From 07aa858a73e6e855fc62a37ae275518fa4db5e50 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Fri, 11 Sep 2020 17:40:46 +0200 Subject: ramips: fix partitions and boot for RAVPower RP-WD03 The RAVPower RP-WD03 is a battery powered router, with an Ethernet and USB port. Due due a limitation in the vendor supplied U-Boot bootloader, we cannot exceed a 1.5 MB kernel size, as is the case with recent builds (i.e. post v19.07). This breaks both factory and sysupgrade images. To address this, use the lzma loader (loader-okli) to work around this limitation. The improvements here also address the "misplaced" U-Boot environment partition, which is located between the kernel and rootfs in the stock image / implementation. This is addressed by making use of mtd-concat, maximizing space available in the booted image. This will make sysupgrade from earlier versions impossible. Changes are based on the recently supported HooToo HT-TM05, as the hardware is almost identical (except for RAM size) and is from the same vendor (SunValley). While at it, also change the SPI frequency accordingly. Installation: - Download the needed OpenWrt install files, place them in the root of a clean TFTP server running on your computer. Rename the files as, - openwrt-ramips-mt7620-ravpower_rp-wd03-squashfs-kernel.bin => kernel - openwrt-ramips-mt7620-ravpower_rp-wd03-squashfs-rootfs.bin => rootfs - Plug the router into your computer via Ethernet - Set your computer to use 10.10.10.254 as its IP address - With your router shut down, hold down the power button until the first white LED lights up. - Push and hold the reset button and release the power button. Continue holding the reset button for 30 seconds or until it begins searching for files on your TFTP server, whichever comes first. - The router (10.10.10.128) will look for your computer at 10.10.10.254 and install the two files. Once it has finished installation, it will automatically reboot and start up OpenWrt. - Set your computer to use DHCP for its IP address Notes: - U-Boot environment can be modified, u-boot-env is preserved on initial install or sysupgrade - mtd-concat functionality is included, to leave a "hole" for u-boot-env, combining the OEM kernel and rootfs partitions Most of the changes in this commit are the work of Russell Morris (as credited below), I only wrapped them up and added compat-version. Thanks to @mpratt14 and @xabolcs for their help getting the lzma loader to work! Fixes: 5ef79af4f80f ("ramips: add support for Ravpower WD03") Suggested-by: Russell Morris Signed-off-by: Adrian Schmutzler --- package/boot/uboot-envtools/Makefile | 2 +- package/boot/uboot-envtools/files/ramips | 3 +- .../linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts | 49 +++++++++++++++++++--- target/linux/ramips/image/mt7620.mk | 18 ++++---- .../etc/uci-defaults/05_fix-compat-version | 10 +++++ 5 files changed, 68 insertions(+), 14 deletions(-) create mode 100644 target/linux/ramips/mt7620/base-files/etc/uci-defaults/05_fix-compat-version diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile index 7a27a29596..7d464f8d08 100644 --- a/package/boot/uboot-envtools/Makefile +++ b/package/boot/uboot-envtools/Makefile @@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uboot-envtools PKG_DISTNAME:=u-boot PKG_VERSION:=2020.04 -PKG_RELEASE:=2 +PKG_RELEASE:=3 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:= \ diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 6be2f6dcae..6ff04b26e8 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -33,7 +33,8 @@ xiaomi,miwifi-nano|\ zbtlink,zbt-wg2626) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000" ;; -hootoo,ht-tm05) +hootoo,ht-tm05|\ +ravpower,rp-wd03) idx="$(find_mtd_index u-boot-env)" [ -n "$idx" ] && \ ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000" diff --git a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts index 31ecd4dd85..407697a5e3 100644 --- a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts +++ b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts @@ -36,6 +36,24 @@ linux,code = ; }; }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&firmware1 &firmware2 &firmware3>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,okli"; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; }; &gpio2 { @@ -56,7 +74,8 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <50000000>; + m25p,fast-read; partitions { compatible = "fixed-partitions"; @@ -70,7 +89,7 @@ }; partition@30000 { - label = "u-boot-env"; + label = "config"; reg = <0x30000 0x10000>; read-only; }; @@ -82,9 +101,29 @@ }; partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; + label = "loader"; + reg = <0x50000 0x10000>; + read-only; + }; + + firmware2: partition@60000 { + label = "firmware2"; + reg = <0x60000 0x170000>; + }; + + partition@1d0000 { + label = "u-boot-env"; + reg = <0x1d0000 0x10000>; + }; + + firmware3: partition@1e0000 { + label = "firmware3"; + reg = <0x1e0000 0x20000>; + }; + + firmware1: partition@200000 { + label = "firmware1"; + reg = <0x200000 0x600000>; }; }; }; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index a3a468324b..d9725c9e69 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -488,11 +488,9 @@ define Device/hnet_c108 endef TARGET_DEVICES += hnet_c108 -define Device/hootoo_ht-tm05 +define Device/sunvalley_filehub_common SOC := mt7620n IMAGE_SIZE := 6144k - DEVICE_VENDOR := HooToo - DEVICE_MODEL := HT-TM05 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-i2c-ralink LOADER_TYPE := bin LOADER_FLASH_OFFS := 0x200000 @@ -505,6 +503,12 @@ define Device/hootoo_ht-tm05 IMAGE/kernel.bin := append-loader-okli $(1) | check-size 64k IMAGE/rootfs.bin := $$(sysupgrade_bin) | check-size endef + +define Device/hootoo_ht-tm05 + $(Device/sunvalley_filehub_common) + DEVICE_VENDOR := HooToo + DEVICE_MODEL := HT-TM05 +endef TARGET_DEVICES += hootoo_ht-tm05 define Device/iodata_wn-ac1167gr @@ -925,13 +929,13 @@ endef TARGET_DEVICES += ralink_mt7620a-v22sg-evb define Device/ravpower_rp-wd03 - SOC := mt7620n - IMAGE_SIZE := 7872k + $(Device/sunvalley_filehub_common) DEVICE_VENDOR := RAVPower DEVICE_MODEL := RP-WD03 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci SUPPORTED_DEVICES += ravpower,wd03 - DEFAULT := n + DEVICE_COMPAT_VERSION := 2.0 + DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (up to 19.07) due to kernel size restrictions. \ + Upgrade via sysupgrade mechanism is not possible, so new installation via TFTP is required. endef TARGET_DEVICES += ravpower_rp-wd03 diff --git a/target/linux/ramips/mt7620/base-files/etc/uci-defaults/05_fix-compat-version b/target/linux/ramips/mt7620/base-files/etc/uci-defaults/05_fix-compat-version new file mode 100644 index 0000000000..9f981dfb83 --- /dev/null +++ b/target/linux/ramips/mt7620/base-files/etc/uci-defaults/05_fix-compat-version @@ -0,0 +1,10 @@ +. /lib/functions.sh + +case "$(board_name)" in + ravpower,rp-wd03) + uci set system.@system[0].compat_version="2.0" + uci commit system + ;; +esac + +exit 0 -- cgit v1.2.3