 +#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ +#define SBAM_BASE2_SHIFT 16 + +/* sbtmconfiglow */ +#define SBTMCL_CD_MASK 0xff /* clock divide */ +#define SBTMCL_CO_MASK 0xf800 /* clock offset */ +#define SBTMCL_CO_SHIFT 11 +#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ +#define SBTMCL_IF_SHIFT 18 +#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ +#define SBTMCL_IM_SHIFT 24 + +/* sbtmconfighigh */ +#define SBTMCH_BM_MASK 0x3 /* busy mode */ +#define SBTMCH_RM_MASK 0x3 /* retry mode */ +#define SBTMCH_RM_SHIFT 2 +#define SBTMCH_SM_MASK 0x30 /* stop mode */ +#define SBTMCH_SM_SHIFT 4 +#define SBTMCH_EM_MASK 0x300 /* sb error mode */ +#define SBTMCH_EM_SHIFT 8 +#define SBTMCH_IM_MASK 0xc00 /* int mode */ +#define SBTMCH_IM_SHIFT 10 + +/* sbbconfig */ +#define SBBC_LAT_MASK 0x3 /* sb latency */ +#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ +#define SBBC_MAX0_SHIFT 16 +#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ +#define SBBC_MAX1_SHIFT 20 + +/* sbbstate */ +#define SBBS_SRD 0x1 /* st reg disable */ +#define SBBS_HRD 0x2 /* hold reg disable */ + +/* sbidlow */ +#define SBIDL_CS_MASK 0x3 /* config space */ +#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ +#define SBIDL_AR_SHIFT 3 +#define SBIDL_SYNCH 0x40 /* sync */ +#define SBIDL_INIT 0x80 /* initiator */ +#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ +#define SBIDL_MINLAT_SHIFT 8 +#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ +#define SBIDL_MAXLAT_SHIFT 12 +#define SBIDL_FIRST 0x10000 /* this initiator is first */ +#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ +#define SBIDL_CW_SHIFT 18 +#define SBIDL_TP_MASK 0xf00000 /* target ports */ +#define SBIDL_TP_SHIFT 20 +#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ +#define SBIDL_IP_SHIFT 24 +#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ +#define SBIDL_RV_SHIFT 28 + +/* sbidhigh */ +#define SBIDH_RC_MASK 0xf /* revision code*/ +#define SBIDH_CC_MASK 0xfff0 /* core code */ +#define SBIDH_CC_SHIFT 4 +#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ +#define SBIDH_VC_SHIFT 16 + +#define SB_COMMIT 0xfd8 /* update buffered registers value */ + +/* vendor codes */ +#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ + +/* core codes */ +#define SB_CC 0x800 /* chipcommon core */ +#define SB_ILINE20 0x801 /* iline20 core */ +#define SB_SDRAM 0x803 /* sdram core */ +#define SB_PCI 0x804 /* pci core */ +#define SB_MIPS 0x805 /* mips core */ +#define SB_ENET 0x806 /* enet mac core */ +#define SB_CODEC 0x807 /* v90 codec core */ +#define SB_USB 0x808 /* usb 1.1 host/device core */ +#define SB_ILINE100 0x80a /* iline100 core */ +#define SB_IPSEC 0x80b /* ipsec core */ +#define SB_PCMCIA 0x80d /* pcmcia core */ +#define SB_MEMC 0x80f /* memc sdram core */ +#define SB_EXTIF 0x811 /* external interface core */ +#define SB_D11 0x812 /* 802.11 MAC core */ +#define SB_MIPS33 0x816 /* mips3302 core */ +#define SB_USB11H 0x817 /* usb 1.1 host core */ +#define SB_USB11D 0x818 /* usb 1.1 device core */ +#define SB_USB20H 0x819 /* usb 2.0 host core */ +#define SB_USB20D 0x81A /* usb 2.0 device core */ +#define SB_SDIOH 0x81B /* sdio host core */ + +#endif /* _SBCONFIG_H */ diff --git a/package/linux/kernel-source/include/sbextif.h b/package/linux/kernel-source/include/sbextif.h new file mode 100644 index 0000000000..32274b8165 --- /dev/null +++ b/package/linux/kernel-source/include/sbextif.h @@ -0,0 +1,242 @@ +/* + * Hardware-specific External Interface I/O core definitions + * for the BCM47xx family of SiliconBackplane-based chips. + * + * The External Interface core supports a total of three external chip selects + * supporting external interfaces. One of the external chip selects is + * used for Flash, one is used for PCMCIA, and the other may be + * programmed to support either a synchronous interface or an + * asynchronous interface. The asynchronous interface can be used to + * support external devices such as UARTs and the BCM2019 Bluetooth + * baseband processor. + * The external interface core also contains 2 on-chip 16550 UARTs, clock + * frequency control, a watchdog interrupt timer, and a GPIO interface. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _SBEXTIF_H +#define _SBEXTIF_H + +/* external interface address space */ +#define EXTIF_PCMCIA_MEMBASE(x) (x) +#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) +#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) +#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) +#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif /* PAD */ + +/* + * The multiple instances of output and output enable registers + * are present to allow driver software for multiple cores to control + * gpio outputs without needing to share a single register pair. + */ +struct gpiouser { + uint32 out; + uint32 outen; +}; +#define NGPIOUSER 5 + +typedef volatile struct { + uint32 corecontrol; + uint32 extstatus; + uint32 PAD[2]; + + /* pcmcia control registers */ + uint32 pcmcia_config; + uint32 pcmcia_memwait; + uint32 