From 056945faa4dd611298979767978f4bb2a52cabc0 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Tue, 15 Sep 2020 11:19:14 +0200 Subject: ipq40xx: enable FRITZRepeater 3000 ports on switch The ethernet ports on the AVM FRITZRepeater 3000 are not separated between LAN and WAN in the stock firmware. OpenWrt currently abstracts port 4 as eth0 and port 5 as eth1, bridging them in the kernel. This patch adjusts the GMAC port bitmasks and default bitmask for ar40xx to bridge them on the switch, avoiding traffic on both ports to pass thru the CPU. Signed-off-by: David Bauer --- target/linux/ipq40xx/base-files/etc/board.d/02_network | 5 ++++- .../files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts | 9 +++++++-- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 5c1bdc51ce..2966fbf1fb 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -61,7 +61,10 @@ ipq40xx_setup_interfaces() ucidef_add_switch "switch0" \ "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" ;; - avm,fritzrepeater-3000|\ + avm,fritzrepeater-3000) + ucidef_add_switch "switch0" \ + "0u@eth0" "4:lan:1" "5:lan:2" + ;; compex,wpj419|\ compex,wpj428|\ engenius,eap2200) diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts index 6914917eb3..6a132adade 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts @@ -58,12 +58,13 @@ ess-switch@c000000 { status = "okay"; - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; + switch_lan_bmp = <0x30>; + switch_wan_bmp = <0x02>; }; edma@c080000 { status = "okay"; + qcom,num_gmac = <1>; }; }; @@ -209,6 +210,10 @@ }; }; +&gmac0 { + vlan_tag = <1 0x30>; +}; + &cryptobam { status = "okay"; }; -- cgit v1.2.3