From 2b583ab8a74a6bd41f1c9629b3b66ba561d6fceb Mon Sep 17 00:00:00 2001 From: David Bauer Date: Tue, 25 Jan 2022 21:46:54 +0100 Subject: rockchip: disable UHS modes for NanoPi R4S The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting while U-Boot requires the card to be in 3.3V mode. Remove UHS support from the SD controller so the card remains in 3.3V mode. This reduces transfer speeds but ensures a reboot whether from userspace or following a kernel panic is always working. Signed-off-by: David Bauer --- .../105-nanopi-r4s-sd-signalling.patch | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch diff --git a/target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch b/target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch new file mode 100644 index 0000000000..a04c14b70a --- /dev/null +++ b/target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch @@ -0,0 +1,26 @@ +From: David Bauer +Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S + +The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting +while U-Boot requires the card to be in 3.3V mode. + +Remove UHS support from the SD controller so the card remains in 3.3V +mode. This reduces transfer speeds but ensures a reboot whether from +userspace or following a kernel panic is always working. + +Signed-off-by: David Bauer + +--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts +@@ -121,6 +121,11 @@ + status = "disabled"; + }; + ++&sdmmc { ++ /delete-property/ sd-uhs-sdr104; ++ cap-sd-highspeed; ++}; ++ + &u2phy0_host { + phy-supply = <&vdd_5v>; + }; -- cgit v1.2.3