pcmcia_attrwait; + uint32 pcmcia_iowait; + + /* programmable interface control registers */ + uint32 prog_config; + uint32 prog_waitcount; + + /* flash control registers */ + uint32 flash_config; + uint32 flash_waitcount; + uint32 PAD[4]; + + uint32 watchdog; + + /* clock control */ + uint32 clockcontrol_n; + uint32 clockcontrol_sb; + uint32 clockcontrol_pci; + uint32 clockcontrol_mii; + uint32 PAD[3]; + + /* gpio */ + uint32 gpioin; + struct gpiouser gpio[NGPIOUSER]; + uint32 PAD; + uint32 ejtagouten; + uint32 gpiointpolarity; + uint32 gpiointmask; + uint32 PAD[153]; + + uint8 uartdata; + uint8 PAD[3]; + uint8 uartimer; + uint8 PAD[3]; + uint8 uartfcr; + uint8 PAD[3]; + uint8 uartlcr; + uint8 PAD[3]; + uint8 uartmcr; + uint8 PAD[3]; + uint8 uartlsr; + uint8 PAD[3]; + uint8 uartmsr; + uint8 PAD[3]; + uint8 uartscratch; + uint8 PAD[3]; +} extifregs_t; + +/* corecontrol */ +#define CC_UE (1 << 0) /* uart enable */ + +/* extstatus */ +#define ES_EM (1 << 0) /* endian mode (ro) */ +#define ES_EI (1 << 1) /* external interrupt pin (ro) */ +#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ + +/* gpio bit mask */ +#define GPIO_BIT0 (1 << 0) +#define GPIO_BIT1 (1 << 1) +#define GPIO_BIT2 (1 << 2) +#define GPIO_BIT3 (1 << 3) +#define GPIO_BIT4 (1 << 4) +#define GPIO_BIT5 (1 << 5) +#define GPIO_BIT6 (1 << 6) +#define GPIO_BIT7 (1 << 7) + + +/* pcmcia/prog/flash_config */ +#define CF_EN (1 << 0) /* enable */ +#define CF_EM_MASK 0xe /* mode */ +#define CF_EM_SHIFT 1 +#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ +#define CF_EM_SYNC 0x2 /* synchronous mode */ +#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ +#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ +#define CF_BS (1 << 5) /* byteswap */ +#define CF_CD_MASK 0xc0 /* clock divider */ +#define CF_CD_SHIFT 6 +#define CF_CD_DIV2 0x0 /* backplane/2 */ +#define CF_CD_DIV3 0x40 /* backplane/3 */ +#define CF_CD_DIV4 0x80 /* backplane/4 */ +#define CF_CE (1 << 8) /* clock enable */ +#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ + +/* pcmcia_memwait */ +#define PM_W0_MASK 0x3f /* waitcount0 */ +#define PM_W1_MASK 0x1f00 /* waitcount1 */ +#define PM_W1_SHIFT 8 +#define PM_W2_MASK 0x1f0000 /* waitcount2 */ +#define PM_W2_SHIFT 16 +#define PM_W3_MASK 0x1f000000 /* waitcount3 */ +#define PM_W3_SHIFT 24 + +/* pcmcia_attrwait */ +#define PA_W0_MASK 0x3f /* waitcount0 */ +#define PA_W1_MASK 0x1f00 /* waitcount1 */ +#define PA_W1_SHIFT 8 +#define PA_W2_MASK 0x1f0000 /* waitcount2 */ +#define PA_W2_SHIFT 16 +#define PA_W3_MASK 0x1f000000 /* waitcount3 */ +#define PA_W3_SHIFT 24 + +/* pcmcia_iowait */ +#define PI_W0_MASK 0x3f /* waitcount0 */ +#define PI_W1_MASK 0x1f00 /* waitcount1 */ +#define PI_W1_SHIFT 8 +#define PI_W2_MASK 0x1f0000 /* waitcount2 */ +#define PI_W2_SHIFT 16 +#define PI_W3_MASK 0x1f000000 /* waitcount3 */ +#define PI_W3_SHIFT 24 + +/* prog_waitcount */ +#define PW_W0_MASK 0x0000001f /* waitcount0 */ +#define PW_W1_MASK 0x00001f00 /* waitcount1 */ +#define PW_W1_SHIFT 8 +#define PW_W2_MASK 0x001f0000 /* waitcount2 */ +#define PW_W2_SHIFT 16 +#define PW_W3_MASK 0x1f000000 /* waitcount3 */ +#define PW_W3_SHIFT 24 + +#define PW_W0 0x0000000c +#define PW_W1 0x00000a00 +#define PW_W2 0x00020000 +#define PW_W3 0x01000000 + +/* flash_waitcount */ +#define FW_W0_MASK 0x1f /* waitcount0 */ +#define FW_W1_MASK 0x1f00 /* waitcount1 */ +#define FW_W1_SHIFT 8 +#define FW_W2_MASK 0x1f0000 /* waitcount2 */ +#define FW_W2_SHIFT 16 +#define FW_W3_MASK 0x1f000000 /* waitcount3 */ +#define FW_W3_SHIFT 24 + +/* watchdog */ +#define WATCHDOG_CLOCK 48000000 /* Hz */ + +/* clockcontrol_n */ +#define CN_N1_MASK 0x3f /* n1 control */ +#define CN_N2_MASK 0x3f00 /* n2 control */ +#define CN_N2_SHIFT 8 + +/* clockcontrol_sb/pci/mii */ +#define CC_M1_MASK 0x3f /* m1 control */ +#define CC_M2_MASK 0x3f00 /* m2 control */ +#define CC_M2_SHIFT 8 +#define CC_M3_MASK 0x3f0000 /* m3 control */ +#define CC_M3_SHIFT 16 +#define CC_MC_MASK 0x1f000000 /* mux control */ +#define CC_MC_SHIFT 24 + +/* Clock control default values */ +#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ +#define CC_DEF_100 0x04020011 +#define CC_DEF_33 0x11030011 +#define CC_DEF_25 0x11050011 + +/* Clock control values for 125Mhz */ +#define CC_125_N 0x0802 +#define CC_125_M 0x04020009 +#define CC_125_M25 0x11090009 +#define CC_125_M33 0x11090005 + +/* Clock control magic field values */ +#define CC_F6_2 0x02 /* A factor of 2 in */ +#define CC_F6_3 0x03 /* 6-bit fields like */ +#define CC_F6_4 0x05 /* N1, M1 or M3 */ +#define CC_F6_5 0x09 +#define CC_F6_6 0x11 +#define CC_F6_7 0x21 + +#define CC_F5_BIAS 5 /* 5-bit fields get this added */ + +#define CC_MC_BYPASS 0x08 +#define CC_MC_M1 0x04 +#define CC_MC_M1M2 0x02 +#define CC_MC_M1M2M3 0x01 +#define CC_MC_M1M3 0x11 + +#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ + +#endif /* _SBEXTIF_H */ diff --git a/package/linux/kernel-source/include/sbmemc.h b/package/linux/kernel-source/include/sbmemc.h new file mode 100644 index 0000000000..d0002ac345 --- /dev/null +++ b/package/linux/kernel-source/include/sbmemc.h @@ -0,0 +1,147 @@ +/* + * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _SBMEMC_H +#define _SBMEMC_H + +#ifdef _LANGUAGE_ASSEMBLY + +#define MEMC_CONTROL 0x00 +#define MEMC_CONFIG 0x04 +#define MEMC_REFRESH 0x08 +#define MEMC_BISTSTAT 0x0c +#define MEMC_MODEBUF 0x10 +#define MEMC_BKCLS 0x14 +#define MEMC_PRIORINV 0x18 +#define MEMC_DRAMTIM 0x1c +#define MEMC_INTSTAT 0x20 +#define MEMC_INTMASK 0x24 +#define MEMC_INTINFO 0x28 +#define MEMC_NCDLCTL 0x30 +#define MEMC_RDNCDLCOR 0x34 +#define MEMC_WRNCDLCOR 0x38 +#define MEMC_MISCDLYCTL 0x3c +#define MEMC_DQSGATENCDL 0x40 +#define MEMC_SPARE 0x44 +#define MEMC_TPADDR 0x48 +#define MEMC_TPDATA 0x4c +#define MEMC_BARRIER 0x50 +#define MEMC_CORE 0x54 + + +#else + +/* Sonics side: MEMC core registers */ +typedef volatile struct sbmemcregs { + uint32 control; + uint32 config; + uint32 refresh; + uint32 biststat; + uint32 modebuf; + uint32 bkcls; + uint32 priorinv; + uint32 dramtim; + uint32 intstat; + uint32 intmask; + uint32 intinfo; + uint32 reserved1; + uint32 ncdlctl; + uint32 rdncdlcor; + uint32 wrncdlcor; + uint32 miscdlyctl; + uint32 dqsgatencdl; + uint32 spare; + uint32 tpaddr; + uint32 tpdata; + uint32 barrier; + uint32 core; +} sbmemcregs_t; + +#endif + +/* MEMC Core Init values (OCP ID 0x80f) */ + +/* For sdr: */ +#define MEMC_SD_CONFIG_INIT 0x00048000 +#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 +#define MEMC_SD_DRAMTIM3_INIT 0x000754da +#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 +#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 +#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ +#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b +#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ +#define MEMC_SD_CONTROL_INIT0 0x00000002 +#define MEMC_SD_CONTROL_INIT1 0x00000008 +#define MEMC_SD_CONTROL_INIT2 0x00000004 +#define MEMC_SD_CONTROL_INIT3 0x00000010 +#define MEMC_SD_CONTROL_INIT4 0x00000001 +#define MEMC_SD_MODEBUF_INIT 0x00000000 +#define MEMC_SD_REFRESH_INIT 0x0000840f + + +/* This is for SDRM8X8X4 */ +#define MEMC_SDR_INIT 0x0008 +#define MEMC_SDR_MODE 0x32 +#define MEMC_SDR_NCDL 0x00020032 +#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ + +/* For ddr: */ +#define MEMC_CONFIG_INIT 0x00048000 +#define MEMC_DRAMTIM2_INIT 0x000754d8 +#define MEMC_DRAMTIM25_INIT 0x000754d9 +#define MEMC_RDNCDLCOR_INIT 0x00000000 +#define MEMC_WRNCDLCOR_INIT 0x49351200 +#define MEMC_1_WRNCDLCOR_INIT 0x14500200 +#define MEMC_DQSGATENCDL_INIT 0x00030000 +#define MEMC_MISCDLYCTL_INIT 0x21061c1b +#define MEMC_1_MISCDLYCTL_INIT 0x21021400 +#define MEMC_NCDLCTL_INIT 0x00002001 +#define MEMC_CONTROL_INIT0 0x00000002 +#define MEMC_CONTROL_INIT1 0x00000008 +#define MEMC_MODEBUF_INIT0 0x00004000 +#define MEMC_CONTROL_INIT2 0x00000010 +#define MEMC_MODEBUF_INIT1 0x00000100 +#define MEMC_CONTROL_INIT3 0x00000010 +#define MEMC_CONTROL_INIT4 0x00000008 +#define MEMC_REFRESH_INIT 0x0000840f +#define MEMC_CONTROL_INIT5 0x00000004 +#define MEMC_MODEBUF_INIT2 0x00000000 +#define MEMC_CONTROL_INIT6 0x00000010 +#define MEMC_CONTROL_INIT7 0x00000001 + + +/* This is for DDRM16X16X2 */ +#define MEMC_DDR_INIT 0x0009 +#define MEMC_DDR_MODE 0x62 +#define MEMC_DDR_NCDL 0x0005050a +#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ + +/* mask for sdr/ddr calibration registers */ +#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff +#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff +#define MEMC_DQSGATENCDL_G_MASK 0x000000ff + +/* masks for miscdlyctl registers */ +#define MEMC_MISC_SM_MASK 0x30000000 +#define MEMC_MISC_SM_SHIFT 28 +#define MEMC_MISC_SD_MASK 0x0f000000 +#define MEMC_MISC_SD_SHIFT 24 + +/* hw threshhold for calculating wr/rd for sdr memc */ +#define MEMC_CD_THRESHOLD 128 + +/* Low bit of init register says if memc is ddr or sdr */ +#define MEMC_CONFIG_DDR 0x00000001 + +#endif /* _SBMEMC_H */ diff --git a/package/linux/kernel-source/include/sbmips.h b/package/linux/kernel-source/include/sbmips.h new file mode 100644 index 0000000000..677eaca5f2 --- /dev/null +++ b/package/linux/kernel-source/include/sbmips.h @@ -0,0 +1,56 @@ +/* + * Broadcom SiliconBackplane MIPS definitions + * + * SB MIPS cores are custom MIPS32 processors with SiliconBackplane + * OCP interfaces. The CP0 processor ID is 0x00024000, where bits + * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP + * interface. The core revision is stored in the SB ID register in SB + * configuration space. