aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* firmware-utils: mkfwimage: fix firmware_max_length for XM layoutJohn Crispin2016-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new u-boot version bundled with the 5.6.x firmwares from Ubiquiti gets confused by the smaller rootfs partition size; this can lead to various issues: 1. We've gotten reports that flashing from the 5.6.x stock firmware to OpenWrt will brick devices; I wasn't able to reproduce this myself 2. Flashing from 5.5.x stock firmware to OpenWrt and back to stock (via TFTP recovery), following by an update to 5.6.x via web interface can yield a bricked device with the following properties: - It can't be booted without entering commands over a serial console, as u-boot supplies the wrong MTD layout - The web interface won't accept any image with the original flash layout, so stock firmware upgrades are impossible - As the TFTP recovery doesn't update u-boot, returning to the old u-boot from firmware 5.5.x is impossible To recover from 2., creating an OpenWrt image which doesn't set u-boot as read-only and flashing a backup of the old u-boot from there is the only way known to me. (Fixing the mtdparts variable in u-boot-env from OpenWrt might also work; settings this from u-boot over serial didn't have any permanent effect.) Fix all of this by setting the correct flash layout also used by the stock firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The fixed layout also matches the mtdparts defined by OpenWrt. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r48829 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx, firmware-utils: split ubdev01 flash layout from XMJohn Crispin2016-03-011-0/+6
| | | | | | | | | | | The ubdev01 profile defines its own MTDPARTS with smaller firmware partition, so give it its own UBNT_BOARD in mkfwimage. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r48828 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warningsJohn Crispin2016-03-012-8/+6
| | | | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r48827 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: tplink-safeloader: add version 1.1 support to ↵John Crispin2016-03-011-4/+4
| | | | | | | | | | | | | | | | CPE210/220/510/520 The hardware is identical to version 1.0, add the new models to the support list. Also remove the empty line at the end of the support list, the current stock images don't have it either. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r47212 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: tplink-safeloader: fix support-list format, clean up ↵John Crispin2016-03-011-17/+30
| | | | | | | | | | | | | vendor information The first 4 bytes of the support list and the vendor information are supposed to contain the length of these fields. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r47211 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48841 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: tplink-safeloader: clean up codeJohn Crispin2016-03-011-11/+11
| | | | | | | | | | There is no reason for the internal functions not to be static. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r47210 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mkimage: cross compile fix: pass HOST_*FLAGS in to uboot's makefileFelix Fietkau2015-11-261-2/+2
| | | | | | | | | | | | The HOST_*FLAGS are for compiling programs which will run on the machine that is running the build. Setting these flags is frequently required for unusual cross-compiles. Signed-off-by: Lawrence D'Anna <larry@elder-gods.org> Backport of r46424 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: tools/pkg-config: update to 0.29Hauke Mehrtens2015-11-233-49/+7
| | | | | | | | | | | | | | | | | | | backport of r47300 Release announcement: http://lists.freedesktop.org/archives/pkg-config/2015-September/001019.html Drop patches, as they have been implemented upstream. This also fixes a build problem in the glib configure script when the user id is bigger than 2^21 - 1. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix OSX compatibility] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47608 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Bitmain Antminer S1 & S3 cleanupJohn Crispin2015-10-201-2/+7
| | | | | | | | | | | | Sets the LEDs to boardname:color:led-name Sets the LAN to eth0 Corrects the profile names in the Makefile and changes tabs to spaces in the Makefile 'define Device/' like the other devices. Other corrections such as the Machine Name and HWIDs Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47242 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bison: replace the yacc script with one that does not hardcode the path ↵Felix Fietkau2015-09-262-0/+7
| | | | | | | | | | (fixes #20605) Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r47050 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/mtd-utils: fix PKG_MIRROR_MD5SUMFelix Fietkau2015-09-211-1/+1
| | | | | | | | | | The checksum doesn't match the file on mirror2.openwrt.org. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Backport of r47010 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47011 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xz: update to version 5.2.1Hauke Mehrtens2015-08-171-2/+2
