From 4b0fbf30726cf6807508b7025fef023439e07572 Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Sun, 8 Feb 2015 15:42:42 +0000
Subject: ramips: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44324
---
...t_mode-to-enable-disable-the-cevt-r4k-irq.patch | 2 +-
...021-MIPS-ralink-add-cpu-frequency-scaling.patch | 4 +-
.../0030-pinctrl-ralink-add-pinctrl-driver.patch | 55 ++++++++++------------
.../0040-USB-add-mt7621-xhci-support.patch | 12 ++---
.../0044-mtd-add-chunked-read-io-to-m25p80.patch | 12 ++---
.../0051-rt5350-spi-second-device.patch | 4 +-
.../0057-uvc-add-iPassion-iP2970-support.patch | 2 +-
.../0058-GPIO-add-named-gpio-exports.patch | 18 +++----
target/linux/ramips/patches-3.14/999-gpi_irq.patch | 2 +-
9 files changed, 54 insertions(+), 57 deletions(-)
diff --git a/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
index 1423a3acc7..a3b4e4a70f 100644
--- a/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ b/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -24,7 +24,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
int cp0_timer_irq_installed;
-@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction =
+@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction =
.name = "timer",
};
diff --git a/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
index ea1d03aad3..0e567cb2f0 100644
--- a/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
+++ b/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
@@ -55,7 +55,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
static void systick_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
-@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum
+@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum
sdev->irq_requested = 1;
iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
systick.membase + SYSTICK_CONFIG);
@@ -69,7 +69,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
if (sdev->irq_requested)
free_irq(systick.dev.irq, &systick_irqaction);
sdev->irq_requested = 0;
-@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum
+@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum
}
}
diff --git a/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch
index b9fb54fcdd..4d3843faef 100644
--- a/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch
+++ b/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch
@@ -330,7 +330,25 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
- .gpio_first = 72,
- .gpio_last = 72,
- }, {0}
--};
++static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
++static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
++static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
++static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
++static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
++static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
++static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
++static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
++static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
++static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
++static struct rt2880_pmx_func uartf_grp[] = {
++ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
++ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
++ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
++ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
++ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
++ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
++ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
+ };
-
-static struct ralink_pinmux_grp uart_mux[] = {
- {
@@ -372,32 +390,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
- .name = "gpio",
- .mask = MT7620_GPIO_MODE_GPIO,
- }, {0}
--};
--
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
-+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-+static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-+static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-+static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-+static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-+static struct rt2880_pmx_func uartf_grp[] = {
-+ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
-+};
+static struct rt2880_pmx_func wdt_grp[] = {
+ FUNC("wdt rst", 0, 17, 1),
+ FUNC("wdt refclk", 0, 17, 1),
@@ -409,8 +401,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+static struct rt2880_pmx_func nd_sd_grp[] = {
+ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
+ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
-+};
-+
+ };
+
+-struct ralink_pinmux rt_gpio_pinmux = {
+- .mode = mode_mux,
+- .uart = uart_mux,
+- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
+- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
+static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
+ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
+ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
diff --git a/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch b/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch
index 38397ff8e1..e18b91fb77 100644
--- a/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch
+++ b/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch
@@ -5143,7 +5143,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return 1;
}
-@@ -2970,6 +2973,7 @@ static int prepare_ring(struct xhci_hcd
+@@ -2970,6 +2973,7 @@ static int prepare_ring(struct xhci_hcd
next = ring->enqueue;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
@@ -5151,7 +5151,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
/* If we're not dealing with 0.95 hardware or isoc rings
* on AMD 0.96 host, clear the chain bit.
*/
-@@ -2979,7 +2983,9 @@ static int prepare_ring(struct xhci_hcd
+@@ -2979,7 +2983,9 @@ static int prepare_ring(struct xhci_hcd
next->link.control &= cpu_to_le32(~TRB_CHAIN);
else
next->link.control |= cpu_to_le32(TRB_CHAIN);
@@ -5627,7 +5627,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-@@ -2766,7 +2910,7 @@ int xhci_check_bandwidth(struct usb_hcd
+@@ -2766,7 +2910,7 @@ int xhci_check_bandwidth(struct usb_hcd
if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
ctrl_ctx->drop_flags == 0)
return 0;
@@ -5651,7 +5651,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return xhci_calculate_intel_u2_timeout(udev, desc);
}
