From 660d8f40488715e68c2d8f9147d249fbd9a8ff78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 11 Nov 2022 14:54:46 +0100 Subject: bcm4908: update DTS files with the latest changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The most affecting change is move of files from bcm4908/ to the bcmbca/. That required updating few paths. Signed-off-by: Rafał Miłecki (cherry picked from commit 45ac906c6415cebd12281088da6b06668c057f0a) --- target/linux/bcm4908/image/Makefile | 6 +- target/linux/bcm4908/image/bootfs-bcm4908.its | 2 +- ...dts-bcmbca-update-BCM4908-board-dts-files.patch | 66 + ...m64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch | 2491 ++++++++++++++++++++ ...6-arm64-dts-Add-BCM4908-generic-board-dts.patch | 62 + ...roadcom-bcmbca-bcm4908-add-TWD-block-time.patch | 31 + ...dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch | 46 + ...ts-broadcom-bcm4908-limit-amount-of-GPIOs.patch | 23 - ...roadcom-bcmbca-bcm4908-limit-amount-of-GP.patch | 23 + 9 files changed, 2723 insertions(+), 27 deletions(-) create mode 100644 target/linux/bcm4908/patches-5.4/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch create mode 100644 target/linux/bcm4908/patches-5.4/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch create mode 100644 target/linux/bcm4908/patches-5.4/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch create mode 100644 target/linux/bcm4908/patches-5.4/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch create mode 100644 target/linux/bcm4908/patches-5.4/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch delete mode 100644 target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch create mode 100644 target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch diff --git a/target/linux/bcm4908/image/Makefile b/target/linux/bcm4908/image/Makefile index a6c31d50ee..cdb6f3ea1f 100644 --- a/target/linux/bcm4908/image/Makefile +++ b/target/linux/bcm4908/image/Makefile @@ -77,7 +77,7 @@ endef define Device/asus_gt-ac5300 DEVICE_VENDOR := Asus DEVICE_MODEL := GT-AC5300 - DEVICE_DTS := broadcom/bcm4908/bcm4908-asus-gt-ac5300 + DEVICE_DTS := broadcom/bcmbca/bcm4908-asus-gt-ac5300 IMAGES := bin IMAGE/bin := append-ubi | bcm4908img | bcm4908asus ASUS_PRODUCTID := GT-AC5300 @@ -100,7 +100,7 @@ endef define Device/netgear_r8000p DEVICE_VENDOR := Netgear DEVICE_MODEL := R8000P - DEVICE_DTS := broadcom/bcm4908/bcm4906-netgear-r8000p + DEVICE_DTS := broadcom/bcmbca/bcm4906-netgear-r8000p IMAGES := bin IMAGE/chk := append-ubi | bcm4908img | netgear-chk NETGEAR_BOARD_ID := U12H359T00_NETGEAR @@ -112,7 +112,7 @@ define Device/tplink_archer-c2300-v1 DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer C2300 DEVICE_VARIANT := v1 - DEVICE_DTS := broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1 + DEVICE_DTS := broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1 IMAGES := bin IMAGE/bin := append-ubi | bcm4908img BROKEN := y diff --git a/target/linux/bcm4908/image/bootfs-bcm4908.its b/target/linux/bcm4908/image/bootfs-bcm4908.its index d5ac21fd6a..2086fc7ec9 100644 --- a/target/linux/bcm4908/image/bootfs-bcm4908.its +++ b/target/linux/bcm4908/image/bootfs-bcm4908.its @@ -25,7 +25,7 @@ fdt_linux_RAX220 { description = "dtb"; - data = /incbin/("${dts_dir}/broadcom/bcm4908/bcm4908-netgear-raxe500.dtb"); + data = /incbin/("${dts_dir}/broadcom/bcmbca/bcm4908-netgear-raxe500.dtb"); arch = "arm64"; type = "flat_dt"; compression = "none"; diff --git a/target/linux/bcm4908/patches-5.4/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch b/target/linux/bcm4908/patches-5.4/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch new file mode 100644 index 0000000000..d4b7a983de --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch @@ -0,0 +1,66 @@ +From 4fdcbde682291fba2c3f45a41decd656d92a314f Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 3 Aug 2022 10:54:49 -0700 +Subject: [PATCH] arm64: dts: bcmbca: update BCM4908 board dts files +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Append "brcm,bcmbca" to compatible strings based on the new bcmbca +binding rule for BCM4908 family based boards. + +Signed-off-by: William Zhang +Acked-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20220803175455.47638-4-william.zhang@broadcom.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +- + .../dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 2 +- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +- + .../arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +@@ -7,7 +7,7 @@ + #include "bcm4906.dtsi" + + / { +- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; ++ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear R8000P"; + + memory@0 { +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +@@ -7,7 +7,7 @@ + #include "bcm4906.dtsi" + + / { +- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; ++ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +@@ -7,7 +7,7 @@ + #include "bcm4908.dtsi" + + / { +- compatible = "asus,gt-ac5300", "brcm,bcm4908"; ++ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; + model = "Asus GT-AC5300"; + + memory@0 { +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +@@ -3,7 +3,7 @@ + #include "bcm4908.dtsi" + + / { +- compatible = "netgear,raxe500", "brcm,bcm4908"; ++ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear RAXE500"; + + memory@0 { diff --git a/target/linux/bcm4908/patches-5.4/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch b/target/linux/bcm4908/patches-5.4/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch new file mode 100644 index 0000000000..8363b2984c --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch @@ -0,0 +1,2491 @@ +From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 3 Aug 2022 10:54:50 -0700 +Subject: [PATCH] arm64: dts: Move BCM4908 dts to bcmbca folder + +As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts +files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the +BCM4908 board dts. Delete bcm4908 folder and its makefile as well. + +Signed-off-by: William Zhang +Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/Makefile | 1 - + arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 ----- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 ++++ + .