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _SBMIPS_H +#define _SBMIPS_H + +#ifndef _LANGUAGE_ASSEMBLY + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif /* PAD */ + +typedef volatile struct { + uint32 corecontrol; + uint32 PAD[2]; + uint32 biststatus; + uint32 PAD[4]; + uint32 intstatus; + uint32 intmask; + uint32 timer; +} mipsregs_t; + +extern uint32 sb_flag(void *sbh); +extern uint sb_irq(void *sbh); + +extern void sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); + +extern void sb_mips_init(void *sbh); +extern uint32 sb_mips_clock(void *sbh); +extern bool sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); + +extern uint32 sb_memc_get_ncdl(void *sbh); + +#endif /* _LANGUAGE_ASSEMBLY */ + +#endif /* _SBMIPS_H */ diff --git a/package/linux/kernel-source/include/sbpci.h b/package/linux/kernel-source/include/sbpci.h new file mode 100644 index 0000000000..d39a91b3a5 --- /dev/null +++ b/package/linux/kernel-source/include/sbpci.h @@ -0,0 +1,113 @@ +/* + * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. + * + * $Id$ + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + */ + +#ifndef _SBPCI_H +#define _SBPCI_H + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif + +/* Sonics side: PCI core and host control registers */ +typedef struct sbpciregs { + uint32 control; /* PCI control */ + uint32 PAD[3]; + uint32 arbcontrol; /* PCI arbiter control */ + uint32 PAD[3]; + uint32 intstatus; /* Interrupt status */ + uint32 intmask; /* Interrupt mask */ + uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ + uint32 PAD[9]; + uint32 bcastaddr; /* Sonics broadcast address */ + uint32 bcastdata; /* Sonics broadcast data */ + uint32 PAD[2]; + uint32 gpioin; /* ro: gpio input (>=rev2) */ + uint32 gpioout; /* rw: gpio output (>=rev2) */ + uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ + uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ + uint32 PAD[36]; + uint32 sbtopci0; /* Sonics to PCI translation 0 */ + uint32 sbtopci1; /* Sonics to PCI translation 1 */ + uint32 sbtopci2; /* Sonics to PCI translation 2 */ + uint32 PAD[445]; + uint16 sprom[36]; /* SPROM shadow Area */ + uint32 PAD[46]; +} sbpciregs_t; + +/* PCI control */ +#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ +#define PCI_RST 0x02 /* Value driven out to pin */ +#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ +#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ + +/* PCI arbiter control */ +#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ +#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ +#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */ +#define PCI_PARKID_SHIFT 1 +#define PCI_PARKID_LAST 0 /* Last requestor */ +#define PCI_PARKID_4710 1 /* 4710 */ +#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */ +#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */ + +/* Interrupt status/mask */ +#define PCI_INTA 0x01 /* PCI INTA# is asserted */ +#define PCI_INTB 0x02 /* PCI INTB# is asserted */ +#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ +#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ +#define PCI_PME 0x10 /* PCI PME# is asserted */ + +/* (General) PCI/SB mailbox interrupts, two bits per pci function */ +#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ +#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ +#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ +#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ +#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ +#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ +#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ +#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ + +/* Sonics broadcast address */ +#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ + +/* Sonics to PCI translation types */ +#define SBTOPCI0_MASK 0xfc000000 +#define SBTOPCI1_MASK 0xfc000000 +#define SBTOPCI2_MASK 0xc0000000 +#define SBTOPCI_MEM 0 +#define SBTOPCI_IO 1 +#define SBTOPCI_CFG0 2 +#define SBTOPCI_CFG1 3 +#define SBTOPCI_PREF 0x4 /* prefetch enable */ +#define SBTOPCI_BURST 0x8 /* burst enable */ + +/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ +#define cap_list rsvd_a[0] +#define bar0_window dev_dep[0x80 - 0x40] +#define bar1_window dev_dep[0x84 - 0x40] +#define sprom_control dev_dep[0x88 - 0x40] + +#ifndef _LANGUAGE_ASSEMBLY + +extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); +extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); +extern void sbpci_ban(uint16 core); +extern int sbpci_init(void *sbh); +extern void sbpci_check(void *sbh); + +#endif /* !_LANGUAGE_ASSEMBLY */ + +#endif /* _SBPCI_H */ diff --git a/package/linux/kernel-source/include/sbpcmcia.h b/package/linux/kernel-source/include/sbpcmcia.h new file mode 100644 index 0000000000..2493d8c7ad --- /dev/null +++ b/package/linux/kernel-source/include/sbpcmcia.h @@ -0,0 +1,139 @@ +/* + * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. + * + * $Id$ + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + */ + +#ifndef _SBPCMCIA_H +#define _SBPCMCIA_H + + +/* All the addresses that are offsets in attribute space are divided + * by two to account for the fact that odd bytes are invalid in + * attribute space and our read/write routines make the space appear + * as if they didn't exist. Still we want to show the original numbers + * as documented in the hnd_pcmcia core manual. + */ + +/* PCMCIA Function Configuration Registers */ +#define PCMCIA_FCR (0x700 / 2) + +#define FCR0_OFF 0 +#define FCR1_OFF (0x40 / 2) +#define FCR2_OFF (0x80 / 2) +#define FCR3_OFF (0xc0 / 2) + +#define PCMCIA_FCR0 (0x700 / 