-@@ -4758,7 +4906,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4758,7 +4906,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
hcd->self.no_sg_constraint = 1;
/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5661,7 +5661,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
if (usb_hcd_is_primary_hcd(hcd)) {
xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4821,6 +4971,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4821,6 +4971,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
goto error;
xhci_dbg(xhci, "Reset complete\n");
@@ -5777,7 +5777,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1726,7 +1745,7 @@ void xhci_urb_free_priv(struct xhci_hcd
+@@ -1726,7 +1745,7 @@ void xhci_urb_free_priv(struct xhci_hcd
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
diff --git a/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
index 4031335b22..6aee4ad2ab 100644
--- a/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
+++ b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
@@ -109,7 +109,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
/*
* Write an address range to the flash chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -596,11 +680,8 @@ static int m25p80_write(struct mtd_info
+@@ -596,11 +680,8 @@ static int m25p80_write(struct mtd_info
return 1;
}
@@ -121,7 +121,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
page_offset = to & (flash->page_size - 1);
-@@ -608,9 +689,7 @@ static int m25p80_write(struct mtd_info
+@@ -608,9 +689,7 @@ static int m25p80_write(struct mtd_info
if (page_offset + len <= flash->page_size) {
t[1].len = len;
@@ -132,7 +132,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
} else {
u32 i;
-@@ -618,9 +697,7 @@ static int m25p80_write(struct mtd_info
+@@ -618,9 +697,7 @@ static int m25p80_write(struct mtd_info
page_size = flash->page_size - page_offset;
t[1].len = page_size;
@@ -143,7 +143,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
/* write everything in flash->page_size chunks */
for (i = page_size; i < len; i += page_size) {
-@@ -628,19 +705,12 @@ static int m25p80_write(struct mtd_info
+@@ -628,19 +705,12 @@ static int m25p80_write(struct mtd_info
if (page_size > flash->page_size)
page_size = flash->page_size;
@@ -164,7 +164,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
}
}
-@@ -1105,6 +1175,7 @@ static int m25p_probe(struct spi_device
+@@ -1105,6 +1175,7 @@ static int m25p_probe(struct spi_device
struct mtd_part_parser_data ppdata;
struct device_node *np = spi->dev.of_node;
int ret;
@@ -172,7 +172,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
-@@ -1187,6 +1258,12 @@ static int m25p_probe(struct spi_device
+@@ -1187,6 +1258,12 @@ static int m25p_probe(struct spi_device
flash->mtd._erase = m25p80_erase;
flash->mtd._read = m25p80_read;
diff --git a/target/linux/ramips/patches-3.14/0051-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.14/0051-rt5350-spi-second-device.patch
index 82f08b457d..2da815136a 100644
--- a/target/linux/ramips/patches-3.14/0051-rt5350-spi-second-device.patch
+++ b/target/linux/ramips/patches-3.14/0051-rt5350-spi-second-device.patch
@@ -189,7 +189,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
unsigned count = 0;
u8 *rx = xfer->rx_buf;
const u8 *tx = xfer->tx_buf;
-@@ -213,9 +280,9 @@ rt2880_spi_write_read(struct spi_device
+@@ -213,9 +280,9 @@ rt2880_spi_write_read(struct spi_device
if (tx) {
for (count = 0; count < xfer->len; count++) {
@@ -202,7 +202,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
if (err) {
dev_err(&spi->dev, "TX failed, err=%d\n", err);
goto out;
-@@ -225,13 +292,13 @@ rt2880_spi_write_read(struct spi_device
+@@ -225,13 +292,13 @@ rt2880_spi_write_read(struct spi_device
if (rx) {
for (count = 0; count < xfer->len; count++) {
diff --git a/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch
index 4576c8a7ba..f423de5add 100644
--- a/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch
+++ b/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch
@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2476,6 +2476,20 @@ static struct usb_device_id uvc_ids[] =
+@@ -2476,6 +2476,20 @@ static struct usb_device_id uvc_ids[] =
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_MINMAX
| UVC_QUIRK_IGNORE_SELECTOR_UNIT },
diff --git a/target/linux/ramips/patches-3.14/0058-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-3.14/0058-GPIO-add-named-gpio-exports.patch
index 9c2b39dc42..c59153c100 100644
--- a/target/linux/ramips/patches-3.14/0058-GPIO-add-named-gpio-exports.patch
+++ b/target/linux/ramips/patches-3.14/0058-GPIO-add-named-gpio-exports.patch
@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
struct gpio_desc;
-@@ -296,3 +298,69 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -302,3 +304,69 @@ void of_gpiochip_remove(struct gpio_chip
if (chip->of_node)
of_node_put(chip->of_node);
}
@@ -94,7 +94,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+device_initcall(of_gpio_export_init);
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
-@@ -803,7 +803,7 @@ static struct class gpio_class = {
+@@ -798,7 +798,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
@@ -103,17 +103,17 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
{
unsigned long flags;
int status;
-@@ -843,7 +843,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
+@@ -839,6 +839,9 @@ int gpiod_export(struct gpio_desc *desc,
if (desc->chip->names && desc->chip->names[offset])
ioname = desc->chip->names[offset];
--
+
+ if (name)
+ ioname = name;
- dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%u",
- desc_to_gpio(desc));
-@@ -880,6 +881,12 @@ fail_unlock:
++
+ dev = device_create_with_groups(&gpio_class, desc->chip->dev,
+ MKDEV(0, 0), desc, gpio_groups,
+ ioname ? ioname : "gpio%u",
+@@ -874,6 +877,12 @@ fail_unlock:
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
diff --git a/target/linux/ramips/patches-3.14/999-gpi_irq.patch b/target/linux/ramips/patches-3.14/999-gpi_irq.patch
index c4b3e57ccd..698aff97ee 100644
--- a/target/linux/ramips/patches-3.14/999-gpi_irq.patch
+++ b/target/linux/ramips/patches-3.14/999-gpi_irq.patch
@@ -20,7 +20,7 @@
spin_unlock_irqrestore(&rg->lock, flags);
}
-@@ -163,14 +164,15 @@ static void ralink_gpio_irq_mask(struct
+@@ -163,14 +164,15 @@ static void ralink_gpio_irq_mask(struct
{
struct ralink_gpio_chip *rg;
unsigned long flags;
--
cgit v1.2.3