| | | | | | | | | | | | Backport of 46603. This adds support for symbol versioning which is needed on CentOs/RedHat 7 to fix #20134. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Backport support for Onion OmegaJohn Crispin2015-08-031-0/+6
| | | | | | | | | | | | Backport of r46458 to CC https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: drop circular dependency between patch and ccache, build patch ↵Felix Fietkau2015-07-262-1/+4
| | | | | | | | | | without ccache (fixes #20132) Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46434 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46498 3c298f89-4303-0410-b956-a3cf2f4a3e73
* v3: CC : ar71xx: Backport Support for the Bitmain Antminer S3John Crispin2015-07-241-0/+1
| | | | | | | | Backport of r46236 to CC : add support for the Bitmain Antminer S3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46445 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-181-0/+6
| | | | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Backport of r46046 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-181-0/+6
| | | | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> Backport of r46044 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-tools/ptgen: use stdint types for struct pteFelix Fietkau2015-06-141-7/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45957 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.Felix Fietkau2015-06-141-4/+4
| | | | | | | | They are of 32-bit little endian integers. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bc: add download mirrorsHauke Mehrtens2015-06-061-1/+4
| | | | | | | | | | | | | | Add three download mirrors for 'bc', as the Makefile currently defines only one download location. @GNU can not be used, as the most recent version of 'bc' is not available at the general GNU mirrors, and can only be found at the "gnu-alpha" mirrors. Signed-off-by: Hannu Nyman <hannu.nyman at iki.fi> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45908 3c298f89-4303-0410-b956-a3cf2f4a3e73
* gmp: disable assembly to fix build on systems that use PIE binariesFelix Fietkau2015-06-041-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45887 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimgJohn Crispin2015-06-031-7/+13
| | | | | | | | | | | | | | VGV7519 is currently the only device with brnboot support. It seems to be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to validate the checksum - it requires 0x04c11db7 instead. I have built an brnboot image manually on the command line, once with the old code and then with the new code but passing the old CRC32 poly value. Both resulted in a brnboot image with the same sha1sum. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: asustrx: support setting firmware versionRafał Miłecki2015-05-271-2/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45791 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: asustrx: new tool for TRX format with Asus tailRafał Miłecki2015-05-272-0/+247
| | | | | | | | Asus devices use TRX format with some extra data at the end. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45773 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/mtd-utils: upgrade to latest gitImre Kaloz2015-05-2613-632/+180
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45760 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: gengetopt: Disable doc and tests buildsFlorian Fainelli2015-05-221-0/+13
| | | | | | | | | | Simply disable the build of the "doc" and "tests" directories to speed up the build and avoid the potential for errors coming from external tools being used (e.g: source-highlight installed on a non-standard location). Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45713 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/mkimage: backport gcc5 compatibility, patchHauke Mehrtens2015-05-191-0/+93
| | | | | | | | | | | | | | | | | | | | | | Fedora 22 includes gcc5 by default build leads to error: include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc5.h: No such file or directory backport upstream patch: "Add linux/compiler-gcc5.h to fix builds with gcc5" id: 478b02f1a7043b673565075ea5016376f3293b23 Issue was reported at https://forum.openwrt.org/viewtopic.php?id=56853 & replicated in a VM created, flashed and tested ar71xx image successfully as test Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45703 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mktplinkfw: add flag to ignore size limit (used for initramfs images)Felix Fietkau2015-05-081-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: host/include/getline.h: fix FreeBSD 8.0+ supportImre Kaloz2015-05-081-1/+5
| | | | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45628 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/pkg-config: fix compile on musl hosts Imre Kaloz2015-05-041-0/+24
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45605 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/autoconf: fix compile on musl hosts Imre Kaloz2015-05-041-0/+24
