From 031a80762fcfcf3ac95523fd2c1a5e7acec4d41f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 19 Nov 2014 20:17:37 +0000 Subject: ar8216: after a switch reset poll until BCMR_RESET is cleared Currently there is a fixed 1000ms wait time after the switch was reset. Most if not all switches need much less time to perform a reset. Therefore replace the fixed wait time with polling for BMCR_RESET to be cleared. Signed-off-by: Heiner Kallweit Signed-off-by: Felix Fietkau git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43329 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../linux/generic/files/drivers/net/phy/ar8216.c | 32 ++++++++++++++++++++-- 1 file changed, 29 insertions(+), 3 deletions(-) diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index d57f9e5e14..276932bacc 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -316,6 +316,31 @@ split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) *page = regaddr & 0x1ff; } +/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */ +static int +ar8xxx_phy_poll_reset(struct mii_bus *bus) +{ + unsigned int sleep_msecs = 20; + int ret, elapsed, i; + + for (elapsed = sleep_msecs; elapsed <= 600; + elapsed += sleep_msecs) { + msleep(sleep_msecs); + for (i = 0; i < AR8XXX_NUM_PHYS; i++) { + ret = mdiobus_read(bus, i, MII_BMCR); + if (ret < 0) + return ret; + if (ret & BMCR_RESET) + break; + if (i == AR8XXX_NUM_PHYS - 1) { + usleep_range(1000, 2000); + return 0; + } + } + } + return -ETIMEDOUT; +} + static u32 ar8xxx_mii_read(struct ar8xxx_priv *priv, int reg) { @@ -876,7 +901,8 @@ ar8236_hw_init(struct ar8xxx_priv *priv) ADVERTISE_PAUSE_ASYM); mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); } - msleep(1000); + + ar8xxx_phy_poll_reset(bus); priv->initialized = true; return 0; @@ -964,7 +990,7 @@ ar8316_hw_init(struct ar8xxx_priv *priv) mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); } - msleep(1000); + ar8xxx_phy_poll_reset(bus); out: priv->initialized = true; @@ -1622,7 +1648,7 @@ ar8327_hw_init(struct ar8xxx_priv *priv) mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); } - msleep(1000); + ar8xxx_phy_poll_reset(bus); return 0; } -- cgit v1.2.3