2) +#define PCMCIA_FCR1 (0x740 / 2) +#define PCMCIA_FCR2 (0x780 / 2) +#define PCMCIA_FCR3 (0x7c0 / 2) + +/* Standard PCMCIA FCR registers */ + +#define PCMCIA_COR 0 + +#define COR_RST 0x80 +#define COR_LEV 0x40 +#define COR_IRQEN 0x04 +#define COR_BLREN 0x01 +#define COR_FUNEN 0x01 + + +#define PCICIA_FCSR (2 / 2) +#define PCICIA_PRR (4 / 2) +#define PCICIA_SCR (6 / 2) +#define PCICIA_ESR (8 / 2) + + +#define PCM_MEMOFF 0x0000 +#define F0_MEMOFF 0x1000 +#define F1_MEMOFF 0x2000 +#define F2_MEMOFF 0x3000 +#define F3_MEMOFF 0x4000 + +/* Memory base in the function fcr's */ +#define MEM_ADDR0 (0x728 / 2) +#define MEM_ADDR1 (0x72a / 2) +#define MEM_ADDR2 (0x72c / 2) + +/* PCMCIA base plus Srom access in fcr0: */ +#define PCMCIA_ADDR0 (0x072e / 2) +#define PCMCIA_ADDR1 (0x0730 / 2) +#define PCMCIA_ADDR2 (0x0732 / 2) + +#define MEM_SEG (0x0734 / 2) +#define SROM_CS (0x0736 / 2) +#define SROM_DATAL (0x0738 / 2) +#define SROM_DATAH (0x073a / 2) +#define SROM_ADDRL (0x073c / 2) +#define SROM_ADDRH (0x073e / 2) + +/* Values for srom_cs: */ +#define SROM_IDLE 0 +#define SROM_WRITE 1 +#define SROM_READ 2 +#define SROM_WEN 4 +#define SROM_WDS 7 +#define SROM_DONE 8 + +/* CIS stuff */ + +/* The CIS stops where the FCRs start */ +#define CIS_SIZE PCMCIA_FCR + +/* Standard tuples we know about */ + +#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ +#define CISTPL_FUNCE 0x22 /* Function extensions */ +#define CISTPL_CFTABLE 0x1b /* Config table entry */ + +/* Function extensions for LANs */ + +#define LAN_TECH 1 /* Technology type */ +#define LAN_SPEED 2 /* Raw bit rate */ +#define LAN_MEDIA 3 /* Transmission media */ +#define LAN_NID 4 /* Node identification (aka MAC addr) */ +#define LAN_CONN 5 /* Connector standard */ + + +/* CFTable */ +#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ +#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ +#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ + +/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll + * take one for HNBU, and use "extensions" (a la FUNCE) within it. + */ + +#define CISTPL_BRCM_HNBU 0x80 + +/* Subtypes of BRCM_HNBU: */ + +#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor & + * device id and chiprev + */ +#define HNBU_BOARDREV 0x02 /* Two bytes board revision */ +#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */ +#define HNBU_OEM 0x04 /* Eight bytes OEM data */ +#define HNBU_CC 0x05 /* Default country code */ +#define HNBU_AA 0x06 /* Antennas available */ +#define HNBU_AG 0x07 /* Antenna gain */ +#define HNBU_BOARDFLAGS 0x08 /* board flags */ +#define HNBU_LED 0x09 /* LED set */ + + +/* sbtmstatelow */ +#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ +#define SBTML_INT_EN 0x20000 /* enable sb interrupt */ + +/* sbtmstatehigh */ +#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ + +#endif /* _SBPCMCIA_H */ diff --git a/package/linux/kernel-source/include/sbsdram.h b/package/linux/kernel-source/include/sbsdram.h new file mode 100644 index 0000000000..1b4c539a84 --- /dev/null +++ b/package/linux/kernel-source/include/sbsdram.h @@ -0,0 +1,75 @@ +/* + * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _SBSDRAM_H +#define _SBSDRAM_H + +#ifndef _LANGUAGE_ASSEMBLY + +/* Sonics side: SDRAM core registers */ +typedef volatile struct sbsdramregs { + uint32 initcontrol; /* Generates external SDRAM initialization sequence */ + uint32 config; /* Initializes external SDRAM mode register */ + uint32 refresh; /* Controls external SDRAM refresh rate */ + uint32 pad1; + uint32 pad2; +} sbsdramregs_t; + +#endif + +/* SDRAM initialization control (initcontrol) register bits */ +#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ +#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ +#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ +#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ +#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ +#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ +#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ +#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ +#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ +#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ +#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ +#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ +#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ + +/* SDRAM configuration (config) register bits */ +#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ +#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ +#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ +#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ +#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ +#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ + +/* SDRAM refresh control (refresh) register bits */ +#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ +#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ + +/* SDRAM Core default Init values (OCP ID 0x803) */ +#define SDRAM_INIT MEM4MX16X2 +#define SDRAM_CONFIG SDRAM_BURSTFULL +#define