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45604 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/sed: fix compile on musl hostsImre Kaloz2015-05-041-0/+24
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45603 3c298f89-4303-0410-b956-a3cf2f4a3e73
* make-ext4fs: avoid using libc internal declarationsJo-Philipp Wich2015-05-011-3/+3
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45591 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: drop unused genext2fsJo-Philipp Wich2015-04-205-687/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45518 3c298f89-4303-0410-b956-a3cf2f4a3e73
* all: replace genext2fs with make_ext4fsJo-Philipp Wich2015-04-202-1/+37
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45517 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: build ccache when building the sdk (fixes #13949)Felix Fietkau2015-04-031-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45266 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: replace ipkg-utils with a reduced ipkg-build variant in scripts/Felix Fietkau2015-03-2915-353/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45129 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: build mtools and dosfstools for mxsZoltan HERPAI2015-03-271-1/+1
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* automake: portability fixesJo-Philipp Wich2015-03-243-5/+59
| | | | | | | | | | | | | The rework of the host tools discovery caused automake to embed absolute paths to staging_dir/host/bin/perl into the shebang of the generated automake executables. Switch to the portable "/usr/bin/env perl" and enable global warnings through "$^W" instead of the "-w" interpreter argument. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* autoconf: portability fixesJo-Philipp Wich2015-03-243-22/+84
| | | | | | | | | | | | | The rework of the host tools discovery caused autoconf to embed absolute paths to staging_dir/host/bin/perl into the shebang of the generated autoconfig executables. Switch to the portable "/usr/bin/env perl" and enable global warnings through "$^W" instead of the "-w" interpreter argument. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dosfstools: switch back to release tarballs, update patches to the latest ↵Felix Fietkau2015-03-2216-1853/+2508
| | | | | | | | | | sent upstream This fixes non applying patches on buildbots. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: add back and update mm-macros, it is required for libsigc++Felix Fietkau2015-03-202-1/+33
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: remove leftover dependency lineFelix Fietkau2015-03-171-1/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44870 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: remove a bunch of unused automake macrosFelix Fietkau2015-03-177-509/+1
| | | | | | | | | The feeds that use them have been unmaintained for a long time, and something similar can easily be added as a regular host build package. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44869 3c298f89-4303-0410-b956-a3cf2f4a3e73
* toolchain: remove leftovers from old llvm-gcc experimentsFelix Fietkau2015-03-151-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44783 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dosfstools: fix build on OS XFelix Fietkau2015-03-151-0/+1849
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44763 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dosfstools: update to v3.0.27Felix Fietkau2015-03-151-7/+15
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44762 3c298f89-4303-0410-b956-a3cf2f4a3e73
* patch: bump GNU patch to 2.7.5Felix Fietkau2015-03-151-3/+3
| | | | | | | | | Bump GNU patch in tools from 2.7.1 to 2.7.5. Change download URL to use @GNU alias. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44760 3c298f89-4303-0410-b956-a3cf2f4a3e73
* disable silent-rules by defaultMirko Vogt2015-03-121-1/+4
| | | | | | | | | | | | OpenWrt hides verbose output by default, regardless of automake silent-rules being en-/disabled. If we enable verbose output for package builds (V=s) however, we'd like to see as most as possible. Signed-off-by: Mirko Vogt <mirko@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44685 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Do not use $(V) - force AM_V=1Mirko Vogt2015-03-121-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Projects using silent-rules might otherwise fail to compile. This is due to the following resulting Makefile code: AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : Automake directly uses $(V) for variable name expansion which fails if $(V) is set to sth. else other than '0' or '1'. This patch forces automake to not take $(V) into account but to always use the default config for verbosity. A better approach would be to actually take $(V) into account, however not just pass it through (AM_V='$(V)') but set AM_V to 0 if $V=0 / unset and to 1 otherwise. This plan however is foiled due to my frustration about automake as well as my lack of m4 skills. automake bug report: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=20077 Signed-off-by: Mirko Vogt <mirko@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44684 3c298f89-4303-0410-b956-a3cf2f4a3e73