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts | 0 + .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts | 0 + .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0 + .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts | 0 + .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0 + .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0 + 9 files changed, 4 insertions(+), 6 deletions(-) + delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%) + +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -4,7 +4,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp + bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dtb + +-subdir-y += bcm4908 + subdir-y += bcmbca + subdir-y += northstar2 + subdir-y += stingray +--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile ++++ /dev/null +@@ -1,5 +0,0 @@ +-# SPDX-License-Identifier: GPL-2.0 +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -1,5 +1,9 @@ + # SPDX-License-Identifier: GPL-2.0 + dtb-$(CONFIG_ARCH_BCMBCA) += \ ++ bcm4906-netgear-r8000p.dtb \ ++ bcm4906-tplink-archer-c2300-v1.dtb \ ++ bcm4908-asus-gt-ac5300.dtb \ ++ bcm4908-netgear-raxe500.dtb \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ + bcm963158.dtb \ +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts ++++ /dev/null +@@ -1,157 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include +-#include +-#include +- +-#include "bcm4906.dtsi" +- +-/ { +- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; +- model = "Netgear R8000P"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x20000000>; +- }; +- +- leds { +- compatible = "gpio-leds"; +- +- led-power-white { +- function = LED_FUNCTION_POWER; +- color = ; +- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; +- }; +- +- led-power-amber { +- function = LED_FUNCTION_POWER; +- color = ; +- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; +- }; +- +- led-wps { +- function = LED_FUNCTION_WPS; +- color = ; +- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; +- }; +- +- led-2ghz { +- function = "2ghz"; +- color = ; +- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; +- }; +- +- led-5ghz-1 { +- function = "5ghz-1"; +- color = ; +- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; +- }; +- +- led-5ghz-2 { +- function = "5ghz-2"; +- color = ; +- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb2 { +- function = "usb2"; +- color = ; +- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb3 { +- function = "usb3"; +- color = ; +- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; +- }; +- +- led-wifi { +- function = "wifi"; +- color = ; +- gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; +- }; +- }; +-}; +- +-&enet { +- nvmem-cells = <&base_mac_addr>; +- nvmem-cell-names = "mac-address"; +-}; +- +-&usb_phy { +- brcm,ioc = <1>; +- status = "okay"; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan4"; +- }; +- +- port@1 { +- label = "lan3"; +- }; +- +- port@2 { +- label = "lan2"; +- }; +- +- port@3 { +- label = "lan1"; +- }; +- +- port@7 { +- reg = <7>; +- phy-mode = "internal"; +- phy-handle = <&phy12>; +- label = "wan"; +- }; +-}; +- +-&nandcs { +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-on-flash-bbt; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- compatible = "nvmem-cells"; +- label = "cferom"; +- reg = <0x0 0x100000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0 0x0 0x100000>; +- +- base_mac_addr: mac@106a0 { +- reg = <0x106a0 0x6>; +- }; +- }; +- +- partition@100000 { +- compatible = "brcm,bcm4908-firmware"; +- label = "firmware"; +- reg = <0x100000 0x4400000>; +- }; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts ++++ /dev/null +@@ -1,182 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include +-#include +-#include +- +-#include "bcm4906.dtsi" +- +-/ { +- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; +- model = "TP-Link Archer C2300 V1"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x20000000>; +- }; +- +- leds { +- compatible = "gpio-leds"; +- +- led-power { +- function = LED_FUNCTION_POWER; +- color = ; +- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; +- }; +- +- led-2ghz { +- function = "2ghz"; +- color = ; +- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; +- }; +- +- led-5ghz { +- function = "5ghz"; +- color = ; +- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; +- }; +- +- led-wan-amber { +- function = LED_FUNCTION_WAN; +- color = ; +- gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; +- }; +- +- led-wan-blue { +- function = LED_FUNCTION_WAN; +- color = ; +- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; +- }; +- +- led-lan { +- function = LED_FUNCTION_LAN; +- color = ; +- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; +- }; +- +- led-wps { +- function = LED_FUNCTION_WPS; +- color = ; +- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb2 { +- function = "usb2"; +- color = ; +- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb3 { +- function = "usbd3"; +- color = ; +- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; +- }; +- +- led-brightness { +- function = LED_FUNCTION_BACKLIGHT; +- color = ; +- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; +- }; +- }; +- +- gpio-keys-polled { +- compatible = "gpio-keys-polled"; +- poll-interval = <100>; +- +- key-brightness { +- label = "LEDs"; +- linux,code = ; +- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; +- }; +- +- key-wps { +- label = "WPS"; +- linux,code = ; +- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; +- }; +- +- key-wifi { +- label = "WiFi"; +- linux,code = ; +- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; +- }; +- +- key-restart { +- label = "Reset"; +- linux,code = ; +- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; +- }; +- }; +-}; +- +-&usb_phy { +- brcm,ioc = <1>; +- status = "okay"; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan4"; +- }; +- +- port@1 { +- label = "lan3"; +- }; +- +- port@2 { +- label = "lan2"; +- }; +- +- port@3 { +- label = "lan1"; +- }; +- +- port@7 { +- reg = <7>; +- phy-mode = "internal"; +- phy-handle = <&phy12>; +- label = "wan"; +- }; +-}; +- +-&nandcs { +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-on-flash-bbt; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- partitions { +- compatible = "brcm,bcm4908-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "cferom"; +- reg = <0x0 0x100000>; +- }; +- +- partition@100000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x100000 0x3900000>; +- }; +- +- partition@5800000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x3a00000 0x3900000>; +- }; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi ++++ /dev/null +@@ -1,26 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include "bcm4908.dtsi" +- +-/ { +- cpus { +- /delete-node/ cpu@2; +- +- /delete-node/ cpu@3; +- }; +- +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = , +- , +- , +- ; +- }; +- +- pmu { +- compatible = "arm,cortex-a53-pmu"; +- interrupts = , +- ; +- interrupt-affinity = <&cpu0>, <&cpu1>; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts ++++ /dev/null +@@ -1,207 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include +-#include +-#include +- +-#include "bcm4908.dtsi" +- +-/ { +- compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; +- model = "Asus GT-AC5300"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x40000000>; +- }; +- +- gpio-keys-polled { +- compatible = "gpio-keys-polled"; +- poll-interval = <100>; +- +- key-wifi { +- label = "WiFi"; +- linux,code = ; +- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; +- }; +- +- key-wps { +- label = "WPS"; +- linux,code = ; +- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; +- }; +- +- key-restart { +- label = "Reset"; +- linux,code = ; +- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; +- }; +- +- key-brightness { +- label = "LEDs"; +- linux,code = ; +- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; +- }; +- }; +-}; +- +-&enet { +- nvmem-cells = <&base_mac_addr>; +- nvmem-cell-names = "mac-address"; +-}; +- +-&usb_phy { +- brcm,ioc = <1>; +- status = "okay"; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan2"; +- }; +- +- port@1 { +- label = "lan1"; +- }; +- +- port@2 { +- label = "lan6"; +- }; +- +- port@3 { +- label = "lan5"; +- }; +- +- /* External BCM53134S switch */ +- port@7 { +- label = "sw"; +- reg = <7>; +- phy-mode = "rgmii"; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +-}; +- +-&mdio { +- /* lan8 */ +- ethernet-phy@0 { +- reg = <0>; +- }; +- +- /* lan7 */ +- ethernet-phy@1 { +- reg = <1>; +- }; +- +- /* lan4 */ +- ethernet-phy@2 { +- reg = <2>; +- }; +- +- /* lan3 */ +- ethernet-phy@3 { +- reg = <3>; +- }; +-}; +- +-&leds { +- led-power@11 { +- reg = <0x11>; +- function = LED_FUNCTION_POWER; +- color = ; +- default-state = "on"; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_17_a>; +- }; +- +- led-wan-red@12 { +- reg = <0x12>; +- function = LED_FUNCTION_WAN; +- color = ; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_18_a>; +- }; +- +- led-wps@14 { +- reg = <0x14>; +- function = LED_FUNCTION_WPS; +- color = ; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_20_a>; +- }; +- +- led-wan-white@15 { +- reg = <0x15>; +- function = LED_FUNCTION_WAN; +- color = ; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_21_a>; +- }; +- +- led-lan@19 { +- reg = <0x19>; +- function = LED_FUNCTION_LAN; +- color = ; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_25_a>; +- }; +-}; +- +-&nandcs { +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-on-flash-bbt; +- brcm,nand-has-wp; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- partitions { +- compatible = "brcm,bcm4908-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- compatible = "nvmem-cells"; +- label = "cferom"; +- reg = <0x0 0x100000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0 0x0 0x100000>; +- +- base_mac_addr: mac@106a0 { +- reg = <0x106a0 0x6>; +- }; +- }; +- +- partition@100000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x100000 0x5700000>; +- }; +- +- partition@5800000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x5800000 0x5700000>; +- }; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts ++++ /dev/null +@@ -1,50 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include "bcm4908.dtsi" +- +-/ { +- compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; +- model = "Netgear RAXE500"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x40000000>; +- }; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan4"; +- }; +- +- port@1 { +- label = "lan3"; +- }; +- +- port@2 { +- label = "lan2"; +- }; +- +- port@3 { +- label = "lan1"; +- }; +- +- port@7 { +- reg = <7>; +- phy-mode = "internal"; +- phy-handle = <&phy12>; +- label = "wan"; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ /dev/null +@@ -1,575 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include +-#include +-#include +-#include +- +-/dts-v1/; +- +-/ { +- interrupt-parent = <&gic>; +- +- #address-cells = <2>; +- #size-cells = <2>; +- +- aliases { +- serial0 = &uart0; +- }; +- +- chosen { +- stdout-path = "serial0:115200n8"; +- }; +- +- cpus { +- #address-cells = <1>; +- #size-cells = <0>; +- +- cpu0: cpu@0 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x0>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- cpu1: cpu@1 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x1>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- cpu2: cpu@2 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x2>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- cpu3: cpu@3 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x3>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- l2: l2-cache0 { +- compatible = "cache"; +- }; +- }; +- +- axi@81000000 { +- compatible = "simple-bus"; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x00 0x81000000 0x4000>; +- +- gic: interrupt-controller@1000 { +- compatible = "arm,gic-400"; +- #interrupt-cells = <3>; +- #address-cells = <0>; +- interrupt-controller; +- reg = <0x1000 0x1000>, +- <0x2000 0x2000>; +- }; +- }; +- +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = , +- , +- , +- ; +- }; +- +- pmu { +- compatible = "arm,cortex-a53-pmu"; +- interrupts = , +- , +- , +- ; +- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +- }; +- +- clocks { +- periph_clk: periph_clk { +- compatible = "fixed-clock"; +- #clock-cells = <0>; +- clock-frequency = <50000000>; +- clock-output-names = "periph"; +- }; +- }; +- +- soc { +- compatible = "simple-bus"; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x00 0x80000000 0x281000>; +- +- enet: ethernet@2000 { +- compatible = "brcm,bcm4908-enet"; +- reg = <0x2000 0x1000>; +- +- interrupts = , +- ; +- interrupt-names = "rx", "tx"; +- }; +- +- usb_phy: usb-phy@c200 { +- compatible = "brcm,bcm4908-usb-phy"; +- reg = <0xc200 0x100>; +- reg-names = "ctrl"; +- power-domains = <&pmb BCM_PMB_HOST_USB>; +- dr_mode = "host"; +- brcm,has-xhci; +- brcm,has-eohci; +- #phy-cells = <1>; +- status = "disabled"; +- }; +- +- ehci: usb@c300 { +- compatible = "generic-ehci"; +- reg = <0xc300 0x100>; +- interrupts = ; +- phys = <&usb_phy PHY_TYPE_USB2>; +- status = "disabled"; +- }; +- +- ohci: usb@c400 { +- compatible = "generic-ohci"; +- reg = <0xc400 0x100>; +- interrupts = ; +- phys = <&usb_phy PHY_TYPE_USB2>; +- status = "disabled"; +- }; +- +- xhci: usb@d000 { +- compatible = "generic-xhci"; +- reg = <0xd000 0x8c8>; +- interrupts = ; +- phys = <&usb_phy PHY_TYPE_USB3>; +- status = "disabled"; +- }; +- +- bus@80000 { +- compatible = "simple-bus"; +- #size-cells = <1>; +- #address-cells = <1>; +- ranges = <0 0x80000 0x50000>; +- +- ethernet-switch@0 { +- compatible = "brcm,bcm4908-switch"; +- reg = <0x0 0x40000>, +- <0x40000 0x110>, +- <0x40340 0x30>, +- <0x40380 0x30>, +- <0x40600 0x34>, +- <0x40800 0x208>; +- reg-names = "core", "reg", "intrl2_0", +- "intrl2_1", "fcb", "acb"; +- interrupts = , +- ; +- brcm,num-gphy = <5>; +- brcm,num-rgmii-ports = <2>; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- ports: ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- port@0 { +- reg = <0>; +- phy-mode = "internal"; +- phy-handle = <&phy8>; +- }; +- +- port@1 { +- reg = <1>; +- phy-mode = "internal"; +- phy-handle = <&phy9>; +- }; +- +- port@2 { +- reg = <2>; +- phy-mode = "internal"; +- phy-handle = <&phy10>; +- }; +- +- port@3 { +- reg = <3>; +- phy-mode = "internal"; +- phy-handle = <&phy11>; +- }; +- +- port@8 { +- reg = <8>; +- phy-mode = "internal"; +- ethernet = <&enet>; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +- }; +- }; +- +- mdio: mdio@405c0 { +- compatible = "brcm,unimac-mdio"; +- reg = <0x405c0 0x8>; +- reg-names = "mdio"; +- #size-cells = <0>; +- #address-cells = <1>; +- +- phy8: ethernet-phy@8 { +- reg = <8>; +- }; +- +- phy9: ethernet-phy@9 { +- reg = <9>; +- }; +- +- phy10: ethernet-phy@a { +- reg = <10>; +- }; +- +- phy11: ethernet-phy@b { +- reg = <11>; +- }; +- +- phy12: ethernet-phy@c { +- reg = <12>; +- }; +- }; +- }; +- +- procmon: syscon@280000 { +- compatible = "simple-bus"; +- reg = <0x280000 0x1000>; +- ranges; +- +- #address-cells = <1>; +- #size-cells = <1>; +- +- pmb: power-controller@2800c0 { +- compatible = "brcm,bcm4908-pmb"; +- reg = <0x2800c0 0x40>; +- #power-domain-cells = <1>; +- }; +- }; +- }; +- +- bus@ff800000 { +- compatible = "simple-bus"; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x00 0xff800000 0x3000>; +- +- twd: timer-mfd@400 { +- compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; +- reg = <0x400 0x4c>; +- ranges = <0x0 0x400 0x4c>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- +- watchdog@28 { +- compatible = "brcm,bcm6345-wdt"; +- reg = <0x28 0x8>; +- }; +- }; +- +- gpio0: gpio-controller@500 { +- compatible = "brcm,bcm6345-gpio"; +- reg-names = "dirout", "dat"; +- reg = <0x500 0x28>, <0x528 0x28>; +- +- #gpio-cells = <2>; +- gpio-controller; +- }; +- +- pinctrl@560 { +- compatible = "brcm,bcm4908-pinctrl"; +- reg = <0x560 0x10>; +- +- pins_led_0_a: led_0-a-pins { +- function = "led_0"; +- groups = "led_0_grp_a"; +- }; +- +- pins_led_1_a: led_1-a-pins { +- function = "led_1"; +- groups = "led_1_grp_a"; +- }; +- +- pins_led_2_a: led_2-a-pins { +- function = "led_2"; +- groups = "led_2_grp_a"; +- }; +- +- pins_led_3_a: led_3-a-pins { +- function = "led_3"; +- groups = "led_3_grp_a"; +- }; +- +- pins_led_4_a: led_4-a-pins { +- function = "led_4"; +- groups = "led_4_grp_a"; +- }; +- +- pins_led_5_a: led_5-a-pins { +- function = "led_5"; +- groups = "led_5_grp_a"; +- }; +- +- pins_led_6_a: led_6-a-pins { +- function = "led_6"; +- groups = "led_6_grp_a"; +- }; +- +- pins_led_7_a: led_7-a-pins { +- function = "led_7"; +- groups = "led_7_grp_a"; +- }; +- +- pins_led_8_a: led_8-a-pins { +- function = "led_8"; +- groups = "led_8_grp_a"; +- }; +- +- pins_led_9_a: led_9-a-pins { +- function = "led_9"; +- groups = "led_9_grp_a"; +- }; +- +- pins_led_10_a: led_10-a-pins { +- function = "led_10"; +- groups = "led_10_grp_a"; +- }; +- +- pins_led_11_a: led_11-a-pins { +- function = "led_11"; +- groups = "led_11_grp_a"; +- }; +- +- pins_led_12_a: led_12-a-pins { +- function = "led_12"; +- groups = "led_12_grp_a"; +- }; +- +- pins_led_13_a: led_13-a-pins { +- function = "led_13"; +- groups = "led_13_grp_a"; +- }; +- +- pins_led_14_a: led_14-a-pins { +- function = "led_14"; +- groups = "led_14_grp_a"; +- }; +- +- pins_led_15_a: led_15-a-pins { +- function = "led_15"; +- groups = "led_15_grp_a"; +- }; +- +- pins_led_16_a: led_16-a-pins { +- function = "led_16"; +- groups = "led_16_grp_a"; +- }; +- +- pins_led_17_a: led_17-a-pins { +- function = "led_17"; +- groups = "led_17_grp_a"; +- }; +- +- pins_led_18_a: led_18-a-pins { +- function = "led_18"; +- groups = "led_18_grp_a"; +- }; +- +- pins_led_19_a: led_19-a-pins { +- function = "led_19"; +- groups = "led_19_grp_a"; +- }; +- +- pins_led_20_a: led_20-a-pins { +- function = "led_20"; +- groups = "led_20_grp_a"; +- }; +- +- pins_led_21_a: led_21-a-pins { +- function = "led_21"; +- groups = "led_21_grp_a"; +- }; +- +- pins_led_22_a: led_22-a-pins { +- function = "led_22"; +- groups = "led_22_grp_a"; +- }; +- +- pins_led_23_a: led_23-a-pins { +- function = "led_23"; +- groups = "led_23_grp_a"; +- }; +- +- pins_led_24_a: led_24-a-pins { +- function = "led_24"; +- groups = "led_24_grp_a"; +- }; +- +- pins_led_25_a: led_25-a-pins { +- function = "led_25"; +- groups = "led_25_grp_a"; +- }; +- +- pins_led_26_a: led_26-a-pins { +- function = "led_26"; +- groups = "led_26_grp_a"; +- }; +- +- pins_led_27_a: led_27-a-pins { +- function = "led_27"; +- groups = "led_27_grp_a"; +- }; +- +- pins_led_28_a: led_28-a-pins { +- function = "led_28"; +- groups = "led_28_grp_a"; +- }; +- +- pins_led_29_a: led_29-a-pins { +- function = "led_29"; +- groups = "led_29_grp_a"; +- }; +- +- pins_led_30_a: led_30-a-pins { +- function = "led_30"; +- groups = "led_30_grp_a"; +- }; +- +- pins_led_31_a: led_31-a-pins { +- function = "led_31"; +- groups = "led_31_grp_a"; +- }; +- +- pins_hs_uart: hs_uart-pins { +- function = "hs_uart"; +- groups = "hs_uart_grp"; +- }; +- +- pins_i2c_a: i2c-a-pins { +- function = "i2c"; +- groups = "i2c_grp_a"; +- }; +- +- pins_i2c_b: i2c-b-pins { +- function = "i2c"; +- groups = "i2c_grp_b"; +- }; +- +- pins_i2s: i2s-pins { +- function = "i2s"; +- groups = "i2s_grp"; +- }; +- +- pins_nand_ctrl: nand_ctrl-pins { +- function = "nand_ctrl"; +- groups = "nand_ctrl_grp"; +- }; +- +- pins_nand_data: nand_data-pins { +- function = "nand_data"; +- groups = "nand_data_grp"; +- }; +- +- pins_emmc_ctrl: emmc_ctrl-pins { +- function = "emmc_ctrl"; +- groups = "emmc_ctrl_grp"; +- }; +- +- pins_usb0_pwr: usb0_pwr-pins { +- function = "usb0_pwr"; +- groups = "usb0_pwr_grp"; +- }; +- +- pins_usb1_pwr: usb1_pwr-pins { +- function = "usb1_pwr"; +- groups = "usb1_pwr_grp"; +- }; +- }; +- +- uart0: serial@640 { +- compatible = "brcm,bcm6345-uart"; +- reg = <0x640 0x18>; +- interrupts = ; +- clocks = <&periph_clk>; +- clock-names = "refclk"; +- status = "okay"; +- }; +- +- leds: leds@800 { +- compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; +- reg = <0x800 0xdc>; +- +- #address-cells = <1>; +- #size-cells = <0>; +- }; +- +- nand-controller@1800 { +- #address-cells = <1>; +- #size-cells = <0>; +- compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; +- reg = <0x1800 0x600>, <0x2000 0x10>; +- reg-names = "nand", "nand-int-base"; +- interrupts = ; +- interrupt-names = "nand"; +- status = "okay"; +- +- nandcs: nand@0 { +- compatible = "brcm,nandcs"; +- reg = <0>; +- }; +- }; +- +- i2c@2100 { +- compatible = "brcm,brcmper-i2c"; +- reg = <0x2100 0x58>; +- clock-frequency = <97500>; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_i2c_a>; +- status = "disabled"; +- }; +- +- misc@2600 { +- compatible = "brcm,misc", "simple-mfd"; +- reg = <0x2600 0xe4>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x2600 0xe4>; +- +- reset-controller@2644 { +- compatible = "brcm,bcm4908-misc-pcie-reset"; +- reg = <0x44 0x04>; +- #reset-cells = <1>; +- }; +- }; +- }; +- +- reboot { +- compatible = "syscon-reboot"; +- regmap = <&twd>; +- offset = <0x34>; +- mask = <1>; +- }; +-}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +@@ -0,0 +1,157 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include ++#include ++#include ++ ++#include "bcm4906.dtsi" ++ ++/ { ++ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "Netgear R8000P"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-power-white { ++ function = LED_FUNCTION_POWER; ++ color = ; ++ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-power-amber { ++ function = LED_FUNCTION_POWER; ++ color = ; ++ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wps { ++ function = LED_FUNCTION_WPS; ++ color = ; ++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2ghz { ++ function = "2ghz"; ++ color = ; ++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5ghz-1 { ++ function = "5ghz-1"; ++ color = ; ++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5ghz-2 { ++ function = "5ghz-2"; ++ color = ; ++ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb2 { ++ function = "usb2"; ++ color = ; ++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb3 { ++ function = "usb3"; ++ color = ; ++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wifi { ++ function = "wifi"; ++ color = ; ++ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&enet { ++ nvmem-cells = <&base_mac_addr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&usb_phy { ++ brcm,ioc = <1>; ++ status = "okay"; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; ++ ++&nandcs { ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-on-flash-bbt; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ compatible = "nvmem-cells"; ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 0x0 0x100000>; ++ ++ base_mac_addr: mac@106a0 { ++ reg = <0x106a0 0x6>; ++ }; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ label = "firmware"; ++ reg = <0x100000 0x4400000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +@@ -0,0 +1,182 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include ++#include ++#include ++ ++#include "bcm4906.dtsi" ++ ++/ { ++ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "TP-Link Archer C2300 V1"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-power { ++ function = LED_FUNCTION_POWER; ++ color = ; ++ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2ghz { ++ function = "2ghz"; ++ color = ; ++ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5ghz { ++ function = "5ghz"; ++ color = ; ++ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wan-amber { ++ function = LED_FUNCTION_WAN; ++ color = ; ++ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led-wan-blue { ++ function = LED_FUNCTION_WAN; ++ color = ; ++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-lan { ++ function = LED_FUNCTION_LAN; ++ color = ; ++ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wps { ++ function = LED_FUNCTION_WPS; ++ color = ; ++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb2 { ++ function = "usb2"; ++ color = ; ++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb3 { ++ function = "usbd3"; ++ color = ; ++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-brightness { ++ function = LED_FUNCTION_BACKLIGHT; ++ color = ; ++ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-keys-polled { ++ compatible = "gpio-keys-polled"; ++ poll-interval = <100>; ++ ++ key-brightness { ++ label = "LEDs"; ++ linux,code = ; ++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-wps { ++ label = "WPS"; ++ linux,code = ; ++ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-wifi { ++ label = "WiFi"; ++ linux,code = ; ++ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&usb_phy { ++ brcm,ioc = <1>; ++ status = "okay"; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; ++ ++&nandcs { ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-on-flash-bbt; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ partitions { ++ compatible = "brcm,bcm4908-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x100000 0x3900000>; ++ }; ++ ++ partition@5800000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x3a00000 0x3900000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi +@@ -0,0 +1,26 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ cpus { ++ /delete-node/ cpu@2; ++ ++ /delete-node/ cpu@3; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ ; ++ interrupt-affinity = <&cpu0>, <&cpu1>; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +@@ -0,0 +1,207 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include ++#include ++#include ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "Asus GT-AC5300"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x40000000>; ++ }; ++ ++ gpio-keys-polled { ++ compatible = "gpio-keys-polled"; ++ poll-interval = <100>; ++ ++ key-wifi { ++ label = "WiFi"; ++ linux,code = ; ++ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-wps { ++ label = "WPS"; ++ linux,code = ; ++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-brightness { ++ label = "LEDs"; ++ linux,code = ; ++ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&enet { ++ nvmem-cells = <&base_mac_addr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&usb_phy { ++ brcm,ioc = <1>; ++ status = "okay"; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan2"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan6"; ++ }; ++ ++ port@3 { ++ label = "lan5"; ++ }; ++ ++ /* External BCM53134S switch */ ++ port@7 { ++ label = "sw"; ++ reg = <7>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++}; ++ ++&mdio { ++ /* lan8 */ ++ ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ /* lan7 */ ++ ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ /* lan4 */ ++ ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ /* lan3 */ ++ ethernet-phy@3 { ++ reg = <3>; ++ }; ++}; ++ ++&leds { ++ led-power@11 { ++ reg = <0x11>; ++ function = LED_FUNCTION_POWER; ++ color = ; ++ default-state = "on"; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_17_a>; ++ }; ++ ++ led-wan-red@12 { ++ reg = <0x12>; ++ function = LED_FUNCTION_WAN; ++ color = ; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_18_a>; ++ }; ++ ++ led-wps@14 { ++ reg = <0x14>; ++ function = LED_FUNCTION_WPS; ++ color = ; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_20_a>; ++ }; ++ ++ led-wan-white@15 { ++ reg = <0x15>; ++ function = LED_FUNCTION_WAN; ++ color = ; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_21_a>; ++ }; ++ ++ led-lan@19 { ++ reg = <0x19>; ++ function = LED_FUNCTION_LAN; ++ color = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_25_a>; ++ }; ++}; ++ ++&nandcs { ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-on-flash-bbt; ++ brcm,nand-has-wp; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ partitions { ++ compatible = "brcm,bcm4908-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ compatible = "nvmem-cells"; ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 0x0 0x100000>; ++ ++ base_mac_addr: mac@106a0 { ++ reg = <0x106a0 0x6>; ++ }; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x100000 0x5700000>; ++ }; ++ ++ partition@5800000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x5800000 0x5700000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts +@@ -0,0 +1,50 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "Netgear RAXE500"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x40000000>; ++ }; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +@@ -0,0 +1,575 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include ++#include ++#include ++#include ++ ++/dts-v1/; ++ ++/ { ++ interrupt-parent = <&gic>; ++ ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x0>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x1>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x2>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x3>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ l2: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x00 0x81000000 0x4000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ #address-cells = <0>; ++ interrupt-controller; ++ reg = <0x1000 0x1000>, ++ <0x2000 0x2000>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ , ++ , ++ ; ++ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; ++ }; ++ ++ clocks { ++ periph_clk: periph_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <50000000>; ++ clock-output-names = "periph"; ++ }; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x00 0x80000000 0x281000>; ++ ++ enet: ethernet@2000 { ++ compatible = "brcm,bcm4908-enet"; ++ reg = <0x2000 0x1000>; ++ ++ interrupts = , ++ ; ++ interrupt-names = "rx", "tx"; ++ }; ++ ++ usb_phy: usb-phy@c200 { ++ compatible = "brcm,bcm4908-usb-phy"; ++ reg = <0xc200 0x100>; ++ reg-names = "ctrl"; ++ power-domains = <&pmb BCM_PMB_HOST_USB>; ++ dr_mode = "host"; ++ brcm,has-xhci; ++ brcm,has-eohci; ++ #phy-cells = <1>; ++ status = "disabled"; ++ }; ++ ++ ehci: usb@c300 { ++ compatible = "generic-ehci"; ++ reg = <0xc300 0x100>; ++ interrupts = ; ++ phys = <&usb_phy PHY_TYPE_USB2>; ++ status = "disabled"; ++ }; ++ ++ ohci: usb@c400 { ++ compatible = "generic-ohci"; ++ reg = <0xc400 0x100>; ++ interrupts = ; ++ phys = <&usb_phy PHY_TYPE_USB2>; ++ status = "disabled"; ++ }; ++ ++ xhci: usb@d000 { ++ compatible = "generic-xhci"; ++ reg = <0xd000 0x8c8>; ++ interrupts = ; ++ phys = <&usb_phy PHY_TYPE_USB3>; ++ status = "disabled"; ++ }; ++ ++ bus@80000 { ++ compatible = "simple-bus"; ++ #size-cells = <1>; ++ #address-cells = <1>; ++ ranges = <0 0x80000 0x50000>; ++ ++ ethernet-switch@0 { ++ compatible = "brcm,bcm4908-switch"; ++ reg = <0x0 0x40000>, ++ <0x40000 0x110>, ++ <0x40340 0x30>, ++ <0x40380 0x30>, ++ <0x40600 0x34>, ++ <0x40800 0x208>; ++ reg-names = "core", "reg", "intrl2_0", ++ "intrl2_1", "fcb", "acb"; ++ interrupts = , ++ ; ++ brcm,num-gphy = <5>; ++ brcm,num-rgmii-ports = <2>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ports: ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ phy-mode = "internal"; ++ phy-handle = <&phy8>; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ phy-mode = "internal"; ++ phy-handle = <&phy9>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ phy-mode = "internal"; ++ phy-handle = <&phy10>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ phy-mode = "internal"; ++ phy-handle = <&phy11>; ++ }; ++ ++ port@8 { ++ reg = <8>; ++ phy-mode = "internal"; ++ ethernet = <&enet>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ }; ++ ++ mdio: mdio@405c0 { ++ compatible = "brcm,unimac-mdio"; ++ reg = <0x405c0 0x8>; ++ reg-names = "mdio"; ++ #size-cells = <0>; ++ #address-cells = <1>; ++ ++ phy8: ethernet-phy@8 { ++ reg = <8>; ++ }; ++ ++ phy9: ethernet-phy@9 { ++ reg = <9>; ++ }; ++ ++ phy10: ethernet-phy@a { ++ reg = <10>; ++ }; ++ ++ phy11: ethernet-phy@b { ++ reg = <11>; ++ }; ++ ++ phy12: ethernet-phy@c { ++ reg = <12>; ++ }; ++ }; ++ }; ++ ++ procmon: syscon@280000 { ++ compatible = "simple-bus"; ++ reg = <0x280000 0x1000>; ++ ranges; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ pmb: power-controller@2800c0 { ++ compatible = "brcm,bcm4908-pmb"; ++ reg = <0x2800c0 0x40>; ++ #power-domain-cells = <1>; ++ }; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x00 0xff800000 0x3000>; ++ ++ twd: timer-mfd@400 { ++ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; ++ reg = <0x400 0x4c>; ++ ranges = <0x0 0x400 0x4c>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ watchdog@28 { ++ compatible = "brcm,bcm6345-wdt"; ++ reg = <0x28 0x8>; ++ }; ++ }; ++ ++ gpio0: gpio-controller@500 { ++ compatible = "brcm,bcm6345-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x500 0x28>, <0x528 0x28>; ++ ++ #gpio-cells = <2>; ++ gpio-controller; ++ }; ++ ++ pinctrl@560 { ++ compatible = "brcm,bcm4908-pinctrl"; ++ reg = <0x560 0x10>; ++ ++ pins_led_0_a: led_0-a-pins { ++ function = "led_0"; ++ groups = "led_0_grp_a"; ++ }; ++ ++ pins_led_1_a: led_1-a-pins { ++ function = "led_1"; ++ groups = "led_1_grp_a"; ++ }; ++ ++ pins_led_2_a: led_2-a-pins { ++ function = "led_2"; ++ groups = "led_2_grp_a"; ++ }; ++ ++ pins_led_3_a: led_3-a-pins { ++ function = "led_3"; ++ groups = "led_3_grp_a"; ++ }; ++ ++ pins_led_4_a: led_4-a-pins { ++ function = "led_4"; ++ groups = "led_4_grp_a"; ++ }; ++ ++ pins_led_5_a: led_5-a-pins { ++ function = "led_5"; ++ groups = "led_5_grp_a"; ++ }; ++ ++ pins_led_6_a: led_6-a-pins { ++ function = "led_6"; ++ groups = "led_6_grp_a"; ++ }; ++ ++ pins_led_7_a: led_7-a-pins { ++ function = "led_7"; ++ groups = "led_7_grp_a"; ++ }; ++ ++ pins_led_8_a: led_8-a-pins { ++ function = "led_8"; ++ groups = "led_8_grp_a"; ++ }; ++ ++ pins_led_9_a: led_9-a-pins { ++ function = "led_9"; ++ groups = "led_9_grp_a"; ++ }; ++ ++ pins_led_10_a: led_10-a-pins { ++ function = "led_10"; ++ groups = "led_10_grp_a"; ++ }; ++ ++ pins_led_11_a: led_11-a-pins { ++ function = "led_11"; ++ groups = "led_11_grp_a"; ++ }; ++ ++ pins_led_12_a: led_12-a-pins { ++ function = "led_12"; ++ groups = "led_12_grp_a"; ++ }; ++ ++ pins_led_13_a: led_13-a-pins { ++ function = "led_13"; ++ groups = "led_13_grp_a"; ++ }; ++ ++ pins_led_14_a: led_14-a-pins { ++ function = "led_14"; ++ groups = "led_14_grp_a"; ++ }; ++ ++ pins_led_15_a: led_15-a-pins { ++ function = "led_15"; ++ groups = "led_15_grp_a"; ++ }; ++ ++ pins_led_16_a: led_16-a-pins { ++ function = "led_16"; ++ groups = "led_16_grp_a"; ++ }; ++ ++ pins_led_17_a: led_17-a-pins { ++ function = "led_17"; ++ groups = "led_17_grp_a"; ++ }; ++ ++ pins_led_18_a: led_18-a-pins { ++ function = "led_18"; ++ groups = "led_18_grp_a"; ++ }; ++ ++ pins_led_19_a: led_19-a-pins { ++ function = "led_19"; ++ groups = "led_19_grp_a"; ++ }; ++ ++ pins_led_20_a: led_20-a-pins { ++ function = "led_20"; ++ groups = "led_20_grp_a"; ++ }; ++ ++ pins_led_21_a: led_21-a-pins { ++ function = "led_21"; ++ groups = "led_21_grp_a"; ++ }; ++ ++ pins_led_22_a: led_22-a-pins { ++ function = "led_22"; ++ groups = "led_22_grp_a"; ++ }; ++ ++ pins_led_23_a: led_23-a-pins { ++ function = "led_23"; ++ groups = "led_23_grp_a"; ++ }; ++ ++ pins_led_24_a: led_24-a-pins { ++ function = "led_24"; ++ groups = "led_24_grp_a"; ++ }; ++ ++ pins_led_25_a: led_25-a-pins { ++ function = "led_25"; ++ groups = "led_25_grp_a"; ++ }; ++ ++ pins_led_26_a: led_26-a-pins { ++ function = "led_26"; ++ groups = "led_26_grp_a"; ++ }; ++ ++ pins_led_27_a: led_27-a-pins { ++ function = "led_27"; ++ groups = "led_27_grp_a"; ++ }; ++ ++ pins_led_28_a: led_28-a-pins { ++ function = "led_28"; ++ groups = "led_28_grp_a"; ++ }; ++ ++ pins_led_29_a: led_29-a-pins { ++ function = "led_29"; ++ groups = "led_29_grp_a"; ++ }; ++ ++ pins_led_30_a: led_30-a-pins { ++ function = "led_30"; ++ groups = "led_30_grp_a"; ++ }; ++ ++ pins_led_31_a: led_31-a-pins { ++ function = "led_31"; ++ groups = "led_31_grp_a"; ++ }; ++ ++ pins_hs_uart: hs_uart-pins { ++ function = "hs_uart"; ++ groups = "hs_uart_grp"; ++ }; ++ ++ pins_i2c_a: i2c-a-pins { ++ function = "i2c"; ++ groups = "i2c_grp_a"; ++ }; ++ ++ pins_i2c_b: i2c-b-pins { ++ function = "i2c"; ++ groups = "i2c_grp_b"; ++ }; ++ ++ pins_i2s: i2s-pins { ++ function = "i2s"; ++ groups = "i2s_grp"; ++ }; ++ ++ pins_nand_ctrl: nand_ctrl-pins { ++ function = "nand_ctrl"; ++ groups = "nand_ctrl_grp"; ++ }; ++ ++ pins_nand_data: nand_data-pins { ++ function = "nand_data"; ++ groups = "nand_data_grp"; ++ }; ++ ++ pins_emmc_ctrl: emmc_ctrl-pins { ++ function = "emmc_ctrl"; ++ groups = "emmc_ctrl_grp"; ++ }; ++ ++ pins_usb0_pwr: usb0_pwr-pins { ++ function = "usb0_pwr"; ++ groups = "usb0_pwr_grp"; ++ }; ++ ++ pins_usb1_pwr: usb1_pwr-pins { ++ function = "usb1_pwr"; ++ groups = "usb1_pwr_grp"; ++ }; ++ }; ++ ++ uart0: serial@640 { ++ compatible = "brcm,bcm6345-uart"; ++ reg = <0x640 0x18>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ clock-names = "refclk"; ++ status = "okay"; ++ }; ++ ++ leds: leds@800 { ++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; ++ reg = <0x800 0xdc>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ nand-controller@1800 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; ++ reg = <0x1800 0x600>, <0x2000 0x10>; ++ reg-names = "nand", "nand-int-base"; ++ interrupts = ; ++ interrupt-names = "nand"; ++ status = "okay"; ++ ++ nandcs: nand@0 { ++ compatible = "brcm,nandcs"; ++ reg = <0>; ++ }; ++ }; ++ ++ i2c@2100 { ++ compatible = "brcm,brcmper-i2c"; ++ reg = <0x2100 0x58>; ++ clock-frequency = <97500>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_i2c_a>; ++ status = "disabled"; ++ }; ++ ++ misc@2600 { ++ compatible = "brcm,misc", "simple-mfd"; ++ reg = <0x2600 0xe4>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x2600 0xe4>; ++ ++ reset-controller@2644 { ++ compatible = "brcm,bcm4908-misc-pcie-reset"; ++ reg = <0x44 0x04>; ++ #reset-cells = <1>; ++ }; ++ }; ++ }; ++ ++ reboot { ++ compatible = "syscon-reboot"; ++ regmap = <&twd>; ++ offset = <0x34>; ++ mask = <1>; ++ }; ++}; diff --git a/target/linux/bcm4908/patches-5.4/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch b/target/linux/bcm4908/patches-5.4/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch new file mode 100644 index 0000000000..b19c5d33b4 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch @@ -0,0 +1,62 @@ +From 72e0bdb6d7edb1785d58f2e8e7c80e1d2f93a319 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 3 Aug 2022 10:54:51 -0700 +Subject: [PATCH] arm64: dts: Add BCM4908 generic board dts + +Add generic bare bone bcm94908.dts file to support any 4908 based +design. It supports cpu subsystem, memory and an uart console. This can +be useful for board bring-up and cpu subsystem and memory related kernel +test as well. + +Signed-off-by: William Zhang +Link: https://lore.kernel.org/r/20220803175455.47638-6-william.zhang@broadcom.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 1 + + .../boot/dts/broadcom/bcmbca/bcm94908.dts | 30 +++++++++++++++++++ + 2 files changed, 31 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4906-tplink-archer-c2300-v1.dtb \ + bcm4908-asus-gt-ac5300.dtb \ + bcm4908-netgear-raxe500.dtb \ ++ bcm94908.dtb \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ + bcm963158.dtb \ +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ model = "Broadcom BCM94908 Reference Board"; ++ compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.4/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch b/target/linux/bcm4908/patches-5.4/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch new file mode 100644 index 0000000000..a3f49ca440 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch @@ -0,0 +1,31 @@ +From 68064196cffea33f090bd2e8d81cd5e20107ecf1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 3 Nov 2022 11:53:16 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TWD block timer +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 TWD contains block with 4 timers. Add binding for it. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221103105316.21294-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +@@ -283,6 +283,11 @@ + #address-cells = <1>; + #size-cells = <1>; + ++ timer@0 { ++ compatible = "brcm,bcm63138-timer"; ++ reg = <0x0 0x28>; ++ }; ++ + watchdog@28 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x28 0x8>; diff --git a/target/linux/bcm4908/patches-5.4/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch b/target/linux/bcm4908/patches-5.4/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch new file mode 100644 index 0000000000..e8e81ae544 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch @@ -0,0 +1,46 @@ +From 4f9fb09175e87a233787a2dee1e5dabb14deb022 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 3 Nov 2022 12:00:15 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm6858: add TWD block +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM6858 contains TWD block with timers, watchdog, and reset subblocks. +Describe it. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221103110015.21761-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +@@ -109,6 +109,25 @@ + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x62000>; + ++ twd: timer-mfd@400 { ++ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; ++ reg = <0x400 0x4c>; ++ ranges = <0x0 0x400 0x4c>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ timer@0 { ++ compatible = "brcm,bcm63138-timer"; ++ reg = <0x0 0x28>; ++ }; ++ ++ watchdog@28 { ++ compatible = "brcm,bcm6345-wdt"; ++ reg = <0x28 0x8>; ++ }; ++ }; ++ + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; diff --git a/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch b/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch deleted file mode 100644 index 93c89ffa30..0000000000 --- a/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 15 Feb 2021 22:01:03 +0100 -Subject: [PATCH] arm64: dts: broadcom: bcm4908: limit amount of GPIOs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Linux driver can't handle more than 64 GPIOs - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -@@ -292,7 +292,7 @@ - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; -- reg = <0x500 0x28>, <0x528 0x28>; -+ reg = <0x500 0x8>, <0x528 0x8>; - - #gpio-cells = <2>; - gpio-controller; diff --git a/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch b/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch new file mode 100644 index 0000000000..bc0743c800 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch @@ -0,0 +1,23 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 Feb 2021 22:01:03 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: limit amount of GPIOs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Linux driver can't handle more than 64 GPIOs + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +@@ -297,7 +297,7 @@ + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; +- reg = <0x500 0x28>, <0x528 0x28>; ++ reg = <0x500 0x8>, <0x528 0x8>; + + #gpio-cells = <2>; + gpio-controller; -- cgit v1.2.3