SDRAM_REFRESH SDRAM_REF(0x40) + +#define MEM1MX16 0x009 /* 2 MB */ +#define MEM1MX16X2 0x409 /* 4 MB */ +#define MEM2MX8X2 0x809 /* 4 MB */ +#define MEM2MX8X4 0xc09 /* 8 MB */ +#define MEM2MX32 0x439 /* 8 MB */ +#define MEM4MX16 0x019 /* 8 MB */ +#define MEM4MX16X2 0x419 /* 16 MB */ +#define MEM8MX8X2 0x819 /* 16 MB */ +#define MEM8MX16 0x829 /* 16 MB */ +#define MEM4MX32 0x429 /* 16 MB */ +#define MEM8MX8X4 0xc19 /* 32 MB */ +#define MEM8MX16X2 0xc29 /* 32 MB */ + +#endif /* _SBSDRAM_H */ diff --git a/package/linux/kernel-source/include/sbutils.h b/package/linux/kernel-source/include/sbutils.h new file mode 100644 index 0000000000..1ab09f19d4 --- /dev/null +++ b/package/linux/kernel-source/include/sbutils.h @@ -0,0 +1,94 @@ +/* + * Misc utility routines for accessing chip-specific features + * of Broadcom HNBU SiliconBackplane-based chips. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _sbutils_h_ +#define _sbutils_h_ + +/* Board styles (bustype) */ +#define BOARDSTYLE_SOC 0 /* Silicon Backplane */ +#define BOARDSTYLE_PCI 1 /* PCI/MiniPCI board */ +#define BOARDSTYLE_PCMCIA 2 /* PCMCIA board */ +#define BOARDSTYLE_CARDBUS 3 /* Cardbus board */ + +/* + * Many of the routines below take an 'sbh' handle as their first arg. + * Allocate this by calling sb_attach(). Free it by calling sb_detach(). + * At any one time, the sbh is logically focused on one particular sb core + * (the "current core"). + * Use sb_setcore() or sb_setcoreidx() to change the association to another core. + */ + +/* exported externs */ +extern void *sb_attach(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); +extern void *sb_kattach(void); +extern void sb_detach(void *sbh); +extern uint sb_chip(void *sbh); +extern uint sb_chiprev(void *sbh); +extern uint sb_chipcrev(void *sbh); +extern uint sb_chippkg(void *sbh); +extern uint sb_pcirev(void *sbh); +extern uint sb_pcmciarev(void *sbh); +extern uint sb_boardvendor(void *sbh); +extern uint sb_boardtype(void *sbh); +extern uint sb_boardstyle(void *sbh); +extern uint sb_bus(void *sbh); +extern uint sb_corelist(void *sbh, uint coreid[]); +extern uint sb_coreid(void *sbh); +extern uint sb_coreidx(void *sbh); +extern uint sb_coreunit(void *sbh); +extern uint sb_corevendor(void *sbh); +extern uint sb_corerev(void *sbh); +extern void *sb_coreregs(void *sbh); +extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val); +extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val); +extern bool sb_iscoreup(void *sbh); +extern void *sb_setcoreidx(void *sbh, uint coreidx); +extern void *sb_setcore(void *sbh, uint coreid, uint coreunit); +extern void sb_commit(void *sbh); +extern uint32 sb_base(uint32 admatch); +extern uint32 sb_size(uint32 admatch); +extern void sb_core_reset(void *sbh, uint32 bits); +extern void sb_core_tofixup(void *sbh); +extern void sb_core_disable(void *sbh, uint32 bits); +extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); +extern uint32 sb_clock(void *sbh); +extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask); +extern void sb_pcmcia_init(void *sbh); +extern void sb_watchdog(void *sbh, uint ticks); +extern void *sb_gpiosetcore(void *sbh); +extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val); +extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val); +extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val); +extern uint32 sb_gpioin(void *sbh); +extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val); +extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val); +extern bool sb_taclear(void *sbh); +extern void sb_pwrctl_init(void *sbh); +extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh); +extern bool sb_pwrctl_clk(void *sbh, uint mode); +extern int sb_pwrctl_xtal(void *sbh, uint what, bool on); +extern int sb_pwrctl_slowclk(void *sbh, bool set, uint *div); +extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg); + +/* pwrctl xtal what flags */ +#define XTAL 0x1 /* primary crystal oscillator (2050) */ +#define PLL 0x2 /* main chip pll */ + +/* pwrctl clk mode */ +#define CLK_FAST 0 /* force fast (pll) clock */ +#define CLK_SLOW 1 /* force slow clock */ +#define CLK_DYNAMIC 2 /* enable dynamic power control */ + +#endif /* _sbutils_h_ */ diff --git a/package/linux/kernel-source/include/sflash.h b/package/linux/kernel-source/include/sflash.h new file mode 100644 index 0000000000..4691b5c344 --- /dev/null +++ b/package/linux/kernel-source/include/sflash.h @@ -0,0 +1,36 @@ +/* + * Broadcom SiliconBackplane chipcommon serial flash interface + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _sflash_h_ +#define _sflash_h_ + +#include +#include + +struct sflash { + uint blocksize; /* Block size */ + uint numblocks; /* Number of blocks */ + uint32 type; /* Type */ + uint size; /* Total size in bytes */ +}; + +/* Utility functions */ +extern int sflash_poll(chipcregs_t *cc, uint offset); +extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); +extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); +extern int sflash_erase(chipcregs_t *cc, uint offset); +extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); +extern struct sflash * sflash_init(chipcregs_t *cc); + +#endif /* _sflash_h_ */ diff --git a/package/linux/kernel-source/include/trxhdr.h b/package/linux/kernel-source/include/trxhdr.h new file mode 100644 index 0000000000..93b100fee0 --- /dev/null +++ b/package/linux/kernel-source/include/trxhdr.h @@ -0,0 +1,31 @@ +/* + * TRX image file header format. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 1 /* Do not write TRX header */ + +struct trx_header { + uint32 magic; /* "HDR0" */ + uint32 len; /* Length of file including header */ + uint32 crc32; /* 32-bit CRC from flag_version to end of file */ + uint32 flag_version; /* 0:15 flags, 16:31 version */ + uint32 offsets[3]; /* Offsets of partitions from start of header */ +}; + +/* Compatibility */ +typedef struct trx_header TRXHDR, *PTRXHDR; diff --git a/package/linux/kernel-source/include/typedefs.h b/package/linux/kernel-source/include/typedefs.h new file mode 100644 index 0000000000..6b0c25e042 --- /dev/null +++ b/package/linux/kernel-source/include/typedefs.h @@ -0,0 +1,293 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _TYPEDEFS_H_ +#define _TYPEDEFS_H_ + + +/* Define 'SITE_TYPEDEFS' in the compile to include a site specific + * typedef file "site_typedefs.h". + * + * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" + * section of this file makes inferences about the compile environment + * based on defined symbols and possibly compiler pragmas. + * + * Following these two sections is the "Default Typedefs" + * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is + * defined. This section has a default set of typedefs and a few + * proprocessor symbols (TRUE, FALSE, NULL, ...). + */ + +#ifdef SITE_TYPEDEFS + +/******************************************************************************* + * Site Specific Typedefs + *******************************************************************************/ + +#include "site_typedefs.h" + +#else + +/******************************************************************************* + * Inferred Typedefs + *******************************************************************************/ + +/* Infer the compile environment based on preprocessor symbols and pramas. + * Override type definitions as needed, and include configuration dependent + * header files to define types. + */ + +#ifdef __cplusplus + +#define TYPEDEF_BOOL +#ifndef FALSE +#define FALSE false +#endif +#ifndef TRUE +#define TRUE true +#endif + +#else /* ! __cplusplus */ + +/* for Windows build, define bool as a uchar instead of the default int */ +#if defined(_WIN32) + +#define TYPEDEF_BOOL +typedef unsigned char bool; + +#endif /* _WIN32 */ + +#endif /* ! __cplusplus */ + +#ifdef _MSC_VER /* Microsoft C */ +#define TYPEDEF_INT64 +#define TYPEDEF_UINT64 +typedef signed __int64 int64; +typedef unsigned __int64 uint64; +#endif + +#if defined(MACOSX) && defined(KERNEL) +#define TYPEDEF_BOOL +#endif + + +#if defined(linux) +#define TYPEDEF_UINT +#define TYPEDEF_USHORT +#define TYPEDEF_ULONG +#endif + +#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) +#define TYPEDEF_UINT +#define TYPEDEF_USHORT +#endif + + +/* Do not support the (u)int64 types with strict ansi for GNU C */ +#if defined(__GNUC__) && defined(__STRICT_ANSI__) +#define TYPEDEF_INT64 +#define TYPEDEF_UINT64 +#endif + +/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode + * for singned or unsigned */ +#if defined(__ICL) + +#define TYPEDEF_INT64 + +#if defined(__STDC__) +#define TYPEDEF_UINT64 +#endif + +#endif /* __ICL */ + + +#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) + +/* pick up ushort & uint from standard types.h */ +#if defined(linux) && defined(__KERNEL__) + +#include /* sys/types.h and linux/types.h are oil and water */ + +#else + +#include + +#endif + +#endif /* !_WIN32 && !PMON && !_CFE_ */ + +#if defined(MACOSX) && defined(KERNEL) +#include +#endif + + +/* use the default typedefs in the next section of this file */ +#define USE_TYPEDEF_DEFAULTS + +#endif /* SITE_TYPEDEFS */ + + +/******************************************************************************* + * Default Typedefs + *******************************************************************************/ + +#ifdef USE_TYPEDEF_DEFAULTS +#undef USE_TYPEDEF_DEFAULTS + +#ifndef TYPEDEF_BOOL +typedef int bool; +#endif + +/*----------------------- define uchar, ushort, uint, ulong ----------------*/ + +#ifndef TYPEDEF_UCHAR +typedef unsigned char uchar; +#endif + +#ifndef TYPEDEF_USHORT +typedef unsigned short ushort; +#endif + +#ifndef TYPEDEF_UINT +typedef unsigned int uint; +#endif + +#ifndef TYPEDEF_ULONG +typedef unsigned long ulong; +#endif + +/*----------------------- define [u]int8/16/32/64 --------------------------*/ + +#ifndef TYPEDEF_UINT8 +typedef unsigned char uint8; +#endif + +#ifndef TYPEDEF_UINT16 +typedef unsigned short uint16; +#endif + +#ifndef TYPEDEF_UINT32 +typedef unsigned int uint32; +#endif + +#ifndef TYPEDEF_UINT64 +typedef unsigned long long uint64; +#endif + +#ifndef TYPEDEF_INT8 +typedef signed char int8; +#endif + +#ifndef TYPEDEF_INT16 +typedef signed short int16; +#endif + +#ifndef TYPEDEF_INT32 +typedef signed int int32; +#endif + +#ifndef TYPEDEF_INT64 +typedef signed long long int64; +#endif + +/*----------------------- define float32/64, float_t -----------------------*/ + +#ifndef TYPEDEF_FLOAT32 +typedef float float32; +#endif + +#ifndef TYPEDEF_FLOAT64 +typedef double float64; +#endif + +/* + * abstracted floating point type allows for compile time selection of + * single or double precision arithmetic. Compiling with -DFLOAT32 + * selects single precision; the default is double precision. + */ + +#ifndef TYPEDEF_FLOAT_T + +#if defined(FLOAT32) +typedef float32 float_t; +#else /* default to double precision floating point */ +typedef float64 float_t; +#endif + +#endif /* TYPEDEF_FLOAT_T */ + +/*----------------------- define macro values -----------------------------*/ + +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef NULL +#define NULL 0 +#endif + +#ifndef OFF +#define OFF 0 +#endif + +#ifndef ON +#define ON 1 +#endif + +/*----------------------- define PTRSZ, INLINE ----------------------------*/ + +#ifndef PTRSZ +#define PTRSZ sizeof (char*) +#endif + +#ifndef INLINE + +#ifdef _MSC_VER + +#define INLINE __inline + +#elif __GNUC__ + +#define INLINE __inline__ + +#else + +#define INLINE + +#endif /* _MSC_VER */ + +#endif /* INLINE */ + +#undef TYPEDEF_BOOL +#undef TYPEDEF_UCHAR +#undef TYPEDEF_USHORT +#undef TYPEDEF_UINT +#undef TYPEDEF_ULONG +#undef TYPEDEF_UINT8 +#undef TYPEDEF_UINT16 +#undef TYPEDEF_UINT32 +#undef TYPEDEF_UINT64 +#undef TYPEDEF_INT8 +#undef TYPEDEF_INT16 +#undef TYPEDEF_INT32 +#undef TYPEDEF_INT64 +#undef TYPEDEF_FLOAT32 +#undef TYPEDEF_FLOAT64 +#undef TYPEDEF_FLOAT_T + +#endif /* USE_TYPEDEF_DEFAULTS */ + +#endif /* _TYPEDEFS_H_ */ diff --git a/package/linux/linux.mk b/package/linux/linux.mk index 15d401fcf3..225683d08d 100644 --- a/package/linux/linux.mk +++ b/package/linux/linux.mk @@ -20,43 +20,47 @@ LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \ ) LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4 +LINUX_BINARY_DRIVER_SITE=http://openwrt.openbsd-geek.de LINUX_SOURCE=linux-$(LINUX_VERSION).tar.bz2 LINUX_KCONFIG=./linux.config LINUX_PATCHES=./kernel-patches +LINUX_KERNEL_SOURCE=./kernel-source LINUX_BINLOC=arch/$(LINUX_KARCH)/brcm-boards/bcm947xx/compressed/vmlinuz # Used by pcmcia-cs and others LINUX_SOURCE_DIR=$(LINUX_DIR)-$(LINUX_VERSION) -# kernel stuff extracted from linksys firmware GPL sourcetree -# WRT54GS_3_37_2_1109_US (shared,include,wl,et) -LINKSYS_KERNEL_SITE=http://openwrt.openbsd-geek.de -LINKSYS_KERNEL_TGZ=linksys-kernel.tar.gz +# binary driver extracted from linksys firmware GPL sourcetree WRT54GS_3_37_2_1109_US +LINUX_BINARY_WL_DRIVER=kernel-binary-wl.tar.gz +LINUX_BINARY_ET_DRIVER=kernel-binary-et.tar.gz TARGET_MODULES_DIR=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION) -$(DL_DIR)/$(LINKSYS_KERNEL_TGZ): - $(WGET) -P $(DL_DIR) $(LINKSYS_KERNEL_SITE)/$(LINKSYS_KERNEL_TGZ) +$(DL_DIR)/$(LINUX_BINARY_WL_DRIVER): + $(WGET) -P $(DL_DIR) $(LINUX_BINARY_DRIVER_SITE)/$(LINUX_BINARY_WL_DRIVER) -$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINKSYS_KERNEL_TGZ) +$(DL_DIR)/$(LINUX_BINARY_ET_DRIVER): + $(WGET) -P $(DL_DIR) $(LINUX_BINARY_DRIVER_SITE)/$(LINUX_BINARY_ET_DRIVER) + +$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) $(DL_DIR)/$(LINUX_BINARY_ET_DRIVER) -mkdir -p $(BUILD_DIR) bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - - # extract linksys binary kernel stuff and include/shared files - zcat $(DL_DIR)/$(LINKSYS_KERNEL_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - ln -sf $(LINUX_DIR)-$(LINUX_VERSION) $(LINUX_DIR) + # extract wlan and lan binary only driver + zcat $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - + zcat $(DL_DIR)/$(LINUX_BINARY_ET_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - touch $(LINUX_DIR)/.unpacked $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked $(PATCH) $(LINUX_DIR) $(LINUX_PATCHES) + # copy kernel source which is maintained in openwrt via cvs + cp -a $(LINUX_KERNEL_SOURCE)/* $(LINUX_DIR) + # copy binary drivers + cp -a $(BUILD_DIR)/wl/*.o $(LINUX_DIR)/drivers/net/wl + cp -a $(BUILD_DIR)/et/*.o $(LINUX_DIR)/drivers/net/et touch $(LINUX_DIR)/.patched $(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched -cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config -#ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y) -# $(SED) "s,rootfstype=jffs2,rootfstype=squashfs," $(LINUX_DIR)/.config -#endif -#ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS),y) -# $(SED) "s,rootfstype=jffs2,rootfstype=squashfs," $(LINUX_DIR)/.config -#endif $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" \ $(LINUX_DIR)/Makefile \ $(LINUX_DIR)/arch/mips/Makefile @@ -106,5 +110,4 @@ linux-dirclean: rm -rf $(LINUX_DIR)-$(LINUX_VERSION) rm -rf $(LINUX_DIR) rm -rf $(BUILD_DIR)/modules - rm -rf $(BUILD_DIR)/linksys-kernel -- cgit v1.2.3